A novel method of electrochemical synthesis of yttrium aluminum garnet (YAG) thin–film coating on IN617 has been successfully developed in the mixture of Equation or symbol description not availableY(NO3)3 and Equation or symbol description not availableAl(NO3)3 aqueous solution. The coating films were further annealed and characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The coating film was composed of hydrated Equation or symbol description not availableY(OH)3 and Equation or symbol description not availableAl(OH)3, the physically adsorbed water evaporated between 25 and 103°C, dehydrated into Equation or symbol description not availableY(OH)3 and Equation or symbol description not availableAl(OH)3 between 103 and 400°C, condensed into YOOH and AlOOH between 400 and 890°C, and finally transformed into single–phase YAG Equation or symbol description not available(Y3Al5O12) between 890 and 1000°C. The YAG coating film with a thickness about Equation or symbol description not available2μm revealed the uniform and adherent interface on the substrate.