Abstract
Passivating films formed on lithium in
electrolyte have been analyzed using the AC impedance technique. The complex plane impedance analysis of the lithium electrode under polarization show two types of behavior. The first type is observed for discharge overpotentials less than 250 mV. In this case, the electrode impedance decreases with increasing anodic overpotentials. The second type is observed for overpotentials greater than 250 mV. The electrode impedance in the second case increases continuously with increasing voltage. Critical values for current densities which would allow cell cycling without a major deterioration of the electrochemical properties of the lithium electrode have been assessed. In addition, mechanical and electrochemical surface treatment methods have been studied in order to determine their effect on the initial AC impedance parameters of lithium electrodes in
electrolytes.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
