The electrochemistry and photoelectrochemistry of nominal one monolayer coverages of Equation or symbol description not availableRuO2 deposited by thermal decomposition of Equation or symbol description not availableRuCl3 on anodically grown Equation or symbol description not availableTiO2 films are examined. The anodic Equation or symbol description not availableTiO2 films, characterized by electron diffraction before and after thermal treatment, were found to be polycrystalline rutile. Anodic films grown by potential step polarization did not allow penetration of Equation or symbol description not availableRuO2 into the film. Conversely, Equation or symbol description not availableTiO2 films grown at potential ramping rates of 0.1 mV/s had a structure which allowed Equation or symbol description not availableRuO2 to penetrate into the film along Equation or symbol description not availableTiO2 grain boundaries. Surface films ofEquation or symbol description not availableRuO2 exhibited an electrocatalytic effect but also strongly reduced the photocurrent response. Equation or symbol description not availableRuO2 additions to the films which did penetrate the oxide acted as nonelectrocatalytically active species within the Equation or symbol description not availableTiO2 layer and had little effect on the photocurrent response of the oxide film. A model of Equation or symbol description not availableRuO2 distribution at the surface and along the grain boundaries ofEquation or symbol description not availableTiO2 crystallites is considered.