Batteries, Fuel Cells, and Energy Conversion
A183
Timothy W. Patterson and Robert M. Darling
This paper examines damage to the cathode catalyst layer of a polymer electrolyte membrane (PEM) fuel cell caused by restriction of hydrogen access to a portion of the anode catalyst layer. The results show severe damage to the majority of the cathode catalyst behind the obstruction after
of operation. A portion of the cathode catalyst layer near the outside edge of the obstruction remains undamaged.
A186
Kyung Yoon Chung, Jong Hee Kim and Kwang-Bum Kim
A190
J. Barker, R. K.B. Gover, P. Burns and A. J. Bryan
A193
Meng-Fang Hsu, Lin-Jung Wu, Jenn-Ming Wu, Yaw-Haw Shiu and Kin-Fu Lin
Single-element all-perovskite solid oxide fuel cells (SOFCs) incorporating
(LSGM) electrolyte,
(LSGMn) anode, and
(LSC) cathode were fabricated by a combination of dry pressing and screen printing. Deleterious effects due to interfacial reactions between electrolytes and anodes or cathodes were not found. Furthermore, an increase of SOFC conductivity was observed due to interdiffusion between electrolytes and electrodes. The maximum power density of the single-element all-perovskite SOFC cell was determined to be 250 and
, respectively, at 700 and
under test conditions with
at the anode side and
at the cathode.
A196
Xiaoxi Zuo, Mengqing Xu, Weishan Li, Dagen Su and Jiansheng Liu
The reduction of 1,3-propane sultone (PS) on graphite and the performance of Li-ion batteries with PS as an additive in the electrolyte were studied by cyclic voltammetry, energy dispersive spectroscopy, quantum chemical calculation, and battery discharge experiments. The reduction of PS on graphite takes place at the potential 0.2 V more positive than that of other compositions of electrolytes, resulting in the formation of a stable solid electrolyte interphase film on graphite. With the application of PS in the electrolyte of
battery, the discharge capacity of the battery is significantly improved even after the battery is stored at
or at 80°.
A200
Junichi Shirakawa, Masanobu Nakayama, Yoshiharu Uchimoto and Masataka Wakihara
The cobalt metal particles produced during lithium insertion into spinel,
, have been investigated by Co K-edge X-ray absorption spectroscopy (XAS) from the viewpoint of local and electronic structures around the Co atom. After electrochemical lithiation up to 0.01 V, extended X-ray absorption spectroscopy analysis showed an increasing Debye-Waller factor for the first neighbor interaction and disappearance of the second one. The simulated XAS by multiple scattering theory indicated that nanometer scale cobalt metal particles were produced with electrochemical reaction. It is suggested that the formation of nanometer scale cobalt particles leads to the high-rate performance of
as the battery anode.
A203
Yasuhiko Takahashi, Hideo Sasaoka, Ryuichi Kuzuo, Norihito Kijima and Junji Akimoto
A207
Y. H. Lee, I. C. Leu, C. L. Liao, S. T. Chang, M. T. Wu, J. H. Yen and K. Z. Fung
A211
S. J. Geng, J. H. Zhu and Z. G. Lu
A215
Zhimin Zhong
Electrochemical/Chemical Deposition and Etching
C65
Ui-hyoung Lee, Hyo-Jong Lee, Hun-Joon Sohn and Tak Kang
The effect of an accelerator on the morphological evolution during copper electrodeposition was investigated with the designed one-directional (1-D) pattern which has a seed layer only at the bottom of the pattern. Field-emission scanning electron microscope images showed that there was no superfilling found in the pattern with
width trench and no reduction in the surface area during electroplating. This indicates that superfilling in a damascene pattern results from the accumulation of the accelerator. It was found that copper damascene electroplating for ultralarge-scale integration is a simple electroplating system that is controlled by the activation overpotential of adhered organic additives, not by the concentration overpotential of copper ions.
C69
Takuma Katase, Ryoichi Kurosaki, Kuniaki Murase, Tetsuji Hirato and Yasuhiro Awakura
C73
Shou-Yi Chang, Ting-Kui Chang and Yu-Shuien Lee
The deformation behavior of electrolessly deposited nanocrystalline copper films with an ultrafine grain size of about
has been investigated in this study by using instrumented nanoindentation. The hardness, shear stress for plastic yielding, and energy release rate of the electroless copper films were obviously lower than those of electroplated copper films with a larger grain size due to the dominant deformation mechanism of grain-boundary sliding and grain rotation instead of dislocation activity. Voiding at grain boundaries and triple grain junctions was observed in the indented region as a consequence of grain boundary sliding and grain rotation.
C77
Bülent M. Başol and Alan C. West
Electrochemical mechanical deposition of copper on a patterned wafer surface involves sweeping the surface with a pad during deposition and yields a planarized copper layer. In this work, the mechanism of this planarization phenomenon was studied by electroplating copper films on blanket wafer surfaces while sweeping a portion of the wafer surface with a small pad. Suppression of current density within the swept region was observed in the case when both organic suppressor and accelerator additives were present in the plating electrolyte. The degree of suppression in the deposition current density was found to be a strong function of the wafer rotation speed. Experimental and modeling results agreed well with the mechanically induced super filling mechanism which suggests that the difference between the current densities at the swept and unswept regions on the wafer surface is due to an additive surface coverage differential created by the sweeping action of the pad.
Electrochemical Synthesis and Engineering
D9
C. T. Hsu and S. K. Yen
Dielectric Science and Materials
F17
Q. T. Le, V. Jeannot, M. R. Baklanov, R. Vanderheyden, W. Boullart and S. Vanhaelemeersch
Semiconductor Devices, Materials, and Processing
G111
P. Zhao, I. Trachtenberg, M. J. Kim, B. E. Gnade and R. M. Wallace
G114
L. H. Wong, J. P. Liu, C. C. Wong, C. Ferraris, T. J. White, L. Chan, D. K. Sohn and L. C. Hsia
G117
Jen Hao Lee, Pang Lin, Jia Chong Ho and Cheng Chung Lee
G121
Dongkyu Lee, Sungho Heo, Changhee Cho, G. H. Buh, Tai-su Park, Jongryeol Yoo, Yugyun Shin and Hyunsang Hwang
We have investigated ultrashallow
junctions formed by
plasma doping. Conventional one-step annealing processes such as rapid thermal annealing or excimer laser annealing (ELA) are not effective methods for high activation of boron. Furthermore, it is known that fluorine can retard dopant activation. In order to reduce fluorine concentration, we propose additional preannealing at 600°C for 10 min followed by ELA. This process dramatically improved the boron activation ratio, while maintaining the same junction depth. The improvement of dopant activation is attributed to significant out-diffusion of fluorine which in turn enhances activation of boron during ELA.
G124
Po-Tsun Liu, C. T. Tsai, T. C. Chang, K. T. Kin, P. L. Chang, C. M. Chen and H. F. Cheng
This paper explores the application of supercritical carbon dioxide fluids on the field emission enhancement for vertically aligned carbon nanotubes. The typical heating process cannot effectively activate the deionized-water-rinsed carbon nanotube emitters, exhibiting poorer field emission performance, due to residual moisture uptake in the carbon nanotubes. In contrast, the field emission enhancement can be achieved significantly by applying the supercritical carbon dioxide fluids associated with 3 to 9 vol % propyl alcohol. It is found the cosolvent propyl alcohol plays a critical role in the activation efficiency of supercritical carbon dioxide fluids. A physical model is also deduced to clarify the observation.
G127
M. Shahriar Rahman, Hokyung Park, Man Chang, Dongsoo Lee, Byoung Hun Lee and Hyunsang Hwang
G130
Shih-Chieh Chang and Ying-Lang Wang
G133
Min Zou, Li Cai and Sean Paul Dorey
This paper reports on an improved understanding for fabricating silicon nanowires (SiNWs) by rapid aluminum-induced crystallization (AIC) of plasma-enhanced chemical vapor deposited amorphous silicon (a-Si:H). The study indicates that during an AIC of a-Si:H process, Si nanograins were randomly created, self-assembled in preferred directions, and then interfused with adjacent nanograins to form silicon nanowires. This is quite different from the mechanisms that govern the growth of SiNWs by traditional vapor-liquid-solid and solid-liquid-solid methods.
G136
Sungho Heo, Sungkweon Baek, Dongkyu Lee, Musarrat Hasan, Hyungsuk Jung, Jongho Lee and Hyunsang Hwang
G138
Chia-Yu Lu, Horng-Chih Lin and Tiao-Yuan Huang
Dynamic negative bias temperature instability (DNBTI) characteristics of p-metal oxide semiconductor field-effect transistors (p-MOSFETs) with compressive channel strain induced by a SiN-capping layer were investigated. Although the SiN-capping is effective in boosting the device drive current, it may concomitantly worsen DNBTI characteristics. This is ascribed to higher hydrogen content incorporated during SiN deposition as well as higher strain energy stored in the channel. A strong dependence on the ac stress frequency is also observed for the SiN-capped devices, which is ascribed to excess hydrogen species contained in the strained devices. Finally, our experimental results also suggest that the aggravated NBTI in the strained devices could be alleviated by high frequency operation.
G141
Jacob W. Smith, Yuji Maeda and R. Suryanarayanan Iyer
G144
William B. Ingler Jr. and Shahed U.M. Khan
G147
Jeong Ho Cho, Wi Hyoung Lee, Yeong Don Park, Woong-Kwon Kim, Soo Young Kim, Jong-Lam Lee and Kilwon Cho
With the aim of enhancing electron injection in organic electronic devices, a self-assembled monolayer (SAM) that reacts with both cathode and polymer insulating nanolayers was used. The turn-on voltage of the device decreased from
by inserting a methoxy-terminated SAM between the cathode and polymer insulating nanolayer. Synchrotron radiation photoelectron spectroscopy results showed that inserting the SAM and polymer insulating nanolayer caused the work function to decrease by about
. This reduction lowers the electron injection barrier, and produces a decrease in turn-on voltage of the device.
G150
A. P. Vajpeyi, S. Tripathy, S. R. Shannigrahi, B. C. Foo, L. S. Wang, S. J. Chua and E. Alves
Sensors and Displays: Principles, Materials, and Processing
H19
Yuhua Wang and Hui Gao
H22
Kyota Uheda, Naoto Hirosaki, Yoshinobu Yamamoto, Atsushi Naito, Takuya Nakajima and Hajime Yamamoto
H26
Yu Hua Wang, Jia Chi Zhang and Xuan Guo
General Topics
J13
Tomohiro Shimizu, Mamoru Nagayanagi, Tomoyuki Ishida, Osami Sakata, Takeo Oku, Hiroyuki Sakaue, Takayuki Takahagi and Shoso Shingubara
We established a method to clean the Si surface that exists at the bottom of anodic aluminum oxide (AAO) nanoholes after removal of the amorphous barrier layer, and we succeeded in the preparation of epitaxial Cu dot arrays on the Si surface in the nanoholes. The Si surfaces at the AAO nanohole bottoms were cleaned with dilute hydrofluoric acid after annealing at
in Ar ambient, and we sputtered Cu on the AAO template to form Cu dot arrays. This method for preparing nanohole arrays on a single crystalline substrate enables growth of a variety of highly regular epitaxial nanodot/wire arrays.