Abstract
The reactive etching mechanism of Nb and
in
RF plasma has been studied in a flexible diode reactor, with special emphasis on a thin film heating effect. Etch rates of both materials during reactive ion etching are determined by a combination of the ion bombardment enhanced etching mechanism and the chemical etching mechanism. In niobium, the chemical etching always dominates over the ion enhanced etching. Etch rates in the plasma etching mode are primarily due to the chemical etching mechanism. The activation energy in the chemical etching is estimated to be 0.22 and 0.11 eV for Nb and
, respectively. The Nb chemical reactivity (etch rate divided by a number density of the fluorine atoms) shows a substantial increase proportional to RF power and, surprisingly, to Nb film thickness. The thicker the film, the higher the etching rate observed during plasma etching. We argue that this is due to a temperature rise in a Nb film caused by the eddy current generated by the RF magnetic field (i.e., the RF inductive heating).
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
