Abstract
Single-element all-perovskite solid oxide fuel cells (SOFCs) incorporating
(LSGM) electrolyte,
(LSGMn) anode, and
(LSC) cathode were fabricated by a combination of dry pressing and screen printing. Deleterious effects due to interfacial reactions between electrolytes and anodes or cathodes were not found. Furthermore, an increase of SOFC conductivity was observed due to interdiffusion between electrolytes and electrodes. The maximum power density of the single-element all-perovskite SOFC cell was determined to be 250 and
, respectively, at 700 and
under test conditions with
at the anode side and
at the cathode.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
