Abstract
films are deposited from
targets by RF planar magnetron sputtering in hydrogen‐argon mixtures. Properties of the
films are measured and compared with
films deposited in only an argon mixture and thermally grown
films. The following points are clarified by our experiments. The addition of hydrogen to the sputtering gas prevents the formation of film structures having microvoids, which appear when only argon is used. This results in film densification and a smooth surface texture. The addition of hydrogen greatly improves film property uniformities over the substrate. Infrared absorption spectra and Auger electron spectra show that the
films sputtered in hydrogen‐argon mixtures are indistinguishable in composition from the films by other methods.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
