REVIEWS AND NEWS
363C
Su‐Moon Park
Electrochemistry of carbonaceous material and coal is reviewed comprehensively. The subject is divided into five categories: electrochemistry of various forms of carbon, chemical oxidation and reduction of coal, electrochemical oxidation and reduction of coal, photoelectrochemistry of coal, and direct power generation from coal burning fuel cells. Oxidation of coal by air or oxygen and reduction through hydrogenation reactions are not included in this review. Only reports relevant to solution chemistry are included. Characterization and derivatization of coal and carbonaceous material employing the above electrochemical reactions are discussed in each section.
374C
Richard D. Varjian and Dale E. Hall
402C
Peggy A. Barron
ELECTROCHEMICAL SCIENCE AND TECHNOLOGY TECHNICAL PAPERS
1971
M. Menetrier, A. Levasseur and P. Hagenmuller
1973
G. G. Barna, S. N. Frank, T. H. Teherani and L. D. Weedon
1980
N. Watanabe, R. Hagiwara and T. Nakajima
1985
Michael Binder, Sol Gilman, William Wade Jr. and Charles Walker Jr.
1991
Yoshiharu Matsuda, Masayuki Morita and Ken‐ichi Takata
1996
S. Szpak, C. J. Gabriel and J. R. Driscoll
A general method for computing parasitic intercell currents in series connected electrochemical cells with common electrolytic path is described. This method covers systems operating with constant as well as variable parameters such as usually are encountered in practice. The
battery is selected to illustrate the evolution of parasitic intercell currents in the course of battery discharge.
2006
Y. Takeda, R. Kanno, Y. Tsuji and O. Yamamoto
2010
J. Hubrecht, J. Vereecken and M. Piens
2016
M. Keddam, J. ‐F. Lizee, C. Pallotta and H. Takenouti
Wide frequency range impedance measurements are applied to a kinetic investigation of passive iron in various acidic media. Special care was taken in the electrode preparation to reach stable current densities
. Impedance data were obtained as a function of potential and temperature in the steady state. An original approach to the nonsteady‐state behavior is introduced by combining transient response to the time dependence of the impedance. Contributions from transport in the film and interfacial impedance are separated. The classical view of high field conduction mechanism is refined with respect to the generality of the description and also to the film properties in various environments leading to the concept of chemically dependent high field ion migration. Low frequency behavior in the millihertz range supported this conclusion by ruling out the idea of diffusion‐controlled passive current. The capacitance observed is attributed to the film‐growth kinetics.
2024
Andrzej Wieckowski, Edward Ghali and Huy Ha Le
Cyclic voltammetric studies were carried out for an iron electrode and for pressure vessel quality steel A516 in 1 and 7.73M sodium hydroxide solutions as a function of temperature. Cyclic voltammograms for strained electrodes of steel were also made. The stress corrosion cracking susceptibility was measured by the slow strain rate method. The examined temperature range was between 25° and 105°C. A correlation was found between the electrochemical behavior of unstrained electrodes (cyclovoltammograms) and the susceptibility to caustic cracking. A critical zone of temperatures, above which cyclic voltammograms are sensibly different and stress corrosion cracking occurs, was obtained.
2028
R. N. O'Brien, N. S. Sundaresan and K. S. V. Santhanam
2032
R. N. Bhattacharya and K. Rajeshwar
2037
H. J. Gerritsen, W. Ruppel and P. Würfel
Charge and energy storage is presented for a photoelectrochemical cell, in which in a
electrolyte one electrode,
, is photodecomposed under illumination, and the other electrode,
, is photoelectroplated by Cd. These processes lead to a galvanic cell with Se on
as one electrode, and Cd on
as the other electrode. The discharge products, when the cell is discharged in the dark, are the original photosensitive semiconductors. Each of these photosensitive electrodes, as well as their combined performance, is discussed, together with the source of irreversibilities for this method of photoelectrochemical energy conversion.
2042
James H. Reeves and Michael Cocivera
2048
D. H. M. W. Thewissen, A. H. A. Tinnemans, E. A. van der Zouwen‐Assink, A. Mackor, H. von Känel, R. Hauger and P. Wachter
2054
William Y. Hsu
The effective medium theory is applied to delineate transport and elastic properties of perfluorinated ionomers and their blends. The predicted critical dependence of current efficiency on blend morphology is verified experimentally in sulfonate/carboxylate and sulfonamide/carboxylate blends.
2058
M. Elam, E. Peled and E. Gileadi
2062
C. Y. Yuh and J. R. Selman
A dual‐porosity, agglomerate‐type model for the porous anode and cathode of the molten carbonate fuel cell is developed and used to predict electrode performance in a small, differential‐conversion, cell. The model is based on a phenomenological treatment of mass transport, electrode kinetics, and ionic conduction, combined with structural assumptions. The model predicts the steady‐state performance, given a minimum number of structural parameters. Comparison with experimental data for a 3 cm2 anode and cathode shows good agreement for plausible values of these parameters.
2069
C. A. Pickles and S. N. Flengas
The thermodynamic properties of the quarternary molten salt system
have been investigated by EMF measurements using a formation cell of the type

It was found that the partial molar free energies of mixing of
in the quarternary solutions are well represented by a previously developed expression given as

which is valid at constant
. In this expression,
etc. refer to the corresponding partial molar free energy of
in the designated binary system having the same
content as the quarternary. The composition parameters
and
are defined as

,

2075
M. H. Miles, G. E. McManis and A. N. Fletcher
2081
H. Morisaki, H. Ono and K. Yazawa
The photoelectrochemical properties of
were studied in aqueous electrolytes. The onset potential of the anodic photocurrent in steady state was found to be about 1V more anodic than that of the photocurrent measured by the lock‐in method (−2V vs. SCE). This discrepancy was ascribed to the presence of transient photocurrent observed in the potential range between −1.9 and +0.6V vs. SCE. Possible mechanisms of the transient photoresponse were examined. The flatband potential deduced from the Mott‐Schottky plot of the C‐V characteristics was found to shift into the cathodic direction of potential in the course of the photoelectrochemical measurements. The shift was explained by a hypothesis that thin oxide layer grows on the
surface during anodic polarization under strong illumination.
2086
Kingo Itaya, Isamu Uchida, Shinobu Toshima and Richard M. De La Rue
TECHNICAL NOTE
2092
J. H. Kaufman, T. ‐C. Chung, A. J. Heeger and F. Wudl
SOLID-STATE SCIENCE AND TECHNOLOGY TECHNICAL PAPERS
2094
Tadeusz Hepel, Fred H. Pollak and William E. O'Grady
Linear potential scan and cyclic voltammetric behavior of the single‐crystal
(110), (001), (111), (101), and (100) surfaces in
solution have been studied. Significant differences in electrochemical characteristics observed in the hydrogen adsorption/desorption region have been correlated with the differences in composition and structure of the ideal, model surfaces of the
single crystals. A cathodic/anodic pair of peaks H2C, H2A observed at about −0.3V (SCE) for the
faces (110), (001), (111), and (101) has been ascribed to the reversible hydrogen adsorption/desorption on ruthenium sites. Another pair of peaks H1C and H1A at about
, which appeared only on surfaces where oxygen is present, i.e., faces (110) and (001) has been attributed to the hydrogen chemisorption on oxygen sites. The adsorption Temkin coefficients g have been estimated. The correlation between the chemisorption peak currents and the surface density of the ruthenium sites is presented and discussed in detail. An interesting kinetic effect has been observed for the (100)
surface. The peak structure for
(100) cannot be correlated with the properties of the ideal surface, probably because of the surface restructuring effects. The best electrocatalytical properties have been found for the (101)
surface, good ones have been found for the (111) face, and poor for (110) and (001) faces.
2101
Donald Tuomi
2105
T. Serikawa and T. Yachi
2110
T. Y. Chiu, W. G. Oldham and C. Hovland
This paper reports on silicon nitride formation by low energy implantation of nitrogen or ammonia into silicon. Extensive material investigation on nitrogen‐implanted films using various analytical methods, including ellipsometry, chemical etching, transmission electron microscopy (TEM), x‐ray photoelectron microscopy (XPS), infrared transmission spectroscopy (IR), and Rutherford backscattering spectroscopy (RBS) is discussed. A new technique to derive the film thickness, density, refractive index, and dielectric constant is developed. This method employs a combination of ellipsometry, capacitance measurement, and nitrogen areal density obtained by RBS. A major finding indicates that the implanted nitride films have a low density compared to CVD nitride. Other material properties are also summarized.
2115
F. D. Auret
In and Sb surfaces of (111)
crystals were analyzed by Auger electron spectroscopy (AES) before, during, and after heating them in an ultrahigh vacuum system. Heating the samples to 450°C resulted in stoichiometric and oxygen‐free surfaces. Sulfur due to chemical precleaning is removed at 470°C. Further, if the initial carbon concentration is low enough (< 10% surface coverage), then it can be almost totally removed by thermal cleaning at 450°C.
2118
Mao‐Min Chen and Young H. Lee
2124
A. G. Anastopoulos, P. Nikitas and D. A. Jannakoudakis
The differential capacity characteristics of the MOS electrode with very thin (< 0.4 μm) semiconductor substrate are studied under high measurement frequencies. Model equations for the electric field, the differential space‐charge capacitance, and the gate voltage are derived and numerically solved. The capacitance‐voltage characteristics show that the formation of the depletion layer is limited by the thickness of the substrate. The absence of the contribution of minority carriers reveals the potential region corresponding to the formation of the depletion layer. The inversion and the depletion layers are found to coexist for a range of gate voltage values. Conclusions are drawn relative to the doping level, the oxide, and the substrate thickness for practical applications of the MOS electrode in electrochemical systems.
2128
S. Pizzini and C. Calligarich
The electrical and photovoltaic properties of partially compensated p‐type silicon samples have been investigated in order to understand the influence of the contemporaneous presence of donors and acceptors on the behavior of majority and minority carriers. It has been shown that the majority carrier properties are only slightly influenced by the presence of donors in p‐type samples and that the minority carrier properties depend on the excess acceptor concentration up to an excess donor concentration close to
. A theoretical explanation of these features has been proposed, on the base of the Shockley‐Read‐Hall model of recombination at shallow traps and donor‐acceptor pairs formation.
2133
L. C. Hsia
Optical properties of thin
films sputtered on glass for photomask making are investigated using Auger spectroscopy, ellipsometry, and reflectometry techniques. The films selected for the study vary from very rich to very poor in oxygen. The complex indexes of refraction are derived from the ellipsometry data using metal film calculation. The reflectance is then calculated to compare with that directly measured. These comparisons are important in understanding the film properties and their application in microlithography. The optical properties are found to be closely related to the oxygen concentration and its profile in the film. Optical intensity profiles in the photoresist are calculated for various
systems, yielding optimal conditions for minimizing resist line‐width variations. An experiment is also carried out to illustrate the main points predicted by the theory.
2138
M. M. Abu‐Zeid
Corner undercutting of mesa structures anisotropically etched in (100) silicon using ethylene diamine‐water solution at 85°C is shown to be gradual with the prominent beveling facets on the {212} planes and ending with small ledges on {323} planes. Considering the undercutting to be a beveling on the {212} planes, relations are derived to calculate corner compensation masks of different shapes. It is further shown that when the mask edge is tilted with respect to the wafer flat, the etched mesa sidewall is formed by a striated sidewall plane running parallel to the mask edge and intersecting the corner beveling planes unsymmetrically. The conditions to obtain straight sidewall traces on the (100) surface at a certain etching height are given.
2143
Anjan Bhattacharyya and Kenneth N. Ritz
We have used the technique of multiple ion implantations of Ar40 in polycrystalline silicon films for amorphization and subsequent thermal annealing for recrystallization. We observe dendritic grain growth with grain sizes (≃ 0.75 μm) about ten times larger than in original polycrystalline silicon films. This ion implantation technique can be used to form a device quality polysilicon film with large grains on an amorphous substrate.
2146
John Yuan‐tai Chen, Richard C. Henderson, James T. Hall and John W. Peters
This paper reviews the technique of photochemical‐assisted vapor deposition (photo‐CVD), and its applications in silicon IC processing. The photo‐CVD process deposits
films (PHOTOX™) at temperatures as low as 50°C. The deposition process, the resulting film properties, and the use of PHOTOX
for lateral isolation among transistors and vertical isolation between two‐level interconnects are discussed. A novel process employing PHOTOX deposition in conjunction with a photoresist liftoff can be used to achieve totally isoplanar isolation. Photo‐CVD can also be extended to produce other dielectrics such as silicon nitride and aluminum oxide.
2152
N. Chan Tung
2157
L. A. Zabdyr
2161
Donald R. Olander
Partitioning of the heat of combustion during Zircaloy oxidation between the gas‐oxide and oxide‐metal interfaces was determined. The spatial distribution of the heat release is very sensitive to the poorly known partial molar enthalpy of oxygen dissolution in
. This uncertainty is of minor consequence in the thermal analysis, however, because temperature gradients in the specimen due to the heat released by oxidation are very small. The temperature is mainly a function only of time. A simple lumped‐capacity thermal analysis suffices to describe the temperature transient initiated by the corrosion process. A method of coupling the temperature rise due to the heat release to the corrosion kinetics was developed.
2169
F. A. Schmidt, M. S. Beck, D. K. Rehbein, R. J. Conzemius and O. N. Carlson
The electric mobilities, diffusivities, and effective valences were determined for molybdenum, rhenium, tungsten, and zirconium in β‐thorium. All four solutes migrated in the same direction as the electron flow. Rhenium and molybdenum were found to be very mobile, with tungsten somewhat slower. Zirconium was found to move at a rate near that of the self‐diffusion of β‐thorium, viz., about 10−11 m2/s at 1500°C. The electromigration velocities showed a similar trend. A comparison was made between experimental data obtained by scanning laser mass spectrometry and theoretical transport equations for two purification experiments. Good agreement was obtained with both the concentration profile predicted by DeGroot and the purification ratio predicted by Verhoeven.
2175
R. A. Levy, M. L. Green and P. K. Gallagher
Aluminum and aluminum alloys are widely used for metallizing devices in VLSI processing. Such films can be deposited by a variety of techniques, which all presently suffer from inadequate step coverage. In this paper, we discuss the properties of aluminum films deposited by a low pressure chemical vapor deposition process using tri‐isobutyl aluminum as a source. Results of this work demonstrate that this process provides conformal step coverage, introduces no surface states, and promises to yield high wafer throughput. Films deposited on oxidized silicon monitors exhibit excellent properties in terms of chemical purity, adhesion, and electrical resistivity. Films deposited on device wafers prove to be compatible with current VLSI processing in terms of patterning, dry etching, and bondability and appear to have no effect on overall device performance. However, drawbacks of LPCVD aluminum appear to be in its structure‐related properties: namely, electromigration resistance and Al‐Si interdiffusion. These problems and potential solutions are addressed.
2182
T. L. Chu, Shirley S. Chu, S. C. Lin and J. Yue
Large grain thin films of copper indium diselenide with a preferred {112} orientation have been prepared by (i) the deposition of nearly stoichiometric films of copper and indium on suitable substrates using vacuum evaporation or electrodeposition, and (ii) the heat‐treatment of Cu‐In films in a hydrogen‐selenium atmosphere at temperatures above 630°C. The compositional, structural, and electrical properties of the films have been evaluated. In an alternate approach, a copper film on a substrate was first converted into cuprous selenide, followed by the deposition of indium and selenization. The resulting
films have the same properties as those from the selenization of Cu‐In films.
2185
M. A. Butler
A device is described for producing video images from localized photocurrent measurements on electrode surfaces. Images generated from photoinduced electron‐hole pair currents in passivating oxide layers on polycrystalline titanium and high resistance polycrystalline
photoelectrodes are shown as examples. The applicability of this device for producing images from other optically induced effects is also discussed. It is proposed that the localized heating from a focused laser beam can be used to image the current distribution on metal electrodes.
TECHNICAL NOTES
2190
Keiji Kobayashi
2191
T. T. Huang, Y. C. Lin, D. A. Shores and E. Pfender
ACCELERATED BRIEF COMMUNICATIONS
2197
K. M. Abraham, J. S. Foos and J. L. Goldman
2200
Warren W. Flack, James S. Papanu, Dennis W. Hess, David S. Soong and Alexis T. Bell
2202
S. Shanfield and S. Bay
2204
N. Müller, M. Abramovich, F. Decker, F. Iikawa and P. Motisuke
2206
S. Hettiarachchi and D. D. Macdonald
2208
M. C. Wintersgill, J. J. Fontanella, J. P. Calame, S. G. Greenbaum and C. G. Andeen