REVIEWS AND NEWS
41C
Supramaniam Srinivasan
The fuel cell is a nineteenth century invention and a twentieth century technology development. Hydrogen‐oxygen fuel cell systems have no competition as auxiliary power sources for space vehicles. The alkaline fuel cell system is a proven technology for this application. The solid polymer electrolyte system may be its future competitor. The energy crisis of 1973 stimulated research, development, and demonstration of the phosphoric acid, molten carbonate, solid oxide, and solid polymer electrolyte fuel cell systems using natural gas, petroleum, or coal‐derived hydrogen (and carbon monoxide for the high temperature systems) for terrestrial applications. The direct methanol‐air fuel cell is still an electrochemist's dream. The present price of crude oil, and the high capital costs and limited lifetime of fuel cell systems impede their terrestrial applications in the developed countries. Conversely, the potential for lower capital costs of labor intensive manufacturing processes and the higher fossil fuel prices make these systems more attractive for such applications in the developing countries.
The Edward G. Weston Summer Fellowship Award REVIEWS AND NEWS
49C
Charles S. Amass
The Joseph W. Richards Summer Fellowship Report REVIEWS AND NEWS
50C
David W. Conrad
The Colin Garfield Fink Summer Fellowship Award REVIEWS AND NEWS
53C
Daniel T. Schwartz
Electrochemical Science and Technology TECHNICAL PAPERS
293
E. Lojou, R. Messina, J. Perichon, J. P. Descroix and G. Sarre
299
E. Lojou, R. Messina, J. Perichon, J. P. Descroix and G. Sarre
303
M. C. H. McKubre, F. L. Tanzella and S. I. Smedley
306
Tetsuya Osaka, Satoshi Ogano, Katsuhiko Naoi and Noboru Oyama
310
Earl H. Hietbrink and Robert F. Hill
The zinc/nickel oxide battery system is presently being investigated for future electric vehicle related applications that require good energy storage and high power characteristics. For these applications, however, this battery system is somewhat hindered by the loss of performance on deep discharge cycling due to a gradual migration of the zinc active material. To investigate why, where, and to what extent the zinc migrates during cycling, radiotracer techniques were developed and used to measure electrolyte movement and zinc migration in situ without disturbing the operation of the cell. This novel application of radiotracers to the study of the zinc/nickel oxide battery system has provided new and unique information. The findings indicate that electrolyte movement by forced convection in an operating cell overwhelms electrolyte movement due to natural convection processes, and that this movement is radially outward and inward from the center of the electrode pack during charge and discharge, respectively. The radiotracer zinc studies indicated that zinc migration at the top of the electrode pack is five times higher than at the center of the electrode pack. Autoradiograms of the electrodes before and after cycling confirmed earlier studies that zinc migrates to the nickel electrodes, and, in addition, showed that this zinc transfer is directly from the zinc electrodes through the separators to the nickel electrodes. The amount of zinc transferred depends upon the operating history of the cell and the location within the electrode pack. These results will help direct future development work to enhance the life and performance of deep discharge zinc/nickel oxide battery systems.
319
K. Kuwabara, K. Hanafusa and K. Sugiyama
323
R. W. Berg, H. A. Hjuler, A. P. L. So̸ndergaard and N. J. Bjerrum
328
T. I. Evans, T. V. Nguyen and R. E. White
A one‐dimensional mathematical model for the lithium/thionyl chloride primary cell has been developed to investigate methods of improving its performance and safety. The model includes many of the components of a typical lithium/thionyl chloride cell such as the porous lithium chloride film which forms on the lithium anode surface. The governing equations are formulated from fundamental conservation laws using porous electrode theory and concentrated solution theory. The model is used to predict one‐dimensional, time dependent profiles of concentration, porosity, current, and potential as well as cell temperature and voltage. When a certain discharge rate is required, the model can be used to determine the design criteria and operating variables which yield high cell capacities. Model predictions can be used to establish operational and design limits within which the thermal runaway problem, inherent in these cells, can be avoided.
340
Shigeto Okada, Jun‐ichi Yamaki and Takeshi Okada
345
C. David Desjardins, Gregory K. MacLean and Hossein Sharifian
Passivating films formed on lithium in
electrolyte have been analyzed using the AC impedance technique. The complex plane impedance analysis of the lithium electrode under polarization show two types of behavior. The first type is observed for discharge overpotentials less than 250 mV. In this case, the electrode impedance decreases with increasing anodic overpotentials. The second type is observed for overpotentials greater than 250 mV. The electrode impedance in the second case increases continuously with increasing voltage. Critical values for current densities which would allow cell cycling without a major deterioration of the electrochemical properties of the lithium electrode have been assessed. In addition, mechanical and electrochemical surface treatment methods have been studied in order to determine their effect on the initial AC impedance parameters of lithium electrodes in
electrolytes.
349
Mark R. Deakin and Owen R. Melroy
We report the application of the quartz crystal microbalance (QCM) to the in situ study of the oxidation of aluminum in a solution of ethylene glycol and ammonium pentaborate. The mass to charge ratio of the oxide film measured by the QCM during the oxidation varied between 8.2 and 6.6 g equiv−1, suggesting the growth of an
film. The composition of the film was confirmed by XPS. The density of the film was determined from the QCM data and ellipsometric measurements. The obtained value of
is in excellent agreement with the literature. These measurements represent the first use of the QCM to study quantitatively the growth and dissolution of thick passive oxide films.
352
F. Climent, R. Capellades, E. Garcia and J. Gil
A theoretical model for Ta anodic oxidation is developed. The electrolyte voltage drop is considered. The electrolyte resistance does not modify the expected voltage behavior in constant current oxidation. The current behavior in constant voltage oxidation is conditioned by the electrolyte voltage drop. When the voltage drop is near the oxidation voltage, the current can show a logarithmic behavior due to voltage increase in oxide/electrolyte interphase. A set of experiments with two different morphologies, wire and sintered anodes, is considered in order to verify the theoretical model.
356
W. C. Moshier, G. D. Davis and G. O. Cote
362
D. J. Beckstead, G. M. Pepin and J. L. Ord
368
Oscar Lanzi III, Uziel Landau, Jonathan D. Reid and Raymond T. Galasco
In through‐hole plating, the deposition kinetics parameters may vary with position. The resulting effects of these variations on the current and potential distributions in through‐hole plating are quantitatively analyzed. It is shown that, under current densities of practical interest, the potential distribution along through‐holes can be approximated by a quadratic function which is only slightly affected by kinetics. Consequently, the kinetic variations are directly manifested in the current distribution along the hole. It is also shown that, in some cases, additives may affect the kinetics in such a way as to strongly influence the current distribution.
374
S. Swathirajan and Youssef M. Mikhail
The rate limiting factors of the electrodeposition of nickel‐zinc‐phosphorus alloys at a rotating cylinder electrode have been determined using the partial deposition currents of the alloy components. The mass‐transfer coefficient for the rotating cylinder shows that the electrode probably behaves as a hydrodynamically smooth electrode during the
deposition process. A zinc current plateau observed at lower temperatures (≤60°C) and higher currents (>0.5 A/cm2) is probably due to mass‐transfer limitation of the zinc deposition reaction. At low currents, the alloy deposition process is controlled by zinc deposition at lower temperatures (<60°C) and by the deposition of nickel at higher temperatures. At high current densities, the alloy deposition is under the mixed control of the deposition of both nickel and zinc.
378
A. Molenaar and J. W. G. de Bakker
Electroless tin can be deposited by means of a disproportionation reaction in alkaline solution. The initiation of the reaction has been studied and the optimum concentrations of the bath compounds were determined. Hydroxy compounds were shown to be applicable as stabilizers. From 119Sn NMR measurements on tin(II) compounds of hydroxystannite and stabilizers in combination with deposition rate measurements information about the disproportionation reaction at the tin surface has been derived. Whisker growth of the electroless tin layer was prevented by a lead top layer, prepared by an electrochemical exchange reaction.
382
T. Cotting, H. von Känel, G. Leicht and F. Lévy
385
M. Razaq, A. Razaq, E. Yeager, Darryl D. DesMarteau and S. Singh
The addition of 0.5 weight percent (w/o) of the perfluorosulfonimide (PFSI),
, as an additive to 85%
in hydrogen‐oxygen fuel cell results in a 70 mV increase in the potential of the oxygen cathode (high surface area, 10% Pt on Vulcan XC‐72) at current densities up to 500 mA cm−2 at 70°C. This improvement is proposed to be due to the enhanced oxygen reduction kinetics caused by a physically adsorbed layer of the PFSI on the catalyst with the fluorocarbon tail toward the surface. The adsorbed layer creates a “dry cave” environment adjacent to the electrode surface which favors the competitive adsorption of oxygen on the catalyst surface. This adsorbed layer apparently does not interfere with water or proton transfer from or to the interface. Flooding of the gas structure of the porous cathode has not been observed at 0.5 w/o of the PFSI but has been observed at higher concentrations.
390
P. K. Andersen, R. H. Muller and C. W. Tobias
The enhancement of limiting currents by inert suspended solids was studied using a rotating‐disk electrode (RDE). The suspensions contained glass or polymer particles in various sizes (1–100 μm) and concentrations (up to 40 v/o solids). Solid particles the same size as, or smaller than, the thickness of the mass‐transfer boundary layer create small‐scale “microconvective” vortices. Particles much larger than the boundary‐layer thickness appear to enhance transport by a different mechanism, possibly involving the formation of particle‐free wall layers. Disk‐torque measurements show that substantial increases in the limiting current require significantly less stirring power using the suspensions than by increasing the rotation rate without solids.
399
Anthony M. Pesco and Huk Y. Cheh
Calculations are performed for the purpose of determining the steady‐state behavior of plated through‐holes with various aspect ratios during the dc electrodeposition of copper over a wide range of operating conditions. The results indicate that when electrolyte flow is restricted the maximum average current density possible within the through‐holes is much less than 1 mA/cm2 and the current distribution is considerably nonuniform for the high aspect ratio through‐holes. Higher average current densities within the through‐holes are possible only when flow of electrolyte is induced. However, the current distribution remains nonuniform for the high aspect ratio holes. While periodic flow reversal has been shown to improve the current distribution under mass‐transfer limiting situations, the results indicated that the effect on the current distribution will not be significant when operating well below the limiting current density for deposition.
408
Anthony M. Pesco and Huk Y. Cheh
A model is presented for the purpose of determining the transient behavior of a plated through‐hole system during electrolysis with a periodic applied potential, including the effects of mass transfer, charge transfer, and ohmic resistance. Calculations are performed for through‐holes of various aspect ratios during the periodic electrodeposition of copper. The results indicate that electrolysis with a rectangular‐pulse applied potential causes the current distribution to be less uniform than dc electrolysis at the same average rate of plating. The results also indicate that electrolysis with a periodic‐reverse applied potential appears to be a promising technique for obtaining a more uniform current distribution in this particular system.
414
Marvin A. Genshaw and James E. Jones
A sensor which responds very well to glucose in whole blood has been produced. Glucose oxidase is directly coupled to the platinum electrode by a silane coupling agent and is then cross‐linked with glutaraldehyde. This very thin catalytic layer is then covered with a rubber membrane. The response to glucose in whole blood is linear to at least 600 mg/dl with a small positive intercept. The response time is a few minutes. The key factor in the success of this sensor is the unitized construction in which the membrane and enzyme are chemibonded to the electrode. The compatibility with whole blood and high oxygen permeability of the membrane also contribute to the good performance.
417
Mark W. Verbrugge
The transport of methanol through a commercially available perfluorinated ion‐exchange membrane containing an aqueous 1N sulfuric acid solution is characterized. To accomplish this task, a mathematical model capable of simulating quantitatively methanol‐transport experiments is developed, and an optimization routine is employed to obtain physicochemical coefficients for the system by comparing experimental and theoretical results. The chemical environment employed in this work is similar to that which is present in a methanol fuel cell. Perhaps most important, results of this work illustrate that methanol readily transports across the perfluorinated membranes—consequently, new membrane systems should be investigated for methanol fuel cells.
424
S. D. Jones and G. E. Blomgren
427
David E. Stilwell and Su‐Moon Park
In situ spectroelectrochemical studies have been carried out on polyaniline films formed on a reflective platinum disk electrode in acidic media by means of near‐normal incidence reflectance spectroelectrochemical techniques. The results indicate that there are four optically different species depending on the potential applied to the electrode. These are a leuco form absorbing at ∼320 nm, a radical cation at ∼440 nm, delocalized free electron states at ∼800 nm, and a quinoid form absorbing at ∼650 nm. The two forms, leuco and quinoid, are insulators, while the other two are conducting forms. Chemical transformations of these species into each other were also studied by derivative cyclic voltabsorptometry and the results are discussed.
434
K. M. Sundberg, W. H. Smyrl, Lj. Atanasoska and R. Atanasoski
The reduction of oxygen on rotating disk glassy carbon electrodes was studied in
. Reproducible single waves with constant limiting currents over a potential range of 0.5V were obtained after the samples were electrochemically treated: anodic polarization at 2.0V vs. SCE and subsequent cathodic reduction. The number of electrons transferred in the oxygen reduction reaction was calculated to be 2.3. The surface of the glassy carbon was examined by XPS at different stages of the electrochemical treatment. After the anodic treatment, the ratio of oxidized carbon vs. graphitic carbon was higher than 1. The predominant oxygen species were carbonyl groups. Following reduction, the surface had an oxidizedvs. graphitic carbon ratio below 0.5 with the oxygen distributed between phenolic and carboxylic groups. The role of the chloride ion in the formation of the carbonyl groups is discussed.
439
Kurt H. Stern
442
M. R. Kozlowski, P. S. Tyler, W. H. Smyrl and R. T. Atanasoski
Solid‐State Science and Technology TECHNICAL PAPERS
451
S. Nakahara
A transmission electron microscope was used to study inclusions in cobalt‐hardened gold electrodeposits. The fine (∼350Å)‐grained deposits contain a high
density of small (∼25Å) inclusions. During dissolution of the deposit in aqua regia, these inclusions agglomerate on the gold film surface and finally form a “polymer” film. From an electron diffraction analysis, the “polymer” film was found to contain both amorphous and crystalline phases. The crystalline phase was identified to be a cobalt‐cyanide complex, the structure of which agrees with previous x‐ray results. In addition to the cobalt‐cyanide complex, we discovered the inclusions of
crystals.
456
Chiu H. Ting and M. Paunovic
Selective electroless metal deposition process was studied for its applications in integrated circuit fabrication. Compared to selective metal deposition by CVD process, such as the selective tungsten deposition process, the selective electroless deposition process is more attractive due to its simplicity as well as process flexibility. A variety of material such as Ni, Co, Pd, and Cu were studied for contact filling, via filling, and for conductor patterns. These materials were selectively deposited on a variety of surfaces such as silicon, silicide, Al‐Si, through patterned CVD silicon dioxide, CVD silicon oxynitride, and photoresist. Although this process is still in its early stage of development, very promising results have already been achieved. The experimental conditions and results for selectively filled contact holes, via holes, and conductor patterns are described using actual examples.
462
C. H. Ting, M. Paunovic, P. L. Pai and G. Chiu
Selective electroless metal deposition process is investigated for via hole filling to provide a planar surface for the fabrication of high density multilevel interconnections. The substrates used in this work consisted of a 1.0 μm thick Al layer covered with 1.0–1.5 μm thick CVD silicon dioxide layer. Via holes of 1.5 μm nominal size are formed in the oxide layer by plasma etching. Selective deposition of Ni is achieved by first activating the Al surface in a Pd solution, Ni is then deposited on the activated surface from an aqueous solution using dimethylamineborane or hypophosphite as reducing agents. Pd can be selectively deposited directly on the Al surface without the need of surface activation. Either hypophosphite or hydrazine is used as the reducing agent in the Pd deposition solution. Cobalt can also be selectively deposited to fill the via holes. The filled via holes can have almost perfectly planar surface. Good contact resistance has been obtained by measuring the via chain resistance.
466
D. ‐S. Wen, P. Smith, C. M. Osburn and G. A. Rozgonyi
472
Leonard V. Interrante, Wei Lee, Malcolm McConnell, Nathan Lewis and Ernie Hall
Polycrystalline aluminum nitride films were deposited on silicon and silica substrates at 400°–800°C in a low pressure chemical vapor deposition system using the volatile organometallic precursor,
. Under appropriate conditions of substrate temperature and growth rate, the films were transparent, smooth, and highly adherent to the substrate. Auger electron spectroscopy indicated that these films contained close to a one‐to‐one ratio of aluminum to nitrogen and relatively low concentrations of carbon and oxygen. X‐ray and electron diffraction studies showed that the 2H (hexagonal,
;
) phase of aluminum nitride was the only crystalline product. Scanning and transmission electron microscopy indicated a dense, polycrystalline microstructure with an
grain size range of 0.05–1.00 μm, depending on the deposition conditions. Films deposited on silica at or above 600°C were transparent in the visible and near infrared with an absorption edge of ca. 6.2 eV. Fourier transform infrared spectra of the films on silicon showed the characteristic Al‐N stretching vibration at
with relatively weak and broad bands in the N‐H and C‐H stretching region. Current‐voltage and capacitance‐voltage measurements were performed on aluminum nitride films deposited on Si (100), yielding values for the dielectric constant, field breakdown strength, and resistivity. The effects of annealing in a nitrogen atmosphere up to 800°C were studied using UV‐visible and FTIR absorption spectroscopy. The rate of dissolution of the
films in phosphoric acid was also determined. These results indicate that
can be used as a single‐component precursor for the low pressure deposition of aluminum nitride films at temperatures as low as 500°C, and that the films obtained at or above 600°C have microstructural features and properties appropriate for microelectronic applications.
478
Jun‐ichi Nishizawa, Hitoshi Abe and Toru Kurabayashi
484
L. A. Zazzera and J. F. Moulder
X‐ray photoelectron spectroscopy and secondary ion mass spectrometry are used to study the surface chemistry of silicon single‐crystal wafers. Anhydrous
and UV/ozone processes modify the surface chemistry by altering the concentration and bonding environments of the most abundant surface atoms: Si, O, C, H, and F. Anhydrous
in conjunction with water vapor
removes the silicon native oxide. Native oxides with initial thicknesses of 11Å, four monolayers, are exposed to a
rinse,
, and an aqueous
rinse and are reduced to 0.4, 0.2, and 0.1 monolayers, respectively. The carbon concentration exhibits an inverse relationship with the submonolayer oxide coverage. The
process results in less than a monolayer of silicon fluorides. The silicon fluoride species decrease with air exposure resulting in mostly oxyfluorides after 1h. Rinsing the fluorinated surface with
reduces the fluorine concentration, removes trace metal impurities initially bonded to the native oxide, and promotes initial
formation. UV/ozone exposure reduces the hydrocarbon concentration on the
surface while producing 8Å, three monolayers, of
. Exposing the
surface to UV/ozone removes the silicon fluoride species; only oxyfluorides are observed with the ozone‐induced
. The cleanest silicon surface with respect to metallic and hydrocarbon impurities was achieved with a 
rinse‐UV/ozone oxidation process.
491
J. W. Palmour, B. E. Williams, P. Astell‐Burt and R. F. Davis
495
Linda S. Heath, Doran D. Smith, Mitra Dutta, Monica A. Taysing‐Lara and Timothy P. Monahan
497
R. Allen Bowling and Graydon B. Larrabee
This paper will describe theoretical calculations of the gravitational fall of particles in vacuum as a function of pressure and particle size, and will give confirming experimental observations of particle deposition on silicon wafers in a test vacuum system. Also, using silicon wafers as test vehicles, observations will be described about the effects of wafer orientation, pumpdown and venting rates, and moving parts on the generation and behavior of particles in a vacuum system. Further confirmation of these results will be presented through the use of a modified laser particle counter in vacuum to directly measure particles in the vacuum chamber.
502
J. W. Palmour, R. F. Davis, H. S. Kong, S. F. Corcoran and D. P. Griffis
508
Masayuki Endo, Masaru Sasago, Yoshihiko Hirai, Kazufumi Ogawa and Takeshi Ishihara
A new water‐soluble contrast enhancing material (CEM) has been developed for use with i‐line (365 nm) lithography. The CEM is composed of poly (p‐styrene sulfonic acid), p‐morpholinobenzene diazonium chloride zinc chloride salt and deionized water. The poly (p‐styrene sulfonic acid) effectively prevents degradation of the diazonium salt in water and therefore stabilizes the formulation. Resolutions of 0.5 μm are demonstrated Using conventional photoresist with the water‐soluble CEM. The method is easy to use compared to earlier contrast enhancing materials, in that no barrier coating or special stripping of the CEM is required.
511
R. Sinclair, K. B. Kim, O. Shippou and H. Iwasaki
The structure of a thin (10 nm) oxide, grown in micron‐sized trenches in silicon, has been studied by high resolution electron microscopy (HREM). The trenches were produced in {100} wafers by dry etching, and have {110} sidewalls and {100} bottom surfaces. Oxidation was carried out at 1125°C by rapid thermal annealing in pure, dry
to produce a nominal 10 nm oxide on the top wafer surface. It is found that the oxide is largely smooth and continuous, with minimal
protrusions. However, the oxide thickness varies significantly around the trench, being thickest at the {110} sidewalls and thinnest in the inner, concave corners. In addition the latter are distinctly faceted on {111} and {311} planes. It is thought that crystallography plays an important role in the variation of trench structure after oxidation.
518
R. Hezel and K. Jaeger
Low‐temperature‐deposited silicon nitride and aluminum oxide films are investigated for reducing carrier recombination at the silicon surface. The insulator/silicon interface properties (fixed charge density, fast interface state density, and surface recombination velocity) are studied as a function of deposition and annealing temperature in the range of 270°–550°C. The effects of UV irradiation and their elimination by charge‐induced passivation are extensively discussed. The successful application of both films for front surface passivation of a novel thin‐silicon solar cell of the back collection type (BACK‐MIS cell) is demonstrated. Finally, a simple configuration for efficient back surface passivation of solar cells is introduced as a possible substitute for the conventional back surface field.
524
Per Carlsson, Kohei Uosaki, B. Holmström and Hideaki Kita
528
Masahiro Kamata, Yasuhiko Ito, Mikio Inoue and Jun Oishi
Thermoelectric power measurements were carried out in
systems. The thermoelectric power shows different behavior according to the composition and the phase state of the electrode. This behavior has been explained thermodynamically.
534
Toshio Usui, Akiyoshi Asada, Mitsuhiro Nakazawa and Hiroshi Osanai
A new type of oxygen sensor using the electrochemical oxygen pump of a zirconia electrolyte and the artificial oxygen diffusion overpotential behavior has been investigated from the theoretical and practical viewpoints of the “gas polarography,” the concept of which is proposed in this paper. This new oxygen sensor has excellent oxygen sensing characteristics analogous to polarography. As a result of the artificial oxygen diffusion overpotential at the cathode, the reproducible limiting current relating to the oxygen concentration was observed over a wide oxygen concentration range up to 95% and a temperature range of 400°–700°C in
gas mixtures. In this paper, the factors influencing the limiting current in the normal diffusion region, that is, the oxygen molar fraction, gaseous diffusion coefficients, the temperature, the pressure, and the two geometric quantities (area and length) of the gas diffusion hole are theoretically considered.
542
Joseph V. Mantese, Aboud H. Hamdi, Harry W. Sturner, Zu H. Zhang and K. R. Padmanabhan
Thin films of porous alumina were formed from an alumina sol which was cured at 500°C in either air or oxygen. We have determined, from a simple RBS marker experiment, that alumina films made from this sol have a volume porosity of about 50%, which is substantially different from bulk structures formed from this material. Ellipsometric measurements were also carried out to determine the porosity of these films. Our analysis shows an excellent agreement between the two measurements. No change in film porosity was found to occur after annealing at 900°C for 60 min in oxygen.
545
J. P. Orchard and D. J. Young
551
Urban Ekhult and Torbjörn Carlberg
555
S. M. Gupte and J. A. Tsamopoulos
A mathematical model that describes the combined diffusion and reaction of trichloromethylsilane in a porous preform under typical chemical vapor infiltration (CVI) conditions is presented. The model utilizes a single pore to demonstrate the importance of the pore geometry, total gaseous pressure, temperature, and imposed temperature gradient on the degree of achieved densification. By focusing attention on a single pore, it is possible to account for changes in the pore shape that occur during deposition of silicon carbide on the pore boundaries. Process conditions for operation in the reaction‐controlled regime in order to attain complete densification are quantitatively identified even for the longer pores and the relatively higher temperatures used.
562
H. S. Kiliaan and G. Blasse
567
Chu Zhu, Frank V. Bright, Wayde A. Wyatt and Gary M. Hieftje
A new fiber‐optic sensor (optrode) for humidity has been developed. The sensor utilizes a fluorescent dye entrapped within a perfluorinated ionomer matrix. The fluorescence intensity increases strongly and linearly with increasing watervapor partial pressure even though the lifetime of fluorescence is simultaneously lowered. The response time of the optrode is approximately 1s and the presence of
has no detectable effect on the determination of humidity. Apparently, the immobilized fluorescent dye, rhodamine 6G, associates with water to form a complex with a higher absorptivity. The dependence of fluorescence lifetime on emission wavelength revealed the coexistence of multiple excited states for the water‐dye system.
570
C. R. Ronda and B. M. J. Smets
This paper consists of two parts. In the first part the chemical composition of two kinds of barium hexaaluminate (one poor and one rich in barium) is explained using the local electroneutrality concept. In the second part a reinvestigation of the Eu2+ luminescence in these compounds is reported. The emission spectrum of each of the two compounds shows two emission bands: a blue and a green emission band, indicating the presence of two Eu2+ sites. The blue emission band is ascribed to Eu2+ ions at barium sites, whereas the green emission band is identified with Eu2+ ions incorporated at aluminum sites within spinel blocks of the structure.
TECHNICAL NOTE
574
A. Auerbach and D. Doersam
ACCELERATED BRIEF COMMUNICATIONS
576
K. M. Abraham, D. M. Pasquariello and E. B. Willstaedt
578
J. Manassen and I. Cabasso
580
Thomas R. Blackburn and Gleb Mamantov
582
Yonhua Tzeng
584
Michael J. Armstrong and Rolf H. Muller
586
S. S. Tsao, T. R. Guilinger, M. J. Kelly and P. J. Clews
588
Gary J. Gerardi and Edward H. Poindexter
590
Hiromichi Aono, Eisuke Sugimoto, Yoshihiko Sadaoka, Nobuhito Imanaka and Gin‐ya Adachi