Technical Note
121501
The following article is Open access
Vineet Kumar, Niklas V Lausti, Jiří Hajnyš, Ivan Hudák, David Motyčka, Adam Jelínek and Michal Hejduk
We demonstrate the ultra-high vacuum compatibility of a microwave-driven electron trap and an atomic oven (for atomic beam generation) fabricated through 3D printing via Laser Powder Bed Fusion (L-PBF). The trap integrates into a coaxial microwave cavity, enabling stable, narrow-band, high-amplitude oscillations of the electric field at the electrodes. The design also supports simultaneous trapping of ions. The oven performs well in ultra-high vacuum (UHV) environments without significant outgassing. In addition to achieving the UHV regime for 3D-printed components, pressure variations and their potential impact on electron-ion trapping experiments were investigated over a month. Our results show that experiments with electrons photodetached from trapped and laser-cooled ions are feasible with the trap and oven manufactured by the L-PBF method. These findings establish a foundation for future experiments in microwave detection and the study of low-energy ion-electron interactions at room temperature.
Topical Reviews
122001
Muhaj Talib Abdullah and Mazin Sherzad Othman
Metal oxide nanoparticles display unique properties such as a large bandgap, low electric constant, low refractive index, high chemical stability, and the presence of vacant oxygen. Magnesium oxide (MgO) nanoparticles are of particular interest because they are abundant, nontoxic, inexpensive, odorless, and stable. MgO possesses antibacterial properties in medicine due to the production of superoxide anion (O2−). The reactivity and stability of MgO are relevant for applications in medicine, water purification, catalysis, and gas sensors. For membrane applications, new strategies are needed to control the pore diameter of membranes with MgO as a filler. In food packaging, methods are required to assess the release of nanoparticles from packaging materials into food. For sensor applications, challenges include sensitivity, reproducibility, surface fouling, and poisoning. In supercapacitors and semiconductors, controlling the pore structure should enhance electron transport. Additionally, depending on their size and form, MgO nanostructures have shown potential for various applications. In particular, researchers have created nanoparticles, thin films, nanotubes, nano walls, and nanobelts. While a wide range of synthesis methodologies exists for well-known nanostructures such as thin films and nanoparticles, there is a lack of methodology for other types of nanostructures. Understanding these techniques is crucial for growing these nanostructures optimally. Consequently, this review paper provides an overview of several methods for designing distinct types of nanostructures. It also demonstrates that the preparation method significantly influences the efficacy of the MgO structures.
122002
Fatima Gogo Mayaki, Abdulsalami Sanni Kovo, Abdulrazak Jinadu Otaru, Oluwatosin Kudirat Shittu and Umar Ndagi
Nanozeolites are essential materials in the healthcare industry due to their distinctive properties. These eco-friendly substances feature a high surface area, excellent ion-exchange capabilities, making them ideal for various medical devices and pharmaceutical applications. nanozeolites enable drug loading through physical adsorption within pores, surface interactions and electrostatic ion exchange, which collectively affect their sustained and controlled release profiles, enhancing drug efficacy while reducing side effects. Numerous studies have demonstrated the effectiveness of nano-zeolite in treating conditions such as cancer and infections by facilitating targeted delivery and improved bioavailability. Furthermore, nanozeolites play a role in the development of sustainable green technologies, enhancing applications in energy production, agriculture, waste management, and environmental remediation. Challenges such as scalability, potential toxicity, and the need for advanced surface functionalization remain critical to address. Future research directions include elucidating precise drug–carrier interaction mechanisms with molecular simulations, optimizing synthesis methods for controlled morphology and functionalization, improving biocompatibility through tailored surface modifications, and expanding clinical translation. As the demand for eco-friendly and efficient healthcare materials increases, the importance of nanozeolites becomes more evident. This review explores their applications in healthcare, emphasizing drug delivery systems, antimicrobial uses, biosensors, and wound healing, while highlighting mechanistic pathways and developmental perspectives to accelerate their biomedical implementation.
122003
A A McAsule and M M Halim
Zinc oxide nanorods (ZNRs) are widely studied for applications in photocatalysis, solar cells, UV photodetectors, sensors, light-emitting diodes (LEDs), and random lasers. The quality of ZNRs is strongly influenced by the underlying seed layer, which affects their structural, morphological, and optical properties. Among various synthesis techniques, the sol-gel spin coating method offers a cost-effective and efficient approach for producing a ZnO seed layer (ZSL), enabling controlled solvent evaporation and film formation. Optimizing the coating solution is crucial for achieving uniformity, considering chemical reactivity and surface tension factors. This mini-review explores the important role of the spin-coating technique in ZSL fabrication and its impact on synthesizing high-quality ZNRs. It provides an overview of ZnO nanostructures, details the seed layer preparation process, explains the physics of spin coating, discusses key factors affecting seed layer quality via spin coating, limiting its industrial adoption, and concludes with insights on advancements in ZSL growth for optimal ZNR quality.
Papers
General and interdisciplinary, including biophysics, geophysics and astrophysics
125001
Xuegong Huang, Zijun Guo and Yutong Zhai
Manual carrying tasks subject the spine to high external loads, resulting in excessive joint torques and an increased risk of injury. Wearable exoskeletons provide an effective way to solve this problem. However, most existing exoskeletons are designed with rigid linkages, which restricts the natural movement of the human body. Based on the unique anatomical structure of the human spine and dynamic bending mechanisms, this study proposes a novel multi-jointed passive bionic spinal exoskeleton characterized by a five-segment serial elastic unit structure. This design significantly enhances compliance and flexibility in sagittal, coronal, and transverse plane movements, enabling the exoskeleton to better match the natural activities of the human spine. First, we performed a biomechanical simulation of the carrying maneuvers using OpenSim to obtain data on the flexion angles of the major joints. Second, we conducted the structural design of the bionic spine, determined the stiffness of its elastic elements using the static method, and derived its kinematic model using the D-H coordinate analysis method. Concurrently, a human-machine coupled model was established for dynamic analysis. Finally, OpenSim was used to derive the muscle power change curves for a comparative verification of the exoskeleton’s good assisting effect.
125002
Nikta Vosoughian and Ali Mohammadi
The current study showed a high metal tolerance of a novel Bacillus subtilis NH1-8 and its potential for Zinc oxide nanoparticles (ZnO NPs) synthesis. ZnO NPs were rapidly biosynthesize using and eco-friendly methods with a novel bacterium isolated from Howz Soltan Salt Lake (Qom, IRAN). The effects of different synthesis methods and process parameters on particle yield were studied. As the best precursor salt, ZnSO4.H2O (0.1M) with a reaction time of 48 h, agitation rate of 150 rpm, physiological pH of 7.0, and optimal temperature of 30 °C resulted in the synthesis of ZnO NPs with maximum yield. After optimization of growth conditions, ZnO NPs were studied using different techniques, including UV–vis, FTIR, XRD, TEM, EDX, DLS, and zeta potential. The synthesized particles were quasi-spherical in shape with an average size of 39 nm were observed in the TEM micrographs. The antifungal, antibacterial, and anti-biofilm activities of biosynthesized ZnO NPs were studied. The mechanism of antibacterial activity was evaluated on the basis of the leakage of nucleic acid from the cells and measuring protein. This study can be extended to develop a scalable and controlled process for the bacteriosynthesis of nanoparticles that can be used for diverse applications in industries.
125003
Nirosha R, R Kangeyan and M Kavitha
This study investigates a novel Organic Thin-Film Transistor(OTFT) structure designed for transparent and flexible displays, where Carbon Nanotubes (CNTs) function as electrodes, and DNTT (diphenyl-dinaphtho-thieno-thiophene) serves as an organic semiconductor. In OTFTs, efficient charge carrier injection from the electrodes into the semiconductor active layer is crucial. The proposed device structure aims to enhance the charge carrier mobility while simultaneously addressing contact resistance issues across different contact layouts. The present research emphasizes this hybrid material system’s potential for developing high-performance, transparent, and flexible organic transistors, which are suitable for next-generation displays and wearable electronics.
125004
Zikang Yang, Chunfa Zhao, Xiaofang Ning, Yang Feng, Kai Li, Jing Yang and Dicheng Li
To reduce the inherent pitching moment of the bogie in superconducting electrodynamic suspension (EDS) trains and enhance operational stability, an electromagnetic calculation model of the EDS system is developed based on the magnetic vector potential method. This model enables the dynamic coupling analysis of induced magnetic fields, induced currents, and three-dimensional electromagnetic forces. Using the proposed model, the asymmetry in the induced current and vertical electromagnetic force distribution of the null-flux coils (NFCs) is investigated, revealing that the bogie pitching moment arises from the combined effects of the circuit time constant of the NFCs and the waveform of the induced voltage. Building on this mechanism, a structural optimization method is introduced, in which the deflection angle of each superconducting coil (SC) about its local y-axis is adopted as the design parameter. SC1 is deflected by 0.0355 rad, SC2 by 0.04 rad, and SC3 and SC4 are rotated symmetrically with SC2 and SC1, respectively. The optimal combination of deflection angles minimizes both the mean pitching moment and its fluctuation. Simulation results demonstrate that, for a single bogie operating at medium to high speeds, the average pitch angle is reduced by more than 80% compared with the unoptimized case. For a three-car trainset, the maximum pitching amplitude—occurring at the third bogie—is reduced by more than 20% after optimization, while the amplitude of the dominant frequency of its pitch acceleration has decreased by more than 65%. These improvements significantly enhance the safety margin of EDS train operation.
125005
Dominique L Ramos, Wesley Spalenza, Gustavo A Verneck and Jaziel G Coelho
In this work, we investigate the impact of nonlinear Born-Infeld (BI) electrodynamics on the internal structure and macroscopic properties of cold and magnetized neutron stars (NSs). By incorporating the Born-Infeld field into a relativistic quantum hadrodynamics framework (QHD-II), we derive modified equations of state (EoS) and analyze their influence through the Tolman–Oppenheimer–Volkoff (TOV) equations. We utilize the GM1 and GM3 parameterizations to explore different hardness regimes of nuclear matter under strong magnetic fields. Our results are compared with observational data from massive pulsars like PSR J0740 + 6620 and the compact object HESS J1731 − 347, providing constraints on the BI parameter β. We find that for the Born-Infeld parameter β < 1020 G, nonlinear effects soften the EoS, reducing the maximum NS masses by up to 10% compared to Maxwellian predictions. For β ≫ 1020 G, BI electrodynamics converges to the classical limit, with GM1 (stiff EoS) supporting
and GM3 (soft EoS) yielding
. These results constrain BI modifications in magnetars with B ≳ 1015 G. Our astrophysical constraints on the parameter β, particularly the stability threshold β ≳ 1020 G for B ∼ 1015 G, provide a valuable link to fundamental physics, potentially informing models of nonlinear QED and effective string theories where such a parameter naturally emerges.
125006
Anand Pawar and Kamal Raj Pardasani
The neuron cell generates a nonhomogeneous environment composed of microstructures with varying influxes and outfluxes at different sites. However, there were no documented efforts to examine neuronal calcium (Ca2+) signaling pathway with nonhomogeneous buffering mechanisms and influences of localized influxes and outfluxes in three-dimensional contexts. Therefore, a three-dimensional framework has been proposed to examine neuronal Ca2+ signaling system regulating β-amyloid (Aβ) production and adenosine triphosphate (ATP) release. We considered that the properties of cellular mechanisms are non-uniform along x, y, and z axes. The present model incorporates several types of buffers, namely EGTA, S100B, Calbindin-D28K, Calmodulin, and several crucial mechanisms like Sarcoendoplasmic Reticulum Calcium ATPase (SERCA) pump, IP3-receptor (IP3R), voltage-gated calcium channel (VGCC), ryanodine-receptor (RyR), sodium-calcium exchanger (NCX), etc. The present three-dimensional model is more realistic as it represents the source influx processes along different planes and surfaces of the cell. The Finite Element method (FEM), along with the Crank-Nicholson (CN) procedure, was used to acquire the numerical results. Neurotoxic events that may contribute to disease-related diseases like Ischemia, Alzheimer’s (AD), etc may stem from imbalances in Ca2+ levels, Aβ production, and ATP release due to different cellular processes in neurons.
125007
The following article is Open access
Nikos Irges, Antonis Kalogirou and Fotis Koutroulis
We argue that a scalar field in de Sitter spacetime should feel explicit thermal effects associated with its curvature. Starting from the Bunch-Davies vacuum and a scalar field with small mass compared to the de Sitter curvature, we use the thermo-field dynamics formalism in order to expose these thermal effects. We compute the thermal Wightman function connecting two spacetime points and from it, via the point-splitting regularization technique, the renormalized thermal energy-momentum tensor. We then examine how these corrections affect the de Sitter geometry by solving for the semi-classical backreaction and find that their sign depends on the initial conditions. In order to place our results in context, we compare them to the corresponding 2-loop quantum gravity correction to the cosmological constant derived in (Tsamis N C, Woodard R P 1996 Quantum gravity slows inflation Nucl. Phys. B474 235–248).
125008
Samarendra Samal, Rayabarapu Venkateswarlu, Ashish Kumar and Guru Prasad Mishra
An AlGaN/AlN/GaN MOSHEMT with a dual-cavity structure below the gate is designed for advanced biosensing applications. This work focuses on evaluating the device’s sensitivity and feasibility by analysing its responses to neutral and charged biomolecules across a broad detection range. Neutral biomolecules are modelled by assigning specific dielectric constants to the cavity regions, while charged biomolecules are represented through interface charge densities. An Al2O3 sensing membrane is employed for its excellent chemical stability and high surface hydroxyl density, enabling selective chemical functionalization. To enhance molecular recognition and overall device performance, the surface is functionalized with APTES. Device characteristics are analysed by monitoring the deviations in drain current, threshold voltage, channel conductance, and potential distribution. For neutral biomolecules, the device exhibits overall threshold voltage and drain current variations of 2.58 V and 125.2 mA mm−1, respectively. In contrast, charged biomolecules induce a larger threshold voltage shift of 4.39 V and a corresponding change in drain current of 458 mA mm−1 across the full range of charge densities. The average voltage and current sensitivities evaluated at 300 K are 12.82% and 21.29%, respectively, for neutral biomolecules, whereas for charged biomolecules, the corresponding values are 19.64% and 25.92%, respectively. Numerical simulations are performed using the ATLAS Silvaco tool, and a complementary analytical model for threshold voltage and drain current is developed in MATLAB to ensure accurate parameter evaluation. Furthermore, the device’s temperature dependent behaviour is investigated over 300 K to 320 K to assess its performance under realistic biomedical operating conditions.
125009
Wei Yin, Xiaoya Wang, Baiyi Li, Hui Wang, Wenbo Cheng and Fengrui Zhang
To investigate the durability of road soda residue lime soil (SRLS) under wet-dry cycling, a series of experiments were conducted to systematically assess the influence of factors such as soda-lime ratio, compaction degree, dry-wet cycles, and curing age on the strength and durability of SRLS. The study also aimed to explore the degradation mechanism of SRLS strength under wet-dry cycling by analyzing mass loss, soluble salt loss, and gel loss, along with microstructural tests.The experimental findings are summarized as follows: (1) As the soda-lime ratio increases, both the strength of SRLS and its strength loss rate (S) initially decrease and then increase. The strength loss rate (S) reaches its lowest of 6.74% when the soda-lime ratio is 50%. The strength loss rate increases progressively with higher compaction degree, longer curing age, and more dry-wet cycles; (2) SRLS specimens can endure up to three dry-wet cycles without undergoing disintegration. During the wet-dry cycling process, a positive correlation is observed between the strength loss rate (S) and both the cumulative mass loss rate (Ki) and the soluble salt loss (Yci); (3) Wet-dry cycling leads to the dissolution and migration of soluble salts within the solid phase of SRLS and the breakdown of C-S-H gelation bonds, which results in the loss of soluble salts and gelation substance. This weakening of the crystal-gel-soil particle composite structure reduces the cohesion and compactness of SRLS, causing soil particles to loosen and disintegrate due to the diminished bonding and filling effects. Consequently, the deterioration of SRLS strength leads to a decrease in its durability.
125010
Haopeng Jiang, Wei Yin and Fengrui Zhang
The presence of joints significantly reduces rock strength and self-stabilization capacity. The deformation and failure mechanisms of jointed rock are controlled by both structural features and joint orientation, leading to behavior distinct from that of homogeneous rock. Focusing on jointed slate from a tunnel in Jilin Province, this study conducted systematic laboratory tests including uniaxial and triaxial compression experiments to investigate the mechanical properties under varying joint dip angles. A key innovation of this research is the development of an improved ubiquitous joint model that accurately captures the transversely isotropic deformation behavior of jointed slate. Results demonstrate that the mechanical parameters—including elastic modulus, compressive strength, cohesion, and internal friction angle—exhibit strong anisotropy and a V-shaped trend as the joint angle increases from 0° to 90°. As the joint dip angle increases from 0° to 90°, the uniaxial compressive strength reaches its minimum at 45° (78.7 MPa), which is approximately 62% of the value at 0° (127.3 MPa). Similarly, the elastic modulus drops to its lowest value of 17.97 GPa at 45°. Validation analyses confirm that the proposed model effectively simulates both deformation and strength anisotropy, showing high consistency with experimental results and demonstrating its superior accuracy and practical applicability for engineering simulations.
125011
YangTao Yuan, JiaJia Mi and JianPing Shi
Rapid and user-friendly quantification of ascorbic acid (AA) is increasingly demanded for evaluating the nutritional value and freshness of fruits directly at the point of harvest or sale. However, current analytical strategies often rely on either sophisticated instrumentation (e.g., HPLC, MS) or nanozyme systems that require external triggers, added reagents, or suffer from limited stability in complex food matrices. Here we report a self-activated Ni-HHTP metal–organic framework nanozyme that uniquely harnesses dissolved oxygen under mild acidic conditions to generate reactive oxygen species (ROS), enabling direct peroxidase-like oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) without the need for H2O2 or light irradiation. The chromogenic reaction is selectively suppressed by AA through ROS scavenging, leading to a robust colorimetric readout with a detection window below 30 μM. The limit of detection (LOD) was 1.94 μM. Distinct from previous nanozyme platforms, the proposed system integrates seamlessly with smartphone-based RGB analysis, offering instrument-free, portable, and low-cost AA quantification. The method exhibits strong anti-interference performance against common reductants and was successfully validated in real fruit samples (orange, tomato, apple), demonstrating its practicality for on-site nutritional assessment. This work introduces a portable and consumer-oriented colorimetric strategy for antioxidant evaluation in food quality monitoring.
125012
Meng Yin, Zhiqiang Huang, Kai Fu, Yukun Chen and Jianning Zhang
To improve the efficiency of deep oil and gas resource extraction, a laser-assisted PDC bit rock-breaking drilling technology is proposed. The evolution of cutter loads and the rock-breaking mechanism under laser irradiation were investigated through experiments and numerical simulations. Experimental results show that under pulsed laser assistance, the average cutting force of the PDC cutter was reduced by 82.89% compared to drilling without laser assistance. Numerical simulation results indicate that pulsed laser irradiation induces localized vaporization and thermal stress damage in the rock, significantly weakening its strength. Compared with continuous laser assistance, pulsed laser conditions reduce the stress in the central cutting zone by 20%, the cutting force by 20.4%, the variance of the cutting force by 48.8%, and the specific energy for steady-state cutting by 19.8%. The research findings support the development and engineering application of laser–PDC bit integrated rock-breaking drilling technology.
125013
Wei Jiang, Xiangguo Zhai, Huigui Li, Wenwei Cheng, Julian Liu and Yuanlong Chen
To resolve the corrosion problems encountered by 304 steels, this study proposes a method combining liquid-phase assisted laser processing with jet electrodeposition, through which the samples were pre-treated by laser in different corrosive media, and then plated by Ni deposition via jet electrodeposition. An orthogonal experiment was conducted to optimize the process parameters of the liquid-phase-assisted laser combined with jet electrodeposition, including the liquid-phase medium, current density, laser scanning pitch, and laser power. The experimental results show that the influence of processing parameters on the surface quality of nickel Coating prepared by the combined process is affected by the liquid phase medium by the largest, then the current density at the second place, the laser scanning spacing at the third place, and the laser power the least. By optimizing the process parameters, a coating with a surface was obtained with a roughness as low as 1.183 μm, a grain size refined to 14.3 nm, a hardness as high as 485 HV, an impedance increased to 2.4 × 104 Ω cm2, and a bonding strength as high as 36.4 N.
125014
Lei Fang
With the rapid development of electric vehicles, the demand for high-power charging equipment continues to grow, resulting in increased heat generation. Traditional water-cooling systems can no longer meet the cooling requirements. To improve thermal performance and ensure equipment safety, this paper proposes a temperature prediction model based on a Convolutional Neural Network–Gated Recurrent Unit architecture, optimized using a Hunter–prey Optimization algorithm. Guided by the model and the heat generation characteristics of the equipment, the design of the electrode-type liquid level sensor and the thermal resistance temperature sensor is optimized. A temperature control strategy is also introduced. Experimental results demonstrate that the proposed new model exhibits superior convergence performance. With only 50 iterations, HPO-CGRU converged to the global minimum of −101. In terms of prediction accuracy, HPO-CGRU showed the best consistency with actual values, with an average absolute error between the prediction curve and actual values of only 0.15 °C-significantly lower than that of the comparison models. The proposed control strategy effectively regulates the temperature of the charging gun. These findings confirm that the optimized water-cooling system enables accurate temperature prediction and efficient thermal regulation, ensuring the safety of automotive charging equipment.
125015
Junhui Zhang, Bin Hu, Jingxin Mao, Jinpeng Wu and Zheng Kong
The long-term stability of bedded rock slopes is usually dominated by properties of weak interlayers, which are prone to creep deformation and the resulting instability failure. Acting as potential sliding surfaces, weak interlayers can be destabilized by a combination of increasing stress, temperature fluctuations, and intense rainfall, ultimately leading to landslides. To investigate the internal instability mechanism of these layers in slopes and shear creep behavior of carbonaceous shale, the shear failure of carbonaceous shale was conducted by using a specialized shear rheology test system. The three stages of shear creep deformation were examined. Subsequently, a shear creep damage model for weak interlayers was established based on the theories of fractal derivatives and damage mechanics. Experimental results indicate that the shear creep rate increases with the increase of shear stress, but shear creep deformation decreases with the increase of normal stress. The time to creep failure of the sample is prolonged under higher normal stress, while determined by the shear stress and normal stress. Validation through experimental results shows that the shear creep model curves accurately capture the behavior of the test data. The research results have guiding significance for predicting the shear creep behavior of carbonaceous shale and long-term stability of weak interlayers in slope.
125016
N Metwally, A R Mohammed and M Yassin
A model for a quantum battery in an accelerated frame is proposed. The battery comprises a two-qubit system initialized in its ground state and is charged via a dipolar interaction Hamiltonian. The acceleration process requires the system to be described from the perspective of two distinct spacetime regions. We investigate the influence of the initial spin orientation, the spin-spin coupling parameter, and the acceleration rate on the battery’s performance, specifically its stored energy, charging power, and extractable work. Our results demonstrate that the battery’s energy oscillates between lower and upper bounds, allowing it to be charged at any finite acceleration. All three physical quantities decrease in the first region and increase in the second region as the acceleration rate rises. Furthermore, the values of these quantities in the second region are consistently smaller than their counterparts in the first region. The largest upper and lower bounds of these quantities occur for spins oriented in the xy-plane, while the smallest bounds are observed for spins polarized along the z-axis.
125017
Xincheng Yin, Yuhang Zhou, Youliang Wang, Zikai Wang, Xin Wang and Yanjun Shen
To investigate the effects of key chemical mechanical polishing (CMP) parameters on the material removal rate (MRR) and surface roughness (Ra) of BK7 optical glass, single-factor experiments were conducted to examine the influence of polishing time, polishing disc rotational speed, CeO2 concentration and slurry pH. Using polyacrylic acid (PAA) and sodium hexametaphosphate (SHMP) as dispersants, MRR and Ra were evaluated under varying conditions, and EDS, XPS, and SEM analyses were performed to assess Ce3+ concentration on abrasive surfaces and CeO2 particle behavior. The optimal CMP parameters were identified as: polishing time 50 min, polishing disc rotation speed 60 r min−1, slurry pH = 6, citric acid 2.0 wt%, CeO2 0.5 wt%, and PAA 2.0 wt%. Under these conditions, the slurry exhibited a zeta potential absolute value of 19.77 mV, indicating excellent dispersibility, which resulted in an MRR of 140.34 μm h−1 and a final Ra of 1.2 nm, corresponding to a 99.7% reduction in surface roughness, with no abrasive residue observed on the polished surface. with no abrasive residue observed on the polished surface. The CMP mechanism for BK7 glass is proposed, PAA acts as a dispersant by ionizing in the polishing slurry to generate –COO− groups, which adsorb onto the CeO2 abrasive particles and improve dispersion stability via steric hindrance. Meanwhile, citric acid acts as a reducing agent, converting surface Ce4+ to Ce3+ on the CeO2 abrasives. The increased Ce3+ concentration promotes the formation of oxygen vacancies, thereby accelerating the reaction kinetics between CeO2 abrasives and the BK7 glass surface and significantly improving polishing efficiency.
125018
Tirtharaj Barman and Swarandeep Sahoo
This study examines the onset of rotating magnetoconvection under an axially imposed magnetic field in the presence of partial thermal stable stratification. Three stratification models—fully unstable, weakly stable, and strongly stable—are analyzed across Ekman numbers E = 10−3, 10−4, and 10−5 (rotation rates) and Roberts numbers q = 0.01, 1 and 10 (diffusivity ratios). Magnetic back-reaction is explored by varying the Elsasser number (Λ) from 0 to 10. Symmetry-breaking effects of stable layer are assessed via an asymmetry index. Additionally, local scaling laws are derived for onset parameters and convective penetration is quantified numerically. Results show that stable stratification promotes earlier onset and smaller-scale flows, with stronger effects in weak field regimes—hallmarks of penetrative convection. In weak magnetic fields, symmetry breaking is pronounced but weakens for strong field regime. Convective roll thickening peaks at Λ = 1, while columnarity persists in both weak and strong field regimes due to rotational constraints and elongation effects along imposed field direction, respectively. Magnetic stabilization is most effective at low to moderate values of q but weakens in high q regimes. Penetration depth is inversely related to the magnetic field strength and rotation rates, particularly under strong stratification, but varies non-monotonically with rotation in weakly stratified cases. In the non-magnetic limit, the critical Ekman number Ec, exhibiting maximum penetration effects, is obtained as Ec = 10−4 for weak stable stratification and Ec = 10−3 for strong stable stratification. Obtained results can provide insights into the complex interplay of various physical effects on planetary interiors.
125019
Zesheng Liu, Yan Liu, Xiyu Gu, Shengxiang Wang, Xiaoming Huang, Wei Min, Xin Tong, Yuanhang Qu, Haiyang Li, Yao Cai et al
Flowmeters are widely used across various industries to measure fluid flow rates. However, traditional designs face limitations related to wiring complexity and external power requirements, especially in harsh environments. Surface Acoustic Wave (SAW) technology offers a compelling alternative, enabling wireless sensing under such conditions. This study represents the theoretical and experiment evaluation of a cantilever-based SAW flowmeter. As the flow passes over the cantilever, the pressure across it induces bending which in turn causes a shift on the resonant frequency of the SAW. By monitoring this frequency shift under varying flow rates, flow rate calibration can be achieved. This frequency shift originates from the stress applied on SAW, which alters the boundary condition of constitutive piezoelectric equations, material properties, and the wavelength of SAW. A theoretical analysis of SAW frequency shift was performed using COMSOL and Material Studio, focusing on the combined effects of stress, material property variations, and wavelength change. Experimental validation shows that the cantilever-based SAW flowmeter exhibits an average frequency shift of 703.67 (Hz/(L/min)) for N2 gas.
125020
Yuanyan Hu, Shengsheng Wei, Yunfei Li, Junqiang Wang and Mengwei Li
With the widespread application of MEMS sensors in harsh environments, there is an increasingly high demand for their high-temperature resistance. Due to the exceptional mechanical, chemical, and electrical properties of third-generation semiconductor silicon carbide (SiC), pressure sensors utilizing this material are capable of operating in high-temperature environments. However, significant challenges remain in achieving high-temperature interconnects for SiC substrate-based pressure sensors. Among these challenges, wire bonding stands out as one of the most critical interconnect technologies in semiconductor packaging. Its quality directly impacts the long-term reliability of the sensors. Therefore, achieving stable wire bonding under elevated temperatures is crucial for the application of sensors in extreme thermal environments. This study employs a Cr/Al2O3 composite layered structure to achieve high-quality deposition of Pt electrodes on SiC substrates. Through precise control of the bonding process parameters (bonding voltage: 1.6 V, bonding time: 7 ms), a high-strength wire bond with a maximum tensile strength of 390.4 mN was achieved, exhibiting excellent connection stability. Furthermore, the performance of Pt wire bonds was investigated after annealing at 600 °C, 900 °C, and 1200 °C for one hour, including their surface morphology, microstructure, mechanical strength, and electrical properties. Results show that even after annealing at 1200 °C, the bonded interface retained high tensile strength, meeting application standards, and exhibited stable electrical conductivity. This study provides a key technological basis for packaging and interconnection of high-temperature sensors in aerospace applications, which is of great significance for achieving highly reliable packaging of high-temperature sensor devices.
125021
Dasari Srikanya, Chitrakant Sahu, Girdhar Gopal, Arun Kishor Johar and Tarun Varma
This paper introduces a low-cost Dielectric Modulated a-IGZO Nanostructured Thin-Film Transistor (DM-IGZO-TFT) biosensor for the detection of several biomolecules such as Uricase, Urease, Streptavidin, and Biotin, Cholesterol Oxidase, and Zein. The proposed DM-IGZO-TFT biosensor has been simulated and analysed using the TCAD Silvaco simulator. The electrostatic behavior of the biosensor is extensively investigated, including the effects of varying charge densities. The performance of the DM-IGZO-TFT device is assessed by threshold voltage sensitivity (
), drain current sensitivity (
), and transconductance sensitivity (
). The biosensor, when exposed to various biomolecules, exhibits an increase in these sensitivity metrics. It is reported that with the biomolecule shifting from Uricase (k = 1.54) to Zein (k = 5), the
increases from 31.01% to 66.18%,
increases from 46.94% to 116.31%, and
increases 27.60% to 88.16%. The findings of this study reveal that the DM-IGZO-TFT biosensor can contribute to advancements in biosensing technology.
125022
Yadi Wang, Yuhan Fan, Xiang Wang and Qungang Wen
Muon scattering tomography, which leverages multiple Coulomb scattering, has been proposed as a non-destructive assay technique without radiation hazard. In recent decades, innovations have significantly advanced muon tomography. Most muon scattering events occur at small angles which could be well described with a Gaussian model; however, large-angle scattering events receive greater weighting in material property indices, making their accurate characterization critical for reconstruction quality. This paper explores large-angle scattering events and validates a new approach through experiments. Based on Molière’s theory of large-angle scattering, we propose that the scattering angle distribution follows a zero-mean Breit-Wigner model. Cosmic muon scattering events are reconstructed using the Point of Closest Approach (PoCA) method, enabling scattering angle reconstruction. The imaging capability is evaluated using multiple 2 cm×2 cm×2 cm tungsten blocks in various configurations. The results indicate that the Breit-Wigner model exhibits high robustness to angular limitations. This demonstrates its strong potential in Muon Scattering Technology and material discrimination across diverse objects.
125023
Yining Zhang, Jianyang Yu, Ziqi Jiang and Fu Chen
Surface dielectric barrier discharge (SDBD) plasma actuators have demonstrated considerable promise in the domain of active flow control. To optimize their performance, it is essential to understand their discharge characteristics, volume force mechanisms, and energy efficiency. This study numerically investigates the dynamics of SDBD plasma actuators under different drive waveforms, including constant, linear ramp, and sinusoidal voltages. The results show that the polarity of the applied voltage significantly influences discharge modes and volume force generation mechanisms. Positive polarity induces self-sustaining streamers or diffuse glow, generating a downstream volume force. Conversely, at constant voltage, negative polarity is dominated by Trichel pulses, which produce an upstream volume force. When a negative ramp voltage is applied, the discharge transitions from Trichel pulses to a continuous, expanding negative corona/glow, with the volume force shifting from upstream to downstream. For a sinusoidal voltage, discharge triggering is predominantly associated with the rate of voltage change (dV/dt) and is influenced by surface charge accumulation. During a sinusoidal cycle, the discharge pattern undergoes dynamic evolution. It alternates between a positive polarity streamer, diffuse mode and a negative polarity Trichel, glow mode. Parametric studies show that, while the cycle-averaged volume force increases with voltage amplitude, the energy efficiency per unit volume force decreases. The optimal frequency, determined to be approximately 15 kHz, has been shown to maximize the average volume force. However, it has been observed that efficiency may decline when exceeding this threshold, due to the occurrence of inefficient streamer discharges at high dV/dt. The numerical results have been qualitatively validated against experimental optical measurements, thereby confirming the model’s effectiveness. This study provides a comprehensive understanding of SDBD plasma dynamics, volume force mechanisms, and energy efficiency, offering valuable guidance for the design and optimization of plasma actuators in aerodynamic applications.
125024
Tejaswini Sahoo, Naveen Kumar, Prasanna Kumar Sahoo and Soumya Ranjan Panda
This work presents a comprehensive reliability and sensitivity evaluation of the three-channel FinFET designed for hydrogen gas sensing under process-induced variability. The sensor utilizes a platinum (Pt) gate that undergoes measurable work-function (ϕm) modulation in response to varying hydrogen concentrations, ranging from 0 ppm to 104 ppm. TCAD simulations are employed to model the key statistical fluctuation in work-function variation (WFV). Moreover, Gaussian distribution and quantile-quantile (QQ) analysis are used to validate the statistical behavior of threshold voltage (Vth), subthreshold swing (SS), and drain current (ID). The sensitivity of ON-current (Ion), OFF-current (Ioff), and Vth under hydrogen exposure is evaluated with respect to the standard deviation, revealing that Ion sensitivity reaches up to 1144% at minimal drain bias (50 mV). Compared with other state-of-the-art FinFET-based hydrogen sensors, the proposed design demonstrates superior electrostatic control, higher robustness against variability, and enhanced sensitivity, making it a promising candidate for low-power, CMOS-compatible gas-sensing applications.
125025
Chunyun Peng, He Li, Gaoqing Xu and Baoxia Mu
Digital Light Processing (DLP) 3D printing offers a promising route for fabricating complex alumina ceramics, but achieving high density and strength remains challenging. This study investigates the synergistic effects of dispersants and sintering additives on mechanical properties. A hybrid dispersant (7wt%KH-570 + 8wt%BYK-110) enabled a high solid loading of 84 wt%, while yttria (Y2O3) as a sintering additive under 1650 °C sintering conditions, flexural strength was enhanced to 180.37 ± 2.36 MPa and density to 3.74 ± 0.11 g/cm3. However, significant anisotropic shrinkage was observed (X-direction: 10.45 ± 0.37%; Y-direction: 8.45 ± 0.49%; Z-direction: 7.69 ± 1.34%). Conversely, silica (SiO2) minimized shrinkage (<5% linear shrinkage) but reduced the mechanical strength by 49% compared to pure alumina ceramics. The results provide critical insights into dispersant selection and additive-driven densification for high-performance DLP-printed alumina ceramics.
125026
Parul Saini, Shivani Malhotra and Lipika Gupta
The paper introduces a compact and wideband RF rectifier optimized for efficient energy harvesting, offering improved performance. The rectifier is capable of efficiently converting RF signals across a broad frequency range, from 1.7 to 2.7 GHz, covering a diverse range of applications which include GSM/4G at 1.8 GHz, UMTS/3G at 2.1 GHz, Wi-Fi and Bluetooth within the ISM band at 2.4 GHz, and 4G LTE/5G at 2.6 GHz. The circuit is designed using Schottky diode in voltage doubler topology. Surface mount device components are used in modified Pi-network configuration along with an additional series resonant inductor for impedance matching to improve the performance of the rectifier without increasing its complexity. A wideband rectifier spanning from 1.7–2.7 GHz with measured conversion efficiency of ≥ 60% has been achieved for input power level of 3 dBm, utilizing a terminal load impedance of 1.51 kΩ with maximum power conversion efficiency (measured) as high as 70.62% at 2.35 GHz. Additionally, the conversion efficiency of the rectifier remains ≥ 30% across the entire frequency range for input power levels from -8 to 7 dBm and ≥ 50% PCE for load resistances between 0.58 kΩ and 3.26 kΩ, indicating robust performance under varying input power reduced sensitivity to variations in load resistance. These features make the proposed rectifier a decent option for easy integration with wideband antennas for ambient RF energy harvesting supporting compact and self-sufficient IoT devices.
125027
Peter Lianlunthang TD and Monmoyuri Baruah
Numerical simulations show that Saturn’s dynamical oblateness (
) significantly influences the orbital behaviour of micron-sized grains in the D68 ringlet. The perturbation triggers resonant radial oscillations (amplitude: 1,313 km; period: 4.89 h) between periapsis (65,001.87 km) and apoapsis (67,628.00 km), driven by anti-phase coupling of the semi-major axis (67,630.1 km–67,740.5 km, σa = 39.0 km) and eccentricity (e = 0.0000–0.0404). Azimuthal motion accelerates by 8% due to eccentricity-modulated kinematics and phase-locking, causing positional jitter (δs ≈ ± 1.16 km). The motion stays confined to the equator (Δi < 10−6 deg). Hamiltonian chaos appears during apsidal precession with the argument of periapsis (ω) oscillating between bounded libration (±50° near 90°/270°) and circulation, with chaotic jumps (Δω ≈ 355°) at separatrix crossings. Although inertial-frame energy remains conserved (|ΔE| < 10−8), the simulated angular momentum (Lz) shows non-physical drift (7.6%) during chaotic transitions, indicating numerical sensitivity. Importantly, the simulated orbital chaos, including high eccentricity (e ≤ 0.0404) and kinematic jitter, contrasts with D68’s observed low eccentricity (e ≈ 3.7 × 10−4) and longitudinal coherence. This suggests that damping mechanisms (such as collisions or plasma drag) actively suppress
– driven chaos in the ringlet.
125028
D Mohana Krishnudu, P Venkateshwar Reddy, RV Saikumar Reddy, AC Umamaheshwer Rao and Vijay Kumar Mahakur
Recently, natural fiber composites (NFC) are increasingly recognized for their biodegradability, cost-effectiveness, and lower ecological footprint as opposed to synthetic equivalents. The research looks at the attributes of Abutilon indicum fiber-based composites, with an emphasis on their potential as sustainable materials. The fibers underwent treatment with sodium hydroxide to increase their interface adherence to the matrix. The hand layup process has been employed to generate composites with fiber concentrations of 10%, 20%, and 30%. Dynamic Mechanical Analysis (DMA) became utilized for assessing viscoelastic parameters at a temperature range of 28 °C–190 °C. The results have showed that the 20% fiber-based specimen has improved mechanical traits, including maximal storage modulus and ideal damping characteristics, which are attributable to improved crystallinity and effective fiber-matrix collaboration. Furthermore, dielectric characteristics are assessed, demonstrating that the dielectric constant dropped with increasing frequency, with the maximum value observed for the 20% composite. The results imply that Abutilon indicum fiber-based material have promised thermal stability, thus rendering them appropriate for a wide range of purposes in sectors seeking ecologically conscious materials. This study adds to our knowledge of NFC and its ability to substitute synthetic materials in composite manufacture.
125029
The following article is Open access
Yigit Karabulut, Murat Ayaz, Serkan Aktaş, Erkan Meşe and Shaun D Gregory
Mechanical circulatory support (MCS) systems are implantable devices designed to assist or replace the pumping function of a failing heart, ensuring adequate systemic circulation. Because they must operate continuously and under variable physiological loads, these systems require compact and energy-efficient electric drives. This study examines an MCS configuration that integrates a dual axial-flux permanent magnet synchronous motor (dual-AFPMSM) and operates it with a load-sharing strategy to improve overall efficiency and extend battery life. In the proposed approach, the torque demanded by the axial-flow pump is distributed between two identical AFPMSMs so that each motor operates closer to its high-efficiency region, thereby reducing AFPMSM losses; this is the fundamental mechanism behind the efficiency gain. The AFPMSM was integrated into the axial-flow pump with priority given to volumetric efficiency and unobstructed blood flow, and application-specific constraints were considered during the mechanical design. Finite element analysis (FEA) was used to validate motor performance under the target operating conditions. A comparison of single- and dual-AFPMSM operation shows that, under rest conditions, load sharing improves efficiency by 11.8%–17.4%, while under exercise conditions it improves efficiency by 6.5%–14.7%. This reduction in electrical power demand translates into up to a 14.6% increase in battery operating time during exercise. These results indicate that a dual-AFPMSM architecture with explicit load sharing is a promising option for next-generation MCS devices, providing reliable circulatory support with improved energy utilization and longer runtime.
125030
A K Dhaikar and R S Pandey
In this study, we investigate the characteristics of whistler mode wave instability in the relativistic magnetized plasma environment of Jupiter’s magnetosphere at 10 Jupiter radii (RJ) using a subtracted bi-Maxwellian distribution function. The dispersion relation is derived from the linearized Vlasov–Maxwell equations for parallel propagating whistler waves, incorporating relativistic effects and temperature anisotropy. We have employed a latitudinally varying magnetic field given by
, which reflects the realistic spatial configuration of Jupiter’s dipole-dominated magnetosphere and significantly affects wave growth and propagation characteristics. The refractive index is calculated from the dispersion relation, offering critical insights into wave phase velocity, energy transport, and the anisotropic behaviour of the plasma. This refractive index analysis serves as an important diagnostic for understanding wave-particle interactions and the dynamics of high-energy electrons in Jupiter’s radiation belts. The results of these analyses are illustrated using by varying parameters of temperature anisotropy
, relativistic factor
, loss cone width parameter
, loss cone amplitude parameter
, and magnetic latitude variation
. Such detailed parameter studies provide a framework for interpreting spacecraft observations from missions like Juno and Galileo and contribute to a better understanding of plasma instabilities in strongly magnetized planetary environments.
125031
Yao Li, Guangxu Xiao, Dongbai Xue, Yuying Xie, Senlin Jin, Lingling Ren, Chunling He, Xiao Deng, Xinbin Cheng and Tongbao Li
Nanometrology guarantees the dimensional accuracy in nanomanufacturing. As integrated-circuit features shrink progressively, the conventional laser-wavelength traceability system becomes highly susceptible to ambient disturbances and fails to meet in situ production requirements. Referencing a quantized optical-lattice constant, a flattened traceability chain provides higher throughput and enhanced environmental robustness by reducing the number of calibration transfer steps. Its cornerstone is the self-traceable grating. The grating’s pitch is directly traceable to the 7S3→7P40 transition frequency of chromium (Cr) atoms, which provides picometer accuracy. However, this accuracy is vulnerable to thermal expansion. We developed a thermo-mechanical coupling model to quantify temperature effects and analyze the pitch expansion. This model was validated by finite element simulation (FES). The analysis reveals a cooperative mechanism for stress relief. This mechanism involves interfacial constraints caused by the thermal expansion coefficient (CTE) mismatch between the substrate and the atomic layer. These constraints work in concert with a buffer layer to relieve stress. Within (20 ± 5) °C, the pitch expansion of a 212.78 nm Cr grating decreases from 0.5 to 0.04 pm °C−1 when silicon substrate is replaced by zero expansion glass. This represents an order-of-magnitude improvement. Pitch expansion scales linearly with buffer layer thickness, albeit with opposite slopes for the two substrates. The proposed model and optimization rules furnish theoretical and engineering guidance for boosting nanometrological precision, and fortifying traceability reliability.
Quantum optics, processing and information
125101
Yi-Min Guo, Fu-Quan Dou and Wen-Yuan Wang
Skin mode transport is highly promising for robust and directional information transfer, which is crucial for the advancement of quantum technologies. Typically, the directed transport of topological edge states via pumping requires a band gap to protect these states against local perturbations. However, gapless topological pumping, especially concerning the directional transport of non-Hermitian skin modes, remains significantly underexplored despite its potential for novel transport phenomena. Here, we demonstrate efficient and highly nonreciprocal skin mode transport within a gapless pumping framework. This is accomplished through implementing a topological pumping chain in a nonreciprocal synthetic momentum-state lattice, which inherently bypasses the requirement for spectral gaps. Using two distinct pumping protocols, namely, exponential and cosine pumping, we investigate both fast and more adiabatic transport regimes. Our results show robust skin mode transport with high fidelity and pronounced directionality in all cases. Through a detailed eigenmode analysis of the gapless pumping cycle, we elucidate the underlying physical mechanism, which stems from the interplay between the non-Hermitian skin effect and the driven topological pumping dynamics. This work establishes gapless topological pumping as a viable platform for controlled directional transport of skin modes, with potential implications for quantum simulation and information transfer in engineered non-Hermitian systems.
125102
Rashi Jain and Satyabrata Adhikari
Entangled quantum states are regarded as a key resource in quantum key distribution (QKD) protocols. However, quantum correlations, other than entanglement can also play a significant role in the QKD protocols. In this work, we will focus on one such measure of quantum correlation, known as geometric quantum discord (GQD). Firstly, we derive an analytical expression of GQD for two-qutrit quantum systems and further generalize it for d1 ⨂ d2 dimensional systems. Next, we apply the concept of GQD in studying QKD. In particular, if the shared resource state is an entangled state constructed with the linear combination of the tensor product of the Bell pair and the state σi’s, i = 0, 1, 2, 3, then we have shown that under some assumption on σi’s, the lower bound for a distillable secret key rate KD can be expressed in terms of GQD of
and
. Thus, the distillable key rate depends upon the GQD of
and
, when the communicating parties uses private states for generating a secret key in presence of an eavesdropper. Further, for a certain range of GQD of
and
, we find that there exists some NPT entangled resource state for which the successful generation of the secret key may not be guaranteed. We, moreover study the behavior of distillable key rate when the geometric discord of
and
increases, decreases or remains constant, with the help of a few examples.
125103
Anindya Banerji, Ali Anwar, Hrushikesh Sable, Nijil Lal and Ravindra P Singh
In this work, we investigate the orbital angular momentum (OAM) spectrum of photons generated via spontaneous parametric down-conversion (SPDC) and study how shaping the transverse profile of the pump beam influences the resulting spectrum. Using a perfect optical vortex (POV) mode as the pump, we show that the OAM spectrum narrows significantly, leading to purer OAM states. We further examine the entanglement between the down-converted photons in the OAM basis, finding that Laguerre–Gaussian (LG) pumped photons exhibit increased higher-dimensional entanglement at the expense of mode purity.
125104
Yan-Ling Li, Zichen Mu and Xing Xiao
Superdense coding is a fundamental protocol in quantum information theory that facilitates the transmission of classical information at capacities exceeding classical limits by exploiting quantum entanglement. However, the presence of noise in communication channels, particularly in the case of Pauli channels, poses a significant challenge to the efficiency of superdense coding. In this paper, we explore an active protocol designed for scenarios involving two distinct, addressable noisy channels. We investigate how a quantum switch, by actively composing these two channels in an indefinite causal order, can construct a new composite channel with significantly enhanced capacity. Our findings indicate that, when confronted with the same type of Pauli channels which are commutative, the quantum switch offers no advantage over classical strategies constrained by definite causal order. Remarkably, when two different channels are composed, the quantum switch can exploit the non-commutativity of their underlying operators to coherently cancel their noise effects. This vividly illustrates the ‘different is more’ principle: using the quantum switch to actively compose two different non-commuting channels yields a significant capacity gain over composing two identical commutative channels. This underscores the potential of the quantum switch as a tool for active noise-aware protocol design, where the difference itself is a resource, rather than as a tool for passive noise mitigation.
125105
Arnab Chatterjee, Subrata Sarkar and Suvamoy Changder
Color images (i.e. RGB) contain rich visual information essential for object recognition, spatial context analysis, and decision-making across fields such as medical imaging, remote sensing, and computer vision. Processing such data efficiently requires significant computational resources, which can be addressed by the parallelism and speed of quantum computing. Representing RGB image data within quantum states enables efficient and scalable processing compared to classical methods. In recent years, various quantum image representation techniques have been developed based on probabilistic and basis state encoding. Probabilistic encoding methods are efficient for representing quantum binary images but face challenges in accurately reconstructing RGB images. This is due to the randomness introduced by measurement. To overcome this limitation, several basis state encoding approaches have been proposed. These methods map classical pixel values directly to quantum basis states. Thus enabling accurate grayscale and RGB image representation. However, they often require a larger number of qubits and complex gate operations, leading to higher circuit preparation costs. So, there exists substantial potential for quantum probabilistic RGB image representation using randomized measurements. Hence, our objective is to develop a probabilistic quantum image representation, capable of representing RGB images using fewer qubits. This method aims to reconstruct the classical image with high accuracy using randomized measurements, thereby addressing the major limitations of probabilistic methods. To balance image quality with resource efficiency, we propose an Improved Probabilistic Quantum Image Representation (IPQIR) method based on equal superposition states. This approach utilizes a quantum circuit with Hadamard Gate to encode classical pixel values into equal superposition states. The original image is then reconstructed by performing multiple quantum measurements and applying expectation value estimation to average the outcomes. To align with existing research in quantum image representation, quantum state tomography and different applications are utilized as standard evaluation methods to assess the effectiveness of the proposed algorithm. The tomography achieved a fidelity of 97.51%. In addition, various parametric and non-parametric statistical tests were performed to verify the accuracy of the reconstructed classical image. The high Pearson (0.9983) and Spearman (0.9959) correlation coefficients indicate a nearly perfect linear and monotonic relationship between the original and reconstructed images.
125106
Zhiqiang Guo, Jianbin Hu, Wenyu Yang and Yunqian Wang
This paper addresses Quantum Federated Learning (QFL), an adaptation of classical federated learning for quantum computing that enables collaboration among multiple quantum devices. A significant challenge in QFL arises from non-independent and identically distributed (non-IID) data, primarily due to inherent variations in quantum devices and environments, which substantially degrades performance. To mitigate this, we propose novel QFL algorithms that employ weighted averaging and clustering-optimized averaging strategies. Specifically, Quantum Weighted Federated Averaging (QW-FedAvg) is introduced, which utilizes a model aggregation strategy combining quantum weighted averaging with a global data-sharing mechanism to reduce the impact of non-IID data. Building on this, we further propose the Quantum Federated Clustering-Optimized Averaging (QF-COA) algorithm. QF-COA enhances performance by selecting client-side training parameters that demonstrate superior efficacy through a clustering method, thereby further minimizing the adverse effects of non-IID data on model performance. Our models were trained and evaluated using the MNIST and Fashion-MNIST datasets. Simulation results demonstrate that the proposed algorithms improve accuracy by 2% to 5% in non-IID environments compared to traditional quantum federated averaging algorithms. Additionally, these advancements lead to enhanced communication efficiency and increased robustness. These improvements contribute to the greater generalization and adaptability of QFL frameworks, offering both theoretical insights and practical guidance for future research in the field. The source code is available at https://github.com/wang-lab-repository/qavg-gzq.git.
125107
Chen-Huan Wu
We investigate the dynamics of an open quantum system comprising a two-level electronic system coupled to local boson mode and a bosonic bath. The system is described by four distinct states, including the ground and excited electronic states, each with its corresponding zero- and one-boson vibrational levels. The dissipative dynamics arising from interactions with an external environment are modeled using two distinct theoretical frameworks: the standard Lindblad master equation and a non-Hermitian effective Hamiltonian approach. We derive the full Liouvillian superoperator for both formalisms, revealing a crucial distinction: while the Lindblad equation accounts for both state decay and repopulation via quantum jumps, the non-Hermitian formalism only captures the decay, leading to non-conservation of the total system probability.
125108
Xingjing Zhang, Nengfa Wang, Kai Gu and Zixin Liu
In the classical commons game, shepherds’ complete rationality causes the Tragedy of the Commons (ToC). Based on bounded rationality, we develop a dynamic Frackiewicz quantum commons game model to explore quantum entanglement’s effects on grazing strategies and profits, analyze quantum equilibrium stability, and apply synchronization control. Our Contributions: (1) The stability of quantum equilibrium depends on the adjustment speed and the squeezing parameter: it remains stable at low adjustment speeds and when the squeezing parameter is close to its critical value (i.e.,
), but exhibits bifurcation or chaos otherwise. (2) Enhanced entanglement expands the stability region, mitigates individual rationality-induced conflicts, and boosts collective profits. Within the Frackiewicz framework, the quantum model optimizes ToC outcomes: the number of sheep never exceeds the classical level, while profits rise with entanglement and never fall below the classical level. (3) Synchronization control ensures strategy evolution convergence to stabilize the system. Physically, entanglement strengthens strategy correlations, suppresses bounded rationality-induced chaos, and expands the stable parameter region, offering a quantum solution to ToC.
125109
Alexandre C Ricardo, Gubio G de Lima, Amanda G Valério, Tiago de S Farias and Celso J Villas-Boas
Continuous-variable quantum computing (CVQC) uses quantum states with continuous degrees of freedom, such as the quadratures of bosonic modes, to encode information, promising efficient solutions to complex problems. Trapped-ion systems provide a robust platform with long coherence times and precise qubit control, enabling the manipulation of quantum information through its motional and electronic degrees of freedom. In this theoretical work, we quantitatively analyze the fidelity of a Kerr operation in a single trapped-ion system, calibrating the interaction time using a motional-state Rabi frequency correction. Through numerical simulations, we validate Gaussian and non-Gaussian CVQC operations, achieving fidelities exceeding 99% in all cases, including non-Gaussian operations. Furthermore, we demonstrate two key applications: first, the implementation of a continuous-variable quantum neural network for regression problems, which exhibits low error rates; and second, its application to state preparation tasks, achieving a fidelity of 90% for the given example. These results open new opportunities to execute quantum computing algorithms on continuous variables with trapped ions, such as quantum machine learning algorithms.
125110
Yi Wei, Zhan Yu, Ying Li, Yu Kou, Zongguang OuYang, Daili Wang, Sheng Yuan and Xin Zhou
Single-pixel panoramic imaging (SPPI) technology, which integrates convex mirrors with computational imaging algorithms, achieves efficient panoramic perception and demonstrates application potential in autonomous driving perception, pipeline inspection and low-altitude related applications. However, its algorithmic efficiency and accuracy still require optimization. This study improves the SPPI system from two aspects: modulation mode and reconstruction algorithm. In terms of modulation, the Walsh-Hadamard (W-H) orthogonal basis structure pattern is introduced, which effectively alleviates the noise sensitivity problem of the random mode in SPPI. In terms of algorithms, this study adapts and optimizes two key approaches for panoramic scenes: the orthogonal algorithm based on two-dimensional (2D) W-H transformation and the 2D compressive sensing (2DCS) algorithm based on the 2D Variational Augmented Lagrange Multiplier (V2DALM). These approaches enable independent asymmetric sampling in the radial and angular dimensions, allowing flexible configuration of sampling resources according to the characteristics of different scenes. The experimental system adopts a passive imaging mode, further enhancing the practicality and adaptability of SPPI. This study provides a scalable theoretical support for single-pixel panoramic perception systems and corresponding SPPI schemes for three typical requirements: high-fidelity imaging, high-speed reconstruction, and speed-fidelity trade-off. Finally, the SPPI performance of the V2DALM algorithm under different modulation patterns has been preliminarily analyzed and discussed.
125111
Guangrui Jia, Yuhang Miao, Yancheng Mao, Chaochao Qin and Zhongpo Zhou
The generation of terahertz (THz) radiation by a photoconductive antenna (PCA) is investigated through the interaction between a laser and a semiconductor. The dynamic changes of charge carriers on the antenna surface under 50 fs laser excitation (λ = 800 nm) are simulated using COMSOL Multiphysics v6.1 software based on the finite element method. The electric field radiation resulting from changes in the semiconductor surface electric current is simulated using CST Studio Suite 2022. A new PCA with unequal spacing electrodes is presented, which generates a non-uniform field using a metal microstructure (500 nm height, 500 nm diameter). Finite-difference time-domain (FDTD) simulations revealed more pronounced surface plasmon resonance enhancement effects for the new PCA, with a ~1.3 times increase in light absorptivity and a ~130 times increase in electric field intensity. This leads to a ~1.6 times enhancement in THz radiation intensity. Additionally, the directivity of the new PCA increases from 1.2 dBi to 7.17 dBi at 1.3 THz. This PCA is designed for straightforward fabrication and significantly enhances THz radiation intensity, aiming to meet the demands of rapidly developing communication technologies.
125112
The following article is Open access
Cedric Gaberle and Manpreet S Jattana
We propose an optimization method for the Variational Quantum Eigensolver (VQE) that combines adaptive and physics-inspired ansatz design. Instead of optimizing multiple layers simultaneously, the ansatz is built incrementally from its operator subsets, enabling subspace optimization that provides better initialization for subsequent steps. This quasi-dynamical approach preserves expressivity and hardware efficiency while avoiding the overhead of operator selection associated with adaptive methods. Benchmarks on one- and two-dimensional Heisenberg and Hubbard models with up to 20 qubits show improved fidelities, reduced function evaluations, or both, compared to fixed-layer VQE. The method is simple, cost-effective, and particularly well-suited for current noisy intermediate-scale quantum (NISQ) devices.
125113
Radja Mermoul, Ayyoub Slimani and Achour Benslama
Efficient quantum comparators are a key building block in quantum algorithms, but their practical utilization during the Noisy Intermediate-Scale Quantum (NISQ) era is limited by high resource demands. In this paper, we present an automated and scalable approach focused on the synthesis of optimal n-bit quantum comparator circuits that significantly minimize key quantum parameters, namely quantum cost (QC), quantum delay (QD), and garbage outputs (GO). Our approach uses a dynamic algorithmic framework built with Python and Qiskit to adapt the circuit design based on the size of the input operands. This enables the automatic generation of resource-efficient, modular designs. Through systematic optimization of qubit assignment, gate ordering, and sub-circuit composition, our full circuit achieves substantial performance gains. Experimental validation using 4-bit comparators demonstrates 14.89% reduction in QC, 12.5% in QD, and 18.75% in GO over state-of-art designs, as validated through noise-free simulations under NISQ-era limitations. Although the algorithmic scalability of the produced circuits allows straightforward generalization to any n-bit operands without any loss in optimization quality. These findings confirm the effectiveness of our approach, suggesting that it may lead to further optimizations for related quantum circuits, including as Arithmetic Logic Units.
125114
Marziyeh Narouei, Ahmed Elbarbary, Appikatla Phani Kumar, Erfan Abbasian and Ashish Sachdeva
This paper presents a novel low-power, read-disturbance-free, and half-selection-free 9T SRAM cell based on carbon nanotube field-effect transistor (CNTFET) technology. The proposed SRAM cell features a single-ended, decoupled read path, and a write-assist mechanism to enhance both read static noise margin (RSNM) and write static noise margin (WSNM). Extensive simulations demonstrate significant improvements in stability, power efficiency, and process variation resilience. At a supply voltage of 0.5 V, the proposed SRAM cell exhibits a 105.65% higher RSNM than the traditional 6T SRAM cell, along with reductions in read and write power by up to 63.98% and 57.60%, respectively. Additionally, Monte-Carlo analysis confirms robust performance under process variations, with minimal variability in RSNM, WSNM, and leakage power. The proposed design is particularly suited for low-voltage, high-density memory applications, offering a balanced trade-off between speed, stability, and energy efficiency.
125115
Xiaodong Ding, Yingying Wang, Haiping Dang, Shiqin Di and Shunli Zhang
The electrocardiogram (ECG), as a key tool for medical diagnosis, accurately captures the dynamic changes in electrical potential of the heart during repolarization, which is crucial for assessing cardiac function abnormalities. In the face of the surge in ECG data volume, the development of efficient, accurate, and fast algorithms for abnormality monitoring has become the key to reducing the burden on physicians and improving the efficiency of diagnosis and treatment. Traditionally, although deep learning models such as LSTM and convolutional neural networks show potential in this area, their large parameter sizes and computational complexity limit further applications. To break through this bottleneck, we innovatively incorporate the unique advantages of quantum computing and design a framework based on embedded quantum-enhanced neural network (QENN) feature mapping for ECG feature extraction. Accurate monitoring of ECG is achieved by seamlessly migrating the output of QENN to the classical, fully connected layer. This attempt, to the best of our knowledge, is the first time that quantum computing technology has been successfully and effectively combined with traditional methods in the field of ECG monitoring. The experimental results show that, compared to popular traditional methods such as LSTM and convolutional neural networks, our proposed method maintains or even surpasses the detection performance of these mainstream methods while significantly reducing the parameter requirements (up to one-twentieth of them). This result not only demonstrates the great potential of quantum computing in biomedical signal processing but also opens up new paths for future ECG arrhythmia detection.
125116
S Akbari-Kourbolagh, A Mahdifar and H Mohammadi
In this article, we introduce generalized Gilmore-Perelomov-type coherent states of a quantum harmonic oscillator on a circle and demonstrate that their underlying algebra is a deformed su(1,1). The effects of the circle’s spatial curvature are inherently encoded in these states, making them suitable for investigating curvature-induced phenomena in quantum optical processes at laboratory scales. Furthermore, we propose an experimental scheme to realize these states based on the intensity-dependent version of the Jaynes–Cummings model appearing in a laser-driven trapped ion. Employing the nonlinear coherent states of the atomic center of mass motion of a trapped ion, it is possible to control the laser-ion interaction in such a way that Gilmore-Perelomov-type circle coherent states are obtained as motional dark states of the system. Finally, by examining quadrature squeezing, we demonstrate that unlike standard coherent states which exhibit no squeezing, these curvature-dependent states display curvature-tunable squeezing effects. This property makes them particularly valuable for applications in high-precision metrology.
125117
Kaiyi Shi, Chen Yang, Haoyang Wang, Zhang Yujia, Ma Duo, Ma Fangze and Haiqiang Ma
Quantum key distribution (QKD) is a theoretically unconditionally secure key distribution method based on quantum mechanical principles. Currently, most QKD protocols encode information in the phase domain, making the phase error rate a crucial physical parameter for evaluating protocol performance. In phase-post-selected QKD protocols, the phase error rate depends on interference measurements within non-zero phase intervals, which introduce inherent errors unrelated to eavesdropping and consequently leads to overestimation of the phase error rate. Precise analysis of phase errors can effectively reduce the protocol’s phase error rate, thereby enhancing its performance. In previous work, phase error analysis methods were primarily applied to QKD protocols under asymptotic conditions. In this study, we extend this precise phase error analysis approach to the finite-key regime of asynchronous measurement-device-independent QKD (AMDI-QKD). The performance of the original and enhanced AMDI-QKD protocols was compared under different pulse intensities through numerical simulation, and the results indicate that, compared to the original AMDI-QKD, the enhanced AMDI-QKD protocol combined with precise error analysis can extend the transmission distance by nearly 20 km and effectively reduce the phase error rate.
125118
Qi Han, Rong Zhang, Jingyi Zhang, Shijiao Xing and Ziyi Ma
In this paper, within the framework of continuous-time quantum walks (CTQWs), we decompose graphs into disjoint strata by adopting the idea of equitable partitions. Based on the thought, we investigate the success probability of finding marked vertices on the N-fold star power graph G⋆N (where G is a cycle graph with three vertices), as well as the time required for perfect state transfer. Additionally, we explore the time for perfect state transfer on G⋆N under partition conditions from the perspective of quantum probability. Specifically, we surprisingly discover an interesting result: the times for perfect state transfer under quantum probability-based partitions and equitable partitions are completely consistent when the coupling strength J = 1 and the parameter λ = 1.
125119
The following article is Open access
Ugnė Liaubaitė and S E Skelton
Quantum error mitigation (QEM) protocols have provably exponential bounds on the cost scaling; however, exploring which regimes QEM can recover usable results is still of sizable interest. Herein, we are interested in the performance of QEM with a template for quantum algorithms, quantum signal processing (QSP). We design a QSP-based Hamiltonian simulation of a modified Ising model under depolarizing noise for low precision and varying simulation times. We show for which of the explored noise and depth regimes our ZNE protocol can recover an approximation of the noiseless expectation value. We discuss existing bounds on the sample budget, eventually using a fixed number of shots. While this does not guarantee the success of QEM, it gives us usable results in relevant cases. Finally, we briefly discuss and present a numerical study on the region where ZNE is unusable, even given an unlimited sample budget.
125120
Awad Wehbe, Safiya Al Khatib and Abdel-Mehsen Ahmad
Effective circuit partitioning is critical for Noisy Intermediate-Scale Quantum (NISQ) devices, which are hampered by high error rates and limited qubit connectivity. Standard partitioning heuristics often neglect gate-specific error impacts, leading to suboptimal divisions with significant communication overhead and reduced fidelity. This paper introduces Fidelipart, a novel framework that transforms quantum circuits into a fidelity-aware hypergraph. In this model, gate error rates and structural dependencies inform the weights of nodes (gates) and hyperedges (representing multi-qubit interactions and qubit timelines), guiding an Mt-KaHyPar partitioner to minimize cuts through error-prone operations. We evaluated Fidelipart against BQSKit’s QuickPartitioner on 6-qubit/22-gate (‘Circuit S’), 10-qubit/55-gate (‘Circuit M’), and 24-qubit/88-gate (‘Circuit L’) benchmarks under a linear topology with a consistent local contiguous re-mapping strategy. Results demonstrate Fidelipart’s superior performance. It achieved SWAP gate reductions ranging from 77.3% (Circuit L) to 100% (Circuit S) and up to a 52.2% decrease in cut qubits (Circuit L). These physical improvements directly translated to estimated fidelity gains ranging from 27.3% (Circuit S) to over 254.8% (Circuit M). While Fidelipart showed a modest runtime increase of 8-13% and variable effects on maximum partition depth, its substantial enhancement of circuit fidelity highlights the significant benefits of integrating detailed error-awareness into the partitioning process for more reliable NISQ computations.
125121
Dai-Gyoung Kim, Maryam Shakoor, Sadia Riasat, Mahrukh Ahsan, Asif Mushtaq and Zahid Hussain Shamsi
Quantum machine learning (QML) is anticipated to exhibit enhanced computing abilities as compared to its classical counterpart. However, one of the key issues in its potentially superior performance is the creation and propagation of quantum errors in quantum circuits. In Noisy Intermediate Scale Quantum (NISQ) era, one of the remedies is to impose the constraints on the number of quantum resources and to restrict the depth of quantum circuits. However, in the case of very large number of features in the data-sets, QML with restricted quantum resources may not yield reliable classification accuracy. In order to address these limitations, this study introduces a novel approach that leverages QML through precision matrix-based feature selection. More specifically, we considered the quantum version of support vector machines (PM-QSVM) to analyze the impact of the suggested feature selection mechanism. In addition, the impact of various kernel based quantum encodings of the selected features is also investigated. Moreover, the sensitivity analysis is carried out to ascertain the reliability of the feature selection mechanism. Our findings and the experimental results demonstrate how the integration of the suggested mechanism with quantum computing can enhance the decision making process.
125122
Yu Sang, Jie Liu and Lei Tan
The superfluid-Mott insulator and ergodic-many body localization transitions based on a two dimension nonlinear cavity optomagnonic system are investigated, where a yttrium iron garnet (YIG) sphere is embedded at each site of a two-dimensional coupled cavity array. We demonstrate that introducing phonon-photon coupling enhances the system’s coherence in the presence of the YIG sphere’s Kerr nonlinearity. In contrast, the photonic Kerr nonlinearity more effectively stabilizes the Mott insulating phase than the magnonic nonlinearity. The underlying physical mechanism is clarified by calculating the system’s effective repulsive potential. For the ergodic–many body localization transition, we find that increasing the disorder strength drives the system from the ergodic to the many-body localized phase, while a higher chemical potential enlarges the ergodic region. This work provides a unified framework for characterizing quantum phase transitions in cavity optomagnonic systems and offers an experimentally feasible route for their realization, paving the way for exploring complex many-body phenomena in hybrid quantum platforms.
125123
Moteb M Alqahtani, Ghayda A Abushawarib and Barry M Garraway
A method is presented for transfer of a quantum state from one atom to another atom. In this method, we consider the interaction of a multi-mode cavity with a multi-level quantum system and adopt the multi-photon resonance theory for preparing an efficient quantum memory and a quantum network. From the use of effective two- and three-level Hamiltonians, the proper values for interaction times, coupling constants, and detunings are predicted. To examine the sensitivity of the quantum state transfer against decoherence processes, we introduce the quantum-jump approach. Proceeding with this approach leads to a description of the system via wavefunctions instead of density operators and provides simple effective differential equations for obtaining analytic expressions of the probability amplitudes.
125124
Gang Ren
This paper presents an optical scheme for realizing the Hadamard gate (HG) using linear optical elements, including a beam splitter (BS) and a phase shifter, and explores its application in a novel interferometer design. Key aspects investigated include phase sensitivity via quantum Fisher information (QFI) and intensity-based detection methods, entanglement detection using the Shchukin-Vogel (SV) criteria, polarization properties through Stokes operators, and quantum squeezing effects, including difference and sum squeezing. Results indicate that the interferometer achieves phase sensitivity below the shot-noise limit (SNL), approaching the Heisenberg limit (HL) in specific regimes, and exhibits strong non-classical behaviors such as entanglement and squeezing, particularly at low photon numbers and specific phase angles. This work highlights the potential of HG-based interferometers for advanced quantum information processing and precision measurement applications.
125125
The following article is Open access
C H Raymond Ooi and Shreyes Subramaniam
Stimulated Raman scattering (SRS) is highly relevant to quantum memories involving Raman system. Using quantum Langevin equations with complete noise operators coupled to the quantum field propagation equation, we present a general theory of SRS for moving quantum particles where quantum Stokes pulse couples to both transitions (m1 and m3) while an arbitrary laser pulses couple to only one (m1) transition. Our coupled equations contain dynamical ac Stark shift due to laser pulses and Doppler shift, complete quantum noise operators and atomic coherences corresponding to all possible three transitions (not only the ground state coherence), quantum mechanical microscopic expressions for linear and nonlinear interactions with nonlocal (memory) or temporal dispersion effects. We obtain an analytical solution of the quantum Stokes field in laboratory spacetime with generalized quantum noise operators that include all initial atomic coherences and arbitrary initial and boundary quantum fields, valid for arbitrary laser pulses. The general solution provides a complete physical picture, composed of basically two parts: above and below the light line, t = z/c. This robust framework offers a powerful tool for optimizing Raman-based quantum information processes, particularly for modeling the spatial-temporal dynamics of quantum Stokes pulses in storage and retrieval stages of quantum memory.
125126
Hamad Ali, Abdul Basit, Pengbo Li, Xiaojie Li and Xuecheng Cao
125127
The following article is Open access
Gilberto Silva-Ortigoza, Emmanuel Paz-Córdova, Israel Julián-Macías, Gerardo Francisco Torres del Castillo, Iraís Rubalcava-García, Cupatitzio Ramírez-Romero, Mercedes Paulina Velazquez-Quesada and Victor Vázquez-Báez
In the present work we use a point transformation defined in the extended configuration space to show that, in both classical and quantum formalisms, the evolution of a particle under the influence of a constant gravitational field can be related to the evolution of the harmonic oscillator. That is, in the classical mechanics regime, we show that this transformation allows us to establish the connection in the Newtonian, Lagrangian, Hamilton-Jacobi and Hamiltonian formalisms. In the quantum mechanics regime, the transformation determines a relationship between the wave functions, solutions to the corresponding Schrödinger equations, the propagators and the Wigner functions. Furthermore, by using the quantum potential approach to quantum mechanics, we show that the classical point transformation, in a natural manner, induces a quantum point transformation in the corresponding extended quantum configuration space, that determines the connection between the corresponding Madelung-Bohm trajectories. We find that the quantum transformation has the same functional form as the classical one even though the quantum or Madelung-Bohm trajectories are in general totally different from the classical ones. Then, we show that the general results can also be applied to the corresponding paraxial wave equations, and by using the stationary solutions of the quantum Harmonic oscillator and the Airy solution obtained by Berry and Balazs, as two applications, we determine the evolution of the Hermite-Gaussian and Airy beams in free space, in a linear and in a quadratic optical media. Finally, by using the point transformation, we construct two metrics whose geodesics correspond precisely to the classical trajectories for the harmonic oscillator and a particle in a uniform gravitational field.
125128
Darshana Yadav
Quantum Secret Sharing (QSS) mitigates critical vulnerabilities in classical cryptographic protocols by leveraging quantum mechanics to achieve information-theoretic security. However, existing QSS schemes encounter challenges related to scalability, resistance to collusive attacks, and the lack of robust participant authentication. This paper proposes a novel (r, m) threshold QSS protocol that integrates group authentication with quantum–classical hybrid techniques to address these limitations. By incorporating the Quantum Fourier Transform (QFT), Inverse QFT (IQFT), and controlled-U gate operations within a trivariate polynomial secret-sharing framework, the protocol enhances security against intercept-resend, entangle-measure, and collusive attacks while reducing computational overhead. A practical example is provided to validate the protocol’s effectiveness.
Mathematical physics, complex systems and nonlinear dynamics
125201
Mohamed Jleli and Bessem Samet
We study a generalized convexity notion associated with the self-adjoint differential operator
for functions p > 0 and q ≥ 0. A function is said to be Dp,q-convex if Dp,qf ≥ 0 on an interval. Using auxiliary solutions of Dp,qu = 0 obtained via the maximum principle, we establish sharp gradient-type estimates and a two-point comparison inequality showing that any Dp,q-convex function lies below the Dp,q-harmonic interpolant determined by its endpoint data. We further derive Hermite–Hadamard-type integral bounds, including an upper bound depending on endpoint values and a lower bound expressed through a generalized midpoint defined by an integral cancellation condition. The framework recovers classical convexity (p ≡ 1, q ≡ 0), covers variable-metric cases (q ≡ 0, p > 0), and yields explicit formulas for the radial Schrödinger model q(t) = ℓ(ℓ + 1)/t2. As an application to musical acoustics, we analyze the transverse mode shape of a clamped string and prove a geometric criterion that excludes the fundamental mode when violated, linking the speaking-length span to bounds on tension and inertial weight.
125202
Junhui Gu, Jiawei Yang, Donglei Chen, Md Al Amin and Shengquan Li
This paper investigates the vibration suppression of an all-clamped plate based on an electromagnetic inertial actuator. A dynamic sliding mode controller combined with a model-assisted extended state observer (DSMC+MAESO) is developed to address strong electromechanical coupling, external disturbances, and nonlinearities of the vibration system. An electromechanical coupling dynamic model is established to capture the intrinsic nonlinearities induced by the inertial actuator’s electromagnetic force called control force. The model-assisted extended state observer (MAESO), employing the experimental setup, is developed to more accurately estimate the system states and total disturbances including strong coupling, nonlinearity and external disturbances, while avoiding bandwidth increase. Considering the influence of total disturbances on the all-clamped plate, a disturbance-compensated dynamic sliding surface is designed by incorporating the disturbance estimation from MAESO. The dynamic sliding mode controller (DSMC) optimizes the control voltage and reduces the high-frequency chattering phenomenon of conventional sliding mode control, thereby protecting the inertial actuator. The experiments are carried out on the basis of the National Instruments Peripheral Component Interconnect Express 6343 (NI PCIe-6343) acquisition card. Experimental results demonstrated that the proposed DSMC+MAESO method significantly suppressed vibration of the all-clamped plate, reducing the amplitude from 15.1 dB to 0.2 dB. This performance clearly outperformed dynamic sliding mode controller combined with an extended state observer (DSMC+ESO) and sliding mode controller combined with an extended state observer(SMC+ESO), confirming the superiority and practical applicability of the proposed method for vibration control in such structures.
125203
Chang Liu, Lin Teng, Yuxi Wang and Xiaoying Zhang
The concept of chaos has been extensively employed in image encryption owing to its intrinsic randomness and sensitivity to initial conditions. In this study, we propose a new two-dimensional hyperchaotic dual sine chaotic system (2D-DSCS), designed to overcome the limitations of the one-dimensional sine chaotic map, including its low dimensionality and limited complexity. The 2D-DSCS is constructed by embedding a sine chaotic map within an infinite collapse map. Compared with other two-dimensional systems, it exhibits higher parameter sensitivity and greater variation in Lyapunov exponents when the initial parameters are altered. Based on the 2D-DSCS, we further design an image encryption algorithm named the Triangle Permutation and Continuous Raster Diffusion Image Encryption Algorithm (TPCRD-IEA). The algorithm employs a hybrid scrambling strategy that integrates local triangular scrambling with random spiral scrambling. Within each local block, triangular sub-blocks are generated and rearranged according to a sorted chaotic sequence, while random spiral scrambling is applied to enhance global pixel permutation. The chaotic sequence determines both the starting point and direction of spiral diffusion, thereby effectively disrupting pixel positions and enhancing algorithmic security.To further strengthen security, a continuous grating-window diffusion mechanism is introduced. A sliding diffusion window is constructed along a raster-scan trajectory, performing diffusion at each position it traverses. Along the diffusion path, most pixels are processed twice through distinct diffusion operations, markedly enhancing resistance to brute-force attacks. The diffusion window is dynamically generated and updated according to the chaotic sequence at each iteration, thereby ensuring high diffusion randomness. Simulation results demonstrate that the proposed encryption algorithm exhibits strong resistance to noise and cropping attacks and achieves a high level of security.
125204
Bharati Bhuyan, Madhusmita Sahoo, Saumya Ranjan Jena and Archana Senapati
This study addresses the numerical soliton solutions of the (2 + 1)-dimensional Chafee–Infante equation. A novel computational framework is proposed by integrating the natural transform with the residual Power series method to achieve accurate and efficient approximation of solution profiles. The effectiveness of the scheme is demonstrated through three representative test problems, with solution behaviors illustrated via 2D and 3D surface plots. Quantitative accuracy is further assessed using the L2 and L∞ error norms, as well as the quadratic and cubic rate of convergence. Rigorous stability and error analysis are conducted to confirm the theoretical robustness of the approach. All simulations are performed in MATHEMATICA and MATLAB under FORMAT LONG precision.This manuscript will be best fit to the numerical solution of (2 + 1)-dimensional Chafee–Infante equation in the field of engineering and physical sciences where analytical solution fails.The wave profile of this equation is well behaved with very small amount of time and experimented through L2 and L∞ error norms.
125205
The following article is Open access
Juan Antonio Sáez, Salvador Mengual and Joan Josep Ferrando
The necessary and sufficient conditions for a type N vacuum solution (with cosmological constant) to admit a group of isometries of dimension r are given in terms of the invariant concomitants of the Weyl tensor. This study requires defining several invariant classes, and for each class, the conditions that determine the dimension are given. Thus, an IDEAL (Intrinsic, Deductive, Explicit and ALgorithmic) characterisation of these spacetimes follows. Some examples show that our algorithmic results can be easily implemented on the xAct Mathematica suite of packages. The relation between our classes and already known families of solutions of Einstein equations is outlined.
125206
José-María Martín-Olalla
The relationship between the vanishing of the heat capacitiesas T → 0+ and the thermal stability is examined. The heat capacities vanish as fast as or faster than T as T → 0+ for states at the phase space boundary (T = 0) to sustain the standard thermal stability criterion Uss > 0. Conversely, weakly vanishing heat capacities, which signify a loss of curvature in U(S) at T = 0, are the signature of a critical condition precisely at T = 0, as exemplified in marginal Fermi liquids. Therefore, the vanishing of the heat capacities should be viewed not as a new law but as a confirmatory result of the existing framework of thermodynamics.
125207
Jianeng Tang, Wenchao Song, Hui Ni, Shuwan Pan and Yinghang Zhao
In recent years, chaotic maps based on discrete memristors have attracted increasing research interest. However, most existing memristive chaotic maps exhibit relatively small Lyapunov exponents, whereas high values are essential for enhancing security applications. In this paper, we propose a novel three-dimensional memristive Hénon map (3D-MHM) by coupling discrete memristors with the classical Hénon map. The proposed system exhibits larger Lyapunov exponents, with the maximum value approaching 9, and a more continuous hyperchaotic range, indicating improved chaotic behavior and richer dynamic features. Furthermore, results from the National Institute of Standards and Technology tests demonstrate that the chaotic sequences generated by the 3D-MHM possess excellent randomness, with the pass rate of each test exceeding 97%. And we construct a hardware platform and successfully implement the attractors generated by the 3D-MHM. Based on the 3D-MHM, we propose a novel encryption algorithm. Experimental results and security analysis show that the encryption algorithm achieves strong performance and high efficiency. The proposed encryption algorithm can get good scores, such as correlation coefficients (<0.009) and information entropy (7.9998).
125208
Xiang Zhou, Guoshuang Shui and Wenbin Zhou
The dynamic response of the magneto-electro-elastic (MEE) half-space under the action of an anti-plane line source and an in-plane electro-magnetic field is investigated. By means of Cagniard-de Hoop (CdH) techniques, one-sided and two-sided Laplace transformations, an explicit analytical solution for the transverse displacement, electric potential, magnetic potential, shear stress, electric displacement, and magnetic induction is obtained. Then, the detailed numerical computations are carried out to characterize the dynamic response of MEE half-space. The results show that the electro-magnetic1 (EM1) waves, electro-magnetic2 (EM2) waves, elastic head (EH) waves and shear elastic (SE) waves exhibit different singularities in various dynamic responses. The contributions of SE wave to the dynamic response of electric potential, magnetic potential, shear stress
, electric displacement, and magnetic induction are the greatest. The EH wave has the greatest contribution to the transient shear stress
, and other waves exhibit negligible impact on the transient phenomena. In addition, the arrival time of the receivers in different areas also varies. Generally, for receivers located at different locations horizontally and vertically, the further the receivers are from the wave source in either the horizontal or vertical direction, the later the waves arrive at them; the delay in the horizontal direction is more obvious.
125209
Pradeesh M and Prakash Mani
This paper aims to discuss the dynamical characteristics of HIV-1 infection through differential equations representing the cell compartments such as target cells (CD4+), infected cells, cytotoxic T-lymphocytes (CTLs) precursors, CTLs effectors, and free-virions along with time delays during viral replication and the effect of antiretroviral therapies (ARTs). Distinct from the existing works on mathematical modelling of HIV-1 infection, this study follows a data-driven modelling approach in terms of identifying the optimal parameters for individual cases rather than population parameters. In detail, data-driven modelling may identify the parameters based on individual patients. Mathematical analysis of infection progress becomes necessary only if there is disease spreading within the host. The basic reproduction number ensures the disease spreads, and this study derives an analytical expression involving the model parameters. Theoretically, steady-state analysis relates to the rate of change in cell populations. A stable steady state implies that the cell populations are in a nominal rate. This paper investigates three types of steady states: infection-free steady state, immune-free steady state, and endemic steady state, using the Routh-Hurwitz stability criterion. The study considers the effect of time delay during infection progression and investigates its properties in terms of theoretical bifurcation conditions, including saddle-node, transcritical, and Hopf-type bifurcations. This paper also formulates an optimal control problem by choosing ART as the control parameter, and the corresponding stability conditions are derived by employing the Hamilton-Lagrangian approach and Pontryagin’s maximum principle. Moreover, numerical simulations are performed to validate the performance of proposed theoretical frameworks with respect to HIV-1 infection.
125210
Chou Walickta Singkai and Utpal Kumar Saha
In this study, we introduce a new modified coupled fractional Korteweg–de Vries system and a generalized time-fractional Hirota-Satsuma coupled KdV system incorporating a generalized Caputo fractional derivative. To obtain approximate solutions, we developed a conformable Laplace-Adomian Decomposition Method (ρ-LADM), which is a modification of the classical Laplace-Adomian approach. The effects of varying the fractional order α and the parameter ρ on the system’s solution behavior were thoroughly investigated to better understand their influence on the system’s dynamics. Numerical solutions are presented graphically to demonstrate the accuracy, reliability, and efficiency of the proposed method.
125211
The following article is Open access
Muhsin Caner Gökçe and Rudolf Saathof
In this study, we examine the propagation characteristics of vortex-Gaussian beams in atmospheric turbulence for uplink free-space optical (FSO) links. Using the extended Huygens–Fresnel principles, we analytically derive key parameters, including the received intensity, second-order and fourth-order intensity moments, the Strehl ratio, the kurtosis parameter, and the effective beam spot radius. Then, we used phase-screen simulations to analyze the behavior of the scintillation index. Our findings demonstrate that vortex beams offer superior Strehl ratio performance compared to the Gaussian beam and exhibit greater resilience to atmospheric turbulence variations. Furthermore, the vortex beams exhibit kurtosis values below 3 and have a larger effective beam spot radius compared to Gaussian beams. Additionally, vortex beams exhibit a lower scintillation index compared to the Gaussian beam at longer propagation distances.
125212
Cuimei Jiang, Yanbo Liu, Fangfang Zhang, Xuejing Gu, Meiying Zhang and Yang Zhao
The nonlinear3of single4has become a focal topic in neuroscience. However, existing circuit models rarely integrate magnetic flux-controlled memristor (MFCM) with biologically plausible double-membrane structures. Consequently, how an external magnetic field influences firing patterns and energy distribution remains poorly understood. To address this issue, we propose a novel neural circuit that couples the MFCM with double capacitive membranes. Applying Kirchhoff’s laws, we first derive two deterministic models for the neural circuit: one without and one with external magnetic field excitation. The Hamilton energy of each configuration is obtained via Helmholtz’s theorem. Subsequently, for the model without external magnetic field excitation, we analyze equilibrium stability and investigate the bifurcation diagrams, Lyapunov exponents, membrane potential and energy calculations of the neuron. The results show that the circuit exhibits spiking, bursting and chaotic modes under various external stimuli. To further explore the relationship between channels, membranes and external energy, we also examine the coherent resonance under different intensities of Gaussian white noise. Finally, for the model with external magnetic field excitation, we investigate the dynamic properties of the model under three types of external stimuli. Our findings reveal that the MFCM channel can detect fluctuations in the external magnetic field and capture energy, leading to significant pattern transformations and energy level alterations.
125213
Kalyanashis Sahoo, Banshidhar Sahoo and Swarup Poria
Non-lethal anti-predator survival strategies like vigilance create a significant impact on the dynamics of predator-prey systems. Cooperative hunting is one of the most crucial behaviors that enhances predators’ survival and growth by capturing their prey with less difficulty. Prey and predators use these strategies according to Darwin’s theory of the struggle for existence to maintain their populations. In this study, we investigate the significant impacts of prey vigilance in a three-species predator–prey model incorporating hunting mechanisms of both intermediate and top predators. Theoretically, we document the conditions of equilibria and the local and global stability of the system. Additionally, we present the mathematical results of the Hopf bifurcation of the model. We enrich our study by performing numerical simulations considering suitable parameter values. Our findings show that excessive vigilance and excessive cooperative hunting are harmful to a species for their survival and growth. Our results indicate the existence of saddle-node, transcritical, Hopf, and period doubling bifurcations in the system. Emergence of codimension 2 bifurcations such as generalized Hopf, zero Hopf, and cusp bifurcations is also exhibited. Through the variation of biologically relevant parameters, we demonstrate the emergence of chaotic dynamics in the model and propose control mechanisms of stable coexistence. The variations of equilibrium densities of the populations in different bi-parametric spaces are also presented to see how vigilance of prey and cooperative hunting of intermediate and top predators affect growth and extinction of the populations. The results and experiences of this study can be applied to wild ecological systems.
125214
Yuman Zhang, Na Wu and Yuxia Li
In the paper, a new memristive chaotic circuit is constructed through the substitution of Chua’s diode with a non-monotonic ideal flux-controlled and active memristor in the frame work of Chua’s circuit. Its nonlinear dynamics, encompassing symmetric three-scroll chaotic attractors, non-symmetric two-scroll chaotic attractors, single-scroll chaotic attractors, periodic cycles, limit cycles, stable sinks, and extreme multistability are investigated and substantiated through the prism of stability analysis, numerical simulations, and energy analyses, incorporating both circuit energy and Hamilton energy. Furthermore, chaos control for the proposed memristive chaotic circuit system is achieved within a fixed time period, independent of the initial conditions, owing to the application of sliding mode control strategy. It is a straightforward implementation process because the sign function is avoided in the design of both the sliding mode surface and the sliding mode controller. The stabilization time for the proposed memristive chaotic circuit system can be predetermined by parameters of the sliding mode surface and the sliding mode controller, and further shorten by adjusting the parameter of the additional term to alleviate the overshoot in the convergence process. Ultimately, all the performances are affirmed through numerical simulations.
125215
Solmaz Zehtabian Rezaei, Yaghoub Mahmoudi and Mahdi Baghmisheh
This study investigates the application of feed-forward artificial neural networks (ANNs) for approximating solutions to integral equations with hypersingular kernels. A set of specialized quadrature formulas is analyzed to accurately and stably handle hypersingular integrals, ensuring precise numerical integration, which is crucial for these challenging equations. An optimization-based training strategy is employed to adjust the ANN’s weights, enabling the network to satisfy the integral equation across selected training points. Leveraging the inherent flexibility of ANNs, the proposed method effectively captures complex nonlinear behaviors and provides a unified framework for solving both linear and nonlinear hypersingular problems. Several numerical experiments are conducted to validate the approach, and the results are compared with the Legendre polynomial approximation method. The comparison demonstrates high accuracy in terms of L2-norm, CPU time, and iteration count, highlighting the potential of ANNs as a robust and versatile tool for solving strongly singular integral equations, offering advantages over traditional numerical methods.
125216
Marco A S Trindade
In this work, we find the Poisson superalgebras related to schemes of quantization. Initially, we consider the Dirac superbracket in the context of the quantization of constrained systems. Next, we show the existence of a Poisson supermanifold in the scenario of quantization deformation. Finally, potential applications of the BRST formalism are outlined.
125217
The following article is Open access
Felipe Taha Sant’Ana and Hui Liu
We study the effects of the two-spinon excitations on the field-field correlator of the Tonks-Girardeau gas. While these excitations have been previously examined in the ground state of the system, their role at finite temperatures remains unexplored. Here, we extend the analysis to the one-dimensional interacting Bose gas at thermal equilibrium, focusing on the one-body correlation function of the infinitely repulsive Lieb-Liniger model. We demonstrate that two-spinon excitations, characterized by two holes within the rapidity distribution, constitute the dominant contribution to the field-field correlator at low temperatures. Furthermore, we analytically show that incorporating additional particle-hole excitations diminishes their contribution, highlighting the efficacy of the two-spinon framework in capturing the essential physics of the system. Numerical evaluations of both the Fredholm determinant and the spectral sum stemming from the two-spinon program, with the addition of particle-hole excitations, reveal convergence at low temperatures.
125218
Haitao Gao, Minghui Ma, Shidong Liang and Jufen Yang
The stability of traffic flow has long been a research focus in transportation. Car-following studies, which simulate the dynamic behavior of vehicles within traffic streams, aim to improve the efficiency and stability of traffic flow, thereby enhancing the overall performance of transportation systems. However, most scholarly research on car-following focuses on straight roads, with studies on curved roads often neglecting the impact of the cross-slope. In real-world traffic, curved road scenarios are an indispensable component, and the common alignments connecting modern expressways to ramps, which are composed of straight segments, transition curves (clothoids), and circular curves, pose even greater challenges to car-following behavior due to their complex dynamic characteristics and spatial limitations. This paper aims to develop a curve car-following model applicable to these distinct road geometries (straight roads, transition curves, and circular curves) by comprehensively incorporating factors such as curve radius, superelevation angle, maximum speed decision-making, and a dynamic look-ahead mechanism. Furthermore, the study investigates the influence of varying curve parameters on vehicle car-following dynamics. The proposed model’s effectiveness is validated through simulation experiments. A sensitivity analysis is also performed on key parameters, including superelevation angle, friction coefficient, and look-ahead coefficients. The results indicate that this model exhibits enhanced stability and safety in curved road environments and can adaptively manage the transition from straight segments to curves. This research contributes to the optimization of curve design, enhancing the stability and traffic efficiency of vehicular flow in curved road segments.
125219
Yu-jie Geng, Jing-yu Sun, Cheng-ye Zou, Peng-fei Yan and Hao Zhang
With the rapid growth of digital image data and the increasing demand for transmission, achieving efficient image compression while ensuring data security has become a critical issue in modern information processing. Traditional image compression and encryption algorithms suffer from low processing efficiency and poor adaptability to large-scale data. To address these challenges, this paper designs a parallel image compression and encryption algorithm based on a four-dimensional non-equilibrium multi-wing hyperchaotic system (4D-NEMHCS) and the lifting wavelet transform (LWT) to simultaneously enhance algorithm performance and security. In the compression stage, the low-frequency components of the image are losslessly compressed in parallel after LWT, while the high-frequency components are lossily compressed in parallel. To further ensure security, a High–Low bit scrambling algorithm and S-box substitution are applied to the compressed low-frequency data, and XOR operation is used to encrypt the high-frequency components. In the algorithm design, 12 threads are utilized to deal with the frequency coefficients through LWT parallelly to accelerate the speed of image processing. What’s more, the 4D-NEMHCS and LWT algorithm are implemented on FPGA to make algorithm efficiency. At last, the compression and encryption algorithm are proved in the experiment and results show that the image can be compressed up to 44% and the speedup ratio of the algorithm is improved to 2.79x.
125220
Daming Yuan, Zhanheng Chen and Zhen Huang
The neutron transport equation plays a critical role in modeling radiation transport phenomena; however, its high dimensionality and inherent complexity pose significant computational challenges. Traditional numerical methods often depend on structured meshes, which can limit their flexibility and efficiency, particularly in complex geometries. In contrast, meshless methods, such as the radial basis function (RBF) method, offer enhanced adaptability, accuracy, and computational efficiency. This paper presents a meshless approach that combines RBF interpolation with finite-difference techniques (RBF-FD) to solve the two-dimensional steady-state, one-group, isotropic neutron transport equation. The proposed method employs RBFs as local interpolation bases to approximate spatial derivatives on scattered nodes, eliminating the need for predefined meshes. This flexibility facilitates rapid node generation and is particularly advantageous in handling intricate domains. Two types of RBF are utilized to construct local stencils, the differentiation weights being computed accordingly. Numerical experiments are conducted to evaluate the performance of the method. The results demonstrate that the RBF-FD approach accurately and efficiently solves the neutron transport equation, even in geometrically complex settings. By integrating the strengths of meshless RBF interpolation with the simplicity of finite-difference schemes, the proposed method offers a robust and scalable solution framework for radiation transport problems, overcoming many limitations of traditional mesh-based techniques.
125221
Yu Wang, Zhipeng Huang, Dan Zou, Jianqiang Wang, Genqiang Peng and Hongtao Li
Virtual coupling technology plays a significant role in enhancing the flexibility of train operation and improving transportation efficiency. By enabling real-time communication between trains, this technology allows for dynamic coupling and decoupling of train units, thereby overcoming the limitations of traditional mechanical couplers and significantly reducing the required safety headway during train operation. However, research on the operational characteristics of heavy-haul trains under virtual coupling technology remains limited, and relevant theories and simulation methods require further in-depth investigation. This study, based on cellular automata theory, develops a simulation model for the operation of heavy-haul train platoons under virtual coupling technology. First, by analyzing the braking processes of the leading and following trains within a group under the most extreme braking scenarios, a minimum safety headway model was established for both intra-platoon and inter-platoon virtual coupled train platoons. Second, a fixed equipment model comprising line sections and stations and a mobile equipment model describing train dynamics are constructed, along with state update rules for train platoons. Finally, simulations are conducted to compare key performance indicators-such as displacement, speed, and carrying capacity-between virtual coupling and moving block signaling systems. Using the Datong-Qinhuangdao Railway as a case study, simulation results demonstrate that the application of virtual coupling technology to operate heavy-haul train platoons can significantly increase the travel speed and carrying capacity of trains, while effectively reducing train delays in both frequency and duration.
125222
Taizhen Luan, Wenpeng Dai and Mingen Guo
Designing novel dynamical systems with specific properties can assist scientists in modeling natural and engineered phenomena and studying them with enhanced tools. The intricate relationship between chaos, attractor properties, and system equations remains a focal point, driving further research and breakthroughs in understanding complex dynamical systems. This work presents a novel two-dimensional mega-stable circulant system with hidden attractors that exhibits cyclic symmetry in its equations. The system has an infinite number of coexisting attractors, none of which include equilibria in their basins, and are therefore hidden. The system exhibits limit cycles, tori, or chaotic attractors when a periodic forcing term with amplitude
and frequency
is added. Bifurcation diagrams, Lyapunov exponents, and the Kaplan-Yorke dimension are used to analyze the attractors’ phase space behavior and the stability of fixed points. Low
yields non-chaotic toroidal behavior, while increasing
leads to periodic or chaotic oscillations. Periodic dynamics dominate for large
and
. The experimental results obtained from circuit implementation validate the theoretical findings and highlights its potential applications in secure communication and signal processing.
125223
Jagdish Prasad Maurya, Shruti and Sanjay Kumar Pandey
The article presents a generalised three-dimensional analytical model of tornado-like atmospheric vortices by duly considering viscous terms of the governing equations. The analysis is based on the radial inflow given by Zhang et al (2023) Phys. Fluid35 065133 and restorying some terms dropped by them in the governing equations. As a consequence, the azimuthal velocity is observed to be effective only within a finite region, unlike decaying asymptotically in the analytic models available in the literature, which conforms the fact that tornadoes have a thin width compared with the height. The other velocity components and pressure are derived analytically and are plotted to study their dynamics. The peak in the vertical velocity increases with height, but stabilises at higher altitudes. Further, the maximum azimuthal velocity increases with height and decreases with increasing aspect ratio (ratio of radius and height of maximum radial velocity). Besides, the width of the rotating wind increases with height, indicating that the vortex widens with altitude, giving it a funnel shape. The pressure deficit is maximum near the vortex axis but tends to zero as one moves away from the vortex axis. The maximum pressure deficit is also observed to significantly increase with height and decrease with an increase in the aspect ratio.
125224
Livija Cveticanin and Miodrag Zukovic
In this paper, the generalized Mathews-Lakshmanan (GML) oscillator is analyzed. The GML represents a truly nonlinear oscillator (TNO) with position-dependent mass (PDM), where the mass function follows a generalized Lorentzian profile whose order corresponds to the power-law exponent of the TNO. The resulting model is a strongly nonlinear differential equation of integer or fractal order that admits a first integral. The corresponding phase portraits consist of closed, elliptic-type orbits, indicating stable periodic motion. An exact analytical solution is derived in terms of the periodic Ateb function, similar to the solution for conventional TNO systems. The vibration amplitude remains constant, while the period depends on the initial amplitude, the order of nonlinearity, and the mass variation parameter. The study confirms that the GML system behaves as a truly nonlinear-like oscillator.
125225
Sumanta Kumar Parida, Abhijit Sutradhar and Dipanwita Deb
The present study develops a mathematical model for electroosmotic blood flow through a sinusoidally wavy microvessel under the influence of an externally applied electric field. The blood is modeled as a non-Newtonian Casson fluid flowing within a microchannel, where the negatively charged glycocalyx layer at the inner wall induces the formation of an electric double layer (EDL). The resulting electric potential distribution is governed by the Poisson-Boltzmann equation, which is linearized using the Debye-Hückel approximation. By invoking the assumptions of long wavelength and low Reynolds number, the governing equations are simplified and solved analytically. The analysis demonstrates that the Helmholtz-Smoluchowski velocity plays a significant role in enhancing the flow. In contrast, the yield stress acts as a suppressive factor, consistent with the governing principles of biophysics and electrokinetics. The novelty of this work lies in the inclusion of ionic energy effects, which significantly augment the axial velocity and volumetric flux. The outcomes of this study provide valuable insights for the design and optimization of biomedical microdevices, such as lab-on-a-chip systems, for diagnostic and therapeutic applications.
125226
Nan Zhang and Shijie Zheng
In this paper, the free vibration and buckling analysis of functionally graded graphene platelets-reinforced (FG-GPLRCs) composite simply-supported(SS) curved beams sandwiched with piezoelectric layers are investigated. For the first time, this research examines how the piezoelectric and flexoelectric effect affects the performance of FG-GPLRCs composite SS curved beams. The rule of mixture and the Halpin-Tsai micromechanical model are utilized to ascertain the composite layer’s effective material qualities. By using Navier’s method, the governing differential equations are transformed into algebraic equations. Finally, this paper thoroughly examines the effects of various parameters on the stability and free vibration of FG-GPLRCs curved SS beams sandwiched with piezoelectric layers. These parameters include opening angle of the curved beam, GPLs distribution patterns, GPLs weight fractions, piezoelectric and the flexoelectric effect. Simulations demonstrate that the flexoelectricity exhibits a stiffness-hardening mechanism.
125227
Jatin Soni and Kuntal Bhattacharjee
Fossil fuel-based power plants are major contributors to greenhouse gas emissions within the power sector. To improve both the cost-effectiveness and environmental sustainability of electricity generation, this study presents a multi-objective Economic Emission Load Dispatch (EELD) model that integrates renewable energy sources (RES), such as wind and solar plants, and plug-in electric vehicles (PEVs). The proposed model incorporates realistic, nonlinear constraints to enhance system reliability, including the arrival, departure, and waiting times of PEVs, as well as the underestimation and overestimation costs associated with RES generation. A Sine Cosine algorithm (SCA) is employed to address the multi-objective optimization problem, offering solutions from various operational perspectives. The model’s performance is evaluated using four test cases involving systems with ten and twenty thermal power plants with RES and PEVs. Comparative analysis with existing state-of-the-art methods demonstrates the proposed approach’s superior accuracy, computational efficiency, and ability to handle complex system dynamics and uncertainties.
125228
Tiantian Chen, Hulin Huang, Yulong Chen and Chunyan Wang
To investigate the effects of multiple lateral jets on the aerodynamic characteristics of a hypersonic vehicle, a numerical simulation of the interference flow field caused by the multiple lateral jets of the vehicle was carried out. The effects of jet pressure ratio (R = 20, 30, 50, 80), flight altitude (H = 20 km, 30 km, 35 km, 40 km), freestream Mach number (Ma∞ = 5, 8) and angle of attack (α = −10°, −5°, 0°, 5°, 10°) on the aerodynamic characteristics of a hypersonic vehicle with multiple lateral jets were analysed, and the corresponding flow mechanisms were also revealed. By comprehensively considering the wall pressure coefficient (Cp) distribution and the extent of the high-pressure zones and low-pressure zones, the force amplification coefficient (KF) and moment amplification coefficient (KM) were employed to effectively evaluate the interference effects of the multiple lateral jets. The results show that KF first increases and then decreases with R, whereas KM decreases with R, and the most favourable aerodynamic effect from the interference flow field of the multiple lateral jets occurs at R = 50. As the flight altitude increases, the amplification coefficients for the multiple lateral jets decrease. With increasing freestream Mach number, both KF and KM increase. The variations in the angle of attack have obvious impacts on the aerodynamic characteristics under the multiple lateral jets. As the angle of attack grows, KF rises, whereas KM declines. Furthermore, under the conditions of the multiple lateral jets, only the first jet exhibits strong direct interaction with the freestream, while the subsequent jets are all located within the flow field disturbed by the first jet.
125229
Li Chen and Taiyan Jing
This study addresses practical fixed-time synchronization (PFTS) in complex networks (CNs) using an improved intermittent control strategy. First, a novel stability criterion is established within the intermittent control framework, which relaxes the synchronization requirements while maintaining fixed-time convergence. Second, the proposed aperiodically intermittent control (AIC) incorporates an average control rate (ACR), significantly relaxing the traditional constraints on the control activation and dormant periods. Moreover, an aperiodically intermittent event-triggered control (AIETC) scheme is designed. This scheme employs smooth hyperbolic sine functions to eliminate control chattering and ensures a minimum interval between triggering events, thereby rigorously excluding the Zeno phenomenon. Third, by integrating Lyapunov stability theory with the AIETC scheme, sufficient conditions for synchronization are derived. Finally, numerical simulations are presented to validate the theoretical results and demonstrate the effectiveness of the proposed method.
125230
A E Bernardini
Quantifiers of stationarity, classicality, purity and vorticity are derived from phase-space differential geometrical structures within the Weyl-Wigner framework, after which they are related to the hyperbolic stability of classical and quantum-modified Hamiltonian (non-linear) equations of motion. By examining the equilibrium regime produced by such an autonomous system of ordinary differential equations, a correspondence between Wigner flow properties and hyperbolic stability boundaries in the phase-space is identified. Explicit analytical expressions for equilibrium-stability parameters are obtained for quantum Gaussian ensembles, wherein information quantifiers driven by Wigner currents are identified. Illustrated by an application to a Harper-like system, the results provide a self-contained analysis for identifying the influence of quantum fluctuations associated to the emergence of phase-space vorticity in order to quantify equilibrium and stability properties of Hamiltonian non-linear dynamics.
125231
Gang Zhang, Zihan Cao and Jiachen Hou
This paper proposes a novel bearing fault signal detection method that integrates Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and a two-dimensional linearly coupled piecewise unsaturated tri-stable stochastic resonance (LCPUTSR) system. First, a piecewise unsaturated tri-stable stochastic resonance (PUTSR) model is designed to overcome the output saturation limitations of conventional stochastic resonance systems. Subsequently, a linear coupling mechanism is introduced to construct the LCPUTSR system. Based on adiabatic approximation theory, the equivalent potential function, stationary probability density (SPD), mean first-passage time (MFPT), and spectral amplification factor (SA) of the system are analytically derived, and the influence of key parameters on system performance is systematically analyzed. Numerical simulations are then conducted to compare the response characteristics of the classical tri-stable stochastic resonance (CTSR), PUTSR, and LCPUTSR models. The results demonstrate that the LCPUTSR system exhibits superior performance in both spectral amplification and signal-to-noise ratio improvement (SNRI). Furthermore, the QGA-optimized LCPUTSR model, validated on the Paderborn and Case Western Reserve University (CWRU) bearing datasets, shows enhanced performance compared with the other two systems. The final QGA–CEEMDAN–LCPUTSR framework further improves the SNRI, confirming the proposed method’s remarkable engineering applicability and superiority.
125232
Xuncai Zhang, Yanhui Liu, Danlei Guo and Ying Niu
To address the security vulnerabilities encountered during the transmission of image data in Internet of Things (IoT) devices, this study introduces a novel encryption framework that integrates an enhanced four-dimensional hyperchaotic system with adaptive DNA coding. The proposed chaotic model is developed by augmenting the traditional Chen system with nonlinear feedback and coupling terms, resulting in improved dynamic behavior, which is validated via phase portraits, bifurcation diagrams, and NIST randomness assessments. A hybrid key initialization mechanism, driven by the SHA-256 hash of the plaintext image and external parameters, enables image-dependent key generation. A fourth-order Latin square is utilized to construct a dynamic DNA substitution matrix, while chaotic sequences guide the scrambling and cross-segmentation operations. Furthermore, a DNA-based XOR logic combined with bidirectional weighted diffusion enhances the confusion and diffusion strength of the encrypted image. Experimental evaluation indicates that the information entropy of the ciphertext image is 7.9993, while the Number of Pixels Change Rate (NPCR) and Unified Average Changing Intensity (UACI) reach 99.61% and 33.46% respectively. All test indicators demonstrate excellent performance, which proves that the encryption algorithm has high robustness and is applicable to the image encryption module for secure image transmission in the Internet of Things (IoT) environment.
125233
Igor V Ovchinnikov
It was recently established that the formalism of the generalized transfer operator (GTO) of dynamical systems (DS) theory, applied to stochastic differential equations (SDEs) of arbitrary form, belongs to the family of cohomological topological field theories (TFT)—a class of models at the intersection of algebraic topology and high-energy physics. This interdisciplinary approach, which can be called the supersymmetric theory of stochastic dynamics (STS), can be seen as an algebraic dual to the traditional set-theoretic framework of the DS theory, with its algebraic structure enabling the extension of some DS theory concepts to stochastic dynamics. Moreover, it reveals the presence of a topological supersymmetry (TS) in the GTOs of all SDEs. It also shows that among the various definitions of chaos, positive ‘pressure’, defined as the logarithm of the GTO spectral radius, stands out as particularly meaningful from a physical perspective, as it corresponds to the spontaneous breakdown of TS on the TFT side. Moreover, via the Goldstone theorem, this definition has a potential to provide the long-sought explanation for the experimental signature of chaotic dynamics known as 1/f noise. Additionally, STS clarifies that among the various existing interpretations of SDEs, only the Stratonovich interpretation yields evolution operators that match the corresponding GTOs and, consequently, have a clear-cut mathematical meaning. Here, we discuss these and other aspects of STS from both the DS theory and TFT perspectives, focusing on links between these two fields and providing mathematical concepts with physical interpretations that may be useful in some contexts.
125234
Kirandeep Kaur and Sachin Sharma
This manuscript investigates three well-known nonlinear boundary value problems, namely the Bratu, Lane-Emden and Troesch equations, which frequently arise in mathematical physics and electrodynamics. These equations are notable for their nonlinear and, in some cases, singular nature, making their numerical treatment particularly challenging. To address these difficulties, we propose a trigonometric spline-based scheme formulated on a uniform mesh. The method employs spline approximations at half-step grid points and is capable of handling the singularities in Lane–Emden problems without requiring any special modifications. A detailed convergence analysis establishes the scheme’s fourth-order accuracy. The study further validates this result through a set of benchmark examples, demonstrating the accuracy and efficiency of the proposed approach. By comparing the outcomes with those available in the literature, we substantiate the superiority of the present method as a reliable tool for solving nonlinear singular problems of this type.
125235
M’hamed Hadj Moussa
This work investigates analytical solutions of the Schrödinger equation within the framework of the displacement-operator formalism. Three distinct potential models are considered: a hybrid potential combining the Cornell and pseudo-harmonic forms, V1(x); the pseudo-harmonic potential, V2(x); and the squared Cornell potential, V3(x). The proposed approach enables the derivation of expressions for both the energy spectrum, En, and the corresponding wave functions, ϕ. In each case, the solutions for ϕ are expressed in terms of the confluent Heun function, specifically
. Furthermore, we present graphical illustrations of the positive energy spectrum,
, accompanied by a detailed discussion of their physical implications. Finally, the thermodynamic properties associated with these potential models are analyzed and interpreted, highlighting their relevance to various quantum systems.
125236
Yogita and Neeru Adlakha
With over 700 million cases and 6.8 million deaths worldwide by September 2023, the COVID-19 pandemic had significant adverse effects on both public health and the global economy. Research shows that the virus disproportionately affects people with pre-existing medical issues. Therefore, it is essential to comprehend the COVID-19 transmission kinetics. A gender-specific mathematical framework validated with COVID-19 data from India is presented in this research. Male and female basic reproduction numbers are calculated independently, demonstrating their impact on equilibrium point stability. To better depict the dynamics of the disease, numerical simulations are conducted utilizing the Non-Standard Finite Difference (NSFD) scheme. Sensitivity analysis emphasizes even more how important comorbidity-related factors are, that impact the progression of the dynamics. The study also examines the ratios of death, recovery, and transmission rates for males and females, as well as the levels of antagonism and synergy in mortality, recovery rates and basic reproduction ratios across genders. In order to measure how comorbidities and disease outcomes interact, the study presents a novel gender-based synergy score. The findings highlight important gender-specific vulnerabilities by demonstrating a higher level of synergy in female recovery and transmission as well as male mortality (3 versus 2.5). The findings support tailored interventions, particularly for high-risk populations with comorbidities, and highlight the importance of the butterfly effect in the context of control efforts.
125237
Jingwen Zhang, Wenjie Zuo, Yuxun Zhu, Yiyin Mei and Zhengdi Zhang
This paper aims to investigate the sliding bursting oscillations and the associated dynamical mechanisms in a nonlinear system with frequency switching. Based on the Rayleigh system, a slow-fast dynamical system that incorporates frequency switching is built by treating the excitation term as a slowly varying parameter. By designating the slow variable as the bifurcation parameter, equilibrium branches as well as the bifurcations are investigated. Six oscillation patterns are observed within distinct threshold windows when the frequency switching threshold is taken as the control parameter, including sliding bursting oscillations with two/four/six spiking as well as traditional bursting oscillations. Through a superposition of the equilibrium branches and transformed phase portraits, the underlying mechanisms of these oscillations are explored. Our study indicates that the introduction of frequency switching serves as a primary mechanism for generating the sliding oscillations. Specifically, the modification of frequency switching threshold significantly influences the transition behaviors of system’s trajectory between different equilibrium branches, giving rise to different oscillation modes.
125238
Jing Li, Chengqiang Yang, Tongwen Jiang, Peng Wang, Huiyuan Li, Yanchao Xu and Qinghong Wang
Carbonate reservoirs exhibit complex oil-water two-phase flow behavior owing to their multimodal pore-throat structures, strong heterogeneity, and variable wettability. Traditional Darcy-based models struggle to capture key pore-scale phenomena such as interfacial dynamics and topological evolution, hindering the accurate prediction of displacement processes. In this study, Well A of the Fuman Oilfield in the Tarim Basin was selected as the research target. A high-resolution pore-scale simulation framework was developed by coupling the multi-relaxation-time lattice Boltzmann method (MRT-LBM) with a phase-field model and digital core reconstruction. The effects of interfacial tension, wettability, oil-water viscosity ratio, and capillary number on the displacement efficiency and oil-phase topology evolution were systematically investigated. The results show that interfacial tension strongly regulates droplet breakup and migration. At σ = 0.005 N m−1, the connected oil volume decreases by 55.4% and isolated droplets increase by 220%, accompanied by a marked increase in the Euler characteristic number, indicating rapid connectivity loss. At σ = 0.01 N m−1, the breakup and mobility are balanced (72%), with the largest decrease in the isolated-droplet Euler characteristic number, reflecting the highest mobilization capacity. At σ = 0.02 N m−1, capillary trapping dominates (68%). Wettability governs droplet adhesion and detachment: hydrophilic (θ = 60°) rapidly forms a water film that cuts the oil phase, increasing the Euler characteristic number significantly (75% recovery), whereas neutral and oil-wet conditions preserve connectivity but retain more residual oil (65% and 55%, respectively). A low viscosity ratio (M = 2) stabilizes the front and enhances the breakup, yielding a large Euler characteristic number growth (72%), whereas a high ratio (M = 10) shows minimal topological change and only 64% recovery. Increasing the capillary number promotes droplet detachment and migration, with high Capillary number (Ca) producing the lowest isolated oil volume peak and largest Euler characteristic number drop, achieving 72% recovery.
125239
Liang’an Huo and Ya Lu
During epidemics, individuals exhibit diverse attitudes toward epidemic risks, which significantly influence their decision-making regarding disease prevention and control, particularly in information acquisition and medical resource allocation. These individual decisions collectively shape the overall effectiveness of epidemic containment strategies. In this paper, we propose a coupled information-disease transmission model that integrates the acquisition and allocation mechanisms of information and medical resources, explicitly accounting for individual risk attitudes. Specifically, the upper layer describes information dissemination using the
model, while the lower layer captures epidemic spread through the
model. Based on the microscopic Markov Chain Approach (MMCA), we analytically derive the outbreak threshold of the proposed model. Through extensive Monte Carlo (MC) simulations, we obtain the following conclusions: a higher proportion of risk-emphasizing individuals leads to a smaller final infection size. Furthermore, rational medical resource allocation—such as redistributing surplus resources to neighbors while maintaining individual safety—can markedly reduce infections and enhance epidemic control. Additionally, increasing the utilization efficiency of medical resources has a more direct impact on epidemic control than improving the access to information resources. Nevertheless, simultaneous optimization of both resources significantly reduces infection rates and maximizes the overall efficiency of epidemic prevention, achieving the most favorable public health outcomes.
125240
H F Kisoglu
This paper investigates the non-relativistic energy eigenvalues of a quantum mechanical system described by a hyperbolic potential function which forms a modified double-well potential. In the literature, the eigenfunctions (wavefunctions) and the eigenvalues of such a system have been partly revealed analytically for a particular regime of the potential parameters by use of Confluent Heun equation. Furthermore, because of the limited asymptotic knowledge of Confluent Heun Functions, a Wronskian method has been employed for numerically achieving the eigenvalues of higher energy levels. As for this study, Asymptotic Iteration Method is utilized for obtaining the energy spectrum of this system in a closed form. By favour of usage of the method in the quasi-exactly solvable systems, it is allowed to obtain an analytical expression for the energy eigenvalues, for a parameter regime in which the potential parameters are not equal to zero. As a result, it will be possible to examine how each potential parameter independently affects the energy spectrum.
125241
Carlos Escudero and Helder Rojas
Interpreting the noise in a stochastic differential equation, in particular the Itô versus Strato-novich dilemma, is a problem that has generated a lot of debate in the physical literature. In the last decades, a third interpretation of noise, given by the so-called Hänggi–Klimontovich integral, has been proposed as better adapted to describe certain physical systems, particularly in statistical mechanics. Herein, we introduce this integral in a precise mathematical manner and analyze its properties, signaling those that have made it appealing within the realm of physics. Subsequently, we employ this integral to model some statistical mechanical systems, such as the random dispersal of Langevin particles and the relativistic Brownian motion. We show that, for these classical examples, the Hänggi–Klimontovich integral is worse adapted than the Itô integral and even the Stratonovich one.
125242
Bhawna Aggarwal, Shireesh Kumar Rai, Akshay Rana and Kushal Kumar
A compact emulator for the recently proposed memtranstor − the mem-element that couples electric charge (q) to magnetic flux (ψ) via nonlinear magnetic behaviour is presented. The paper details a systematic design methodology for the emulator, provides a mathematical analysis establishing its memtranstance characteristics, and validates the design through circuit-level simulations. The emulator is realized using a voltage differencing transconductance amplifier (VDTA) followed by a voltage differencing current conveyor (VDCC). The magnetic flux which is proportional to the input voltage is produced by forcing a proportional current through a capacitor via the VDTA. This flux is then converted into charge proportional to the input current using the VDCC. Mathematical derivations are carried out to demonstrate the nonlinear q - ψ relation and thereby confirm the memtranstance behavior. The topology, implemented with three capacitors, one resistor, and a minimal set of active blocks, reproduces positive and negative pinched-hysteresis loops. A limited range of the constant term in the memtranstor expression, however, was identified, which constrains the generation of butterfly-shaped pinched hysteresis loop (PHL). To address this limitation, second emulator variant incorporating a resistive network is proposed; which affords full control over the constant term and enables systematic generation of diverse butterfly PHL shapes. The designs were validated using LTspice simulations with TSMC 0.18 μm CMOS models and subjected to Monte Carlo analysis to assess sensitivity to process and device variations. The custom layout of the proposed memtranstor emulator has also been presented in 0.18 μm CMOS technology. Practical utility is demonstrated via two applications namely a chaotic oscillator and an artificial synapse indicating suitability for neuromorphic systems. The memtranstor-based chaotic circuit is rigorously analyzed through the computation of Lyapunov exponents, bifurcation diagrams, the Kaplan–Yorke dimension, stability evaluation, and complex dynamical behavior assessment using both NIST randomness and the 0–1 tests.
125243
The following article is Open access
Yong-Nam An, Myong-Song Ri, Kyong-Chol Choe, Yong-Il Yun, Univan Ahn and Hyok-Chol Ryu
The aim of this paper is to find a method for tracking the resonance frequency of an ultrasonic transducer driven by a phase-shift PWM inverter operating in a ‘phase-shift+operating frequency control’ scheme, as well as to overcome the drawback of IZL(Integration Zero Loop) where optimal frequency tracking is impossible when the phase-shift PWM inverter outputs the maximum power. The minimum admittance tracking system(MATS) proposed in this paper consists of a matching circuit with parameters determined by MATLAB simulation and performs experiments with the desired power to determine the LF so that the phase-shift PWM inverter operates in a stable operating state where shock currents are not generated by a small increase in the parameter LF of the L-C matching circuit. The MATS, which is the optimal frequency tracking method we proposed, overcame the drawback of IZL, where the optimal frequency tracking was not possible when the phase-shift PWM inverter outputs the maximum power. Moreover, it prevents the generation of shock currents that occurred on the right-branch of the inverter even when power control is performed at the resonant frequency of the load and allows the inverter to operate in a steady state.
125244
Wenjie Li, Guodong Li, Jingxu Zhang and Xiangkun Chen
Multi-scroll chaotic systems hold significant application value in information security, secure communications, cryptography, and related fields. Given the limitations of traditional chaotic attractors in terms of dimensionality and scroll count, this research develops an original methodology to generate multi-scroll chaotic attractors in multiple dimensions. In different engineering situations, the purpose is to make the implementation of these systems more widely used. Based on a classical double-scroll chaotic system, we designed a new nonlinear function that extends the system to three dimensions with multi-scroll generation. Through parameter tuning, scroll counts across dimensions can be modified without introducing additional nonlinear functions, reducing attractor generation complexity. During the research, we analyzed the relationship between equilibrium point distribution and parameter settings. The Lyapunov exponent analysis yielded a positive value for the largest exponent, thereby confirming the system’s operation in a chaotic regime. Further detailed examination of attractor phase portraits, system dissipativity, and bifurcation diagrams comprehensively characterized the system’s dynamic properties. Finally, digital signal processor (DSP) implementations and circuit realization results demonstrated high consistency with numerical simulations, validating system design efficacy and revealing substantial potential for theoretical research and engineering applications.
125245
A N Nirmala and Kumbinarasaiah S
125246
Shuang Hou and Chuanjing Song
Conserved quantity is one of the core topics in analytical mechanics. Identifying such quantities in a system not only reduces the number of degrees of freedom, thereby simplifying the dynamical description, but also reveals the invariant laws that the system follows in the complex evolution process. In traditional dynamics, classifying system evolution as continuous or discrete serves as the foundation for building effective models and selecting appropriate mathematical tools. The time-scale theory, however, offers a unified framework for describing both types of systems. This approach not only avoids redundant derivations for each case but also reveals the profound structural connections between continuous and discrete dynamics. Consequently, exploring conserved quantities within the time-scale framework has emerged as a significant and valuable research direction. Unlike previous studies limited to Lagrangian system, this work establishes Hojman-type conserved quantities for time-scale nonshifted systems under both the Birkhoffian framework (including generalized and constrained Birkhoffian systems) and the Hamiltonian framework (covering both holonomic and nonholonomic cases). This study introduces, for the first time, a unified formulation for Lie symmetry and Hojman-type conserved quantity, with its application to both frameworks presented separately. All theoretical results are rigorously derived and supported by numerical simulations.
125247
Murat Sari and Zeinab Hassanzadeh
This paper presents a rigorously constructed Markov Chain Monte Carlo method designed to efficiently solve initial value problems arising in complex physical modelling problems, where the system dynamics are characterized by time-dependent and potentially uncertain parameters. This approach leverages optimized transition probabilities within the Monte Carlo scheme to enhance the robustness, accuracy, and computational efficiency of convergence; it is particularly advantageous for addressing problems that exhibit periodic or structured solutions. The structural potential of this method enables parallelization, making it well-suited for large-scale data processing and computationally intensive environments, such as those encountered in big-data analytics and parallel supercomputing systems. Numerical results, including applications to systems with variable coefficients and matrix structures characteristic of physical models, demonstrate the superior performance of the proposed stochastic approach over conventional deterministic methods—particularly the two-stage waveform relaxation method—thereby offering new avenues for simulating and analyzing complex physical phenomena with enhanced scalability and reliability.
125248
Borel Dilane Banmene Lontsi, Justin Roger Mboupda Pone and Gabin Jeatsa Kitio
In this work, a secure second-order discrete time delta sigma (ΔΣM) modulator is used to securely modulate two physiological signals for e-health applications. The chaotic system used is a new 3D chaotic system that is used to generate random keys for encryption. Quintic nonlinearity is integrated into the existing Sprott chaotic system and then studied via nonlinear dynamics tools, which reveal complex dynamics, including the coexistence of three distinct chaotic attractors and the phenomenon of intermittency. A microcontroller implementation of the system is performed to demonstrate its real-life applicability. The bits generated from the chaotic regime of the proposed oscillator are tested successfully via the NIST-800.22 test. The pseudo random bit streams generated from the chaoticity of the oscillator using the system parameters and initial conditions as secret keys are used in a 2-stage confusion process to encrypt two physiological signals. At the receiving end, the physiological signals are successfully recovered, and some standard metrics, such as key space analysis, key sensitivity, and cross-correlation, are applied to verify the strength of the encryption scheme. A comparison with recent and good standing contributions in the literature is also provide at the end of this work, which shows that the proposed scheme is robust against common attacks. The results obtained in this study open the possibility of applying chaos in digital communication systems for the conception of secure e-health services.
125249
Fumio Hiroshima and Noriaki Teranishi
Particles, fields and nuclear physics
125301
Mirac Kamislioglu, Dogu Kupeli, Bulent Buyuk and Ismail Kocak
In this study, novel homogeneous and flexible tungsten-embedded silicone rubber samples were developed and tested as radiation shielding materials for diagnostic x-ray applications. Up to 83 wt% tungsten was incorporated into RTV-2 silicone rubber while maintaining flexibility. X-ray transmission experiments were conducted under narrow beam geometry conditions specified by the International Electrotechnical Commission (IEC) 61331-1:2014 standard. The samples’ radiation attenuation ratios (RARs) were evaluated for tube voltages ranging from 50 kV to 110 kV in 10 kV increments. Among the tested samples, the composition with 83 wt% tungsten exhibited the highest radiation attenuation capability for all applied tube voltages. The samples’ lead equivalent thickness (PbE) values were determined for the same voltage range. PbE values of 83 wt% tungsten-embedded silicone rubber increased with the increasing applied tube voltages from 50 kV to 80 kV which is explained by K-edge of tungsten. There was a local remarkable decrease at 90 kV which K-edge of lead was taken place. Finally, PbE values of 0.25 mm, 0.35 mm, 0.5 mm, and 1 mm for 83 wt% tungsten-embedded silicone rubber were identified for the 50–110 kV range, as outlined in the third clause of the IEC 61331–3:2014 standard. A 2.1 mm thick 83 wt% tungsten-embedded silicone rubber sample was found to be equivalent to 0.5 mm PbE within the studied voltage range. In conclusion, this study comprehensively evaluates the preparation and characterization of tungsten-embedded silicone rubber materials for diagnostic x-ray applications.
125302
Dan Han, Hanxun Liu, Dongping Yang, Rongxing Cao, Yuanyuan Xue, Chengan Wan, Xuelin Yang, Xiao Chen, Weixiang Zhou and Yuxiong Xue
This study investigates the effect of temperature on leakage current degradation in p-GaN gate high electron mobility transistors (HEMTs) under heavy ion irradiation. Experimental results show that Kr ion irradiation at room temperature significantly increases drain leakage current, primarily along the source-drain path. The device undergoes electrical degradation, with a 5.2% positive shift of VTH and a 26.5% reduction of output current. At higher temperatures (350 K–400 K), the distribution of leakage path remains in different regions of gate-to-drain. Hole accumulation beneath the gate increases the electric field in the p-GaN layer, raising the risk of single-event gate rupture and single-event burnout. Utilizing TCAD simulation, the temperature effect on the leakage path distribution can be attributed to the temperature-related electric field, lattice temperature, and carrier thermal excitation and tunneling. These findings provide theoretical insights for understanding the single-event leakage current characteristics of p-GaN gate HEMTs in space radiation environments.
125303
Murat Dag and Abdullah Aydin
Nuclear data underpin a comprehensive understanding of nuclear processes. Fission cross section data are in particular essential for various nuclear applications, especially energy generation, waste transmutation, and radiation shielding. In this study, proton-induced fission cross sections were calculated for selected actinide and sub-actinide isotopes such as 238, 235U, 232Th, and 209Bi, as well as isotopes of lead (208,207,206,204 Pb) and tungsten (186,184,183,182W) and 181Ta, which are frequently utilized in accelerator-driven systems (ADS). Two nuclear reaction codes were employed: CEM03.03, based on the Cascade-Exciton Model, and TALYS 2.0, which incorporates three different level density models: the Constant Temperature Model (CTM), the Back-Shifted Fermi Gas Model (BSFGM), and the Generalized Superfluid Model (GSM). The model-based calculations were compared with available experimental data and evaluated nuclear data libraries to assess model performance and to identify energy regions where further experimental measurements are needed. Additionally, a statistical comparison was conducted to quantify model accuracy using Pearson correlation coefficient (r) and R2 values across different energy ranges. These evaluations provide meaningful insights into the predictive capabilities and limitations of each model and offer guidance for the refinement of nuclear reaction simulations.
125304
Naeimeh Taherian, Nooshin Banaee and Navid Poursalehi
This study investigates the impacts of magnetic fields (0–7 Tesla) on Gamma Knife dose distribution using Monte Carlo simulations with GEANT4. Simulations were performed using both homogeneous water phantoms and heterogeneous phantoms containing bone, air, and soft tissue equivalent layers, employing 4, 8, and 16 mm collimators. Full width at half maximum (FWHM) and penumbra characteristics were calculated from dose profiles. The simulations incorporated realistic magnetic field gradients to approximate clinical MRI conditions. Results demonstrated the the magnetic field-induced shift of high-dose isodose lines, with displacements of 0.5–1.25 mm observed along the longitudinal (z-) axis, a magnitude of high relevance for radiosurgical precision. While magnetic fields ≤3 Tesla showed minor effects, the 7 Tesla field produced significant modifications, including a penumbra reduction of up to 5.8% and localized point-by-point dose changes exceeding 30% in two-dimensional distributions. In the heterogeneous phantom, the 7 Tesla field caused a deformation of the dose near interfaces, with a relative shift of the 90% isodose line by up to 65.8% and a 16% dose enhancement at bone-air boundaries due to the electron return effect. These results demonstrate that strong magnetic fields can induce significant distortions in dose distribution, highlighting the imperative for treatment planning systems to account for these effects, particularly near tissue interfaces in MRI-guided radiosurgery.
125305
Sunil Kumar, Mukul Kumar, Pankaj Kumar, Raj Kumar and Shashi K Dhiman
We investigate the effects of nuclear matter incompressibility on the equation of state of asymmetric nuclear dense matter, different nuclear matter parameters, and neutron star properties. To aim this, we consider six different interactions for the energy density functional in the relativistic mean field (RMF) model, where the incompressibility K varies from 200 to 300 MeV. The equations of state for β- equilibrated matter have been calculated for these functionals and confronted the predicted neutron star properties with various astrophysical observations. The central values of the linear density dependence of symmetry energy (L), neutron star radius (R1.4), and dimensionless tidal deformability (Λ1.4) for a 1.4 M⊙ neutron star exhibit a good correlation with incompressibility. A statistical analysis has also been performed to estimate the theoretical uncertainties on model parameters and related nuclear and neutron star observables.
125306
Faizuddin Ahmed and Abdelmalek Bouzenada
In this paper, we present a comprehensive study of ray geodesic and wave propagation in Lorentz-violating wormhole (LVWH) space-times embedded with topological defects. We first consider a configuration involving a cosmic string (CS), where we analyze null geodesic motion and derive the deflection angle of photons. The influence of both Lorentz symmetry violation (LV) and the cosmic string on the deflection angle is thoroughly examined. Using the derived deflection angle, we construct the lens equation and compare the results with those of the Ellis-Bronnikov wormhole (EBWH) for validation and contrast. To explore beyond the geometric optics approximation, we formulate the scalar Helmholtz wave equation within the curved background and investigate the wave-optical properties of the space-time. The resulting effective potential governing wave propagation is shown to be significantly affected by the wormhole throat size, the cosmic string parameter, and the Lorentz-violating terms The spatially varying refractive index emerging from this analysis explicitly depends on these factors, highlighting substantial modifications to the optical behavior of the system due to the combined influence of topological defects and LV effects. We further extend the analysis to a Lorentz-violating wormhole embedded in a global monopole (GM) background. A parallel investigation shows that, in this case as well, the effective potential and refractive index profile are shaped by the throat radius, the global monopole parameter, and the Lorentz-violating contributions. Our findings demonstrate that both CS and GM configurations, when coupled with Lorentz symmetry violation, yield rich and distinct modifications to wave optics in wormhole space-times, with potential implications for observational signatures and theoretical modeling of exotic gravitational structures.
125307
R H Ali, M K Awan, Badr S Alkahtani, G Abbas and Muneerah Alomar
In this analysis, we study the thermodynamic properties, phase structure, and critical behavior of a nonlinear electrodynamics charged black hole. Considering both the grand canonical and canonical ensembles, we employ the Bekenstein entropy and its non-extensive Rényi generalization. The Rényi parameter rescales the temperature and modifies the response functions, thereby shifting the stability windows and critical points. In the extended phase space, we derive a modified Smarr relation and the associated equation of state. Heat capacity divergences indicate second-order transitions, while the free energy structure exhibits first-order small-large black hole transitions: a Hawking-Page type transition in the grand canonical ensemble and a Van der Waals-like swallowtail in the canonical ensemble.
125308
Xiaoyong Guo, Nan Yang and Jian Liu
We propose NuPINN-CAL, a physics-informed neural network designed to directly predict nuclear proton density distributions, ρp(r), from the fundamental nuclear identifiers (Z, N). Unlike conventional Skyrme-Hartree–Fock (Skyrme-HF) and energy-density functional approaches, NuPINN-CAL explicitly embeds two key nuclear-physics constraints (proton-number conservation and charge-radius consistency) into its learning objective. A novel constraint-aware learning strategy dynamically balances these physics constraints with Skyrme-HF priors, ensuring stable and interpretable training even in small-data regimes.Benchmarking on 120 magic and semi-magic nuclei, NuPINN-CAL achieves a root-mean-square deviation of 0.022 fm in charge radii, representing a ∼33% improvement over Skyrme-HF predictions. Beyond numerical accuracy, the model demonstrates strong generalization to open-shell systems. These results validate the central hypothesis that (Z, N) uniquely determines ρp(r) as a deterministic and physically consistent mapping, highlighting NuPINN-CAL as a robust, interpretable, and data-efficient paradigm for next-generation nuclear density modeling.
125309
M Ismail, A Adel, A Y Ellithi and Alaa Khaled
This study presents a fully microscopic investigation of α-decay half-lives for 256 nuclei spanning atomic numbers Z = 52 to Z = 110, within the Hartree–Fock–Bogoliubov (HFB) framework using the Gogny D1S effective interaction. A key objective is to compare half-life predictions based on daughter-nucleus densities obtained from different approaches. Specifically, the double-folding potential is evaluated using (i) empirical Fermi-type densities, assuming either spherical or deformed shapes, and (ii) self-consistent ground-state densities derived from HFB calculations. In the latter case, two effective interactions are employed: the finite-range Gogny D1S force and the zero-range Skyrme force. The α–nucleus interaction potential is constructed through a double-folding method using the realistic M3Y-Paris nucleon–nucleon interaction. The calculated half-lives are systematically compared with available experimental data as well as other theoretical predictions to assess the accuracy and predictive capability of these microscopic approaches in describing α radioactivity. In addition, established systematics of α decay, such as the correlation between the logarithm of the half-life and the negative logarithm of the penetration probability, are examined to validate the physical consistency and overall reliability of the results. This investigation, which employs the Gogny interaction for multipole densities, may be considered a step forward in investigating their significance in the microscopic description of α decay.
125310
Deepak Sah and Manoranjan P Singh
We report on the dynamical scaling of momentum spectra for particle-antiparticle pairs at finite times within the framework of scalar quantum electrodynamics. The analysis focuses on the momentum spectra in the two choices of adiabatic mode functions, which are related by the Wronskian condition. Oscillations in the momentum spectra, at finite times, are attributed to quantum interference effects in the adiabatic number basis. A novel dynamical scaling behavior emerges when examining the oscillatory momentum spectra of pairs created by a Sauter-pulsed field at intermediate times. While the spectra with similar oscillatory features are observed at distinct times for the two different choices, they overlap when time is scaled by the time marking the first occurrence of the Residual Particle-Antiparticle Plasma stage (or end of the transient stage) for the central momentum case. This scaling identifies the approximate time at which real particle-antiparticle pair formation becomes possible, shifting the focus from asymptotic times to finite-time dynamics. Additionally, in the multiphoton regime, we find that the momentum spectra exhibit a multi-modal profile structure at finite times, consistent across both choices, and also follow the same dynamical scaling.
125311
I Ya Son, S V Artemov, N Burtebayev, S B Sakuta, Maulen Nassurlla, A A Karakhodzhaev, O R Tojiboev and Marzhan Nassurlla
The differential cross sections of the proton transfer in the 7Li(d, 3He)6He reaction were measured at deuteron energies of 14.5 and 25 MeV. These data, as well as data on the reaction 7Li(d, t)6Li at an energy of 14.5 MeV, were analyzed within the framework of a Modified Distorted-Wave Method. The values of the asymptotic normalization coefficients for the 7Li → 6He + p when the 6He nucleus is formed in the ground (0+) and excited 1.797 MeV (2+) states as well as 7Li → 6Lig.s.+ n were obtained.
Atomic and molecular physics
125401
Savinder Kaur, Kanupriya Goswami, Monika Bassi, Kasturi Lal Baluja and Anand Bharadvaja
The electron-induced collision cross sections for dichlorosilylene molecule are reported over a broad energy range using a combination of ab-initio and local potential based approaches. The ab-initio calculations in the low energy region (0.1 eV to the ionization threshold) are computed using R -matrix method. The static-exchange scattering calculations are evaluated as a function of box radii to determine its optimal value. Based on the analysis, the results in different scattering models are reported at R -matrix box radius of 15a0. The results include elastic and excitation cross sections. The shape resonance observed in the static-exchange model becomes bound in the static-exchange-polarization and close-coupling scattering models. The close-coupling model was investigated by considering varying number of excited states like 4, 9 and 28 states. Additional studies were performed at same box radius using smaller basis set to compare the cross sections. The elastic cross sections from the ionization threshold to 5 keV are computed using the single-center-expansion approach combined with local potentials. The total cross sections in this energy range are approximated from the incoherent sum of elastic and binary-Encounter-Bethe ionization cross sections. The close agreement of cross sections at ionization threshold determined from these two different approaches enabled us to determine the cross sections from low to high energy range.
125402
C Hajjaj, M Ouali, M Ouhammou, S Taj, B Manaut and M El Idrissi
In this paper, we explore the impact of relativistic electronic dressing on laser-assisted elastic collisions between electrons and hydrogen atoms, with particular emphasis on both exchange effects and direct processes in the relativistic regime. We begin our study by performing analytical calculations of the unpolarized differential and total cross sections for elastic scattering without any external radiation, which serves as a reference point to ensure the consistency and reliability of our calculations. Notably, the exchange process decreases as the kinetic energy of the incident electron increases in both relativistic and non-relativistic regimes, whereas the direct process shows an opposite trend. We then extend our investigation to include the influence of a laser field, which enables dynamic control over these processes through photon absorption and emission. By adjusting laser parameters such as intensity and frequency, notable variations in the exchange process can be observed. Although experimental validation of these processes in the presence of a laser field is currently lacking, theoretical studies offer significant insights into their behavior. Future experimental efforts, as recommended in the literature, are essential for further confirmation.
125403
The following article is Open access
Osama O Abu Galiah, Ahmad S Masadeh and Jafar M Aljaafreh
Zinc (Zn) crystallizes in a hexagonal close-packed (HCP) structure with a non-ideal c/a ratio (∼1.86), which makes it strongly anisotropic and prone to planar defects. To understand this structural complexity, we used atomic pair distribution function (PDF) analysis combined with different modeling approaches. Unit-cell refinements across short, intermediate, and long r-ranges confirmed the average lattice but showed large anisotropy in atomic displacements, indicating hidden local distortions. Extending the analysis with supercell models that included slip and interlayer relaxation improved the description of local and intermediate correlations. Simulations of stacking fault densities further explained the peak broadening and loss of long-range order seen in both XRD and PDF data, confirming that stacking faults are intrinsic to Zn. Finally, Gaussian fitting of the first coordination shell separated the overlapping in-plane and out-of-plane Zn–Zn bonds, showing how their bond lengths and coordination numbers evolve with temperature. Together, these results provide a unified view of Zn’s structure, combining average order, defect effects, and local anisotropy.
125404
Maoyin Hu, Tianlong Li, Jiwei Liu and Yuzhu Liu
This study used density functional theory (DFT), B3LYP and 6-311++(d, p) basis set to calculate the molecular structure and dissociation properties of the 1,1-difluoroethane molecule under different external electric fields. As the electric field strength increased, the C–C bond length shortened and the total molecular energy decreased, whereas the C–F bond length and molecular dipole moment showed a continuous increase. The energy gap first widened and then narrowed, leading to a decrease in the stability of the molecular structure. Infrared absorption spectroscopy mainly produced five characteristic absorption peaks. With increasing external electric field strength, most of the characteristic absorption peaks exhibited red shift; the tunneling effect also became increasingly apparent. Furthermore, the potential energy barrier for molecular decomposition gradually decreased as the electric field intensified. At a critical field strength of approximately 60.88 V·nm−1, the barrier nearly vanished, leading to the electric-field-induced degradation of 1,1-difluoroethane.
125405
Wenming Zhou, Jianhui Liu and Wenbang Chen
This article is based on the molecular dynamics (MD) simulation method to systematically study the effect of the phase boundary (PB) - grain boundary (GB) composite structure on the tensile strain rate sensitivity of the Biphasic fully laminar TiAl polycrystalline alloy (BFL-TiAl-PCA). By constructing multiphase models with the same grain size and orientation, the synergistic deformation mechanism, phase transition behavior, and porosity of phases/grain boundaries were analyzed in depth. The results indicate that the synergistic effect of PB and GB can effectively disperse local stress concentration, thereby improving the strength and stiffness of the alloy. Increasing strain rate narrows the performance gap between the two materials, revealing a more uniform deformation pattern. Pore growth accelerated primarily near the yield limit, while the γ/α2 multiphase structure significantly suppressed pore coalescence. The RDF and CSP analyses revealed that high strain rates inhibit atomic disorder and dislocation nucleation, enhancing crystalline structural stability. This study elucidates the strain rate sensitivity and interface strengthening mechanisms in BFL-TiAl-PCA, providing theoretical foundations for designing high-performance lightweight structural materials.
125406
Sumalya Kaluva and Mahadevappa Naganathappa
Azirines are three-membered nitrogen heterocycles of growing interest in supramolecular and spectroscopic studies, yet their intermolecular interactions remain underexplored. Here we investigate 2H-azirine monomers, dimers, and trimers using dispersion-corrected DFT (ωB97X-D/6-311++G(2d,2p)) with benchmark CCSD(T)/CBS single-point energies. Relative stabilities of the 1H- and 3H-azirine isomers agree with high-level reference data, establishing a reliable foundation. Scaled vibrational frequencies reproduce experimental IR spectra, allowing us mode assignments. TD-DFT calculations place electronic excitations in the vacuum UV, with solvent-induced redshifts reflecting the stabilization of frontier orbitals. Frontier orbital descriptors (HOMO–LUMO gap, ionization potential, electron affinity, global hardness, and electrophilicity) indicate that solvation enhances cluster stability while tuning reactivity. Many-body decomposition reveals measurable hydrogen-bond cooperativity in gas-phase trimers, which is strongly diminished in water. Non-cyclic trimers exhibit short, symmetric N···H bonds consistent with cooperative strengthening, while cyclic trimers display bond-length asymmetry arising from ring strain. Collectively, these results establish a coherent framework for hydrogen bonding, cooperativity, and solvent effects in azirine clusters, providing theoretical benchmarks that align with experiments and offering predictive guidance for future spectroscopic and nonlinear optical studies of azirine-based systems.
125407
Xuepeng Liu and Kaixin Xie
Molecular dynamics simulations are conducted to study the grain size, temperature, and strain rate dependences of the tensile properties and deformation mechanisms in polycrystalline hexagonal close-packed (HCP) CoCrFeMnNi HEAs. Our computations reveal that the plastic deformation mechanism of polycrystalline HCP CoCrFeMnNi HEA is predominantly mediated by grain boundary motion and stacking fault generation, while dislocation nucleation and propagation play a minor role. With increasing average grain size from 3.06 to 14.20 nm, the yield strength of polycrystalline HCP HEA shows a monotonic increase, consistent with the inverse Hall-Petch relationship. The damage behavior of polycrystalline HCP HEA exhibits a distinct grain size dependence, in which smaller grains lead to uniformly distributed damage throughout the specimen but larger grains result in severe local destruction. It is revealed that the polycrystalline HCP HEA exhibits significant thermal softening at elevated temperatures and remarkable strain rate hardening at higher strain rates. Furthermore, the dependences of deformation mechanisms on the temperature and strain rate are also analyzed in detail. These findings provide fundamental insights into the mechanical properties and deformation mechanisms of the polycrystalline HCP HEAs, offering important guidance for their rational design and engineering applications.
125408
Yan Song, Yongqi Wang, Yangde Li, Hetian Cheng and Zhihan Guo
The superatom behavior of N-centered Al-M (M = Li, Na, K) clusters with 26 valence electrons is revealed, which forms a closed shell configuration of 1S21P62S22P61D10. The Al6 cluster and M atoms form a core–shell structure, and the doping of N atoms enhances the structural stability. The valence molecular orbitals of Al6NM3 are in accordance with the predictions of the Jellium model. The electronic structure of the Al6N3− follows both the 8+18 electron rule and the Wade-Mingos rules. Al6NLi3 demonstrates the highest thermal and chemical stability, with a binding energy of −24.56 eV and a HOMO–LUMO gap of 6.37 eV at the QCISD level. This can be attributed to the smallest radius of Li+ and the greatest charge transfer from Li to the Al6N core, resulting in the strongest electrostatic interaction between Li+ and the anion moiety.
125409
Yuhang Sun, Weihua Chen, Jianfeng Han, Xingzhi Feng, Min Zheng, Xingchun Wei and Zongxiao Zhu
During the linear wear process between grinding balls and workpieces, a systematic investigation of the tribological behavior of a nickel-based single crystal alloy containing multiple short strip-like Laves phase particles was conducted. To investigate the tribological behavior between the abrasive ball and the substrate induced by friction, molecular dynamics simulations were employed, focusing on wear depth, atomic motion, and defect formation. It was observed that the magnitudes of friction force and hardness were related to the relative positions of the abrasive ball and the Laves phase, with extreme values occurring when the abrasive ball interacted with the Laves phase in the workpiece. The existence of the Laves phase impeded the transfer of temperature, defects, and atomic displacement , resulting in increased material surface hardness, reduced dislocation glide rate, and decreased average length of surrounding dislocations. Numerous dislocations accumulated along the surface region of the Laves phase, causing an increased dislocation density and enhanced wear resistance of the material surface. The Laves phase as a whole bore the atomic displacement motion, causing angle deviation of atoms approaching the Laves phase and internal layering within the Laves phase. Under constant load, slower friction speeds were associated with greater wear depth, a higher number of internal defects in the workpiece, and easier angle deviation of displaced atoms approaching the Laves phase, resulting in greater wear on the workpiece.
125410
Hamza Errahoui, Mohamed Karouchi, Abdelkebir Ejjabli, Abdelmounaim Laassouli, Aymane El Haji, Youssef Lachtioui and Omar Bajjou
The electronic, optical, thermodynamic stability, and hydrogen storage properties of the metal hydride halides Ca2H3Br and Ba2H3I were systematically analyzed using density functional theory (DFT). The optimized crystal structures demonstrate that both compounds crystallize in a monoclinic lattice with distinct atomic arrangements. Electronic band structure calculations reveal that both materials are indirect semiconductors, with Ca2H3Br exhibiting a smaller band gap (1.580 eV) than Ba2H3I (2.185 eV), indicating stronger visible-light absorption potential. Density of states analysis shows that Ba2H3I has a higher valence band density, favoring hole transport, while Ca2H3Br has a larger conduction band density, enhancing electron mobility. Optical properties, including the real and imaginary parts of the dielectric function, refractive index, extinction coefficient, absorption coefficient, and optical conductivity, indicate strong photon–material interactions in both the visible and UV regions. Ca2H3Br exhibits higher absorption in the visible range, whereas Ba2H3I is more efficient in the UV region. The calculated formation energies of −1.104 eV/atom for Ca2H3Br and −1.014 eV/atom for Ba2H3I confirm their thermodynamic stability. Moreover, hydrogen storage analysis shows gravimetric capacities of 1.86 wt% for Ca2H3Br and 0.75 wt% for Ba2H3I, highlighting Ca2H3Br as the more promising candidate for hydrogen-based energy applications. These results demonstrate that both materials are multifunctional, combining optoelectronic performance with stability and hydrogen storage potential, making them suitable for next-generation energy and photonic devices.
125411
The following article is Open access
R Cabrera-Trujillo
The compression of an atomic system produced by two parallel planes affects the energy levels and electronic properties of the atom and plays a crucial role in several areas of physics, materials science, and nanotechnology. These changes lead to enhanced or reduced electrical dipole moments and altered dipole oscillator strength depending on the atom’s nature and the extent of the compression. In this work, the behavior of the Generalized Oscillator Strength (GOS) of a hydrogen atom located between two impenetrable parallel planes is studied as a function of the inter-plane separation using the energies and wave functions previously reported [Physica Scripta 99, 065416 (2024)]. The changes of the GOS are analyzed as a function of the inter-plane distance when evolving from large—3D—to narrow—2D—separation and for parallel and perpendicular to the planes momentum transfer. The behavior of the electronic stopping cross section for the case of protons colliding with a hydrogenic confined quantum system impurity, as a function of the planes separation and collision energy for the parallel and perpendicular to the planes momentum transfer, are reported. The planes’ confinement leads to a channeling effect, which results from changes in the electronic spectra. This shift in the electronic energy levels reduces the electronic stopping cross section as the inter-plane separation decreases when the target is confined between the two planes.
125412
The following article is Open access
Duane H Jaecks, Lisa M Wiese, Dominic Calabrese, Brandon Jordon-Thaden, Orhan Yenen, Lisa Harlow, Jack Loos and Dennis Mueller
125413
Boyang Li, Yongquan Guo, Yichen Feng, Wei Tang, Xinqi Ren, Jiwei Liu and Linhan Yin
The equiatomic rare-earth high-entropy intermetallic compounds of (R11/n,R21/n,…, Rn1/n)2Co17, which are theoretically anticipated to be single-phase according to the high-entropy alloy thermodynamic principles, are fabricated via arc melting and vacuum heat treatment, and their structural and magnetic properties are systematically investigated using x-ray diffraction, energy-dispersive spectroscopy in field emission scanning electron microscopy, and magnetic measurements. All entropized samples are verified to be single-phase with Th2Zn17-type structure by the phase identifications of x-ray diffraction patterns. According to Rietveld structural refinements, the crystallographic positions are occupied randomly by equiatomic rare earths at 6c site, and fully by Co atoms at 6c, 9d, 18f, and 18h sites, respectively. The saturation moments of (R11/n,R21/n,…, Rn1/n)2Co17 are enhanced with increasing the number of rare-earth configuration entropies, while their magneto-crystalline anisotropies are uniaxial except for (Sm1/5Ce1/5Pr1/5Nd1/5Y1/5)2Co17, however, their anisotropic fields are gradually weakened with increasing the number of configuration entropies. The modulation on the magnetic properties is attributed to the high-entropy cocktail effect, which is caused by the uniaxial magneto-crystalline of Sm2Co17 and large saturation moments of R2Co17(R = Pr, Nd). These findings support developing high-performance R2Co17-type magnetic materials via entropy-mediated structural design.
125414
Ira Iryanti, Jun Hao Hue, Qidir Maulana Binu Soesanto, M Yusrul Hanna, Choirun Nisaa Rangkuti, Kwek Leong Chuan and Yanoar P Sarwono
The use of the variational quantum eigensolver (VQE) on near-term quantum computers for solving Kohn–Sham Hamiltonian is still underexplored. In this study, we apply the weighted subspace search variational quantum eigensolver (weighted SSVQE) to obtain the occupied KS orbitals, their corresponding energies, and the total energy, exploring the effects of varying entanglement unitary blocks, circuit depths, and optimization strategies. While the choice of optimization algorithm has minimal impact on the total energy, it significantly influences convergence behavior, stability, and computational time. Our results further reveal the existence of an optimal weight configuration that achieves both faster convergence and improved energy accuracy. Furthermore, our findings highlight the critical role of ansatz depth and entanglement unitary blocks on total energy calculations across molecular geometries. The most effective design begins with a low-expressibility, low-entangling ansatz, such as linear entanglement unitary blocks, and repeats it until a sufficient number of layers is achieved. Using homoatomic and heteroatomic molecule as test sets, the approach remains valid and effective across systems exhibiting different types of electron correlation. This approach proves highly efficient, enabling shallow circuits that avoid convergence issues and closely match standard density functional calculations. This work thus offers a design strategy for shallow, convergence-friendly VQE circuits that match standard density functional energies.
Electromagnetism, optics and photonics
125501
Yong Zhu, Xiansong Liu, Shuangjiu Feng, Shangpeng Chi and Xucai Kan
This study employs a sol–gel derived Al2O3 layer as an insulating coating for amorphous Fe-Si-B soft magnetic composites (SMCs). A streamlined sol–gel process for synthesizing the Al2O3 coating is reported, in which the hydrolysis of aluminum isopropoxide is conducted under magnetic stirring, with the conventional calcination step omitted. This modification mitigates potential damage to the magnetic powder caused by excessive heat or uncontrolled reactions. The effectiveness of this optimized alumina coating in enhancing the performance of the Fe-Si-B powder cores was evaluated through comprehensive magnetic characterization. The experimental results show that under the optimized process conditions, the magnetic properties of the samples have achieved the expected results (Pcv = 465.5 mW·cm−3 measured at 1 MHz, 20 mT, Pcv means power loss per unit volume, reduced by about 24.3% compared with the original powder).
125502
Risheek Kumar, Richa Agarwal, Sandeep Sharma and Mukesh Kumar Khandelwal
In-band full duplex systems have been strongly recommended for sixth-generation (6G) wireless networks. Hence, a dual-port, in-band full duplex (IBFD) antenna with extremely high isolation of about −103.5 dB between transmitter and receiver ports is designed and proposed for modern wireless applications. The proposed antenna works at a 2.5 GHz band, which is the most prominent frequency for wireless applications. A 180° hybrid coupler is designed on a single-layered substrate, which connects the transmitter and receiver sections with the radiator. The designed in-built modified rat-race hybrid coupler eliminates the self-interfering signals reaching the receiver from the transmitter during the simultaneous transmission and reception operation. The proposed antenna’s size is 60 mm × 100 mm × 1.6 mm. A prototype is fabricated to validate the simulated results.
125503
Jiaqi Liu, Di Yu, Wenbo Liu, Yubo Li, Haoyuan Song, Shufang Fu, Lifeng Feng and Xuanzhang Wang
This paper explores the influence of isotopic effects on spatial shifts within a metamaterial structure that incorporates black phosphorus (BP) and hexagonal boron nitride (hBN) with varying hBN isotopes, namely 98.7% 10B hBN, natural hBN, and 99.2% 11B hBN. Our findings reveal that hBN isotopes significantly modulate the optical phonon frequencies of hBN, leading to redshift or blueshift of the epsilon-near-zero (ENZ) point, which subsequently influences the magnitude and distribution of spatial shifts. The incorporation of BP layers not only induces the emergence of novel reststrahlen frequency bands (RBs) but also significantly enhances the beam shift performance by precisely tuning the doping concentration, layer number and twist angles. The simulation outcomes present that 98.7% 10B hBN and 99.2% 11B hBN display a pronounced enhancement in both Goos-Hänchen shifts (GHS) and Imbert-Fedorov shifts (IFS) at specific conditions, whereas 99.2% 11B hBN maintains larger shifts over a wide twist angle. The findings provide a theoretical foundation for developing isotope-tailored 2D photonic platforms, enabling multi-dimensional optical control.
125504
Yangtao Liu, Xiangyu Liao, Zhenbo Yan, Qiunan Zhang, Zhangwei Tong, Yongmei Wang, Chuanyang Huang, Jian Tang and Junhui Hu
This paper presents and experimentally demonstrates a curvature sensor utilizing intermodal interference. The sensor is constructed by splicing a no-core fiber (NCF) between 2 single-mode fibers (SMFs) and incorporating several peanut-shaped (P-S) structures. While adding multiple P-S structures enhances the excitation of high-order cladding modes, thereby influencing both curvature sensitivity and measurement range. The research results reveal that a 1 P-S structure yields a maximum curvature sensitivity of −31.95 nm/m−1. In comparison, the sensitivity decreases by 3.43 nm/m−1 with 2 P-S structures and by 17.5 nm/m−1 when the number increases to 3, with a corresponding reduction in sensing range of 0.467 m−1. Temperature tests reveal a sensitivity of 0.058 nm/°C and a temperature-induced curvature crosstalk of 0.0018 m−1/°C for the single-structure sensor. By adjusting the number of the peanut-shaped structures in the sensor, the sensitivity and detection range can be tailored for specific applications, such as extreme environment detection and deep-sea exploration.
125505
Wenyan Ran, Xiaozhan Yang, Cong Chen and Xiangzhi Liu
The low sensitivity often observed in conventional silicon-on-insulator gas sensors is primarily attributable to their low evanescent field ratio (EFR). This study introduces a high-sensitivity on-chip absorption gas sensor for methane detection that capitalizes on a plasmonic-enhanced suspended slit waveguide operating at the characteristic methane absorption wavelength of 3.392 μm in the mid-infrared region. The proposed dual-slot hybrid plasmonic suspended waveguide (DSHPSWG) is constructed with silver layers featuring subwavelength gaps on either side of an air-grooved suspended waveguide and incorporates large cross-sectional area tapers at both ends to minimize coupling losses. The dimensions of the DSHPSWG were optimized using the finite element method. The optimization yielded an ultra-high EFR of 0.8842 in a 24 μm long DSHPSWG operating under the TE0 mode, along with a propagation loss of approximately 0.31 dB μm−1. Based on Lambert–Beer’s law, the sensitivity of the device to CH4 gas can reach 0.1243 (mW/gas concentration). The DSHPSWG offers a significant advancement for the design of high-sensitivity and highly integrated on-chip gas sensors.
125506
The following article is Open access
Sven Ole Deist, Karl Huber, Maximilian Prager, Martin Härtl and Malte Jaensch
Understanding and mitigating limiting combustion phenomena, such as pre-ignition and knocking (termed combustion anomalies), is essential for establishing hydrogen as a viable fuel or blend component. Optically accessible engines are commonly used to gain spatially and temporally resolved insights into such abnormal events. However, the hydrogen flame spectrum is primarily in the ultraviolet (UV) range, which necessitates the use of costly and bulky UV-optimized hardware. Furthermore, the stochastic nature of these events limits the use of targeted excitation sources for conventional optical diagnostics. This study investigates ammonia as a potential gaseous dye at low concentrations (0.5 and 2 vol.-%) in preliminary non-engine experiments. The objective is to enable detection in the visible spectrum through the expected visible flame emissions from the amino radical (NH2*). Hydrogen-ammonia flames with 0–2 vol. − % ammonia were analyzed using high- and low-speed optical recordings in the visible and ultraviolet (Hydroxyl radicals (OH*)) ranges, alongside spectroscopic measurements in a turbulent burner. The OH* signal remained largely unaffected by ammonia addition, while NH2* effectively localized the flame, offering a visible alternative to UV-based detection. The impact of ammonia addition on key combustion parameters and the flame stability of the original hydrogen flame was analyzed using 0D-reactor and 1D-flame simulations. The NH2* radical, produced during ammonia combustion, proved to be a reliable flame marker due to its heat release dependence and position within the reaction zone. For the lean operating range relevant to hydrogen combustion, the deviations observed were comparable to commonly used tracers. For a 1 vol. − % ammonia fraction, the maximum deviation in laminar flame speed was 6 %. The ignition delay time showed negligible differences at pressures exceeding 15 bar. In this study, preliminary optical and simulative investigations demonstrate that small ammonia additions of 1 vol. − % are effective for dyeing hydrogen flames for localization purposes without significantly affecting combustion characteristics. These findings support future applications in engine-side operations.
125507
Vijayalakshmi Kannaiyan
This paper deals with the design of a polarization-insensitive absorber for terahertz (THz) applications. The absorber comprises a graphene-based convoluted resonator on a polyimide substrate with a copper ground plane, forming a metal–dielectric–graphene stack that facilitates multi-resonant behaviour. Simulations show five distinct absorption bands at 0.85, 1.45, 2.37, 2.89 and 5.00 THz, each exhibiting absorptivity greater than 96%. Owing to its symmetric configuration, the absorber properties remain independent of polarization and offers angular stability up to 60° under both Transverse Electric (TE) and Transverse Magnetic (TM) incidences. The analysis of electric field distributions indicates that the lower-order resonances originate from dipolar and loop current modes, while the higher-order responses are governed by plasmonic confinement in graphene and coupling between the convoluted arms. This hybrid resonance mechanism accounts for the stable five-band absorption. In comparison with conventional single- or dual-band designs, the proposed Perfect Metamaterial Absorber (PMA) offers a compact footprint, improved angular stability and reliable multi-band operation, making it well-suited for THz sensing and filtering applications. As a material sensor, the PMA achieves sensitivities of 313, 346, 313, 374, and 511 GHz per Refractive Index Unit (RIU) across its five operating frequency bands. Furthermore, the sensitivity variation with respect to analyte thickness is less than 4 GHz/μm, ensuring stable and reliable sensor performance. These results show the potential of the proposed PMA for high-precision terahertz material and bio-sensing applications.
125508
Mohd Haniff Ibrahim, Mohd Rashidi Salim and Nur Najahatul Huda Saris
Recent advances in photovoltaic (PV) research have highlighted the critical function of the electron transport layer (ETL) in determining solar cell performance, as it governs electron extraction, hole blocking, and interfacial recombination. This work investigates the potential of tungsten trioxide (WO3) as an ETL in chalcogenide perovskite (CP) solar cells through SCAPS-1D simulation. Two CP absorber materials, BaZrSe3 and CaHfSe3, were examined in combination with two benchmark ETLs, titanium dioxide (TiO2) and tin dioxide (SnO2), for comparison. The first analysis assessed the influence of ETL type on key PV parameters. Based on the ETL thickness of 100 nm and absorber thickness of 600 nm, SnO2 consistently yielded the highest power conversion efficiencies (PCEs), while TiO2 produced the lowest across both absorbers. From the simulated external quantum efficiency (EQE) and current–voltage (J-V) responses, WO3 demonstrated promising potential despite slightly lower efficiencies than SnO2. Under identical structural conditions, BaZrSe3:WO3 achieved a simulated PCE of 17.70%, whereas CaHfSe3:WO3 reached 14.85%, representing 5.9% and 4.8% reductions relative to their respective SnO2-based configurations. Additional analysis on the effect of ETL thickness confirmed that 100 nm is the optimal value, balancing carrier transport and optical losses. The influence of bulk defect density (Nt) showed that device performance degrades significantly when Nt ≥ 1015 cm−3, while maintaining Nt ≤ 1014 cm−3 ensures higher efficiency. Similarly, interface defect density (Nint) studies indicated that values below 1014 cm−2 are necessary to suppress recombination losses at the absorber/ETL interface. Parasitic resistance analysis showed that higher Rs and lower Rsh mainly limit FF and PCE, underscoring the importance of minimizing resistive losses. To benchmark the present findings, comparisons were made with previous studies, which show that WO3 delivers acceptable performance relative to other ETL materials, thereby reinforcing the reliability of the current simulation approach. These results underscore the importance of material compatibility and energy-band alignment in optimizing CP solar cell performance. Overall, WO3 emerges as a viable ETL candidate with strong potential for future development of stable, lead-free, high efficiency CP solar cells.
125509
Changyu Zhou, Xin Liu and Tao Shen
As an emerging family of two-dimensional materials, MXene has attracted extensive attention in recent years due to its excellent physical and chemical properties. Among them, V2C-MXene, a relatively new member, is still in a blank state in the application research of optical fiber sensing. This paper presents a micro-nano fiber coupler (MFC) sensitized based on a hybrid material of AuNPs and V2C-MXene (AuNPs@V2C-MFC), and applies it to temperature sensing. The experimental results show that within the temperature range of 30 °C∼90 °C, the prepared AuNPs@V2C-MFC sensor exhibits a temperature sensitivity of −177.43 pm °C−1, and its sensing performance is improved by 46.59% compared with the MFC coated only with V2C-MXene (V2C-MFC). Compared with MFC that has not been coated with any sensitive materials, the improvement rate reaches 158.76%. In addition, all three sensors have a linearity as high as 0.99. This paper not only verified the excellent performance of AuNPs@V2C-MFC in temperature sensing, but also expanded the application prospects of V2C-MXene in the field of optical fiber sensing application.
125510
Jiachi Zhang, Dongmei Liu, Rongchen Sun and Liu Liu
Wireless channel modeling remains a critical research focus, as the analysis and evaluation of any wireless communication system depend on reliable and accurate channel impulse response (CIR) models. This paper proposes a novel hybrid channel model to capture the non-stationarity of wireless channels in high-speed railway (HSR) environments. First, we abstract the propagation environment into vertices and apply a Fresnel zone constraint based on maximal propagation delay to select effective scattering points. Subsequently, we develop a non-stationary channel model incorporating both transceiver mobility and the time-varying evolution of obstacles. To enhance modeling accuracy, the model integrates line-of-sight (LoS), reflection, and scattering components, explicitly derived using a directive scattering framework. Building on this foundation, we simulate a typical HSR cutting scenario constructed with regular planes and analyze key statistical properties: power delay profile (PDP), Doppler power spectral density (DPSD), root-mean-square (RMS) delay spread, stationary interval (SI), path loss, and shadow fading. Validation against actual HSR cutting scenario measurement data demonstrates a close match in small-scale fading characteristics. However, discrepancies are observed in large-scale parameters, confirming the model’s effectiveness specifically for small-scale fading aspects.
125511
Shaode Li, Wei He and Zhehai Zhou
In this study, a photon localization modulation approach employing fiber Bragg gratings (FBGs) as frequency-selection elements is proposed. The effective integration of this system with a multifunctional random fiber laser (RFL) enables the establishment of a dual-modulation mechanism of spectral control and photon localization. The central wavelength of FBGs is adjusted through the heating platform to achieve frequency coincidence and enhance the local characteristics in specific modes, thereby flexibly controlling the photon localization feedback intensity. In addition to conventional multi-channel output, channel switching, and tunable laser emission, the designed RFL pioneers independent photon localization modulation across different channels. Experimental results indicate that the system is capable of achieving random laser (RL) output with high optical signal-to-noise ratio (OSNR > 33.56 dB) and narrow linewidth (< 5.3 kHz) under different channels. Furthermore, the temperature tuning of FBG1 successfully enhances the photon localization effect in channel 2 and channel 3 modes, remarkably increasing in the number of spectral spikes while improving the laser output stability and slope efficiency. Compared to existing multifunctional RFLs, this study represents a novel approach to build a high-performance and flexibly controlled multifunctional RFL by the pioneering the successful integration of spectral modulation and internal photon localization within RFLs.
125512
Srinivas Lingala and Sunil Singarapu
This work introduces the design and realization of a compact graphene–VO2–based metamaterial absorber that can seamlessly switch between broadband and narrowband absorption modes in the terahertz region. The structure employs a hybrid stack incorporating a gold reflector, a SiO2 dielectric spacer, patterned VO2 inclusions, and a monolayer of graphene to achieve dynamic tunability through VO2 phase transition and graphene electrostatic modulation. In its broadband operating state, the absorber achieves a wide absorption window of 7.6121 THz, extending from 2.2101 THz to 9.8222 THz, which ensures excellent performance for electromagnetic interference suppression and shielding applications. Under narrowband operation, the device produces a sharp resonance at 3.94 THz with a sensitivity of 2.4, making it highly suitable for refractive index biosensing. The proposed design further demonstrates stable absorption over a wide range of incidence angles and maintains polarization insensitivity, underlining its robustness for practical deployment. To accelerate optimization, machine learning models were employed to predict absorption behavior, resonance variations, and sensing responses, thereby minimizing dependence on computationally intensive full-wave solvers. Overall, the combination of compact architecture, switchable broadband–narrowband functionality, high tunability, and ML-assisted optimization positions this absorber as a strong candidate for future terahertz biosensors, EMI control components, and multifunctional photonic platforms.
125513
Yongze Yu, Yufei Chen, Tengfei Dai, Xiaoxiang Zhang, Zhenglin Wang, Chengrong Chen, Yinqiang Xiao and Jianhua Chang
Electro-optic (EO) modulators play a critical role in converting electrical signals into optical signals. With the growing demand for higher data traffic and broader network bandwidth, there is an increasing need for high-performance, highly integrated EO modulators. Thin-film lithium niobate (TFLN) modulators have emerged as a promising solution for next-generation integrated photonic circuits due to their low power consumption, wide bandwidth, compact footprint, and well-established fabrication process. Our research proposes a Mach–Zehnder modulator (MZM) based on silicon-based TFLN, aiming to achieve a balance between low half-wave voltage product (Vπ·L), low optical loss, and high bandwidth. Through systematic design of the waveguide geometry and cladding structure, we demonstrate a modulator with a Vπ·L of 0.69 V·cm, a propagation loss of 0.578 dB cm−1, and a 3-dB bandwidth exceeding 110 GHz at 1550 nm.
125514
Zhiyuan Zhou
While chiral emission from electric dipoles coupled to hyperbolic materials has been widely studied in terms of field intensity, such an approach fails to adequately capture the chirality of energy transmission when the projection of the hyperbolic isofrequency surface onto the propagation plane is anisotropic. In this work, we investigate chiral energy transmission from an electric dipole with varying polarization handedness coupled to a hexagonal boron nitride (hBN) layer exhibiting in-plane hyperbolic dispersion contours. The dispersion relation and scattered electric Green’s function for the uniaxial medium are derived using eigenvectors of ordinary and extraordinary waves, under boundary conditions enforcing tangential field continuity. Distributions of field intensity and energy flux reveal that chiral emission arises from the breaking of inversion symmetry, enabled by the phase difference between the horizontal and vertical components of the dipole moment relative to the hBN interface. This chirality can be maximized by tuning this phase difference. However, we find that the maximum chirality of the total energy flux is substantially lower than that of the field intensity, indicating limited directionality in light propagation. This discrepancy is attributed to a significant portion of energy being scattered into directions unaffected by the breaking of inversion symmetry. Furthermore, we show that the chirality of energy flux can be greatly enhanced through energy canalization within the hBN layer under extreme permittivity conditions. These findings offer insights into achieving highly directional light propagation in hyperbolic media and may support advances in chiral quantum optics.
125515
Salma Rizk, Seham Abd-Elsamee, El Said A Marzouk, Hana M Amer and Nihal F F Areed
The rapid and accurate detection of blood components plays a vital role in modern medical diagnostics and health monitoring. In this work, we propose a two-dimensional photonic crystal (PhC) biosensor capable of efficiently identifying ten different blood components and biochemical analytes with high precision. The sensor is constructed from a square-lattice arrangement of silicon rods with a radius of 100 nm and a lattice constant of 540 nm, supporting a TE photonic bandgap in the range of 1250–2100 nm. Two-line defects and an eye-shaped defect are incorporated to track resonance wavelength shifts arising from variations in the refractive index of blood samples. Numerical analysis was conducted using the two-dimensional finite element method (2D FEM) and plane wave expansion (PWE) method to evaluate the optical characteristics of the proposed PhC biosensor. Simulation results demonstrate that the proposed design achieves outstanding transmission efficiency, ranging from 83.6% to 99.1%, coupled with high sensitivity values between 270 and 327.2 nm RIU−1. The biosensor further exhibits remarkable quality factors (Q-factor) (27,122.2–54,377) and a figure of merit (FoM) in the range of 5,167–10,907, along with a low limit of detection of 9.3 × 10−6 RIU and stable response. These findings highlight the potential of the proposed biosensor as a powerful platform for advanced biomedical sensing applications.
125516
The following article is Open access
Amina Shafique, Uzma Amin and Ahmed Abu-Siada
In perovskite solar cells (PSCs), the thickness and choice of electron transport layers (ETLs), together with the transparent electrode, are critical in balancing device efficiency and optical transparency. This study investigates a pyramid-shaped oxide-based (PSO) multilayer structure as the top transparent electrode in PSCs employing methylammonium lead iodide (MAPbI3) as the absorber layer. Optical optimisation of both the transparent electrode and the complete device architecture was performed using the Computer Simulation Tool. The optimised electrode configuration achieves an impressive average visible transmittance (AVT) exceeding 95%. Furthermore, the influence of different ETL materials, absorber layer thicknesses, and structural periodicity on device performance was systematically studied. The absorption behaviour under transverse electric and transverse magnetic polarisations, as well as at various oblique incidence angles, was analysed across the entire spectral range. The symmetric design ensures a polarisation-insensitive optical response. Electric field distribution analyses further reveal enhanced light confinement within the absorber. The optimised device structure exhibits 70% absorption in the ultraviolet region and an AVT of 86%, demonstrating its strong potential for high-performance semitransparent PSC applications.
125517
Yong Wang, Yinying Peng, Pablo Cencillo-Abad, Yi Xu, Rui Shi and Liwei Zhang
In this paper, we theoretically investigate multiple strong coupling phenomena in Cantor-like photonic crystals (PCs) composed of Si and SiO2 layers with embedded Weyl semimetal (WSM) defect layers. Using the transfer matrix method, we show that the fractal geometry of the Cantor-like PCs supports multiple resonant modes, while the WSM layer exhibits an epsilon-near-zero (ENZ) response. Strong coupling between the ENZ mode and the fractal resonances leads to pronounced Rabi splitting. The coupling strength and spectral positions of the split modes can be dynamically tuned by varying the Fermi energy, axial separation vector, temperature of the WSM, and the angle of incidence. Additionally, the number of splitting modes can be controlled by adjusting the generation number of the Cantor-like sequence. This work proposes a simple and versatile layered structure for achieving controllable Rabi splitting, with promising applications in optical sensors, filters, and other advanced photonic devices.
125518
The following article is Open access
Harith Ahmad, Khalil Kamaruzzaman, Muhamad Zharif Samion and Norazriena Yusoff
In this study, we demonstrated the first utilization of a Nb2C/Fe3O4 composite as a saturable absorber (SA) drop-casted on an arc-shaped fiber, for ultrashort pulse generation in a holmium-doped fiber laser. The SA successfully generated stable, ultrashort pulses centered at 2.08 μm. The pulses had a fundamental repetition rate of 16.03 MHz and a pulse duration of 1.75 ps. To further enhance the output, the signal was amplified using a separate HDFL amplifier, resulting in an average power of 53.5 mW and a slightly broadened pulse duration of 5.03 ps, corresponding to a peak power of approximately 667.5 W. These findings demonstrate the potential of Nb2C/Fe3O4 composites for ultrafast laser generation and highlight their suitability for extending the capabilities of ultrashort fiber lasers into longer wavelength regions.
125519
Jingyi Tian, Zhenhua Du and Xiaoliang Dong
Accurate monitoring of reproductive hormones (e.g., GnRH, FSH, and luteinizing hormone) is essential for reproductive health and clinical diagnosis. To meet the increasing demand for highly sensitive, portable, label-free detection tools, a highly sensitive dual-polarization detector PCF-SPR sensor based on a notch-type with air holes arranged in an orthogonal pentagonal shape is proposed in this paper. The sensor uses Au as the double-layer material for plasma excitation, and achieves a maximum sensitivity of 23000 nm RIU−1 after analysis and optimization using the finite element method. Secondly, we further analyzed the detection range and maximum wavelength sensitivity of the sensor with different combinations of materials, and the results confirm that the designed sensor exhibits responsive properties to a variety of materials, which provides a valuable reference for the scientific selection of metal materials in subsequent studies. Meanwhile, the proposed sensors can be used not only for the detection of reproductive hormones but also for environmental testing, organic chemical testing, food testing and other fields.
125520
Xingyu Gao, Wenlong Wang, Weiming Li, Shuibiao Chen and Jianfeng Yue
The accuracy of optical plane calibration is key to achieving high-precision three-dimensional measurement. This paper proposes a high-precision and robust optical plane calibration method (HRPC method) in response to the issues that the accuracy and efficiency of existing optical plane calibration methods are susceptible to errors in homography matrix transformation and laser center point extraction. The method introduces two important innovations: First, by calculating the centroid of calibration points, performing decentralization, applying Gaussian weighting, the scale factor of the matrix can be calibrated, and then the camera extrinsic matrix is optimized based on the partial least squares fitting method. Second, a quadratic denoising-based line laser center point extraction method is proposed. This method uses an adaptive dynamic neighborhood weighting expression to perform initial denoising on the line laser center points. Based on the camera perspective principle and the homography matrix, combined with the optimized camera extrinsic parameters, a quadratic denoising equation is established to carry out secondary denoising on the line laser center points, followed by optical plane fitting. Through experiments conducted on a self-built robotic 3D measurement system, the HRPC method is compared with existing methods. The results show that the accuracy, stability, and adaptability of the proposed method are superior to those of traditional algorithms. For a stepped gauge block with a step height of 5 mm, the average measurement error is 0.0102 mm after multiple measurements.
125521
Hanlin Song, Pibin Bing, Lanju Liang, Xin Yan, Zhongyang Li, Zhenhua Li, Haiyun Yao, Ziqun Wang, Xiaofei Hu, Chuanxin Huang et al
To address the pressing and evolving requirements of advanced terahertz (THz) logic devices in next-generation 6G communications and high-resolution imaging systems, this study proposes a THz logic device featuring synergistic modulation through thermal and bias-controlled. The proposed device is composed of patterned aluminum, graphene, and amorphous strontium titanate functional layers. The transmission amplitude of the THz resonance peak was effectively and simultaneously modulated through dual external excitations, specifically thermal (300–490 K) and electrical bias (0–4 V) inputs. Experimental results reveal that thermal excitation governs the modulation behavior of the bias voltage, effectively functioning as an enabling mechanism analogous to a tri-state logic gate. Notably, three distinct transmission amplitude states—0.33, 0.40, and 0.429—were achieved, demonstrating tri-state logic operation. These findings indicate a constant-resistance state at low temperatures and binary logic output at elevated temperatures, validating the device’s potential for advanced THz logic applications.
125522
Ali Hussein Nayyef Al-Fatlawi, Samad Roshan Entezar and Amir Madani
Vanadium dioxide (VO2), with its well-known insulator-to-metal transition, offers a powerful mechanism for dynamically tuning optical responses. Leveraging this phase-change behavior, we theoretically propose and analyze a thermally tunable one-dimensional topological photonic crystal composed of a thin VO2 front layer integrated with alternating Al2O3 and Si dielectric layers. In this structure, topological behavior arises from distinct Zak-phase configurations and the associated bulk–boundary correspondence, enabling the formation of protected edge states through inversion-symmetry breaking between two photonic crystal sequences,
and
. Using the transfer-matrix method, we demonstrate that the VO2 phase transition induces pronounced temperature-dependent modulation in transmission, reflection, and absorption spectra. This transition enables dynamic control of the interface-localized topological mode, producing strong field confinement, spectral asymmetry, and real-time tunability of the edge state. The proposed configuration maintains robust optical performance under moderate thickness and polarization variations, highlighting its numerical stability despite the lack of experimental realization. Importantly, introducing VO2 as a front-layer element allows modulation of pre-existing topological edge states without altering the bulk Zak phase. This design achieves a transmission modulation depth of 56% and an absorption variation from 14% to 70% at ∼149 THz, while also outperforming non-topological VO2 structures in spectral stability (<0.1 THz shift) and resilience to ±5% structural disorder. Compared to earlier VO2-integrated photonic crystals that lack topological protection, the proposed platform enables reconfigurable operation suitable for thermal switching, adaptive NIR filtering, and optical memory, with prospects for sub-microsecond modulation using integrated heaters. Overall, these results establish VO2-based topological photonic crystals as promising, tunable, and robust candidates for next-generation adaptive photonic devices with thermally controlled spectral functionalities.
125523
Han Bao, Zhi Qin, Jianfeng Li, Haojie Li, Yijun Zhe, Kaicheng Zhou, Tao Xu, Xiaoqing Jia, Xuecou Tu, Labao Zhang et al
Superconducting microstrip single photon detectors (SMSPDs) exhibit high signal-to-noise ratios and large active areas, demonstrating broad application potential in high-energy particle detection, wide-field imaging, LiDAR, and related fields. To further improve the detection efficiency and operating temperature of SMSPDs, it is essential to bias the device with a current as close as possible to the depairing current—that is, to achieve the constriction factor (the ratio of the switch current to the depairing current) approaching unity. Currently, the geometric current crowding effect in the meandering region of the microstrip is regarded as the primary factor limiting the current constriction factor. In this study, we systematically evaluated three strategies for mitigating this effect: thickening the superconducting film at meandering region, increasing the width of the meandering region and localized ion milling in the straight section of the microstrip. Through theoretical simulations and comparative measurements of the switching current in identically sized MoSi microstrips incorporating these three modified structures, we demonstrated that all approaches effectively suppress current crowding. Notably, the ion milling method increased the device’s constriction factor from 0.44 ± 0.02 to 0.69 ± 0.02. This technique not only reduced current crowding but also enhanced device sensitivity. By implementing this approach, we achieved near-saturated intrinsic detection efficiency at 1550 nm under 1.7 K, offering a practical strategy for optimizing the performance of large-area SMSPDs.
125524
Hui Zheng, Xia Zhang, Yan Li, Shi-Tong Xu and Ying-Hua Wang
We present a y-shaped metasurface structure integrated with dual U-shaped rings. This structure can excite two resonance modes under linearly polarized wave incidence at 0.28 and 0.49 THz, meanwhile the x-and y-polarized AT values reach up to 0.73 and 0.62 at the two resonant frequencies, respectively. As we know, the linearly polarized wave is a degenerate mode and it can be decomposed into LCP and RCP components with equal amplitude and opposite helicity. Herein, when the incident wave is LCP and RCP, the above two resonance modes undergo degeneracy breaking around 0.28 and 0.49 THz, ultimately forming the independent resonances at 0.26 (0.46) and 0.31 (0.50) THz for RCP and LCP, respectively. As a result, quad-band CD effects achieved at the four resonant frequencies, with values of 0.49, 0.46, 0.56 and 0.64, respectively. Dynamic modulation of the amplitude and frequency response of both AT and CD effects are enabled by adjusting the Fermi energy level of the graphene. This design provides a novel approach for developing multifunctional tunable chiral devices, with potential applications in terahertz communications, biosensing, and polarization control technologies.
125525
Qingyu Hou, Hailan Li, Wen Ma and Zhenchao Xu
Currently, while there has been experimental progress in effectively modifying the multiferroicity of ZnO via doping, a corresponding understanding based on first-principles studies is still lacking. This work therefore employs first-principles calculations to investigate the multiferroic properties of ZnO with Co doping and oxygen vacancies (Vo). The results indicate that both Co doping and Vo are stable in the ZnO lattice. Under oxygen-rich conditions, the formation energies of all doped systems are lower—and indeed negative—compared to those under Zn-rich conditions. At an oxygen vacancy concentration of 1.16 × 1021 cm−3, the Zn35Co1O35 system exhibits good ferroelectricity, ferromagnetism, and half-metallicity. The Co-3d states demonstrate itinerant electron characteristics. Furthermore, the Zn34Co2O35 system meets the criteria for ferromagnetic materials that exhibit room-temperature ferromagnetism. The calculated results are consistent with existing experimental data.
125526
Huaiqing Zhang, Chenyu Peng, Zhenteng Fan, Hui Xiao, Jinpeng He, Heng An, Jie Gong and Yueshuai Zhao
In microwave power transfer (MPT) systems, polarization mismatch at the receiving terminal can significantly affect power transfer efficiency. To address this issue, a polarization-insensitive and wide-angle linear polarization converter (LPC) is presented in this work. Measurement results show that the converter achieves a polarization conversion ratio (PCR) of 95% and an insertion loss (IL) of −0.9 dB at 5.8 GHz. A fourfold rotationally symmetric orthogonal patch structure ensures polarization-insensitive performance. The results confirm that the converter maintains efficient polarization conversion across arbitrary polarization angles, with a PCR exceeding 90.4% within an incident angle (θ) range of 0°–40°, effectively overcoming the angular and polarization sensitivity limitations of conventional converters. The MPT experimental data shows that after integrating the LPC on the receiver under cross-polarization conditions, the received power reaches about 97% of the harvested power under co-polarization conditions. The results demonstrate that the proposed LPC has significant potential for MPT applications.
125527
Ying Zou, Yanhui Li, Pengfei Yang and Lu Bai
This study investigates the impact of different transmitted pulses on the laser one-dimensional range profile of targets, using a monostatic laser radar system. The target models, including a flat plate, cone, sphere, and airplane, are illuminated with various pulse waveforms, pulse widths, and pulse repetition rates, and the corresponding one-dimensional range profiles are obtained. The results reveal that the pulse waveform has a negligible influence on the range profile when the same target model is illuminated by different pulse waveforms. When the pulse width is significantly smaller than the target size, high-quality imaging is achieved; however, when the pulse width increases, the imaging tends to approximate the transmitted waveform. The pulse repetition rate has the influence of anti-noise and analysis of echo loss for range profiles. The findings indicate that the transmitted pulse characteristics significantly influence the imaging quality of the one-dimensional range profile, providing valuable insights for target characteristic analysis and recognition.
125528
Syeda Firasath Fatima, Atul Kumar Nishad and Vipul Kumar Nishad
Skyrmionium, a topological spin texture with zero net topological charge, has garnered significant attention for its potential in next-generation spintronic devices. Unlike conventional skyrmions, skyrmioniums exhibit straight-line motion, effectively bypassing the Skyrmion Hall effect, which is a key advantage for reliable device operation. Herein, we report a combined micromagnetic-simulation and semi-analytical study revealing that tuning uniaxial anisotropy to
is key to both stabilizing and miniaturizing skyrmioniums in magnetic nanotracks. At this optimal
, skyrmioniums remain stable down to
A m−1 and attain an equilibrium diameter of ≈65.6 nm, which is suitable for sub-250 nm track-width devices. In contrast, deviations of more than ±10% in
compromised the stability at low
values. Under drive currents ranging from
to
, the velocity follows
, exceeding
m s−1 at low anisotropy. Meanwhile, variations in the Gilbert damping (
) alter the speed by less than
. These results establish
as a design rule for compact, high-speed, Hall effect-free skyrmionium devices.
125529
Ailar Alizadehsabegh, Saeed Golmohammadi and Amin Abbasiyan
Here, we present a 12-fold quasi-periodic PCF-SPR sensor composed of Ge-doped silica and elliptical air holes, designed for analyte detection in the refractive index range of 1.31–1.41. The outer surface of the cladding is coated with a 40 nm gold layer. Practical dimensions of a = 7.5 μm, r1 = 1.5 μm, and r2 = 0.8 μm are considered for the lattice constant and air holes. The sensor achieves wavelength sensitivity, amplitude sensitivity, and resolution of 10400 nm RIU−1, 671 RIU−1, and 9.62 × 10–6 RIU, respectively, within the detection range of na = 1.31–1.41 and wavelength range of 500 nm-1000 nm. The finite element method (FEM) is used to analyze the characteristics of the proposed sensor for chemical and biosensing applications within the mentioned detection range.
125530
Manshree Mishra, Lalit Kumar Sahu, Pramod Kumar Gupta, Garima Tiwari, Atul Kumar and Biswajeet Mukherjee
Modern wireless communication systems include phased array antennas as essential components. Cylindrical Dielectric Resonator Antenna (CDRA) arrays on planar ground planes are widely explored. Conformal arrays have several advantages over flat arrays, including reduced aerodynamic drag, and wider coverage angles. Therefore, a conformal phased array CDRA is proposed in this paper. For efficient radiation, a CDRA fed by a rectangular slot aperture coupled feed excites the HEM11δ mode. For obtaining a higher directive gain, a 1 × 4 CDRA array is designed. 5 dBi improvement in gain is obtained by a 1 × 4 CDRA array. A cylindrically conformal phased array, placed on a 360 mm radius cylindrical surface, is presented for wide beam scanning. The impedance bandwidth obtained for the proposed conformal CDRA array is 22% which ranges from 7.6 to 9.5 GHz. The proposed array can scan from −25° to +25° with a gain fluctuation of less than 4 dBi. Within the impedance bandwidth, the isolation between neighboring elements is less than −25 dB. The peak gain of the conformal CDRA array is 10.2 dBi at a frequency of 8.7 GHz. The efficiency of the antenna is more than 91% for the whole band. Additionally, with a height of 0.08 λ0, the 1 × 4 CDRA array has a low profile which offer significant benefits in advanced packaging. The study that is being proposed finds applications for conformal platforms in high-speed vehicles, missiles, and aircraft.
125531
Banoth Yakub and Amarjit Kumar
This paper presents a novel MIMO antenna configuration that utilizes cylindrical dielectric resonator antennas (CDRAs) integrated with substrate integrated waveguide (SIW) technology, tailored for wideband operation within the terahertz (THz) frequency range. A Defective Ground Structure (DGS) was incorporated into the two-port SIW-MIMO CDRA framework to achieve an enhanced bandwidth performance. Circular polarization (CP) is obtained across the desired frequency bands. The incorporation of a graphene layer on the CDRA surface alters the resonant behavior, resulting in a noticeable shift in the antenna’s operating frequencies. The antenna exhibits two separate wideband responses, achieving an impedance bandwidth of 1.51 THz from 4.6 to 6.11 THz and 2.05 THz across the 7.71 to 9.76 THz spectrum. Isolation exceeding ≤ –25 dB is consistently sustained over the operational bandwidth. Moreover, the antenna supports dual-band circular polarization, offering 3 dB axial ratio bandwidths (ARBWs) of 23.23% between (4.68–5.85 THz) and 15.56% between (8.02–9.50 THz). A peak gain of 6.02 dB is recorded, along with a high radiation efficiency of 78.26%. By modifying the feed lengths, the polarization characteristics can be effectively tuned, rendering the design adaptable for diverse THz applications. The antenna’s MIMO capabilities are validated through essential diversity performance indicators, including an Envelope Correlation Coefficient (ECC) below 0.01, a Channel Capacity Loss (CCL) under 0.5 bps Hz−1, a Mean Effective Gain (MEG) of –3 dB or better, a Diversity Gain (DG) close to 10 dB, and a Total Active Reflection Coefficient (TARC) of less than –10 dB. Additionally, the application of a graphene coating plays a significant role in expanding the impedance bandwidth while enhancing both frequency agility and axial ratio tunability.
125532
Manjun Yan
A spatial light modulator is a commonly used device for mode shaping, capable of efficiently generating higher-order modes. To enhance the precision of wavefront phase modulation by a spatial light modulator, this paper proposes a method for measuring the phase modulation characteristics of the spatial light modulator by controlling the polarization of the light field. The system features a simple structure and high measurement efficiency, completing the entire measurement process in just two minutes. Finally, a comparison is made between the intensity distributions of higher-order mode generated by the mode shaping system using spatial light modulator before and after phase modulation characteristics calibration. The results demonstrate a 10% increase in the intensity correlation coefficient of the higher-order mode after calibration, providing a reference for implementing wavefront calibration using an SLM in mode shaping systems.
125533
Yongbin Ma, Zhonggen Xu, Arpan Desai, Karthikeya G S and Vigneswaran Dhasarathan
This paper presents a high-selectivity compact planar filtenna for mm-wave applications. The proposed design integrates the BPF with the wideband antipodal Vivaldi antenna to realise a compact Ka-band filtenna, specifically targeting the 5G n257 band (26.5–29.5 GHz). The BPF is first designed in ADS and then validated through full-wave HFSS simulations for its operation in the Ka-band. Furthermore, the impact of lossy and low-loss substrates on the filter’s S-parameters is investigated, highlighting the crucial role of the loss tangent (tan δ) in mm-wave performance. The resulting filtenna achieves high frequency selectivity, enhanced out-of-band suppression, and improved impedance matching. A realised gain of more than 8 dBi is achieved with a low-loss substrate, while the gain reduces to about 4 dBi when a lossy substrate is used. Owing to its compact planar configuration and endfire radiation pattern, the design ensures ease of integration into modern RF front ends while maintaining effective filtering and radiation performance within the Ka band.
125534
Mohd Haniff Ibrahim and Ahmad Sharmi Abdullah
There has been growing interest in antimony chalcogenide (AC) solar cells owing to the advantages of their absorber materials, yet their performance remains limited by interfacial losses. Although conventional hole transport layers (HTLs) such as Spiro-OMeTAD have been widely employed in AC solar cells, their cost and durability remain limiting factors. In this work, we present the first simulation-based evaluation of kesterite compounds as HTLs in AC solar cells comprising antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) absorbers. Three candidates, namely Cu2ZnGeS4 (CZGS), Cu2BaSnS4 (CBTS), and Cu2FeSnS4 (CFTS), were investigated using the SCAPS-1D platform and benchmarked against the conventional Spiro-OMeTAD. TiO2 and ZnS were incorporated as electron transport layers (ETLs), and device performance was assessed with emphasis on band alignment, layer thickness, and key photovoltaic parameters. Results show that favourable valence-band alignment with CZGS and CBTS enables efficient hole extraction and suppressed recombination, leading to higher efficiencies than Spiro-OMeTAD. For CZGS, CBTS, and Spiro-OMeTAD, optimum absorber thicknesses were 600 nm for Sb2Se3 and 800 nm for Sb2S3, while CFTS required thinner absorbers (300 nm and 500 nm) but exhibited inferior performance. Simulated absorbance and external quantum efficiency (EQE) spectra revealed that TiO2, ZnS, CBTS, and CZGS exhibit strong optical transparency, while CFTS suffers from parasitic absorption that suppressed photo-response. Both Sb2S3 and Sb2Se3 absorbers demonstrated strong broadband absorption in the visible–near-infrared range, validating their efficiency as photon harvesters. The optimized Sb2Se3-based configurations with CZGS and CBTS achieved band-edge responses up to ∼ 1050 nm and delivered the highest efficiencies of 26.38% and 25.92%, respectively, surpassing Spiro-OMeTAD-based devices (24.18%), whereas CFTS yielded only 9.67%. Parasitic resistance analysis further confirmed that increasing series resistance (Rs) and decreasing shunt resistance (Rsh) degrade the fill factor (FF) and power conversion efficiency (PCE), consistent with established photovoltaic models. Varying HTL thickness between 20 and 200 nm showed negligible impact once uniform, pinhole-free coverage was achieved, confirming that intrinsic material properties dominate device performance. Comparison with published reports reinforces the validity and credibility of our proposed design. Overall, the results identify CZGS and CBTS as highly promising kesterite-based HTLs, and the earth-abundant, non-toxic nature of these compounds underscores their potential for sustainable, high-efficiency AC solar cell development.
125535
Javier Salinas-Luna, Juan Mentado-Morales, Arturo Ximello-Hernández and Jorge Castro-López
In the present work, an attempt has been made to identify an organic compound that can perform as a secondary calibrator of a Coupled-Optical Fiber Raman Spectrograph (COFRS) at 785 nm in the range of 100–3300 cm−1. Considering not only the chemical stability and purity but also the uneven spectral distribution of Raman peaks of some organic molecules such as Benzoic Acid, Acetone, Benzene, Methylene Chloride, and Dimethyl Sulfoxide, a wavenumber calibration analysis was developed. Accordingly, the wavenumber calibration behavior was monitored by obtaining Raman spectra of diverse standards with different functional groups, such as Ethanol, Methanol, 2-Chlorophenol, 4-Chlorophenol, Chloroform, 1,2,4-Triazole, Cyclohexanone, n-Hexane, Toluene, Sodium Dodecyl Sulfate, and Ethyl Acetate. Since acetonitrile is used as a COFRS calibrator with several tall peaks throughout the spectral range—a preferable feature for obtaining an acceptable calibration—it has been found that there is a low dispersion of the central wavenumber maxima in the Raman signals for Dimethyl Sulfoxide as well as Benzene, Acetone, Benzoic Acid, and Methylene Chloride during the wavenumber calibration in both the entire and fingerprint spectral ranges of COFRS, respectively. This result demonstrates that COFRS can be calibrated with Dimethyl Sulfoxide, despite its uneven spectral distribution of Raman peaks along the analyzed spectral range.
125536
Galip Orkun Arican
In this work, a W-band Low-Noise Amplifier (LNA) based on millimeter wave (mm-Wave) Monolithic Integrated Circuits (MMICs) with utilizing Gallium Nitride (GaN) on Silicon Carbide (SiC) High Electron Mobility Transistor (HEMT) technology for spaceborne cloud radar applications is presented. The proposed design is manufactured utilizing high performance in-house AlGaN/GaN HEMT with 60 nm recessed T-gate technology. In the design, a 2 × 35 μm HEMT has been designed, optimized, manufactured and characterized to develop a 5-stage W-band Coplanar Waveguide (CPW) MMIC LNA. The proposed MMIC LNA has a small signal gain (S21) of an average 15 dB with sub-4.7 dB noise figure (NF) in the operating frequency bandwidth of 85–100 GHz which yields a fractional bandwidth of 16.22% at ambient temperature. The measured I/O reflection coefficients respectively are better than −8 and −11 dB while the total dissipated power is 119 mW, which yields a power-added efficiency (PAE) of 19.6%. Furthermore, the measured output power at the 1 dB compression (P1dB) is achieved 14.75 dBm at the center frequency. The proposed design has a compact dimension of 2.5 × 1.7 mm2.
125537
Amit Yadav, Akanksha Gautam, Gyanendra Sheoran, Amit K Agarwal and Rakesh Kumar Singh
We present a technique for generating vortices of variable topological charges in the short-wave infrared (SWIR) at 1550 nm by structured binary pinhole masks. Binary pinhole masks, fabricated using lithography followed by a wet etching process, are designed to modify the phase profile and generate optical vortices with tailored topological charges. We experimentally analyse the amplitude and phase distributions of the generated beams, demonstrating the formation of a characteristic doughnut-shaped intensity profile and helical phase. Vortex beams with superimposed opposite topological charges, commonly called photonic gears, are also generated and detected within the framework of the proposed model. Furthermore, we demonstrate that the topological charge of photonic gears varies with the propagation distance. Our results demonstrate the effectiveness of this technique in the SWIR regime, paving the way for further advancements in the generation of vortex beams. The binary masks straightforward design and the topological charge’s adaptable control are expected to encourage practical applications of the vortex beam.
125538
Haibo Yu, Hongshun Liu, Xuehong Sun, Liping Liu, Guoche Qin and Yanpeng Zhang
Dynamic manipulation of electromagnetic (EM) waves with multiple degrees of freedom remains a significant challenge in the field of electromagnetic control. To address the requirements for multifunctionality and tunability of metasurfaces, this paper proposes a full-space terahertz wavefront dynamic control structure based on a thermally induced phase transition metasurface. The metasurface is composed of high-refractive-index silicon nanocolumns, a polytetrafluoroethylene (PTFE) dielectric layer, and a vanadium dioxide (V O2) thin film with reversible phase transition characteristics. Through precise design of the unit geometric structure, independent wavefront manipulation in reflection and transmission modes is achieved. Simulation results show that the metasurface exhibits a transmission amplitude greater than 0.8 in the 1.45–1.59 THz frequency band and a reflection amplitude exceeding 0.8 in the 0.85–1.29 THz band, demonstrating the superior performance of the metasurface unit structure. By combining the Gerchberg-Saxton algorithm, this study realizes full-space orbital angular momentum (OAM) beam generation and high-quality holographic image reconstruction. Furthermore, the metasurface is successfully applied to encrypted communication, enhancing information security. This work presents a thermally reconfigurable metasurface platform that enables independent full-space wavefront control in both reflection and transmission modes, a capability not achieved simultaneously in previous studies. Unlike existing designs that typically operate in a single mode or lack dynamic tunability, our approach integrates V O2-based thermal phase transition with H-shaped silicon nanocolumns, achieving bidirectional OAM generation, high-quality holographic imaging, and multi-channel encryption within a single compact structure. This new multifunctional solution offers significant advances in terahertz wave manipulation and opens up possibilities for secure, reconfigurable THz photonics in various applications.
125539
Chaojie Jiang and Shaohua Tao
A self-healing beam is one that can gradually reconstruct its light field through free-space propagation after being partially obstructed. The first discovered self-healing beam is the Bessel beam, which can be generated by a single-ring structure. It has also been demonstrated that optical beams generated by concentric multi-ring structures exhibit self-healing properties. However, the self-healing properties of optical beams generated by non-concentric multi-ring structures (NCMR beams) have not yet been explored. In this paper, we theoretically and experimentally demonstrate the self-healing properties of NCMR beams, indicating that ring structures provide a general structural basis for generating self-healing beams. Specifically, self-healing beams can be designed by engineering ring structures. We quantitatively analyze the effects of the number of rings and ring spacing on the self-healing properties of NCMR beams. The results show that both parameters have negligible effects on the self-healing capabilities of NCMR beams. In addition, we discuss the influence of obstruction-induced energy loss on NCMR beams. A higher energy loss rate leads to a longer self-healing distance. These findings provide new insights for the development of self-healing beams and expand their application potential in fields such as optical communication and particle manipulation.
125540
Guoliang Hu, Shenglong Cai, Chang Li, Wencai Zhu and Weihua Li
In order to achieve better braking torque and fast response time of the MR brake in the application areas of force feedback device systems, a small-scale magnetorheological (MR) brake featuring T-shaped rotor with meandering magnetic circuit was developed. The structure and working principle were described and mathematical model of the braking torque was derived. The simulation analysis of the MR brake was performed using COMSOL software to investigate the distributions of magnetic flux lines and magnetic flux densities in the fluid flow channels. An equivalent circuit simulation model considering the effect of eddy current was established to obtain the response time of the excitation coil. The performance test system for the MR brake was established. The experimental results show that the proposed MR brake can output a large braking torque with a fast response time, which meets the requirements of the force feedback device. Finally, a force feedback device with the proposed MR brake was designed, and experiments were conducted to measure the feedback force at the fingertip and the angle of the grasping bending angle. The experimental results verified the feasibility of the proposed MR brake.
125541
Fulong Yang, Zhe Feng, Yongxia Zhang, Zhitao Guo, Yurui Wang, Yuqing Qi and Mengyao Cui
Traditional graphene-based metamaterial electromagnetic devices have primarily focused on tunable functionalities, while neglecting requirements for thickness, flexibility, and transparency in practical application scenarios. This paper proposes an ultra-thin, all-dielectric, flexible, and transparent absorber, which reduces the dielectric layer thickness through the coupling of patterned graphene and the central patch layer, with an overall structure thickness of 2 mm. The simulation and experimental results demonstrate that, with the variation of the external bias voltage, a dynamic tuning of the absorption peak amplitude from −38.2 dB to −4.8 dB is achieved at 16.52 GHz under x-polarized waves, and a continuous shift of the resonant frequency from 10.2 GHz to 19.1 GHz is realized under y-polarized waves. The absorption mechanism and polarization-dependent tuning principles of the multilayer coupling structure are elucidated using an equivalent transmission line model and surface current analysis. This design overcomes the limitations of traditional absorbers in application scenarios. Its ultra-thin, flexible, and transparent properties make it adaptable to complex curved surfaces, providing a new approach to microwave tuning and the multifunctional integration of electromagnetic devices and electronic components.
125542
Baojun Chen, Tianyu Jiao, Zhenglin Yuan, Yanjie Ju and Yanbing Xue
Polarisation converters frequently encounter limitations, such as restricted flexibility and instability under oblique incidence, which impede their application in radar cross-section (RCS) reduction on conformal surfaces. To overcome issues of narrow bandwidth and a diminished polarisation conversion ratio (PCR) at large incident angles, this study proposes a flexible linear polarisation converter characterised by a simple structure and wide angular stability, designed for operation in the microwave band. The converter comprises a trilayer configuration: the top and bottom layers consist of metallic copper, while the intermediate layer is fabricated from polydimethylsiloxane (PDMS), which functions as the dielectric substrate. Through careful optimisation of the dimensions of the square metallic patches, the structure generates three distinct resonance points, thereby substantially extending the polarisation conversion bandwidth. Simulations demonstrate that the converter efficiently transforms x-/y-polarised incident waves into their orthogonal counterparts over the frequency range of 7.3–15.69 GHz, achieving a PCR exceeding 90%, a result further corroborated by experimental measurements. Furthermore, the metasurface is applied to RCS reduction by constructing a 20 × 20 chessboard array based on the proposed unit cell. The resulting configuration attains an RCS reduction of up to 10 dB within the 7.3–15.5 GHz frequency range.
125543
Surya Prasath C and Richards Joe Stanislaus
Millimetre waves have been widely adopted in portable radar, security systems, communications, and various other fields. The limit of wireless communication capacity is driving the development of millimetre-wave frequency technology. 6G communication necessitates the use of D-band for point-to-multipoint backhaul communication. This work introduces a slow-wave structure (SWS) architecture for backhaul communication using a folded-waveguide (FWG) travelling-wave tube amplifiers (TWTAs). TWTAs’ higher bandwidth makes them the best vacuum electron devices for millimetre wave amplifiers. In this work, the dimensional aspects of each variable parameter are effectively analysed and are employed in the computation of interaction impedance for effective beam-wave interactions. The preliminary dispersion analysis achieved 18% bandwidth in the D-band from 137 GHz to 163 GHz. The phase velocity in the operating bandwidth of the FWG SWS is 0.242 times the speed of light as obtained from the dispersion (eigen-mode) analysis. To obtain increased interaction impedance, a square cross-section beam tunnel with a circular electron beam and a tunnel filling ratio of 65% is used. The operational bandwidth allows for an interaction impedance of up to 11 ohms. Using an electron beam with 15.42 kV beam voltage and 50 mA beam current, the particle-in-cell (PIC) simulations yielded output levels of up to 15 dBW at 150 GHz, with a maximum gain of 27 dB. The effectiveness of this work, in comparison to the previous work, is discussed following the performance of the output power for different input power levels. Chamfering and surface roughness effects on RF loss and transmission are analyzed, and sensitivity studies show that axial magnetic field and beam voltage variations strongly impact gain and beam-wave synchronism.
125544
Ibtissam Bahlaouane, Abdessalam El Yassini, Abdelfettah Belhabib, Saida Ibnyaich and Abdelouhab Zeroual
This paper presents a compact octagonal star-shaped patch antenna optimized through Ant Colony Optimization for Continuous Domains (ACO
) for enhanced UWB performance. The proposed antenna design incorporates strategically placed slots in both the radiating patch and ground plane, with ACO
simultaneously optimizing multiple critical parameters: slot dimensions, feed line positioning relative to the radiating element, and ground plane length. This automated optimization approach enables an efficient exploration of the search space, leading to an optimal antenna configuration that maximizes bandwidth, reduces physical size, and enhances overall performance. The optimized antenna, with compact dimensions of 24 × 28 × 1.6 mm3, achieves an impressive operational bandwidth ranging from 2.3 GHz to 16 GHz, corresponding to a fractional bandwidth of 149.73% while maintaining reflection coefficients below -10 dB throughout the bandwidth. A miniaturization rate of 64.4% is achieved by combining an optimized partial ground plane with slots introduced in both the radiating element and the ground plane, all of which effectively lower the resonant frequency without increasing the antenna footprint. Moreover, the antenna design exhibits excellent radiation performance, including a peak gain of 5.8 dB and a consistent radiation efficiency of approximately 85%. These findings demonstrate that ACO
-driven optimization provides an effective strategy to achieve UWB performance in a compact geometry, reducing the need for manual adjustment and speeding up the design process. Given its broad impedance bandwidth, stable radiation characteristics, and compact size, the proposed octagonal star-shaped antenna is a strong candidate for diverse applications such as UWB systems, Internet of Things (IoT) devices, WLAN and WiMAX systems, and 5G Sub-6 GHz communications, as well as C-band and X-band radar systems.
125545
Atheena Pramod, Anurag Kumar Singh, J Kawya, T C Sabari Girisun and Nagalakshmi R
This work presents the synthesis and characterisation of electrospun 2-Naphthol incorporated poly(methyl methacrylate) (PMMA) fibers at four different concentration ratios. We were interested in the concentration effects on the morphology, structural properties, tensile strength, and linear and nonlinear optical properties of the fibers. The results show that the concentration of 2-Naphthol inside PMMA fibers affect their morphology, leading to a branching structure with increase in concentration. Based on the results obtained, we are able to identify the best concentration ratio at which the fibers exhibit reverse saturable absorption properties with minimum optical limiting threshold values for nonlinear optical applications. This also brings light to the fact that how much each spinning parameter, like high voltage, flow rate, collector rotation speed etc influences the synthesis of fibers. Further, at a particular concentration, the fibers were found to exhibit a switching behaviour from saturable absorber at intensities (1.23–2.46 × 1012 Wm−2) to reverse saturable absorber at intensity (4.92 × 1012 Wm−2). The nonlinear absorption coefficients were calculated, and the optical limiting threshold was also found. So, the best concentration ratios to obtain 2-Naphthol—PMMA fibers were identified and at which they found applications in pulse shaping and laser safety devices.
125546
The following article is Open access
Abdelaziz Ould Bahammou, Monia Najjar and Abdesselam Hocini
Timely diagnosis of diabetes is vital for averting its microvascular complications. In this study, we compare two new design biosensors based on photonic crystals with silicon (Si) and gallium arsenide (GaAs), our biosensors for monitoring the concentration of glucose in urine, to identify and treat diabetic kidneys as soon as possible. The first suggested biosensor was composed of air hole submerged in Silicon and the second consisted of an air hole immersed in gallium arsenide (GaAs), our sensors are simulated using the plane wave expansion (PWE) to detect the photonic bandgap and Finite difference time domain (FDTD) to develop and analyse the behavior field distribution spectra. The silicon biosensor has achieved a high quality factor of 5274.4, a high sensitivity of 1075 nm RIU−1, 100% of transmission efficiency while the GaAs biosensor has arrived the highest quality factor of 5477.5, a sensitivity of 700 nm RIU−1, normalized transmission of 100%. For both design, the results reveal their ability to operate with tiny samples, offer low fabrication costs, and can be seamlessly integrated with other electronic component used in diagnostic medical systems.
125547
Guijiang Liu, Xingbao Lyu, Yiqun Ma, Chengxun Yuan, Zhongxiang Zhou and Kudryavtsev Anatoly
Superparamagnetic materials break the Snoek’s limit of ferromagnetic materials, offering significant potential for the design and development of broadband microwave-absorbing metamaterials. This study presents the design and fabrication of a novel metamaterial with a periodic truncated pyramid structure, based on superparamagnetic Fe3O4 nanoparticles/hollow glass microspheres/epoxy resin composite (Fe3O4NP/HGS/EP). By optimizing the fabrication process and geometric structure, the proposed material achieves effective ultra-wideband electromagnetic wave absorption across the entire C-band and X-band, with an absorption rate exceeding 90%. Experimental validation confirms the exceptional electromagnetic absorption performance of the composite material, which is primarily attributed to the synergistic effects of superparamagnetic relaxation, multiple electromagnetic loss mechanisms, and the significantly improved impedance matching enabled by the gradient structure.
125548
Haoyi Deng, Xincheng Huang, Hui Zhang, Manlin Yu, Weisen Peng, Huahao Huang, Kunhua Wen and Miao He
Malachite green (MG), a synthetic organic dye, is widely used across various industries as a colorant and antimicrobial agent. However, its toxic and carcinogenic properties have caused severe environmental impacts. As a typical metal–organic framework (MOF) material, zeolitic imidazolate framework-67 (ZIF-67) has remarkable adsorption capacity for MG due to its large specific surface area and high porosity. In this work, we developed a high-performance MG sensor using ZIF-67 as a sensitizing layer to modify a prism-type SPR configuration for highly sensitive and specific detection of MG dyes via drop-casting. The performance of the sensor was related to the amount of ZIF-67, which could be controlled by adjusting the number of drop-casting cycles. Experimental results demonstrated that the sensor exhibited favorable selectivity toward MG, with a sensitivity of 0.173 nm (μg ml−1)−1 and a limit of detection (LOD) of 9.364 μg ml−1, and a robust linear correlation over the concentration range of 20–120 μg ml−1. This enhanced performance shows significant superiority over bare gold-based SPR sensors. Furthermore, compared to other interfering substances at similar concentrations, the ZIF-67-sensitized sensors demonstrated significant SPR resonance wavelength shifts specifically for MG, thereby confirming the sensor’s exceptional sensitivity and selectivity for MG detection.
125549
Praveen Chaurasia, Usha Sharma, Vinayak Soni and Mukesh Kumar Khandelwal
This study presents the design of the metamaterial unit cell, and its electromagnetic characteristics are verified with its measured results. The proposed metamaterial design offers double-negative (DNG) properties over six distinct operating bands, with a lowest frequency ratio of 1.06:1. The DNG behaviour, observed in a FR4 epoxy dielectric substrate, is analysed through the extraction method of its well-known characteristics. The proposed hexa-band capable unit cell can be effectively used in Bluetooth and Wi-Fi (802.11b/g/n) by its 2.4 GHz operating band; RADAR and satellite systems at 3.5 GHz, base stations at 6.4 GHz; weather and microwave links at 6.8 GHz; spacecraft tracking systems at 7.4 GHz; and radio astronomy at 8.2 GHz. Both results from simulation and measurement show good agreement with each other.
125550
Hassan Pakarzadeh and Samira Hashemi
Fiber optical parametric amplifiers (FOPAs) are versatile devices widely utilized in various applications, particularly for high-gain signal amplification over a broad bandwidth. To date, phase-sensitive one-pump (PS-1P) and degenerate phase-sensitive two-pump (PS-2P) amplifiers have been studied. In this paper, for the first time, we investigate gain engineering in non-degenerate PS-2P FOPAs by employing a six-wave model and solving the coupled-mode equations using the Runge–Kutta method. We present a numerical model to simulate the gain spectrum and wave evolution in PS-2P FOPAs and compare these results with those of phase-insensitive (PI) FOPAs. First, we examine the impact of the input relative phase on the gain spectrum of two-pump (2P) FOPAs using both the basic four-wave model and the more comprehensive six-wave model. Then, we simulate the evolution of the pump and signal waves along the optical fiber and compare the performance of 2P-FOPAs in both PS and PI operation modes. Our results demonstrate that PS-2P FOPAs can be engineered to achieve higher gain levels and smoother gain profiles than their PI counterparts, provided an appropriate relative phase is applied at the fiber input. These findings suggest new applications in fiber-optic communication systems, enabling engineerable high-gain amplification with a minimized noise figure.
125551
Han Han, Shao-bo Liu, Yi-yu Yue, Yong-chao Zheng, Jing-yu Zhao and Zhi-qiang Fan
In recent years, radiative cooling, as an energy-free and renewable cooling technology, has undergone extensive and in-depth research and development. However, current research on radiative coolers with high-performance metamaterials structures remains relatively limited. In this paper, through simulation and analysis, we conducted a comparative study on the performance of radiative coolers with planar multilayer film structure and radiative coolers with metamaterials structure. In the research, we first investigated the performance of radiative coolers with planar multilayer film structure. Subsequently, on the basis of the Si3N4/SiO2/Si3N4/Ag planar multilayer film structure, we constructed periodic cylindrical array structure, which effectively enhances the performance of the radiative cooler. Finally, we further replaced the periodic cylindrical array structure with periodic square prism array structure to explore the impact of structural morphology changes on performance, and ultimately completed the design of high-performance daytime radiative cooler. Through structural optimization, the radiative cooler model studied in this paper exhibits high reflectivity in the solar spectrum band and high emissivity in the atmospheric window band. The results showed that the optimized device can achieve excellent radiative cooling performance under conventional solar radiation conditions, providing an effective technical approach for the practical application of daytime radiative cooling.
125552
Radha Sharma, Shweta Srivastava and Rajesh Kumar Vishwakarma
This research presents a miniaturized multi-band enhanced gain antenna using frequency selective surface (FSS) for sub-6GHz and X-bands with minimum in-band applications interferences. The antenna comprises an array of slits (inner, middle, and outer slits) in the rectangular patch with U-stub loading. The introduced slits array makes the antenna dual-wideband while U-stub loading makes the reflection coefficient tri-band. The inner slit and ground slots combine to fine tune the antenna’s lower frequency to 3.5 GHz. The tri-band antenna attain gains of 5.39, 6.13, and 8.39 dBi, respectively. A 15 metallic-strip FSS is introduced to enhance the gain without disturbing the tri-band nature and resonance frequencies of the main antenna. The antenna with FSS achieves tri-bands 3.13–4.15 GHz (S-band), 4.38–6.23 GHz (C-band), 7.78–8.90 GHz (X-band) with enhanced gain values 7.11, 7.25, and 9.66 dBi at resonance frequencies 3.48 GHz, 5.36 GHz, and 8.44 GHz, respectively. Antenna miniaturised to 65.60% in size compared to the conventional rectangular patch antenna designed at 3.5 GHz. The overall volume of the multi-layered antenna is controlled by air-gap between antenna and FSS substrates. After parametric investigation the antenna simulation results are measured using vector network analyzer (VNA: Anritsu S820E) and anechoic chamber and are found in concords. The antenna is most suitable for HiperLAN (5.15–5.925 GHz), Wi-MAX (3.5 GHz), Wi-Fi5, S-band (cordless phone, weather RADAR), C-band (satellite communications, microwave links, RADAR systems, satellite-based internet services), X-band (police radar, military radar, satellite communications, space research, military communications), and 5G sub-6 GHz (n46, n77, n78, n79) bands applications.
125553
Ziad Abu Waar, Abdelkader Nassour, Malika Kandouci and Mohamed Moustafa
Enhancing the performance of CIGS-based solar cells with environmentally friendly materials is a crucial step toward advancing their industrial application. This study explores the replacement of the conventional toxic CdS buffer layer with a non-toxic, earth-abundant transition metal dichalcogenide (TMDC), specifically ZrSxSe2−x(where 0 ≤ x ≤ 2). The impact of the material’s composition (x), along with various physical and electrical parameters such as layer thickness, donor density, and bulk defect density, on the solar cell’s performance was thoroughly investigated. The newly optimized configuration was compared to a highly efficient CIGS based solar device, which holds a world-record efficiency of 22.6%. The optimal sulfur content was identified at x = 1.0, resulting in a conversion efficiency of approximately 23.12%. These results highlight the potential of ZrSxSe2-x as a viable, non-toxic alternative to CdS for application as a buffer layer in CIGS solar cells, combining both environmental benefits and performance enhancements.
125554
Yajun Xu, Jun Zhao, Yien Zhang, Jinjie Zheng and Luanhong Sun
Reliable encapsulation materials are essential for ensuring the long-term stability of high-efficiency Tunnel oxide passivated contact (TOPCon) photovoltaic (PV) modules. In this work, a nano-engineered EVA (nano-EVA) encapsulant incorporating 2 wt% SiO2 nanoparticles was developed and systematically compared with conventional EVA and Polyolefin Elastomer (POE). The SiO2 incorporation reduced the water-vapor transmission rate to 38% of its original value, effectively suppressing moisture ingress and mitigating electrode corrosion. As a result, nano-EVA encapsulated modules exhibited only 0.65% power loss after 2000 h of damp-heat aging (85 °C/85% RH) and a potential-induced degradation (PID) efficiency loss of 0.8%, significantly lower than that of EVA and POE counterparts. Mechanical testing revealed a tensile strength of 26.3 MPa, representing an improvement of approximately 32.8% over EVA, while maintaining high adhesion and optical transparency. These results demonstrate that nano-EVA achieves a favorable balance between mechanical reinforcement, barrier performance, and light transmittance, offering a cost-effective and high-performance alternative encapsulant for next-generation TOPCon PV modules.
125555
Sanjeev Sharma, Aarti Bansal, Geetanjali Singla and Rajeev Kumar
The work proposes a low-profile, wideband circularly polarized (CP) dual-element Multiple-Input-Multiple-Output (MIMO) antenna design for C-band and selected 3GPP FR1 5G NR bands. The designed two-element MIMO antenna utilizes a planar patch configuration and achieves high isolation by strategically incorporating an optimized rectangular-shaped slot in the ground plane of the antenna, which acts as a decoupling structure, eliminating the need for any external complex structure. The two MIMO elements are placed with an optimized decoupling slot of 7 mm width to reduce mutual coupling between them. The performance of the proposed CP-MIMO antenna has been validated comprehensively through both full-wave simulations and experimental measurements. The antenna demonstrates a measured −10 dB impedance bandwidth of 3.81 GHz (4.24–8.05 GHz) and a 3-dB axial ratio bandwidth (ARBW) of 2.7 GHz (4.36–7.06 GHz), validating CP performance. The key MIMO parameters investigated include Total Active Reflection Coefficient (TARC < −10 dB), Envelope Correlation Coefficient (ECC < 0.005), Diversity Gain (DG ≈ 9.98), and Channel Capacity Loss (CCL ≈ 0.35 bits s−1 Hz−1), confirming its excellent diversity standards. The proposed CP MIMO antenna occupies a compact footprint of 49 × 24 × 1.6 mm3, with better inter-element isolation of more than 20 dB across most of the operating band, a peak gain of 5.7 dB, high simulated efficiency of 96%, and polarization agility. Furthermore, the scalability of the design has been comprehensively demonstrated by extending it to 3-port and 4-port MIMO configurations, supported by detailed simulation results. These results validate its suitability for integration into next-generation wireless communication systems.
125556
Abdullah Ali Alansi, Tauqeer Haidar Qamar, Sibt ul Hassan, Nouman Ahmed, Sain Bux Jamali, Khadija Kousar, Pengkun Xi, Lianwen Deng and Shengxiang Huang
This study presents a simple and effective hydrothermal method for synthesizing hierarchical cobalt-nickel (CoNi/CFs) composites for use as microwave absorbers. The unique structure features CoNi bimetallic nanoparticles uniformly embedded within a carbon matrix and decorated on the surface of interconnected carbon fibers. This architecture provides a high surface area and multiple interfaces, which are key to enhancing electromagnetic wave absorption through polarization and scattering losses. The results are highly promising. The material achieves a minimum reflection loss (RL min ) of −50.46 dB with a thin absorber thickness of only 1.7 mm. It also demonstrates a wide effective absorption bandwidth (EAB) of 5.92 GHz at a thickness of just 1.9 mm. This superior performance is a result of the synergistic effects of the hierarchical structure, excellent impedance matching, and multiple loss mechanisms, including both dielectric and magnetic losses. Our work offers a promising, lightweight, and high-performance solution for microwave absorption, with potential applications in stealth and anti-interference technologies
125557
Qiyue Zhu, Ruilong Li, Zhibiao Xu, Longhui Xiong and Tao Wang
The rapid development of 5G technology has created an urgent need for efficient electromagnetic wave absorption in the millimeter-wave band under multi-angle incidence. However, the performance of existing absorbers was mostly characterized in the range from 2–18 GHz and under normal incidence, limiting their applicability in the millimeter-wave band and near-field environment. In this study, we developed a polyurethane-based composite containing FeCo alloy nanoparticles (Fe:Co ≈ 1:3) with large magnetic loss in the Ka band, achieving full Ka-band absorption under TM polarization from 0 to 60° and TE polarization from 0 to 45°. To enable a quantitative assessment of the absorption performance under wide-angle incidence, a Multi-Angle Absorption Level (MAAL) strategy was proposed, providing a robust and concise evaluation of the absorption performance under the full angular range. The proposed material and the method offer an effective strategy for designing and benchmarking advanced broadband absorbers in the Ka-band and near-field environment.
Plasma physics and fusion
125601
Pawandeep Singh, Prince Kumar and Shantanu Kumar Karkari
We present a study on the dynamics of a collapsing positive ion sheath by applying a train of negative voltage pulses around a cylindrical wire probe. In order to investigate the temporal evolution, we use a microwave hairpin resonator probe to estimate the average electron density. We observe that when the cylindrical ion sheath collapses, the average electron density first increases with the rise time of the voltage pulse, which is then followed by a slower recovery phase until saturation. The collapse of the sheath is initially driven by radial influx of neutralizing electrons, leaving behind a quasi-neutral plasma with a finite radial density gradient. This gradient is gradually smoothed out as the adjacent bulk plasma expands over the positive ion response time. We also present a diffusion model to corroborate the experimental observations, which demonstrate quantitative agreement. It is shown that the model can serve as a reliable tool for estimating key plasma parameters, including the diffusion coefficient, density profile, and positive ion temperature within the discharge.
125602
Xilai Hu, Jingwen Huang, Zhongping Qu, Youpeng Huangfu and Renwu Zhou
Extensive quantities of antibiotics have been released into surface and groundwater systems through various sources such as aquaculture, medical, and chemical wastewater. This has led to the spread of antibiotic resistance genes, resulting in multidrug resistance in pathogenic bacteria and posing risks of chronic toxicity, mutagenicity, carcinogenicity, and teratogenicity. Therefore, efficient degradation methods for antibiotics in wastewater are essential to protect human health and ecological safety. Among current wastewater treatment technologies, non-thermal plasma technology has gained significant attention due to its low cost, ease of operation, and lack of secondary pollution. However, challenges such as low energy efficiency and inadequate utilization of key liquid-phase reactive species persist. In this study, a highly efficient plasma bubble reactor equipped with a nanosecond pulsed power supply was employed to degrade tetracycline hydrochloride (TCH) wastewater. Under the same discharge power, two discharge modes (spark discharge and dielectric barrier discharge (DBD)) were investigated with the introduction of different gases (air, argon, nitrogen). The results indicate that the DBD air mode exhibited the highest degradation efficiency (90.8% degradation in 10 min), with the highest energy yield (3.39 g kWh−1). Further investigation into the optimal DBD air mode was conducted to evaluate the effects of gas flow rate, discharge voltage, discharge frequency, and solution properties on the degradation of TCH. Optimization studies revealed that TCH degradation was maximized at a gas flow rate of 1000 sccm, 12 kV discharge voltage, and 5 kHz frequency (specific to the experimental setup used in this study). Key active particles involved in the degradation mechanism were analyzed through scavenger experiments, indicating that superoxide radical (·O2−) plays a critical role in TCH degradation. Preliminary biocompatibility tests using mung bean germination suggest the feasibility of discharging treated water back into the environment.
125603
Jinwei Bai, Hongbin Zhuo, Zengjie Gu and Yong Cao
Accurately simulating the plasma distribution within the discharge chamber is essential for the development and performance optimization of Kaufman-type ion sources. The temperature of secondary electrons plays a critical role in plasma diffusion. However, it is often oversimplified and assumed to be constant. This study presents a three-dimensional physical model for Kaufman-type discharge processes that explicitly incorporates the energy conservation equation for secondary electrons. The model is solved using a fully decoupled two-layer iterative scheme, in which the primary electrons are treated as discrete particles and the plasma is modeled as a quasi-neutral fluid. Compared with the previous three-dimensional hybrid model (Lu C, Wan J, Cao Y, and He X-M. 2020 A fully decoupled iterative method with three-dimensional anisotropic immersed finite elements for kaufman-type discharge problems. Comput. Method. Appl. M.372 113345), which assumed a uniform electron temperature, the present work introduces a self-consistent treatment of the secondary electron energy equation. This improvement enables the spatially varying electron temperature Te(x) to be determined dynamically from the balance of Joule heating, anisotropic thermal conduction, and collisional energy loss, rather than being prescribed as a constant. Validation against experimental measurements of the LIPS-300 ion thruster demonstrates that the simulated beam current agrees closely with observations, reducing the relative error from 3.0% in the original model to 1.0% under the 4kW condition. Overall, the proposed model provides a more accurate and physically consistent representation of Kaufman-type discharge phenomena, offering a valuable computational framework for the design, analysis, and performance optimization of ion sources.
125604
Hadeer El-Hawary and Mazen Abdel-Salam
The charge simulation method (CSM) was first introduced for field calculation in high-voltage (HV) arrangements involving electrodes and two dielectrics at most. Each electrode is simulated by a set of charges inside it. The interface between the two dielectrics is simulated by two sets of charges, one set in each dielectric. The proposed method aims to extend the CSM for the first time to apply to arrangements with many electrodes and multi-dielectric layers. This represents the novelty of the method. Its intelligence lies in the proper selection of the simulation charges to be used for calculating the electric potential and field anywhere within the HV arrangement, following a systematic procedure. The method predicts potential and field values that coincide with their respective exact values in a single-core cable with multi coaxial-dielectric layers. For a dielectric-barrier discharge (DBD) arrangement having multi parallel-flat-dielectric layers with and without embedded electrodes, the method also predicts potential and field values that agree reasonably with those obtained using COMSOL software. The effectiveness of the embedded electrode in decreasing the field at the edge of the stressed electrode is verified by the proposed method in agreement with the experimental observations recorded for the investigated DBD arrangement.
125605
Zhiwen Yang, Jiawei Li, Chuan Li, Qixiong Fu, Ming Zhang, Kexun Yu and Dingchen Li
Droplet coalescence plays an important role in multiphase flows, with broad implications in atmospheric science, industrial separation, and advanced manufacturing. Applying electric fields and charges is an effective way to regulate droplet collision and coalescence dynamics. This study models two-phase flow to explore the coalescence dynamics of charged-neutral droplet pairs under asymmetric initial configurations influenced by electric fields and charges. It indicates that under a uniform electric field, charged-neutral droplet pairs exhibit four coalescence motion modes: direct coalescence, rotational coalescence, rotation without coalescence, and no rotation or coalescence. It also examines the dependence of coalescence modes on initial angle θ and spacing L, providing detailed distribution maps for each mode. The direct coalescence region lies in the lower-left of the L/d−θ phase diagram, with boundary following θ ∝ (L/d)−1. The non-coalescence region is in the upper-right, including rotational and non-rotational states, and rotational coalescence is an intermediate state. Smaller initial angles favor direct coalescence, while larger angles lead to other modes. Larger initial spacing lowers the initial angle needed for direct coalescence, with all modes shifting to smaller angles. When the electric field or charge ratio decreases, the initial angle regions for each mode shift to larger angles, with direct coalescence occurring over a broader range. These findings offer key parameter references for actively controlling droplet behavior in engineering applications like aerosol purification and crude oil dehydration.
125606
Yong Wook Lee and Jaehoon Jung
We propose, for the first time, a powerful reliability-based optimal design approach of plasmonic devices based on extraordinary optical transmission using Q factor analysis. The proposed method is applied to an optimization of a plasmonic filter composed of a periodic slit array with multiple stochastic constraints. It utilizes the reliability index approach for the reliability analysis of these constraints and employs Q factor analysis to significantly improve computational efficiency. As a measure of performance reliability, we evaluate the failure probabilities of stochastic constraints by assuming statistical distributions of design variables due to manufacturing tolerances, which are unavoidable in nanostructure fabrication. This computationally effective approach can be applied to the reliability-based design optimization of periodic nanostructure arrays to improve performance while reducing probability of defects in mass production. This approach facilitates a tractable reliability-based design optimization process, particularly for multi-slit plasmonic structures, where the conventional evaluation of bandwidth—through full-spectrum transmission analysis—is a primary contributor to excessive computational cost, rendering traditional reliability-based design optimization methods practically infeasible.
125607
Zheng-yuan Li and J X Ma
Dusty plasma diffusions were proposed to simulate plasma response to short-scale aerosol density non-uniformities, leading to small-scale electron density structures that are closely connected to the phenomenon of polar mesosphere summer echo (PMSE). In previous diffusion models, photoelectron emission from aerosols caused by metal contamination has not been considered. This paper develops a dusty plasma diffusion model that incorporates both aerosol growth and photoelectric effect. It is shown that the photoelectron emission reduces the negative charge on aerosols, significantly influencing electron and ion density structures. Under conditions of strong photoelectron emission combined with large aerosol radii, the average dust charge may even be positive, leading to a positive correlation between electron and dust densities, which may potentially influence the formation of PMSE.
125608
Yongzhi Shi and Tongjun Xia
A tungsten (W) film and a series of tungsten-containing high entropy alloy (HEA) films were fabricated via the magnetron sputtering technique. The HEA films included WTaCrV, WTaCrVTi, and WTaCrVZr. The microstructural features were evaluated using grazing incidence x-ray diffraction (XRD). For the WTaCrVZr HEA film, with the larger atomic size Zr element as the focus of study, EDS elemental composition ratio analysis was conducted. Pure W thin film served as a reference sample, and transmission electron microscopy (TEM) was used to observe the characteristics of helium bubbles exposed to helium plasma. The findings reveal that the helium bubbles in the WTaCrVZr HEA film are more narrowly distributed and smaller in size. The desorption behaviors of deuterium and helium were evaluated by thermal desorption spectrum (TDS). The results indicate that deuterium release from the HEA film occurs more readily compared to the pure W film. In addition, the total deuterium retention in pure W film and three types of HEA films was compared. It was found that the WTaCrVTi HEA film exhibits the highest deuterium retention, approximately three times that of the WTaCrV HEA film and thirty times that of the pure W film.
125609
Bingqi Guo, Yue Yu, Chen Zhang, Qingquan Yang, Lingyi Meng, Kai Wu, Yanmin Duan, Liang Wang, Chaofeng Sang and Dezhen Wang
Impurity injection is widely employed to promote divertor detachment and mitigate thermal loads on divertor target. Nevertheless, it can also induce impurity transport to the upstream region and accumulation near the X-point, potentially degrading core plasma performance and confinement. Neither experimental costs nor computationally-intensive simulations are capable of evaluating the physical processes of interest in a timely manner. Therefore, there is an urgent demand for data-driven models that can rapidly estimate divertor and upstream plasma states under various discharge conditions. In this work, a database of 8000 samples is constructed from recent EAST discharges by using temporal window movement and related preprocessing. A multi-task Cascade Neural Network Model (CASNN) is trained using the dataset. The results demonstrate that under various operational conditions, the CASNN model can rapidly predict both the electron temperature at the outer divertor strike point (
) and the radiated power distribution near the X-point. Meanwhile, the model predictions exhibit reasonable agreement with experimental measurements, consistently achieving an R2 value exceeding 0.7. Moreover, the model captures notable differences between impurity species in their radiative effects. At the same injection rate, argon decreases the electron temperature at the target by more than four times compared to nitrogen, and its contribution to X-point radiation power is about 70% higher than that of nitrogen. These findings highlight the strong coupling between divertor states and upstream radiation behavior, providing valuable insight into plasma response under impurity injection.
125610
Amar P Misra, Num P Acharya, Suresh Basnet and Raju Khanal
We reveal a new dispersive dust-lower-hybrid (DLH)-like mode that can couple to modified dust-cyclotron (DC) waves in a dusty magnetoplasma by the influence of a streaming ion beam. Previous studies have overlooked such hybrid modes and the coupling in the study of resonant cyclotron instabilities in dusty magnetoplasmas. Using two-fluid models for positive ion beams and charged dust grains, nonthermal κ-density distributions for electrons and positive ions, and orbital motion limited (OML) models for dust-charge fluctuations, we derive a general linear dispersion relation for the coupled DLH and DC modes in the limit of when the hydrodynamic time scale is much longer than the dust-charging time scale. The hybrid mode propagates with a frequency lower than the typical dust-lower-hybrid frequency,
, where ωpd is the dust-plasma oscillation frequency and Ωd is the dust-cyclotron frequency. We obtain the growth rates of instabilities due to Cerenkov and cyclotron interactions and analyze them, taking into account the influences of the static magnetic field, ion-to-electron temperature ratio, electron-to-dust number density ratio, dust-charge fluctuation, and superthermal electrons and ions. We find that the maximum growth rates tend to increase but reach steady states as the wave number increases. The instabilities reported here could be relevant to various plasma environments, including space plasmas (e.g., Earth’s magnetosphere) and laboratory dusty plasma experiments.
125611
Sanjib Sarkar
The phenomenon of Hall instability in a collisional magnetized plasma, which comprises weakly coupled electrons, ions, and strongly coupled dust particles, is presented. Consideration has been given to the effects of spatial dust charge gradients and fluctuations in dust charge. The dispersion relation is derived utilizing the fluid equations for electrons and ions, along with a generalized hydrodynamic equation for the strongly coupled dust particles. This derived dispersion relation is numerically solved for two distinct sets of laboratory-type dusty plasma parameters. In one scenario, both electrons and ions are magnetized, while in another, the ions are unmagnetized. It is observed that two types of modes generally arise. Among these, one mode operates within the ion acoustic frequency range, while the other falls within the dust acoustic frequency range. The higher frequency mode exhibits instability at elevated neutral gas pressures, where only the electrons are magnetized, and both the ions and dust particles remain unmagnetized. When both electrons and ions are magnetized at low neutral gas pressures, an unstable low-frequency mode is triggered by an increase in the coupling parameter. With the increase of the coupling parameter from Γ = 1 to Γ = 10, the low-frequency mode is notably impacted, whereas the high-frequency mode remains unaffected. In certain instances, the dust charge inhomogeneity enhances both the growth rate and the threshold of the instability. Interestingly, dust-neutral collisions, which typically exert a stabilizing effect on the growth of instability, can unexpectedly increase the growth rate when the coupling parameter equals unity, with both electrons and ions being magnetized. Analytical results have been provided to elucidate the numerical findings. These results hold relevance to the phenomena of phase transition and the melting dynamics of dust crystals in a strongly coupled dusty plasma.
125612
Jiaxin Wang, Sitong Wu, Xiaoyu Wang, Jun Li, Zhenyu Huang and Teng Hu
Considering the working principle and structural characteristics of a hydrodynamic retarder, as well as its internal flow state, a bionic design of an impeller blade was carried out. Based on the morphology of the shark skin shield, stripe non-smooth structureswas extracted. Axial or radial bionic non-smooth structures were constructed on the surface of the stator and rotor blades, and a bionic hydrodynamic retarder model was established. The braking torque at a rotor speed of 1700 rpm under full-filling condition was obtained using Computational Fluid Dynamics (CFD) calculations. The results show that the braking torque of the bionic hydrodynamic retarder with the axial strip rotor and smooth stator combination reaches 2535.51 N·m, which is 14.36% higher than that of the original hydrodynamic retarder. The internal flow of the hydrodynamic retarder was analyzed based on the results of the CFD simulation. Representative sections in the flow channel were selected for analysis to obtain the flow details in the working chamber of the hydrodynamic retarder. Under the influence of non-smooth structures, the pressure on the pressure side of the impeller blades of the hydrodynamic retarder is higher, while the pressure on the suction side is lower. The non-smooth surfaces promoted higher flow velocity and fragmented vortex structures within the system. This accelerates energy consumption and thereby increases the braking torque. The bionic non-smooth blade was fabricated via 3D printing technology, and it was combined with the rotor shell of the transparent prototype. The Particle Image Velocimetry (PIV) flow-field test was performed on a transparent prototype of the hydrodynamic retarder. The velocity and vorticity fields of the original hydrodynamic retarder and the bionic hydrodynamic retarder were compared, and the rationality of the design was verified.
125613
Hongxu Li, Ao Lai, Huihan Zhang, Shuting Yu, Bin Xiang, Yingsan Geng, Zhiyuan Liu and Jianhua Wang
Superconducting DC power distribution systems, pivotal next-generation technology for decarbonizing aircraft transportation, face significant fault isolation challenges. Liquid nitrogen, serving as coolant and insulator for high-temperature superconducting devices, demonstrated substantial arc-quenching capability. It may offer potential for robust fault-clearing solutions in superconducting networks. However, arcing in liquid nitrogen constitutes a complex multiphase phenomenon, involving simultaneous vapor-liquid-plasma coexistence. Fundamental understanding of both arc characteristics and their underlying combustion physics in liquid nitrogen remains limited. This study identifies key factors governing arc behavior in liquid nitrogen. A dedicated experimental platform acquiring synchronized electrical signals, high-speed imaging, and fluid pressure data was developed. A coupled gas–liquid evolution model was established to simulate associated fluid dynamics. Results demonstrated near-synchronization between arc voltage rise and pressure transients. Dynamic pressure changes and vapor layer development drive distinct arc voltage phases. Crucially, arc energy dominated phase-transition dynamics, while resultant vapor-liquid distribution modulated arc power dissipation through thermo-fluid interactions. This interdependence established a closed-loop coupling mechanism governing arc transient behavior.
125614
The following article is Open access
Abdelatif Gadoum, Djilali Benyoucef and Jonathan Tennyson
This study presents a numerical investigation of hydrogen production from methane using an Inductively Coupled Plasma (ICP) reactor, emphasizing the influence of the imput power on plasma characteristics and methane conversion. A two dimensional fluid model was developed and solved using the finite element method, incorporating more than 300 plasma chemical reactions to capture detailed kinetics. Simulations were performed for power levels ranginf from 100W to 700W. Results show that increasing the input power significantly enhances plasma temperature from approximately 4500K to 8200K and elevate electron density from 1.2 × 1016 m−3 to 8.9 × 1016 m−3. Consequently, methane conversion efficiency rises from 35% to about 90%, with hydrogen yield increasing by nearly 70%. These findings confirm that higher input power strengthens electron energy and collision frequency, thereby improving energy transfer and methane dissociation. The proposed modeling approach provides valuable insights for optimizing plasma assisted methane reforming and supports the development of high efficiency hydrogen production technologies.
125615
Dan Li, Junyu Wang, Huayuan Liu, Juhui Chen, Wenchao Li, Xianli Liu, Michael Zhurakov, Lapatsin Siarhei and Wenrui Jiang
Soil particles are used as medium spheres in a fixed packed bed to perform numerical simulation calculations of the plasma discharge process in soil particle gaps. In a dielectric barrier discharge (DBD) reactor using helium as the discharge gas, the effects of soil particle arrangement, discharge spacing, and soil particle dielectric constant on the electric field strength and electron density in the interstitial spaces between particles were investigated. The results showed that under uniform particle arrangement, the electric field distributed more uniformly in the interstitial spaces, but under non-uniform arrangement, the discharge effect was more pronounced. Increasing the distance between discharge electrodes weakens the polarization effect between soil particles, making discharge more difficult to occur. Soil particles with high dielectric constants enhance local electric fields, and differences in dielectric constant values affect the generation and propagation of plasma. In a DBD reactor using air as the discharge gas, the temporal evolution of plasma substance concentrations during discharge was investigated, and the types and quantities of active particles entering the soil region were determined. The results indicate that the concentration of excited-state active particles, as intermediate products, rapidly decays during the discharge process. The primary active particles entering the soil domain and participating in reactions are long-lived active particles such as O3. The tripartite reaction is the main pathway for O3 generation. The reaction rates of the main gas-phase reactions involving O3 were analyzed, along with the production and consumption pathways of key gas-phase particles involved in ozone synthesis.
125616
Z T Wang, Y H Yan, B Cui, L Xu, Z M Zhang, W Qi, S K He, B Zhang, J J Li, Z G Deng et al
Irradiation of microscale channel targets with relativistic-intensity lasers serves as an effective method for generating energetic and collimated electron beams with nC-level charge. Findings from this study demonstrate that the electron injection mechanism exhibits an saturation in the number of accelerated electrons, which is independent of channel length, rather than the continuous extraction and acceleration of electrons from the channel walls. Electron injection is predominantly shown to occur at the channel entrance within a single laser period. Dense electron bunches, which shield the laser field and suppress further injection, lead to charge saturation. This mechanism establishes a fundamental limitation on charge enhancement. A theoretical model has been developed to accurately describe the injection process and predict electron charge in channel target acceleration, with 3D simulations confirming consistent agreement across parameters. These results offer significant insights into electron injection mechanisms and facilitate the development of high-charge, collimated electron beams.
Condensed matter and materials physics
125901
Anju, Ajay Kumar, Shweta Tanwar, Sukhvir Singh, Anurag Gaur and Ranjana Jha
Ag-ZnO nanocomposites were synthesised through a cost effective, sustainable co-precipitation process, providing a scalable route towards developing improved electrode materials. Structure, morphology and surface analysis were characterized using XRD, FESEM, HRTEM, FTIR, XPS, and BET. Electrochemical tests such as cyclic voltammetry, galvanostatic charge–discharge, and potentiostate electrochemical impedance spectroscopy including Nyquist plot, demonstrate a significant improvement in charge storage within Ag-ZnO than that of pure ZnO. Ag-ZnO electrode displayed 900 F g−1 specific capacitance at 10 mV s−1 with an energy density of 22.4 Wh kg−1 due to improved conductivity and lower charge transfer resistance. These results declare Ag-ZnO to be an efficient, high performance tunable electrode material for future electrochemical energy storage devices.
125902
Hamid Reza Bahrami and Saba Khosravi
A design of a 500 nm silicon (Si) crystalline ultra-thin film solar cell based on titanium dioxide (TiO2) nanoparticles for light absorption improvement is proposed. To enhance the light transmission into the active layer, an antireflection coating (ARC) consists of indium tin oxide (ITO) and silicon dioxide (SiO2) layers, is applied in the front of the active layer. Also, hemispherical shaped TiO2 nanoparticles with desired geometric parameters are inserted into the active layer to improve the absorption probability. Finally, the optical path length is increased with applying the aluminum (Al) layer at the backside of the active layer. The designed cell offers the short current density (Jsc) and conversion efficiency (η) of 17.99 mA cm−2 and 10.89%, respectively. Compared to the conventional Si film, an enhancement of 231.5% in the Jsc and an increment about 250% in the η are obtained, respectively.
125903
Seham R Alharbi and A F Qasrawi
Herein, molybdenum sulfide (MoS2) powder ceramics, pressed into pellet form and sintered at a low temperature (200 °C) for 1 h and 20 h, are studied and analyzed for potential use in high-frequency microwave technology design. It is observed that longer sintering times lead to enhanced crystallinity (fewer defects and larger crystallites), increased grain sizes, and reduced pore density, resulting in improved electrical conductivity and a conductivity type conversion from p-type to n-type. The porosity percentage decreased from 48.5% to 39.0% as a result of increasing the sintering time from 1 h to 20 h, respectively. The donor and acceptor centers, along with the variable range hopping parameters—such as degree of disorder, hopping distance (
), hopping energy, and density of localized states near the Fermi level (
) - are found to be strongly dependent on the sintering time. Numerically,
decreased from 9.80 ×
cm3 eV−1 to 2.81 ×
cm3 eV−1 and
increased from 6.78 nm to 15.50 nm as the sintering time increased from 1 h to 20 h, respectively. Furthermore, the ceramics, when designed as antennas and evaluated through return loss and voltage standing wave ratio (VSWR) measurements in the 9.0 kHz–6.0 GHz spectral range, demonstrate strong potential for 5G/6G technology applications. Notably, the sample sintered for 1 h exhibited a main resonant frequency at 3.3 GHz, whereas the sample sintered for 20 h showed a resonant frequency at 5.46 GHz. Both devices achieved return loss values better than −40 dB, VSWR of 1.02, and bandwidths of ∼2.0 GHz, highlighting their suitability for high-frequency applications.
125904
Sandhya Y Wakhare and Mrinalini D Deshpande
Motivated by the recent trend of GaN as a sensor to detect gas molecules, we have investigated the adsorption of dihydrogen chalcogenides H2X (X = O, S, Se, and Te) molecules on pristine (g-GaN) and defective GaN sheets. We have considered Ga vacancy (Gavac), N vacancy (Nvac), and antisite defective GaN sheets. The calculations are performed using the first-principles Ab initio density functional theory with vdW correction. The type of defects in the GaN sheet influences the adsorption behavior of the system. The adsorption of H2X molecule is better for Ga vacancy (Gavac) sheet compared with pristine and other defective sheets. The adsorption of gas molecules on Gavac sheet is in the order of H2Te > H2Se > H2S > H2O. The optical analysis shows a significant variation in absorption spectra for Gavac and antisite GaN sheets in the presence of H2X gas molecules. For the Gavac sheet, the absorption spectrum shows a UV shift, while for the antisite GaN sheet, a red shift is observed in the presence of H2O/S/Se/Te molecules compared with the base system. This shows potential application towards optical sensors. To understand the sensing behavior of GaN and defective GaN sheets, we have calculated conductivity, sensitivity, and recovery time. The sensitivity for H2O and H2S molecules is higher for the Nvac sheet and for the H2Se and H2Te molecules the antisite GaN sheet shows excellent sensing behavior with a small recovery time. Our simulations would be helpful to provide an atomistic picture of the g-GaN sheet and GaN sheet with defects in the presence of the H2X molecule. The study could be useful in sensing and nanoengineering applications.
125905
A Azouaoui, S Mouchou, Y Toual, A Rezzouk, K Bouslykhane and N Benzakour
The present study investigates the structural, magnetic and electronic properties of the ternary intermetallic Fe3Pt using density functional theory (DFT) and Monte Carlo simulation (MCs). Ground state calculations indicate that Fe3Pt adopts a ferromagnetic phase and exhibits metallic behavior. The computed magnetic moments are 2.8 μB for Fe, 0.4 μB for Pt, and 2.89μB per formula unit for the total moment. The temperature dependence of free energy, entropy, specific heat, and lattice constant was examined over the range of 0-800 K, revealing that the studied compound remains stable with no observed structural transitions. MC simulations were employed to explore the magnetic behavior, revealing a ferromagnetic to paramagnetic transition at a critical temperature (TC) of approximately 460 K. Additionally, the magnetocaloric analysis demonstrates that the compound exhibits a relatively large value of relative cooling power of about 110.99 J/K under an applied external magnetic field of 5T.
125906
Sunita Saharan, Anjumun Rasool, Manzoor Ahmad Dar and Shweta Meena
125907
A S Larionov, Yu Zh Tuleushev, E A Zhakanbaev and A S Dikov
This paper presents the results of synthesis and annealing modification of Be–Ti system coatings. Data were obtained on the changes in surface morphology, phase composition, and physico-mechanical properties of the coatings as a function of stoichiometric composition and isochoric annealing. The main objective of the study was to determine the behaviour of the Be–Ti alloy under thermonuclear reactor conditions. The coatings were deposited by DC magnetron sputtering onto samples of austenitic stainless steel. Coating samples containing 68–97 at% Be were obtained. Annealing was carried out at temperatures typical for the first wall of a fusion reactor (the plasma-facing surface). The newly obtained data made it possible to draw conclusions regarding the redistribution processes of elements in the titanium beryllide surface under exposure to fusion plasma. Moreover, the previously predicted Be3Ti phase was experimentally observed for the first time.
125908
Hadi Owlia, Mohammad Bagher Nasrollahnejad and Hossein Kamali Ardakani
We investigate the impact of two intra-layer Stone–Wales defects—ridge-like (SW1) and groove-like (SW2)—on the electrical performance of phosphorene nanoribbon tunneling field-effect transistors (TFETs). Transport and local-density-of-states analyses were performed within a Slater–Koster quasi-empirical framework parameterized from DFTB–CP2K. The simulations show that the SW1 defect reduces the off-state current (IOFF) by depleting conduction-edge states at the source–channel interface and suppressing band-to-band tunneling, whereas the SW2 defect increases IOFF by introducing or repositioning conduction-edge states that overlap the source–drain window and facilitate leakage. The on-state current (ION) is degraded to a comparable degree in both defected configurations, so that SW1 yields an improved ION/IOFF ratio relative to the pristine ribbon while SW2 reduces it. Dynamic metrics are similarly defect-sensitive: both SW1 and SW2 reduce the cutoff frequency (fT), but SW2 produces smaller intrinsic delay (τ) and the lowest power–delay product (PDP) under the examined bias conditions, indicating a trade-off between reduced switching energy and increased leakage. These atomistic, defect-dependent effects highlight the importance of defect topology in determining leakage, drive, and high-frequency performance of phosphorene nanoribbon TFETs and motivate defect-aware device optimization strategies.
125909
The following article is Open access
Ping Wu
We develop an entropic extension of the Heisenberg uncertainty principle that unifies spatial and temporal domains through a covariant tensor linking structural and optical entropy. Structural entropy quantifies spatial configuration derived from lattice constants, while optical entropy represents temporal dispersion extracted from emission spectra. As a proof of concept, the framework is applied to reactor pressure vessel (RPV) steels under neutron irradiation. The derived nonlinear entropy–stress relation reproduces the three experimental hardening regimes—linear, plateau, and exponential—observed over an 80-year operational lifespan. Agreement with ASTM E900 datasets confirms the predictive capacity of the model. By anchoring uncertainty in measurable quantities, this framework bridges quantum-like information limits and macroscopic material degradation, offering a general route for entropy-based prediction in engineering systems.
125910
Gi Dan Shim, Ji Won Heo, Jaewook Yoo, Hagyoul Bae and TaeWan Kim
Field-effect transistors (FETs) incorporating two-dimensional transition metal dichalcogenides (TMDs), such as MoTe2 and WS2, often suffer from significant hysteresis and fluctuations in the threshold voltage. These instabilities originate not only from charge trapping at the oxide–semiconductor interface but also from trap states located within the bulk of the semiconductor, primarily caused by intrinsic defects such as chalcogen vacancies. In this study, we performed a comparative analysis of the hysteresis behavior and trap-mediated charge-transport mechanisms in MoTe2 and WS2 FETs. The transfer characteristics were measured under various gate-voltage sweep conditions, temperatures, and wavelength-dependent optical excitations to extract the effective trap density and evaluate its impact on device performance. MoTe2 devices exhibited stronger hysteresis and a more pronounced temperature dependence than WS2 devices, indicating a higher density of thermally active and bulk-localized trap states. In MoTe2, although the field-effect mobility increased with gate bias, the rate of enhancement significantly decreased as trapped charge accumulated. In contrast, WS2 exhibited a more stable and gradual mobility enhancement with less sensitivity to the accumulation of trapped charges. Photoexcitation experiments revealed that the bulk trap states in MoTe2 are energetically concentrated, whereas those in WS2 are more evenly distributed. These findings indicate that WS2 is a more robust and reliable channel material for trap-sensitive FET applications, whereas MoTe2 requires refined interface and bulk defect engineering to ensure consistent operation.
125911
N Vinay Kumar Reddy and Umakanta Nanda
Perovskite solar cells (PSCs) have witnessed remarkable advancements in recent years due to their high-power conversion efficiencies (PCEs) and low-cost fabrication potential. Among the various perovskite materials, Cesium Lead Di-Iodide Bromide (CsPbI2Br) stands out as a promising candidate owing to its fully inorganic composition, which imparts excellent thermal stability, a major limitation in conventional organic–inorganic hybrid perovskites. CsPbI2Br possesses an optimal direct bandgap of approximately 1.93 eV, enabling strong absorption in the visible range and facilitating a high open-circuit voltage (VOC), both of which are crucial for efficient photovoltaic operation. In this study, we propose and simulate an optimized device architecture comprising ITO/ZnO/CsPbI2Br/CZT using SCAPS-1D. The design is carefully tuned by varying key physical and electronic parameters to maximize efficiency. The optimized device achieves a PCE of 19.76%, with a short-circuit current density JSC of 18 mA cm−2, a VOC of 1.8 V, and a fill factor (FF) of 86.9%. These results demonstrate the potential of CsPbI2Br as a thermally stable and efficient absorber layer for next-generation PSCs.
125912
Pratiksha Pratap, Laxmipriya Nanda, Satyendra Singh, Kartik Senapati, R P Aloysius and Venugopal Achanta
In this report, we present the superconducting properties of NbTiN films grown by reactive DC magnetron sputtering on MgO substrates. The films were deposited at room temperature, 300 °C, and 600 oC to study the effect of deposition temperature on crystalline structure and superconducting behavior. Superconducting parameters such as transition temperature (Tc), coherence length (ξ(0)), and upper critical field (BC2(0)) were obtained from resistance–temperature measurements. A clear dependence of structural and superconducting properties on deposition temperature was observed. Resistance–temperature data were analyzed using Aslamazov–Larkin (AL) and Lowest Landau Level (LLL) scaling theories to describe the superconducting fluctuation mechanism. Magnetoconductance curves extracted from magnetoresistance (MR) measurements were analyzed within the AL + MT fluctuation framework to estimate the dephasing time (τϕ) in the picosecond range. All these findings are crucial for understanding the response and recovery time of superconducting single-photon detectors. The successful growth and robust parameters of high-temperature-deposited NbTiN films indicate their potential for superconducting photon detectors, kinetic inductance detectors, and other quantum applications.
125913
Tao Liu, Yuxin Chen, Jiahao Li and Chan Yang
In this study, we design a valley-Hall phononic crystal by introducing sector-shaped openings into a plate, and verify its topological phase through valley Chern number analysis. The projected band structures of two types of interfaces reveal distinct gaps between the edge and bulk states. Further analysis confirms the existence and excitability of zero-dimensional corner states. Although these gaps narrow the continuous operating bandwidth of the topological channels, they provide an opportunity to introduce gradient parameter variations. To exploit this feature, we combine large-area topological waveguide techniques with topological rainbow trapping, thereby enabling frequency-dependent elastic wave demultiplexing. Moreover, the coupling between higher-order corner states and large-area waveguides presents a promising mechanism for frequency recognition. From an engineering standpoint, the proposed design provides a compact, robust, and reconfigurable platform for selective wave control and signal routing, with potential applications in on-chip acoustic processing and intelligent structural health monitoring.
125914
N A Poklonski, S A Vyrko and A G Zabrodskii
The influence of the clustering degree of electron spin magnetic moments from crystalline defects on the low-temperature magnetic susceptibility of materials is theoretically studied. The susceptibility of two diamond samples containing only identical spin radicals (uncompensated electron spins of radiation defects) with a concentration of 1019 cm−3 is calculated. The first sample contains only isolated spin radicals. The second sample contains the same spin radicals grouped into identical spherical clusters—ferrons (clusters). With an average sample concentration of 1019 cm−3, the local concentration of spin radicals inside each ferron is assumed to be at the limiting value of 1020 cm−3. As the number of spin radicals in each ferron increased from 10 to 350, the diameters of the ferrons increased from 6 to 19 nm, respectively. The low-temperature magnetic susceptibility of both samples is calculated based on the Brillouin function. It is shown that as the number of spin radicals in each ferron increases, the superparamagnetic behavior of the second sample is enhanced. At helium temperatures, in the limit of zero external magnetic field induction, the magnetic susceptibility of the second sample, in which the spin radicals are grouped into ferrons, is much greater than the susceptibility of the first sample, which contains only isolated spin radicals. This finding is supported by experimental measurements of low-temperature magnetic susceptibility in natural type IIa diamond samples irradiated with reactor neutrons.
125915
Jorge Villavicencio, Alberto Hernández-Maldonado and Irene Maldonado
We present a unified analytical study of the transmission phase time for Dirac particles scattered by delta-function potentials in one and two dimensions. For the one-dimensional case, we obtain a closed-form expression for the transmission relativistic phase time and show that it coincides with both the reflection phase time and the self-interference delay, in agreement with general predictions for symmetric, zero-width scatterers. The resulting delay alternates periodically between positive and negative values as the coupling strength increases, and converges to the known non-relativistic expression in the appropriate limit. This delay-advance pattern can be interpreted through the spectral structure of the Dirac Hamiltonian, where electron and positron bound-state sectors correlate with time advances and delays, respectively, reflecting the underlying nature of the delta interaction. In the two-dimensional case, we derive an exact expression for the transmission phase time in graphene and examine its angular and coupling dependence. The delay exhibits a periodic, butterfly-like interference pattern governed by resonant transmission and Klein tunnelling, vanishing at normal incidence and at integer values of the reduced coupling strength. These features reveal how angular interference and relativistic dynamics shape temporal signatures of quantum transport in Dirac materials. The closed-form analytical expressions for the relativistic phase time in one dimension and in two dimensions (graphene), which constitute the main results of this work. Our results provide analytic insight into phase-time phenomena in relativistic systems and provide compact benchmarks for time-resolved quantum transport in narrow-gap and Dirac-like media.
125916
Shalu Kaushik, Pawan Sharma, Vibha Vermani, Ashish Agarwal and Sujata Sanghi
The structural, dielectric, and magnetic properties of polycrystalline La2B′MnO6 (B′ = Co and Ni) double perovskite compounds were systematically investigated using x-ray diffraction (XRD), electrical measurements, and magnetic characterization. The samples were synthesized using solid-state reaction route. Rietveld refinement of the XRD patterns confirmed the formation of single-phase compounds crystallizing in a monoclinic structure with P21/n space group symmetry. Field emission scanning electron microscopy (FESEM) revealed uniformly distributed grains with minimal porosity, indicating high sample purity and dense microstructure. XPS reveals the mixed valence states for Co, Ni and Mn. Dielectric measurements demonstrated that the dielectric constant (ε′) and dielectric loss (tan δ) decrease with increasing frequency, which is typical of dielectric relaxation behavior. Conversely, both ε′ and tan δ increase with rising temperature, suggesting thermally activated dipolar polarization mechanisms. The observed dielectric behavior is strongly influenced by the microstructural characteristics of the samples. Magnetic measurements indicated that samples exhibit predominant antiferromagnetic behavior with weak ferromagnetic interactions. The relatively high dielectric constant values (∼105) highlight the potential applicability of these materials in energy storage and multifunctional device applications.
125917
I Nyoman Gede Putrayasa Astawa, Miftakhur Rohmah, Sigit Dwi Yudanto, Rahadian Roberto, Dedi Pria Utama, Gita Novian Hermana, Dedi Irawan and Efendi Mabruri
Face-centered cubic (FCC) high entropy alloys (HEAs) have attracted research interest due to their superior strength, flexibility, and irradiation resistance. However, FCC HEAs have low yield strength, limiting their practical applications. Adding W to HEAs is expected to improve their mechanical properties. Tungsten enhances many strengthening mechanisms, including solid solution, precipitation (μ, σ phases), and grain refinement. In addition to improving mechanical properties, the addition of W improves corrosion resistance by forming a dense WO3 film layer on the alloy surface. This study examined the effects of W addition in FeNiCoCrWx (x = 0, 0.3, 0.6, 1 at.%) FCC HEAs from three perspectives: microstructure, mechanical properties, and corrosion resistance. Increased W in as-cast FeNiCoCrWx alloys resulted in rounded dendritic grains with increased interdendritic areas due to W atom segregation during solidification. The ultimate tensile strength of FeNiCoCrW0.6 (1171 MPa) was lower than that of FeNiCoCrW1 (1714.62 MPa) without loss of elasticity (40.8%). The open circuit potential (OCP) values of FeNiCoCr and FeNiCoCrW0.3 are 66.36 and 66.32 mV, respectively. These values are lower than those of the other alloys, indicating better corrosion resistance.
125918
M Yu Tashmetov and Kh N Djangabaev
The GaAs(O):Cr sample was irradiated with 2 MeV electrons at fluences of 1 × 1017, 2 × 1017 and 3 × 1017 e cm−2 using an electron accelerator. In the Raman scattering spectrum of the as-grown sample, characteristic Raman peaks were observed at 267 and 290 cm−1. After electron irradiation, a redshift of these peaks was detected, indicating the accumulation of radiation-induced defects and internal stress. Fourier-transform infrared (FTIR) spectroscopy revealed the presence of local vibrational modes in GaAs(O):Cr at 578, 620, 717, 733, 758, 815, and 946 cm−1. The observed redshift of these peaks indicates the effect of radiation-induced defects on the local vibrational properties of GaAs(O):Cr. Hall effect measurements demonstrated that electron irradiation leads to a decrease in carrier concentration and an increase in mobility, depending on the electron fluence, within the temperature range of 100–300 K.
125919
Yi-Gong Wang, Zi-Jiang Liu, Yuan Guo and Xiao-Dong Wen
AgSbTe2 possesses an intrinsically low lattice thermal conductivity and a large Seebeck coefficient, rendering it a promising p-type thermoelectric material for the mid-temperature regime. Here, we combine first-principles calculations with Boltzmann transport theory to systematically investigate the lattice thermal conductivity, Seebeck coefficient, and electrical conductivity of intrinsic and Vanadium (V)- and/or Chromium (Cr)-doped AgSbTe2. Resonant levels are identified in the electronic structure via the k-projection band-folding method. Single or co-doping introduces distinct resonant states that modify the band curvature—and hence the effective mass—near the Fermi level, producing either band flattening or sharpening and, consequently, disparate electrical-transport behaviors. Among the configurations examined, Ag16Sb15Cr1Te32 exhibits an exceptional power factor (19.08 μW cm−1 K−2), an ultra-low lattice thermal conductivity (0.24 W m−1 K−1), and a correspondingly high figure of merit zT = 1.78 at the operating temperature. These findings underscore the synergistic optimization of electronic and thermal transport achievable through selective doping and provide microscopic insight into the resonant-level mechanism governing the thermoelectric performance of AgSbTe2.
125920
Mingbo Niu, Razikul Hasan Milon, Md Zannatul Arif and Andrew Das Shuvro
Renewable energy has emerged as one of the most considerable and sustainable alternatives to conventional fossil fuels, with solar photovoltaics (PV) playing a leading role in this transition. Among the different PV technologies, perovskite solar cells (PSCs) have gained remarkable attention due to their excellent optoelectronic properties, tunable bandgap, and low fabrication cost. However, stability and toxicity issues associated with lead-based perovskites have encouraged researchers to explore lead-free alternatives. In this work, we present a simulation-based investigation of a tin-based double perovskite solar cell with the structure FTO/CdS/CsSnBr3/MoO3/C using the SCAPS-1D environment. A comprehensive analysis was performed by systematically varying critical device parameters, including absorber thickness, donor and acceptor concentrations, ETL and HTL thicknesses, temperature, back contact work function, and both shunt and series resistances. The optimized device exhibited a remarkable power conversion efficiency (PCE) of 23.87%, with an open-circuit voltage (Voc) of 1.44 V, a short-circuit current density (Jsc) of 19.67 mA cm−2, and a fill factor (FF) of 83.97%. Furthermore, a comparison with various reported studies revealed that our proposed device demonstrates strong agreement with existing literature, validating the reliability of both the simulation and experimental results. Overall, the findings highlight the significant potential of CsSnBr3-based lead-free double PSCs for future commercialization.
125921
The following article is Open access
Mohd Anas, Wei Ding, Xiaojun Xian and Parashu Kharel
We have studied the structural, magnetic, and electrical transport properties of the YMB4 series of compounds (M= Cr, Fe, and Co). These materials exhibit high stability and possess notable refractory and thermoelectric properties. Furthermore, recent theoretical predictions suggest that some of these compounds may display quantum magnetism and dimer formation among the magnetic ions. We have synthesized almost single phase YMB4 compounds in the orthorhombic crystal structure (space group Pbam) using arc-melting and annealing. The Rietveld analysis of the room-temperature X-ray diffraction patterns reveals a clear change in the lattice parameter c, which correlates with the atomic radii of Cr, Fe, and Co. The temperature variation of resistivity measured between 2 K and 300 K reveals a metallic electron transport in all three YMB4 compounds. However, no abrupt change in resistivity due to structural or magnetic phase transitions is observed. Additionally, a weak positive magnetoresistance of 1%–2% has been measured at 2.5 K, the contribution from the metallic impurity cannot be ruled out. The carrier concentration, on the order of 1021 cm−3, has been determined using conventional Hall measurements. The thermomagnetic curves recorded between 2 K and 350 K reveal the non-magnetic behavior of all these compounds. However, a small magnetic moment from paramagnetic/ferromagnetic impurity phases is detected at low temperatures. Above room temperature, no magnetic transition associated with the breaking of a dimer is observed.
125922
Neetu Agrawal
We investigate the Floquet engineering of topological insulator surface states subjected to linearly polarized, off-resonant radiation in the presence of hexagonal warping and static band tilt. While circularly or elliptically polarized light can couple directly to Dirac surface states and induce a time-reversal symmetry breaking mass term even in the absence of warping, linearly polarized light interacts with the surface states only through a warping induced coupling that preserves time-reversal symmetry. By deriving the effective quasi-static Hamiltonian under off-resonant driving, we show that this interaction induces Floquet sidebands and leads to significant modifications in the energy spectrum, spin texture, and Berry curvature. These changes are strongly sensitive to the polarization angle, electric field amplitude, and tilt of the Dirac cone. We compute the anomalous Nernst conductivity and demonstrate its tunability via polarization and chemical potential. Our findings highlight the influence of hexagonal warping and radiation parameters in tuning the thermoelectric properties in irradiated topological insulators.
125923
Samim Hossain, P Murugavel, Subbiah Alwarappan and Somnath C Roy
Heterojunctions are one of the most important aspects in the design of photoelectrodes used for hydrogen generation through photoelectrochemical water splitting. Heterojunctions with suitable valence and conduction band positions help in the efficient separation of the photogenerated charges. Heterojunctions formation with precisely controlled interface and higher crystallinity is crucial for obtaining optimal performance. This work describes the design and fabrication of a heterojunction by the deposition of ZnO over single-crystalline TiO2 nanosheets using the pulsed laser deposition (PLD) method followed by Au functionalization using a laser-assisted liquid-based ablation method. The pulsed laser deposition technique allows the creation of heterostructures with atomic precision and minimum interface defects. The structural, morphological, and elemental analyses show the heterojunction with high crystallinity and uniform distribution of Au nanoparticles on the heterostructures. Optical studies from the diffuse reflectance spectrum reveal a red shift in the absorption edge (3.54 eV to 3.31 eV) and enhanced light absorption for the Au-ZnO/TiO2 photoanode. The photoelectrochemical measurements show that the Au-ZnO/TiO2 photoanode exhibited 24% higher photocurrent density than the ZnO/TiO2 photoanode and 102% higher than bare TiO2 nanosheets at a potential of 1.23 V versus reversible hydrogen electrode (RHE). The synergistic effect of suitable band alignment and plasmonic enhancement provides additional driving force for water oxidation due to efficient charge separation and hot electron injection. The ZnO/TiO2 resembles a type-II heterojunction with efficient charge separation and hot electron injection from Au nanoparticles due to a synergistic effect of excellent crystallinity of ZnO over single- crystalline TiO2 nanosheets and the Au-induced localized surface plasmon resonance (LSPR). This work represents a controlled, laser-assisted approach for fabricating plasmonic heterojunction photoanodes for efficient solar hydrogen production through water splitting.
125924
A R Asadian, M Hakimi and F Ostovari
This study examines how synthesis methods affect the microstructure and magnetic properties of Mn2FeZ (Z = Al, Ge, Ga) Heusler alloys. Samples were prepared using mechanical alloying, arc melting followed by milling, arc melting followed by annealing, and a combined arc melting–milling–annealing method. Mechanical alloying alone yielded superior saturation magnetization (~15–16 Am2 kg−1), a 16–17-fold increase over arc-melted and milled samples (~0.9–1.0 Am2 kg−1). This enhancement is attributed to metastable nanocrystalline structures formed during milling, which suppress non-magnetic phases. Annealing after arc melting produced stable phases but resulted in poor magnetism (~3 Am2 kg−1), indicating that crystalline order alone does not ensure high magnetization. For Mn2FeGa, the addition of milling before annealing in the arc melting–milling–annealing sample increased Ms eight-fold (~8 Am2 kg−1) by forming an orthorhombic structure. This work confirms the critical link between processing, microstructure, and magnetic properties. Mechanical alloying is the optimal method for achieving high magnetization, while intermediate milling effectively tunes phase formation. These insights aid in the design of advanced magnetic Heusler alloys.
125925
The following article is Open access
Sergei M Butorin
The recently introduced approach, combining the parameter-free Armiento-Kümmel generalized gradient approximation exchange functional with the nonseparable gradient approximation Minnesota correlation functional, was used to calculate the electronic structure of the Cs3Bi2Br9−xIx series within density functional theory including the spin–orbit coupling. The changes in the band gap size and its dependence on the x value was investigated. The band gap was found to be of indirect nature and it decreases with increasing I content as long as the system is in the
phase. A clear non-linear dependence of the band gap size on x was established which is in qualitative and quantitative agreement with reported experimental data. The quasi-rigid band behavior of the states in the valence and conduction bands of the
phase is discussed since no significant changes in the shape of the total density of unoccupied states were observed upon the isovalent substitution.
125926
Shruti Arya, Priya Rani and Sunita Srivastava
Perovskites have gained significant attention because of their thermoelectric and heat harvesting properties. The present work examines the thermoelectric properties of AgBX3 (B = Be, Mg, Ca; X = F, Cl, Br) perovskites by employing the density functional theory to gauge their feasibility for smart heat harvesting applications. The cohesive energy values reveal their thermodynamic stability. The indirect band gap of these perovskites lie between 2.28 eV and 8 eV covering broad spectrum of light from visible to UV. Hence, these are suitable for thermoelectric and optoelectronic applications. All perovskites demonstrate high power factor values but AgMgF3 and AgBeF3 perovskites have distinctively high-power factor of 1.29 × 1012 and 1.24 × 1012 WK−2 m−1 s−1, signifying their potential use in thermoelectric generator applications at temperatures as high as 900 K.
125927
Fatinah Najwa Roslan, Mohd Zaki Mohd Yusoff, Madhiyah Yahaya Bermakai, Babar Hussain and Siti Aisyah Zawawi
The triple heterojunction solar cell promises good efficiency as it widens the wavelength range by stacking various band gaps of the substrate’s cells. Additionally, many researchers acknowledge that a multijunction structure can improve the performance of a solar cell by using appropriate materials. The combination of zinc oxide (ZnO), aluminium gallium arsenide (AlGaAs), and silicon (Si) was chosen to form the triple heterojunction, ZnO/AlGaAs/Si. Reflectance can occur when light hits the top of the device, which causes low efficiency. A double-layer anti-reflective coating (DLARC) was chosen to overcome this problem by using various pairs of materials. The thickness and refractive index for each material were calculated to determine the optimum values for each wavelength between 250 nm and 1,200 nm. The performance of coated and uncoated solar cells was simulated using Personal Computer 1-Dimensional software under AM1.5G conditions at one-sun excitation. The uncoated cell device resulted in an efficiency of 21.8%, which was improved to 24.15% by using SiO2/ZnO as a DLARC on top of the cell.
125928
Cong Yan, Fangfang Wu, Jingming Zhong, Dongxin Wang, Xiaobo Ma, Fuli He, Hongsheng Zhao and Huanming Chen
The doping effect of Mg/Ca on phase stability, phase transition temperature and path of NiTi intermetallics have been investigated based on electronic structures and elastic properties analysis by first–principles method. The results show that Mg or Ca preferentially occupies the Ti sites uniformly in NiTi intermetallics due to the formation energy of substitutional Ni(Ti1–x+(Mg/Ca)x) are lower than the systems in which Mg or Ca occupying Ni sites or the systems with interstitial doping. The bonding strength of Ni–Ti has been weakened by Mg or Ca doping, indicating the phase transformation temperature decreases with the doping concentration increase. The C44 and (C11–C12)/2 of Ni(Ti1–x+(Mg/Ca)x) with B2 structure are increased after doping, indicating the transformation path for these systems is from austenite B2 to martensitic B19′ directly. This is attributable to the shear resistance along the {001} plane in B2 phase increases relatively after substitutional doping.
125929
Caden Sadler, Ty Porter, Timothy E Kidd, Paul M Shand, Andrew J Stollenwerk and Pavel V Lukashev
Here, we present the results of a computational study of Cu and Ni adsorption on WS2 and WSe2. In particular, we analyze the binding energies and mobility of Ni and Cu on these materials to predict their potential growth mechanisms. It is shown that, compared with Ni, Cu exhibits much weaker bonding and higher mobility on both WS2 and WSe2. Our calculations indicate that among the systems considered, Cu deposited on WSe2 and, to a lesser extent, on WS2, may potentially exhibit an electronic growth like that reported in other systems, such as Au on MoS2 and Cu on MoS2. At the same time, deposition of Ni on these layered materials is more likely to result in 3D nanoclusters, as we confirmed experimentally in our recent work on Ni / MoS2. The results presented in this work may serve as a guidance for experimental research on the deposition and growth mechanism of metals on layered van der Waals materials.
125930
Shoulun Chen, Jiajun Ma, Bei Wang, Jin Huang, Qian Chen, Tinghong Gao, Kaiwen Li, Xiaoyuan Luo, Qi Li and Qinlan Pan
Gallium arsenide (GaAs) is widely used in high-frequency and optoelectronic devices, but its brittleness challenges the simultaneous achievement of high material removal efficiency and surface quality. This study employs molecular dynamics (MD) simulations to examine the effects of vibration-assisted grinding (VAG) on GaAs nanomachining, focusing on three vibration periods: 20 ps, 70 ps, and 120 ps. The results indicate that VAG enhances the material removal rate (MRR) and reduces subsurface damage compared to conventional grinding. A vibration period of 70 ps offers the optimal balance, improving MRR by approximately 3% and reducing surface roughness by approximately 14%. While a shorter period (20 ps) further increases MRR, it also elevates surface roughness and residual stress. Conversely, a longer period (120 ps) improves surface integrity at the expense of material removal efficiency. Moreover, VAG reduces friction and promotes more uniform atomic flow, with the 70 ps condition showing the most significant improvements. These findings provide theoretical guidance for optimizing GaAs wafer processing in micro- and nanoscale device fabrication.
125931
Mingming Chen and Fayun Xing
In this work, we have demonstrated bias-tunable visible-near infrared spectral response photodetection achieved from p-GaAs/n-graded low-doped AlGaAs heterojunctions. The designed heterojunctions consist of a p–n junction composed of highly doped p-GaAs and n-type low-doped AlxGa1-xAs alloys with various Al contents, such as 0.5, 0.3, and 0 in sequence, a highly doped n-AlGaAs compensation layer, and a high Al content n-Al0.5Ga0.5As barrier layer. Separate absorption of incident photons with different energies has been observed at various interfaces constructed from AlxGa1-xAs with different Al contents. Besides, an effective tunability of the space charge region (SCR) was realized, benefiting from the compensation layer that localized the SCR at the p-GaAs/n-Al0.5Ga0.5As interface under equilibrium states, resulting in controlled collection of excess carriers by simply applying external bias. In addition, the Al0.5Ga0.5As barrier layer has improved the performance of photodetection by enhancing the electron collection efficiency. Collectively, bias-tunable response photodetection in ∼430–875 nm visible-near infrared spectral range has been achieved, with responsivity and detectivity as high as 0.24 A W−1 and 1013 Jones, respectively. The results shown herein provide promising pathways for achieving efficient and tunable spectral response photodetection in the future.
125932
R M Vakhitov and M A Filippov
This paper examines the magnetization reversal processes in a magnetically uniaxial disk characterized by the Dzyaloshinskii–Moriya interaction (DMI) and a columnar defect of the ‘potential well’ type. A magnetic skyrmion is stabilized at the disk’s center. It is shown that, depending on the relationship between the defect characteristics and the DMI parameter, as well as the magnetic field direction relative to the core polarity, the magnetization reversal process in the studied sample will proceed according to different scenarios. Specifically, when the field direction coincides with the core polarity, at high values of the defect characteristics, skyrmion transformation proceeds with the formation of intermediate structures (hybrid skyrmion, 0-skyrmion) and their subsequent magnetization reversal.
125933
Ning Meng, Wei Hong, Tingyu Liu, Fang Xie and Yu Ren
Based on first-principles calculations, the defect formation energy (DFE), lattice distortion, electronic structure, and optical properties of defect clusters
have been studied in the KDP crystal. The DFE results indicate that the defect clusters mainly exist in neutral and -1 charged states. Lattice distortion analysis reveals that the defect clusters produce significant variations in Cu-O bond lengths (up to 37%) for different charge states. Density of states (DOS) calculations reveal that the neutral charged state of the defect cluster generates high-density defect states within the band gap, which are highly likely to participate in multiphoton transition processes. In contrast, the −1 charged state induces an upward shift of the valence band maximum (VBM), resulting in a narrowed effective band gap that facilitates single-photon electronic transitions. By considering electron–phonon coupling, the calculated absorption peaks are located at 271 nm and 378 nm. The 378 nm absorption band closely matches the experimentally observed peak at 390 nm. The transition process is accompanied by significant lattice relaxation energy (nearly half of the absorption energy), which we propose causes severe damage to the crystal and significantly reduces the laser-induced damage threshold (LIDT) of KDP crystals.
125934
A Moroz, A Maksimova, S Pokrovskii and V Kashurnikov
The effect of disordering of periodic (square and triangular) pinning lattices on the transport and magnetic characteristics of a high-temperature superconductor is studied by means of the Monte Carlo method. The dependences of residual magnetization, irreversibility field, and critical current density on the degree of disorder are established. The optimal disorder rate is found to be 0.4 of the undistorted lattice constant and is shown to improve the critical current and trapped field by 10%–15% in certain ranges of external magnetic field. In other cases, it leads to a decay in the mentioned parameters but no more than 15%–20%. The matching effect occurs in the considered lattices and persists at disorder rates up to 0.6 of the undistorted lattice constant, while the vortex system adapts to the distorted defect structure. The obtained results demonstrate the efficiency of moderate disordering of pinning structures for HTSs intended for operation in high magnetic fields.
125935
Vladimir R Shayapov, Alena L Bogoslovtseva, Sergey Yu Chepkasov, Aleksandr V Kapishnikov, Ilya A Milekhin, Maria I Mironova and Pavel V Geydt
The purpose of the present work is the investigation of mechanical stress variation in the AlN films deposited by pulsed DC magnetron sputtering under changing of substrate temperature and magnetron power. It has been revealed for the first time that the deposition of AlN films with low mechanical stresses is possible under low values of substrate temperature and magnetron power. A remarkable decrease in mechanical stresses in films from −2.5 GPa to values less than ±300 MPa was found in the case of increasing the film deposition temperature from 60 °C to 300 °C. Comparison of the data obtained by the optical method of measuring the substrate curvature and the XRD method showed that the stress values according to the x-ray diffraction results for films grown at low temperatures (60 °C–100 °C) are significantly higher than those measured by the optical method. This difference can be explained by an increased content of defects for low-temperature films that are shown by results of FTIR spectroscopy, where the absorbance intensity of the E1(TO) mode peak increases with temperature. At the same time, with an increase in the deposition temperature to 275 °C–300 °C, the differences between the XRD and optical data vanish, and the mechanical stresses become small enough and satisfactory for the fabrication of multilayer film bulk acoustic wave resonators.
125936
E Danladi, LF Koao, TE Motaung, A Usman and SV Motloung
The Cs2AgBiBr6 double halide perovskite has catered for the problem related to lead toxicity and stability in perovskite solar cells (PSCs). Unfortunately, fundamental structural, optical, and electronic properties of Cs2AgBiBr6 are still not yet fully understood, couple with the unstable hole transport layer (HTL) such as spiro-OMeTAD, limited diffusion length of charge carriers, interface defects, and inferior hole extraction capability results to poor performance. Here, we delve into thorough assessment of Cs2AgBiBr6 as a feasible absorber material by deploying density functional theory (DFT) as a calculation tool. A band gap of 1.639 eV was obtained with contribution on Ag-4d and Br-4p orbitals. From the optical results, there was an observation of low optical losses, maximal absorptivity, larger reflectivity at the ultraviolet-visible regions, superior conductivity and suitable refractive index for application in opto-electronic devices. Guided by DFT investigation, we proposed a novel design of Cs2AgBiBr6 graphene-based PSC with graphene intercalated between the HTL and the absorber. Numerical optimization of HTLs such as spiro-OMeTAD, CuO, Cu2O, CuSbS2, CBTS and Mg-CuCrO2 using solar capacitance simulation tool (SCAPS-1D), shows Mg-CuCrO2 as the optimal HTL. The graphene modified device demonstrates an improved performance. Moreover, there was a better band matching in the graphene modified PSC. In comparison to the graphene-free PSC that shows PCE of 6.70%, FF of 37.50%, Jsc of 21.56 mA cm−2 and Voc of 0.83 V, the optimized graphene-based PSC shows the following metric performance PCE = 30.83%, FF = 90.87% Jsc = 21.72 mA cm−2 and Voc of 1.58 V. The improved performance is attributed to the minimal recombination losses and improved suppression of non-radiative interfacial recombination. The outcomes of the present study have paved the way for the development of a less expensive and high performing PSC with graphene layer by managing and controlling defect states and non-radiative recombination.
125937
Thanit Tangcharoen
In this paper, the intermetallic powders, aluminium-iron-nickel (Al-Fe-Ni), aluminium-iron-zinc (Al-Fe-Zn), and aluminium-iron-copper (Al-Fe-Cu) are synthesized via the sol–gel auto combustion method, with diethanolamine (DEA) used as the fuel. Having obtained calcined samples, characterization was performed, whereby the phase formation, morphology, texture of the surface, chemical composition, particle size, local atomic structure, cation distribution, magnetism, and optical and fluorescence properties were assessed through x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (UV-DRS), synchrotron x-ray absorption near edge structure (XANES), extended x-ray absorption fine structure (EXAFS), vibrating sample magnetometry (VSM), and photoluminescence spectroscopy (PL). The Al-Fe powders with their varying Ni, Zn, and Cu contents were shown via XRD analysis to exhibit a major spinel phase in addition to the presence of tenorite, wurtzite, hematite, and rock salt in trace quantities. Meanwhile, the samples containing zinc and nickel were revealed by UV-DRS analysis to offer improved reflection levels in comparison to the sample with copper, when examining the visible and infrared spectra. For all powders, band gap energy (Eg) was found to range from 1.00 eV up to 1.94 eV, while the experimental XANES spectra demonstrated the presence within the crystal structure of Fe3+, Al3+, Ni2+, Cu2+, and Zn2+ ions. Additionally, M2+ altering from Zn2+ ions to be Cu2+ and Ni2+ ions caused a substantial translocation of divalent metal (M2+) ions from the tetrahedral (A) sites to octahedral (B) sites, as clearly demonstrated by the EXAFS spectra. Specifically, the degree of inversion in these intermetallic samples is completely dissimilar and identified as 0.85 for Al-Fe-Ni, 0.75 for Al-Fe-Cu, and 0.06 for Al-Fe-Zn, as indicated by the curve-fitting analysis of Ni, Cu, Zn, and Fe K-edge EXAFS spectra. The Al-Fe-Ni and Al-Fe-Cu samples show a greater degree of enhancement in saturation magnetization than is the case for the Al-Fe-Zn sample, while it is revealed by the PL spectra that visible light is emitted by the Al-Fe-Zn sample only in the violet and blue regions, whereas for Al-Fe-Ni and Al-Fe-Cu these emissions reach as far as the green and UV regions. It can be concluded that the type of transition metal in the sample along with the presence of any intrinsic defects will explain the outcomes described.
125938
Fangfang Cao, Baozhu Cheng, Li Tang, Longxu Wang, Kaifeng Liu and Hong Hou
Traditional Helmholtz resonators are limited by their narrow bandwidth. Although a single rough neck can enhance acoustic energy loss, its ability to expand bandwidth is limited. By contrast, multi-neck structures can broaden the bandwidth but require stringent parameter matching and have complex configurations. Here, to address the issue of the narrow effective sound absorption bandwidth of traditional Helmholtz resonators, a parallel Helmholtz array structure with embedded rough necks and small back cavities (HARNB) is proposed, which achieves broadband and high-efficiency sound absorption through a weakly coupled inter-unit resonance system. Finite-element simulations are used to analyze the design principles and sound absorption mechanisms of HARNB, explore the influence of neck radius, length, relative roughness, and relative wavenumber on the sound absorption coefficient, and elucidate the physical mechanisms underlying these parameter effects. The acoustic absorption performance of HARNB is evaluated under both strong and weak coupling conditions. The results indicate that when each unit operates as an ideal absorber, the absorption coefficient of HARNB decreases significantly to ~ 0.6 under strong coupling. In the weakly coupled system, the absorption coefficient of a single unit is ~ 0.6, and its absorption performance is poor when it operates independently. However, weak coupling among units significantly improves the overall absorption efficiency, achieving high-efficiency absorption (
> 0.8) with a 56-Hz bandwidth in the 261–317 Hz range. The structure’s high-efficiency sound absorption is confirmed by replacing rough necks with smooth ones and conducting experimental tests on HARNB. The experimental results show that HARNB exhibits a high-efficiency sound absorption bandwidth of 257–323 Hz. HARNB provides broadband, high-efficiency sound absorption without requiring precise parameter matching, offering a novel approach for developing broadband acoustic absorbers. This has important implications for applications such as architectural noise reduction and industrial sound insulation.
125939
G B Yu, H X Qin, C M Zhu, L G Wang, R Wang, H Cui, X F Su, X L Jiang and M Y Qin
Bi0.5+xNa0.5TiO3, Bi0.5Na0.5+xTiO3, Bi0.5Na0.5Ti1+xO3 (x = −0.02, −0.01, 0, +0.01, +0.02) materials with high crystallinity were prepared by solid-state reaction method, respectively, and the XRD diffraction patterns proved that the materials obtained were all pure perovskite with R3c symmetric structure. The structural characterization shows that the stoichiometric changes of A-site elements (Bi, Na) and B-site element (Ti) have different effects on the lattice distortion in Bi0.5Na0.5TiO3. The non-stoichiometric ratio of different elements has different effects on the dielectric properties, piezoelectric properties and pyroelectric properties of the samples. The above results indicate that the effective regulation of the polarization behaviour of Bi0.5Na0.5TiO3 materials can be achieved by the non-stoichiometric modulation of the elements at different positions in the materials, which provides a reference for the research and application of the modulation of the properties of the Bi0.5Na0.5TiO3-based lead-free piezoelectric materials.
125940
Yifan Zhang, Shi Hong, Xuelei Xie, Yingying Jia, Sizhe Diao, Jing Wang and Chi Xu
The evolution of radiation-induced dislocation loops in pure aluminum and the influence of grain boundaries were investigated under in situ 200 keV electron irradiation at room temperature. Quantitative statistics on defect production and evolution of both intragranular regions and areas adjacent to a grain boundary were obtained from transmission electron microscopy (TEM). The Burgers vectors of the loops were determined using a projection morphology method, enabling analysis of the evolution of loops with different Burgers vectors. In the early stages of irradiation, dislocation loop growth exhibited an approximately linear rate, followed by saturation upon reaching a critical size. During intragranular irradiation, 〈111〉-type loops were predominant initially; however, the proportion of 〈110〉-type loops increased with prolonged irradiation. Near the grain boundary, dislocation loops were larger and grew at a higher rate than those in the grain interior. Attractive interactions between loops and the grain boundary resulted in a significantly higher fraction of 〈111〉-type loops in the near-boundary region.
125941
Sandip Haldar
Computational mechanical characterization of monolayer and multilayer anisotropic Carbon Ene-yne (CEY) is performed using Density Functional Theory (DFT) calculations. Uniaxial strain tests and pure shear tests are pursued to obtain the stress strain behaviour of the CEY. Elastic constants are then determined by fitting the in-plane orthotropic constitutive relations to the response. The four independent in-plane elastic constants, C11, C12, C22, C66 of monolayer CEY are determined as 178.9 N m−1, 63.36 N m−1, 51.32 N m−1, and 139.9 N m−1, respectively. Using Electron Localization Function (ELF) and evolution of bond lengths, angle, and bond strength, the deformation mechanisms during the loading are elucidated. It is observed that under uniaxial stress, the initial phase is dominated by rotation followed by bond stretch at a larger deformation. CEY is anisotropic by symmetry and thereby in mechanical properties. The Young’s moduli in different directions are found to be in the range of 28.9–230.7 N m−1 and Poisson’s ratios of −0.54–1.23. Uniaxial stress tensile tests revealed two stages of deformations; the initial stage being dominated by bond rotation followed by bond stretch. Further, in-plane failure envelope has been developed from the ultimate tensile strength (UTS) under uniaxial load and series of biaxial loading conditions. The failure envelope obtained from the DFT results are compared with model continuum based failure envelopes for anisotropic materials. Non-interacting elliptical failure envelope provides a conservative envelope compared the DFT results. Thickness dependent elastic constants are determined for the multilayer CEY up to seven layers.
125942
Bhargav K Alavani and Ramesh V Pai
In this work, we explore the influence of shaking parameters on the single-particle excitation spectra of bosonic atoms confined in a one-dimensional shaken optical lattice. Using mean-field theory to solve the two-band Bose–Hubbard model, we obtain a phase diagram that qualitatively aligns with experimental observations. We employ the Random Phase Approximation (RPA) based on mean-field states to examine excitation spectra across different phases during the phase transitions. Notably, the gapless superfluid (SF) and π-SF phases exhibit roton-maxon excitations, whereas the gapped Mott insulator (MI) phase can manifest as a direct or indirect band-gap MI. These calculations provide detailed insights into how excitations evolve across different phases and how spectral weights areredistributed during the transitions.
125943
Kaihuai Wen, Xiuli Yue, Zheyu Zhao, Wenjiang Xu, Junyi NanGong, Haiyan Xie and Tiancheng Han
Single-layer rasorbers offer structural simplicity but limited bandwidth, whereas multi-layer rasorbers enable broader absorption at the cost of increased thickness and fabrication complexity. Here, a low-profile quasi-single-layer rasorber featuring broadband absorption and low insertion loss is proposed. The rasorber comprises a dielectric substrate with two absorption layers printed on its top and bottom surfaces, respectively, and a lossless layer located beneath. Detailed equivalent circuit model (ECM) and power flow distributions are presented to elucidate the mechanisms underlying broadband absorption and high-efficiency transmission, while revealing the design principles for achieving enhanced absorption bandwidth. Compared with the single-layer design with only Lossy layer I, the relative bandwidth of 10 dB absorption can be increased from 102% to 122%, with the normalized thickness being reduced from 0.114 λL to 0.102 λL at the lowest operating frequency, meanwhile maintaining a minimum insertion loss of 0.07 dB at 10 GHz. A good agreement between the numerical simulations and experimental measurements validates the proposed design.
125944
Yi Sheng Wong, Feng Zhao and Kuan Yew Cheong
Bio-organic based non-volatile resistive switching (RS) memory is one of the solutions to address issues of electronic waste. C70 fullerene incorporated in pectin thin film with Pt and ITO as the respective top and bottom electrodes reveals write-once read-many (WORM) memory effect independent of the concentration of C70, with 25 wt% of C70 loaded shows the highest ON/OFF ratio as recorded by the current–voltage measurement. The ratio is directly controlled by carboxyl functional group modified by C70 in the pectin thin film that was characterized by Fourier transform infrared spectroscopy and the ratio is inverse proportional to the surface tension and Zeta potential. The WORM mode is confirmed using different electrical measurement strategies. By changing the compliance current, a configurable mode of RS memory is produced. The mechanism that controls the WORM effect is governed by the concentration and location of the carboxyl function group modified by C70.
125945
G M Milibaeva, H T Yusupov, D G Berdiyorova, Y Rakhimova, M Yusupov, A Chaves and Kh Rakhimov
Graphene, a two-dimensional material with a honeycomb lattice, exhibits massless Dirac fermion behavior, giving rise to unique electronic properties such as ultrahigh mobility and Klein tunneling. The motion of these charge carriers can be effectively tuned by introducing electrostatic potential barriers, enabling control over their transmission and scattering behavior. In this study, using the Dirac continuum model combined with the split-operator technique, we investigate the propagation dynamics of wave packets in graphene in the presence of circular potential barriers arranged in square and triangular geometries. Our results reveal a non-monotonic dependence of the wave packet transmission on the number of barrier rows along the propagation direction: the transmission initially decreases as rows of barriers are removed, but then increases again when additional rows are eliminated. To explain the observed nonlinear behavior, the time evolution of the transmission probability is analyzed, providing insight into the interplay between wave packet dynamics and the spatial arrangement of potential barriers. These findings offer a pathway for designing graphene-based devices with tunable transport properties through engineered potential landscapes.
125946
The following article is Open access
Junyu Luo and Kun Luo
Helical three-dimensional second-order topological insulators (3D SOTIs) are characterized by Kramers pairs of counter-propagating hinge states and gapped surface states. Here, we theoretically investigate quantum coherent transport in a dumbbell-shaped nanowire constructed from helical SOTIs. Using scattering matrix analysis and numerical simulations, we find that the two-terminal conductance exhibits Fabry-Pérot (FP) oscillations and a zero quantized conductance plateau. FP oscillations arise from multiple quantum reflections at both ends of the constriction, which stem from momentum mismatch. And the zero quantized conductance plateau is caused by the finite size effect of constriction, which may be seen as the off state of an electrical switch. These results can be realized by tuning the gate voltage or bias voltage. The FP interferometer and electrical switch offer a viable strategy for the application of topological hinge states, which remain robust against disorder of appropriate strength and constriction at distinct positions.
125947
The following article is Open access
Akanksha Agarwal, Rajarshi Roy, František Hájek, Dhananjay K Sharma, Kateřina Aubrechtová Dragounová, Karla Kuldová, Jan Čermák, Sarthak Das, Štěpán Potocký and Alexander Kromka
Among the transition metal dichalcogenides, single layer MoS2 has drawn great attention due to its direct bandgap of approximately 1.9 eV at room temperature, exhibiting extremely high excitonic photoluminescence in the visible range, making it a promising material for opto-electronic applications. In this work, we synthesized MoS2 on a Si/SiO2 substrate using a single-step atmospheric pressure chemical vapor deposition process, successfully yielding bilayer to few layered MoS2 films. The layer dependence of the as-grown MoS2 layers was analyzed from the peak energy difference (Δ) between the in-plane (E2g) and out-of-plane (A1g) phonon modes in the Raman spectra to quantify the specific number of layers within the MoS2 flake (2–15 layers). Room-temperature photoluminescence characteristics of the excitonic emission exhibited a redshift in energy by 0.04 eV as the number of layers increased in MoS2. An increase in the number of layers exhibited a decreasing dispersion of trion binding energy from a standardized fitting procedure of the PL spectra under appropriate boundary conditions. Henceforth, we observe a thickness dependent inversely related interplay between trion binding energy and electron density (
due to defects in MoS2, which is crucial for future opto-electronic applications.
125948
Hassan Sani Abubakar, Ding Xiao and Samuel de Jésus Ndimubandi
The design of a dual-band frequency-selective surface (DBFSS) operating at microwave frequencies is presented in this paper. The suggested unit cell consists of three-layered metal structures on top of which are two square rings. The middle section has another inductively ring-shape conductor for better isolation. The backside of the substrate is a cross-shaped radiator that acts as an absorption material. A remarkable behavior of such DBFSS other than the generation of dual band is that a transmission stability of up to 60° under different oblique incidence angles is achieved, with a stable simulated and measured insertion loss (IL) of 0.08/0.02 dB, and 0.83/0.98 dB within the two passbands. The working principle of the DBFSS was deduced based on an Equivalent Circuit Model (ECM) analysis. The final design prototype was fabricated, tested, and measured in a chamber room to verify the feasibility of the developed prototype using the CST software. The simulated results showed a strong correlation with the measured ones, with little discrepancies attributed to fabrication, soldering, and measurements.
125949
Santilata Sahoo, Vishva Jain, Ramyaranjan Das and Dimple V Shah
Vanadium Pentoxide (V2O5) and mixed oxide of V2O5 - tungsten trioxide (WO3) nanoparticles with an increased atomic percentage of W (x = 10%, 20%, 30%, and 40%) relative to V have been synthesized by surfactant-free approach at 500 °C. The average crystallite sizes and lattice strain determined from XRD data were found to be nearly equal utilizing the Debye–Scherrer approach and W-H plot computations. In both pure V2O5 and mixed oxide of V2O5-WO3 nanoparticles, agglomerated nanoparticle morphology is found using field emission scanning electron microscopy. The prepared sample’s purity and the existence of its component constituents are verified by EDAX. According to the UV–vis-NIR reflection, the energy band gap decreased as the percentage of W in mixed oxide V2O5-WO3 nanoparticles increased. The distinct vibration mode was detected using Raman spectroscopy, and the intensity of the peak decreases with increasing percentage W in mixed oxide V2O5-WO3 nanoparticles. FT-IR spectra confirmed the presence of V-O and W-O functional groups and their synthesis of pure V2O5 and mixed oxide of V2O5-WO3 nanoparticles. An analysis of the time-dependent photo-response properties of all detectors shows that 40% mixed oxide of V2O5-WO3 nanoparticles produces the best results, with the maximum photocurrent at 11.47 nA, responsivity of 2.29 μA/W, and detectivity of 4.78 × 108 Jones under 1 V bias with white light illumination.
125950
Premjit M Moirangthem and Lenin S Shagolsem
By means of coarse-grained molecular dynamics simulation, we explore the behaviours of lamellae forming charged diblock-copolymer (DBC) melts (charged A-block and a neutral B-block) kept under confinement between two rigid walls. By applying an electric field across the confinement, we systematically investigate the response of the ionic DBC melts to varying electric field strengths and fractions of charged moieties. Our results reveal a clear field-induced orientation transition directly influenced by both electric field strength and charge fraction. In the absence of an electric field, the system favours a perpendicular lamellar morphology (L⊥). However, as the charge fraction and field strength changes, it undergoes orientation transition forming mixed lamellae (ML) or parallel lamellae (L∥). At low value of charge fraction L⊥morphology is maintained even up to high field strength. As the field strength increases, an intermediate charge fraction leads to a transition from L⊥to ML, and eventually to L∥. At higher charge fractions (e.g., 50% of the A-block), the L∥ morphology forms at zero field strength and remains stable, showing no significant structural changes even under strong electric fields. We further analyse the individual chain conformation, density profiles and radius of gyration of the polymer melts, and discuss the origin of the orientation transition.
125951
Hadi Zarei and Ehsan Rahimi
Short-channel graphene nanoribbon (GNR) devices have emerged as promising candidates for high-speed switching applications due to their quantum confinement and ballistic transport properties. In this study, we analyze the electronic transport behavior of short-channel armchair graphene nanoribbon (AGNR) devices using a tight-binding Hamiltonian coupled with the non-equilibrium Green’s function (NEGF) formalism. Charge transport is modeled along the armchair direction, while the ribbon width is defined by the number of transverse atomic chains. Within the established Landauer–Datta–Lundstrom (LDL) framework, we derive a compact analytical form of the carrier occupation function that explicitly accounts for transverse-mode dispersion in wider ribbons, while avoiding computationally costly k-space summations. The current–voltage (I–V) characteristics are computed for multiple ribbon widths under weak dephasing conditions and compared with reference experimental trends. The dispersion-corrected formulation reproduces the observed reduction in turn-on voltage, enhancement of low-bias conductance, and overall more linear I–V behavior. These results highlight the necessity of properly including transverse energy dispersion within AGNR transport models, and demonstrate that compact analytical extensions of the LDL approach can accurately describe charge transport in ultra-short, wide graphene-based devices.
125952
Abhishek Shrimali, Arvind Kumar and Shweta Meena
Among the two-dimensional (2D) materials, numerous allotropes of borophene have earned significant recognition for their prominent specific capacity, low diffusion barrier and high mechanical strength. However, monolayer of borophene experience stability concerns, which limits its real-time applications. Recent experimental studies have confirmed higher stability of bilayer of borophene compared to their monolayer counterpart. Herein, we comprehensively investigate the potential of bilayer v1/12 borophene as an anode material with high performance in calcium-ion batteries using Quantum Atomistic simulation software-based density functional theory. The optimized calcium absorption sites were identified and the borophene bilayer could maintain good metallic conductivity with increasing concentration of Ca as corroborated through partial density of states. Furthermore, small diffusion barrier
for the migration of Ca-ion over the bilayer borophene structure indicates fast charging and discharging of a battery. High theoretical storage capacity
at lower calcium content of 0.274 could be achieved for bilayer v1/12 borophene. We believe that these results will contribute towards the ongoing progress in energy storing technologies and the bilayer v1/12 borophene could be a good choice as an anode material for future Ca-ion batteries with high power density and faster ion diffusion.
125953
Abhinandan Kumar, Tamonash Jana, Sushanta Ghuku and Arkadeb Mukhopadhyay
Ni-B-Cu-Sn coatings were deposited and heat treated at the phase transformation temperature (320 °C) and 400 °C for 2, 3 and 4 h. The hardness increased compared to the as-deposited state reported in a previous work. Thermogravimetric analysis revealed no mass gain due to oxidation. The coatings were found to be crystalline. The highest crystallite size was found for the coatings heat treated at 400 °C for 4 h. Furthermore, the coatings were found to have hydrophobic nature with optical contact angle >120° which is a significant improvement compared to the literature. The highest hardness was found to be ∼1375 HV0.05 and lowest wear volume of ∼0.572 × 106 μm3. The average coefficient of friction was also found to be lower compared to as-deposited state and ∼0.2. Scratch tests revealed the first critical load of failure as >24 N for coating heat treated at 400 °C for 4 h which was like tin or bismuth stabilized bath reported in the literature. The corrosion resistance was also found to be at par with the conventional Ni-B-Pb coatings. A newer and lead free Ni-B coating is thus reported with properties at par with the conventional coatings.
125954
Bo Zhang, Yan Shi and Shupeng Wang
To achieve high-strength connections for aluminum alloy components produced via Laser Powder Bed Fusion (LPBF) additive manufacturing, this study concentrates on LPBF-formed AlSi10Mg specimens. A single-factor variable approach was employed to conduct continuous laser welding experiments across two distinct parameter ranges: one characterized by high power and high speed, and the other by low power and low speed. Based on the previously discussed welding process parameters and informed by the mechanisms underlying weld porosity formation, this study conducts experimental investigations into various laser welding techniques. These techniques include pulsed laser welding, laser welding conducted under vacuum conditions, repetitive laser welding, ultrasonic-assisted laser welding, ultrasonic-assisted repetitive laser welding, and laser powder filling welding. The study ultimately showed that the pulsed laser filling powder welding process can achieve a high-quality connection for 5 mm thick LPBF-formed AlSi10Mg test specimens. The porosity of the weld is 2.2%, which is significantly lower than that observed in other laser welding processes. Furthermore, the tensile strength of the welded joint reaches a maximum of 267 MPa, which is 75.4% of the base metal’s strength. It plays a significant role in promoting the advancement and application of advanced manufacturing technologies.
125955
Yaohui Du, Haoshan Gao, Ping Wang, Baiying Ge and Yafei Zhao
In this work, the adsorption behaviors of 10 gas molecules, namely CO, CO2, H2O, H2S, N2, N2O, NO, NO2, O2 and SO2, on B doped monolayer MoS2 were investigated by studying their adsorption configurations, charge density differences, density of state and recovery times. The results indicate that, except for CO2 (which exhibits weak adsorption), all other molecules undergo chemical adsorption on B doped MoS2. Among them, B doped MoS2 demonstrates the strongest binding affinity for NO and O2, with adsorption energies of −3.81 eV and −2.77 eV, respectively. After adsorption, CO2, H2O and H2S act as electron donors, while the other 7 molecules are electron acceptors. Interestingly, the recovery time for CO2 at room temperature is very short (1.6 × 10–8 s). Therefore, B doped MoS2 can serve as a detector for CO2 among these gas molecules and as a scavenger for removing the remaining 9. This work provides important guidance for designing MoS2-based gas detectors and scavengers.
125956
Noman Akhtar, Lizhen Hou, Xiaoming Yuan and Shiliang Wang
The interfacial adhesion of one-dimensional (1D) nanostructures, such as nanobelts, to highly oriented pyrolytic graphite (HOPG) and mica substrates is critical for nanoelectronics, yet remains challenging due to dominant surface interactions, distinct topography, and the complexity of nanoscale measurements. Using a nano-bridging method for adhesion measurements and atomic force microscopy (AFM) for surface topography analysis, we systematically investigated how substrate chemistry and topography affect the adhesion of zinc sulfide (ZnS) nanobelts. AFM revealed that HOPG has a wavy surface with atomic steps, while mica is atomically flat; however, the surface topography had no significant effect on adhesion. Electrostatic interactions, depending on surface charge density, significantly enhanced adhesion up to 6 times in the case of HOPG and 10 times in the case of mica, compared to the theoretical van der Waals predictions. This discrepancy stems from substrate-specific mechanisms: induced polarization and image charge formation in conducting HOPG, and direct ionic complementarity with the atomically smooth surface of ionic mica. These results establish a framework for selecting two-dimensional (2D) substrates to effectively control adhesion in next-generation nanoelectronics, from low-stiction nanoelectromechanical systems (NEMS) on HOPG to strongly integrated sensors comprising 1D nanostructures on mica.
125957
Talgat M Inerbaev, Nursultan E Sagatov and Tatyana B Bekker
We present a comprehensive first-principles study of the structural, electronic, and optical properties of [PO4]3–-substituted antizeolite borate materials based on the antizeolite borate crystal lattice. The substituted structures are found to be both mechanically and dynamically stable, as confirmed by compliance with Born stability criteria and ab initio molecular dynamics simulations up to 1200 K, with no bond rupture or atomic diffusion observed. The static DFT calculations show that [PO4]3– substitution slightly affects the optical absorption. However, finite-temperature effects revealed by molecular dynamics at 300 K dramatically alter the optical response: thermal lattice motion reduces symmetry, enhances oscillator strengths, and induces a red shift in absorption for [PO4]3– modified structures. In contrast, the oscillator strength in pristine antizeolite borate is strongly suppressed at finite temperature, explaining the accuracy of static calculations. Our results demonstrate that while [PO4]3– substitution has minimal impact on the static electronic structure, lattice vibrations at room temperature play a decisive role in shaping the optical properties, highlighting the importance of dynamic effects in the design and interpretation of spectroscopic behavior in complex borate materials.
125958
Shengjia Song, Xiuwei Yao and Minhua Sun
This work presents definitive molecular dynamics evidence that aluminum crystallization violates Ostwald’s step rule in deep supercooled state, establishing a direct liquid-to-FCC transformation pathway without metastable intermediates. Through molecular dynamics simulations, we demonstrate three critical findings that challenge prevailing nucleation paradigms: (1) The complete absence of predicted BCC intermediate phases or core–shell structures observed in analogous Lennard-Jones systems, (2) Non-classical nucleation kinetics featuring chain-like embryonic nuclei whose formation coincides precisely with FCC energy stabilization , and (3) The nucleation process features a dual-component architecture consisting of a stable FCC core surrounded by an interfacial layer of single-atom thickness , which facilitates crystal growth through three distinct attachment mechanisms. The results fundamentally redefine our understanding of simple metal crystallization, showing that structural and dynamic heterogeneity - rather than intermediate phases - govern the nucleation pathway. These insights resolve long-standing controversies about metallic crystal formation and provide quantitative benchmarks for refining nucleation theories.
125959
Limei Hao, Dong-an Liu, Xiaole Yan, Qingning Yang, Kaixiang Huang, Xingchen Tian, You Xie and Zhi Chen
This work proposes a tri-band, trifunctional acoustic metasurface based on a nested tri-layer hollow tube structure unit, to overcome the limitations of conventional structural materials in terms of size and performance. The required geometric parameters of the metasurface were designed by utilizing the derived theoretical formulas, and the customized metasurface can simultaneously achieve multifunctional anomalous reflection, achromatic, or focusing in all three frequency bands. The stability of the anomalous reflection effect of this metasurface was also verified at ambient temperatures, with the anomalous reflection found to be very stable within the range of 0–60 °C. The most significant advantage of this metasurface is that a set of structural units can be used to realize the function in three frequency bands at the same time, which can effectively reduce the number of units and alleviate the problem of bulky structure. This study provides a novel concept for miniaturized and multifunctional acoustic devices, which have significant theoretical value and potential for engineering applications.
125960
Md Akram Ahmad
In this work, the impact of single-vacancy defects (SVDs) and double-vacancy defects (DVDs) in graphene nanoribbon (GNR) field-effect transistors (FETs) is analyzed and compared with that of a no-vacancy (WND) GNRFET. Self-consistent atomistic simulations based on the non-equilibrium Green’s function (NEGF) formalism are used to evaluate key device metrics. The study first examines the influence of vacancy defects on analog performance. It then investigates RF linearity using higher-order transconductance parameters (gm2, gm3), the zero-crossover point (ZCP), VIP2, and IIP3. The results show that the DVD-GNRFET offers superior RF linearity compared to both SVD and WND devices. In contrast, the defect-free GNRFET provides the best analog performance. These observations highlight an important trade-off between analog gain and linearity in defective GNR channels and offer useful insights for designing energy-efficient, high-linearity RFICs based on graphene nano-electronic devices.
125961
Zhenhao Chu and Wentao Ji
The magnetocaloric properties and critical behavior of the Cd-doped Mn5Ge2.7Cd0.3 alloy are systematically investigated for near-room-temperature magnetic refrigeration applications. The polycrystalline sample was synthesized by arc melting followed by annealing, and its magnetic properties were characterized using vibrating sample magnetometry. Temperature-dependent magnetization measurements reveal a second-order magnetic phase transition with a Curie temperature of ∼318 K. Critical exponents derived from modified Arrott plots and Kouvel–Fisher analysis yield β = 0.474, γ = 0.941, and δ = 2.985, which deviate significantly from standard universality classes, suggesting the presence of long-range magnetic interactions influenced by Cd doping. The maximum magnetic entropy change (|ΔSM|) reaches 6.757 J·kg−1·K−1 under a 5 T field change, with a relative cooling power of 284.85 J·kg−1. A universal curve constructed from rescaled entropy change data confirms the second-order nature of the transition. The results demonstrate that Cd doping effectively tailors the critical behavior of Mn5Ge2-based alloys. The combination of a near-room-temperature TC, a competitive refrigerant capacity, and the hysteresis-free nature of its second-order transition positions this material as a promising candidate for efficient and reliable magnetic cooling applications.
125962
Pavel A Andreev
The contribution of the polarization associated with the noncollinear parts of spins in the permittivity tensor of multiferroic materials is considered. As the equilibrium state, we consider the systems of parallel spins, so we have zero equilibrium polarization. Dynamical polarization appears due to the spin evolution via the magnetoelectric coupling. The regime of frequencies, where the refractive index goes to 1 is found for the high (in comparison with the characteristic frequency of the anisotropic energy or the cyclotron frequency) left/right circularly polarized electromagnetic wave propagating parallel to the equilibrium spin direction. Moreover, the signs of the imaginary part of the permittivity, the refractive index, and the frequency show the instability of the parallel spin configuration at the propagation of the linearly polarized electromagnetic wave due to the effective magnetoelectric interaction.
125963
R A Ganeev, Y A Buriyev, V V Kim, A A Isroilov, Sh R Kamalov, B K Eshchanov, V V Lim, A Yu Shalagin, O V Vershinina, I A Shuklov et al
A series of sulfide nanocrystals was prepared using a new reagent. The properties of the nanocrystals and of thin films containing them were investigated using spectroscopic, morphological and nonlinear optical methods. The two-photon absorption, three-photon absorption, and saturable absorption of the thin (30–80 nm) films containing different number of layers of the nanocrystals of three sulfides (Ag9GaS6, AgInS2, and CuGaS2) were studied using the 1030 nm and 515 nm, 200 fs probe pulses. The prevailing role of either saturable absorption or three-photon absorption was demonstrated in the case of Ag9GaS6 and CuGaS2 films by varying the intensity of the 1030 nm probe pulses. In the case of 515 nm probe pulses, the two-photon absorption in AgInS2 film was observed at small intensities followed by saturable absorption at higher intensities of the probe pulses. The three-photon absorption coefficients of Ag9GaS6 and CuGaS2 films were measured to be 2.2 × 10–21 cm3 W−2 and 6 × 10–19 cm3 W−2, while two-photon absorption coefficient of AgInS2 film was determined to be 3.6 × 1011 cm1 W−1.
125964
Jia-Ying Zhang, Ya-Xun He, Ting Chen, Xing-Jian Liu, Qun Wang, Bao-Juan Kang, Yu-Jia Zeng and Jun-Yi Ge
In addition to the importance in fundamental research, FeSeTe superconducting film has emerged as an ideal candidate for high-field magnet applications due to their ultra-high upper critical magnetic field and critical current density, as well as rich physical phenomena. Pulse laser deposition (PLD) is one of the most common fabrication methods for FeSeTe films. However, due to the presence of volatile Se and Te elements, the film composition deviates from the target composition. Previous studies mostly focus on the correlation between deposition parameters and film properties, but ignore the core issue of the compositional and structural evolution of the FeSeTe target itself during laser ablation. Therefore, this study systematically analyzes the effects of laser fluence on the ablation morphology, compositional distribution, and crystal structure of FeSeTe targets, and explores the regulation mechanism of deposited particles’ behavior on FeSeTe film parameters. The results show that laser ablation leads to significant Fe enrichment of FeSeTe targets due to the preferential sputtering and volatilization of Se and Te, with higher Fe content and expanded lattice parameters in the regions ablated at higher laser fluence and spot overlap. In addition, laser fluence directly affects the sputtering yield, kinetic energy, and transport efficiency of deposited particles, thereby regulating the thickness, Fe content, and lattice parameter of the FeSeTe film. This study reveals the essence of laser-target interaction during PLD, which can facilitate optimizing the PLD process to achieve precise control over film composition and performance.
125965
Ali Bakhtatou, Imane Ziaya and Kamel Zanat
Two-dimensional germanium-based compounds are attracting growing interest as tunable materials for electronic and photonic technologies. In this work, first-principles calculations are used to examine the structural stability and functional properties of trigonal GeS2, GeO2, and the Janus GeSO monolayers. The three systems are shown to be mechanically, energetically, and dynamically stable through elastic constants, cohesive energy and phonon spectra analysis. Their electronic structures display a clear composition-dependent evolution: GeS2 and GeO2 possess indirect band gaps, whereas the Janus GeSO layer exhibits a direct gap, arising from its broken mirror symmetry. This asymmetry induces a significant intrinsic out-of-plane dipole moment of −0.208 Debye and a corresponding built-in electric field of −2.82 V nm−1. Optical calculations further demonstrate distinct absorption profiles: GeS2 absorbs in the visible to lower UV, GeO2 in the deep UV, and GeSO shows broadband absorption across the visible to mid-UV spectrum. These results highlight the GeS2–GeO2–GeSO series as a promising materials platform for full-spectrum visible and UV photonic applications, with Janus GeSO particularly suited for dipole-engineered optoelectronics due to its direct bandgap and strong built-in field.
125966
Benben Zhang, Linchang Miao, Tianshuang Geng and Jing Zhang
Benefiting from the ability to efficiently attenuate elastic waves or sound waves within specific frequency ranges, locally resonant phononic crystals (LRPC) have emerged as cutting-edge materials for achieving both low frequency vibration control and noise reduction. The bandgap, as a key characteristic of LRPC, is determined by the complex coupling of multiple parameters. To address the systemic shortcomings in existing bandgap parameter analysis and the difficulty in quantifying interaction effects, this study proposes a systematic multi-parameter sensitivity analysis framework integrating the Morris screening method with the response surface methodology. Taking a typical 2D three-component LRPC as the study object, the comprehensive effects of multiple parameters on the locally resonant bandgap is thoroughly investigated. Foremost, the bandgap characteristics and the underlying local resonance mechanism were evaluated using the improved plane wave expansion method (IPWEM) and the finite element method (FEM). Subsequently, the Morris screening method was employed to comprehensively screen multiple structural and material parameters, rapidly identifying key bandgap-sensitive parameters to achieve effective dimensionality reduction in the parameter space. These critical bandgap-sensitive parameters include three structural parameters and four material parameters. Next, response surface methodology was employed to perform detailed multiple regression modeling of the relationship between the output response (bandgap characteristics) and input variables (key sensitive parameters). Through variance analysis and response surface visualization, the main effects and interaction effects of each key sensitive parameter on bandgap characteristics were precisely quantified. Results indicate that the scatterer radius, coating radius, matrix lattice constant, and matrix density exhibit meaningful interactions in determining bandgap characteristics. The vibration transmission calculation further demonstrates that the finite LRPC structure can achieve considerable attenuation of elastic waves excited by external sources within the bandgap. The proposed two-stage screening-modeling approach not only reveals the intrinsic mechanism of bandgap regulation but also provides a reliable theoretical basis and efficient technical pathway for the structural design of LRPC.
125967
Lijun Yan, Peng Zhu and Yu Liu
This study focuses on addressing the issue of unqualified or unstable impact toughness of welds in Grade X80 welded pipes with outside diameter (OD) 1,422 mm at −45 °C, and conducts the research and development of Grade X80 seamless steel pipes with OD 1,422 mm. High-purity pipe billets were manufactured by adopting a chemical composition with low-carbon, low-manganese, and high alloying elements, combined with processes such as ladle furnace (LF) and vacuum degassing (VD) refining, electroslag remelting, forging, as well as normalizing and annealing heat treatment. Using hot rolling and hot expanding composite forming process and normalizing heat treatment, two normalized seamless pipes with OD 1,422 mm, and a length longer than 8 meters were successfully trial-manufactured. The results indicate that the outside diameter, out-of-roundness, and straightness of the seamless pipes were well controlled, but the wall thickness uniformity required further improvement. The mechanical properties of the normalized or quenched pipes failed to meet the requirements of Grade X80 steel pipes. However, after quenching and tempering heat treatment, the comprehensive properties of the pipes were significantly improved. Specifically, when tempered at 550 °C, where the absorbed energy exceeded 260 J at −60 °C, and the microstructure consisted of granular bainite with a grain size of grade 10.0. The resulting properties met the requirements for Grade X80 steel pipes. Additionally, the study clearly indicates that tempering heat treatment at 580 °C should be avoided. This research provides an important technical basis for the development and engineering application of high-grade, large-diameter seamless steel pipes.
125968
Rajesh Raman, Giridharan Nambi Venkatesan and Raman Sankar
The multifunctional behavior of BiFeO3 ceramics was markedly improved via the co-substitution of Sm3+ at the A-site and Co3+ at the B-site, yielding the optimized composition Bi0.9Sm0.1Fe0.9Co0.1O3. Structural analysis showed that there were both rhombohedral (R3c) and pseudocubic (I23) phases present with reduced crystallite (∼48 nm) and grain (∼0.46 μm) sizes. Pair-distribution-function analysis revealed broadened Bi–O and Fe–O pair correlations, evidencing local strain and compositional disorder. The dielectric permittivity reaches about 1302 at 1 kHz and exhibits a relaxor-type diffuse-phase behavior, which is characterized by a diffuseness exponent of 2.10 and stable frequency dispersion. The ferroelectric hysteresis loops displayed a remanent polarization of 0.0253 μC cm−2 and a recoverable energy density of 0.075 J cm−3. The AC conductivity reveals two Arrhenius-type regimes, consistent with carrier transport through shallow and deep-trap states. Magnetic measurements indicate a transition from antiferromagnetic to ferromagnetic ordering, with a saturation magnetization of 8.2 emu g−1 at 300 K and 9.5 emu g−1 at 10 K, accompanied by zero-field-cooled/field-cooled bifurcation and spin-glass-like freezing below 260 K. Dielectric anomalies near the Néel temperature suggest magnetoelectric coupling. These findings demonstrate that Sm–Co co-doping effectively tunes the local structure and enhances the dielectric, ferroelectric, and magnetic functionalities of Bi0.9Sm0.1Fe0.9Co0.1O3 as a promising lead-free material for memory, magnetoelectric, and energy-storage applications.
125969
Jungmin Kim, Hyun Sung Noh, Younghoon Kim, Min Kyu Sun, Jongsung Lee, Mohamed Mussa Mtangi and Haigun Lee
High-temperature superconductor (HTS) magnets are typically constructed by winding long lengths of HTS tape, which need to be joined because current manufacturing techniques are limited in terms of the tape length that can be produced. During magnet fabrication, the tapes are subjected to various stresses, including bending and tensile stresses. Among these, bending stress is the most common, and induced strain that exceeds the mechanical limits of the tapes can degrade the performance of the magnet. This issue has become more significant as the superconducting layer, inherently brittle due to its ceramic structure, is thickened to enhance the critical current (Ic). Therefore, it is important to quantify the extent to which the electromechanical properties of HTS tapes change under different bending conditions and strain levels. In this study, bending tests were performed using two bending methods: easy bending (bent along the thickness direction of the tape) and hard bending (bent along the width direction of the tape). Under easy bending, the maximum tolerable bending strains, defined by the 95% Ic retention for lap jointed HTS tapes with Cu stabilizer thicknesses of 7.5 μm and 15 μm, were 0.43% and 0.47%, respectively, both at the bending diameter of 60 mm. Within these strain limits, the electromechanical properties of both samples were comparable, regardless of the copper thickness. Under hard bending, jointed tapes with widths of 4 mm and 8 mm were tested, and the maximum tolerable amounts of bending strain were 0.4% (∼996 mm) and 0.2% (∼3992 mm), respectively. In this case, the tape width significantly influenced the strain tolerance and performance. Within the proposed strain tolerance, performance degradation does not occur when joints are located in bending regions, thereby enabling stable coil fabrication.
125970
Md Sourav Talukder, Sultan Mahmud, Md Masud Rana, MD Shahadat Khan Rabbi, Mohammad Rahimul Islam and M Rukonuzzaman
This research provides a comprehensive numerical analysis of Cs2PtBr6-based perovskite solar cells (PSCs) utilizing the SCAPS-1D simulator to assess the influence of different charge transport layers (CTLs) on device performance. We looked at four ETLs (CdZnS, WS2, ZnO, and SnS2) and four HTLs (MoO3, CuSCN, NiO, and Spiro-OMeTAD) to find the best way to set up the interface. Among all HTLs, MoO3 was the best hole transport material for the absorber, with a maximum efficiency of 23.10% initially because of its deep work function, clear optical range, and chemical stability. Among all optimized structures, FTO/CdZnS/Cs2PtBr6/MoO3/Au showed better charge extraction, balanced carrier mobility, and less recombination at the interface and generated the best performance, achieving a PCE of 32.57%, a VOC of 1.13 V, a JSC of 33.17 mA cm−2, and an FF of 86.45%. These results show that choosing the right ETL and HTL materials can greatly improve the performance and stability of lead-free Cs2PtBr6 perovskite solar cells. This is a promising step toward making photovoltaic devices that are both efficient and good for the environment.
125971
Roomul Mushtaq and Mohd Zubair Ansari
The breakdown of pollutants, specifically dyes, using natural light sources, presents a significant area of investigation in fundamental material science. This study demonstrates the successful degradation of dyes through the utilisation of nanomaterials made from earth-abundant and non-toxic elements, specifically copper, zinc, tin, and sulfur (CZTS). The research concentrated on identifying the optimal pH levels for sol–gel and solvothermal synthesis methods to ensure appropriate phase formation of CZTS nanomaterials. Utilising the primary characterisation, x-ray diffraction, the tetragonal crystal structure of the nanomaterial was confirmed. The Raman analysis complemented the XRD findings to establish the phase purity of the material. The x-ray photoelectron spectroscopy investigation revealed that Cu, Zn, and Sn exhibited oxidation states of +1, +2, and +4, respectively. Additionally, the compositional verification was achieved through XPS and EDS analysis. At a lower pH level, agglomerated morphology and improper growth were observed, whereas at a higher pH level, nearly seven, proper growth accompanied by reduced agglomeration was evident. The black colour of the nanomaterial reflects that absorption takes place within the visible range of the spectrum, as verified by a UV–vis spectrophotometer. The measured band gap was approximately 1.5 eV, rendering it suitable for the photocatalytic degradation of dyes in visible light conditions. Upon exposure to visible light with CZTS functioning as a catalyst, the rate constants (k) observed for the degradation of rhodamine-B and methylene blue, which are two target pollutants, were measured at 0.0172 min−1 and 0.0229 min−1, respectively. The assessment of the dyes’ recyclability significantly boosts their applicability in environmental restoration efforts.
Machine learning with application to physical science
126001
The following article is Open access
Adrià Mompó Alepuz, Dimitrios Papageorgiou and Silvia Tolu
Modeling and control of nonlinear systems with time delays presents two fundamental challenges: representing the extended history of past signals needed for delay compensation and capturing complex nonlinear dynamics that can vary over time. This paper presents a novel method that addresses both challenges by combining efficient signal history compression using Legendre Delay Networks (LDN) with adaptive nonlinear learning through Kernel Recursive Least Squares Tracker (KRLST). By compressing temporal information prior to nonlinear modeling, the approach achieves accurate predictions while maintaining computational feasibility for online adaptation. The method supports multiple configurations, including state-dependent and state-independent variants, and integrates naturally with Smith predictor control architectures. Comprehensive simulation experiments evaluate both open-loop modeling accuracy and closed-loop control performance under various operating conditions. The results demonstrate that state-dependent variants achieve superior accuracy under nominal conditions, while state-independent variants provide more consistent performance under uncertainties and disturbances. Several tests with increasing delay times, parameter variations, and disturbance measurement show robust performance of the method even with significant uncertainties in both delay estimates and system parameters. This combination of efficient temporal compression, online nonlinear learning, and flexible configuration options provides a practical approach to controlling nonlinear delayed systems across diverse operating scenarios.
126002
Jain M Francis, Rakesh Kumar, Chandhini G and Nagaiah Chamakuri
In this article, we introduced a novel shock-capturing physics-informed neural network (S-PINN) framework tailored for solving weakly hyperbolic systems. In a weakly hyperbolic system, classical solutions may no longer exist, and the formation of shocks, contact discontinuities, delta shocks, and rarefaction waves within a finite time poses challenges for developing accurate numerical schemes. The S-PINN integrates the Rankine-Hugoniot (RH) condition with neural network architecture and employs a mask function to enable it to effectively capture discontinuities with high resolution. For comparison, we have developed a multi-level Weighted Essentially Non-Oscillatory (WENO) scheme, denoted as WENO-M(5,3,2), which demonstrates improved performance compared to the classical WENO scheme. The construction of the WENO-M(5,3,2) scheme involves blending of one fourth-degree polynomial, one quadratic polynomial, and two linear polynomials to capture both smooth and discontinuous features effectively. This multi-level formulation ensures better balance between accuracy and non-oscillatory properties. Through comprehensive numerical experiments, we highlight the superiority of the proposed S-PINN over traditional computational methods like WENO in terms of accuracy, resolving discontinuities with high resolution, and robustness.
126003
Vishnu KN, Suresh Sundaram and Cota Navin Gupta
The growing interest in consumer-grade Brain-Computer Interfaces (BCIs) drives the demand for robust classification methods for sparse electroencephalogram (EEG) montages. However, extreme dimensionality differences limit generalization and severely impede transfer learning from high-density models. This study develops a phase-aware projection framework that maps low-dimensional EEG inputs into the latent space of pretrained high-density models, preserving both temporal dependencies and oscillatory phase dynamics. To this end, a novel complex-valued, polar-gated long short-term memory (LSTM) projection architecture is proposed, where memory updates are interpreted as norm-preserving rotations, embedding an architectural bias toward phase learning while maintaining compatibility with real-valued learning frameworks. On a cross-subject cognitive workload task, the proposed approach significantly outperforms standard LSTM and complex-LSTM baselines in both accuracy and inter-subject robustness. In a cross-dataset motor imagery setting, phase-aware LSTM delivers a performance gain of more than 13% over the low-dimensional baseline (p <0.001; paired t-test). Further representational and interpretability analyses reveal that phase-aware projections yield decorrelated hidden units selectively tuned to task-relevant spectral dynamics. The shallow, single-layer projection mechanism offers a principled and lightweight strategy for bridging sparse and dense EEG montages, demonstrating feasibility even under extreme sparsity. While this work provides a strong empirical foundation, validation on native low-density recordings and embedded hardware remains a key direction for future deployment in real-world BCI systems.
126004
Yang Gan, Xuefeng Ren, Ji Xu, Ping Lin and Yongming Chen
Ship remote sensing detection technology plays a crucial role in modern maritime navigation and ocean management. However, ship targets exhibit multi-scale characteristics, diverse categories, and dense distributions, while image quality is often affected by weather variations and complex sea surface backgrounds, making detection highly challenging. In this paper, we propose RS-YOLO, an accurate ship detection algorithm based on YOLO11. Firstly, an Adaptive Convolutional Fourier Frequency Fusion Module is designed with a spatial-frequency cascading structure to effectively integrate local and global information, thereby enhancing feature extraction under low-resolution and complex background conditions. In addition, a Synergistic Convolution-Attention Mechanism is developed to strengthen the interaction between local feature extraction and global relationship modeling, enabling the model to accurately recognize ships in multi-resolution and densely distributed scenarios. Finally, a Shape IoU loss function is incorporated to better adapt to the complex shapes and scale variations of ships, improving the robustness and accuracy of bounding box regression. Experimental results demonstrate that the proposed method consistently outperforms the YOLO11n baseline across four public datasets, achieving mAP0.5 improvements of 2.1%, 2.2%, 1.6%, and 1.8% on HRSC2016, NWPU VHR-10, LEVIR-Ship, and DIOR, respectively. Moreover, comparative evaluations with several state-of-the-art detection algorithms further confirm the superior performance and robustness of RS-YOLO in complex maritime environments.
126005
Lian Lian
This study discusses a time series prediction approach derived from stochastic configuration networks that integrates ensemble empirical mode decomposition with sample entropy and Gauss-Markov fusion. The ensemble empirical mode decomposition algorithm decomposes the original time series to generate intrinsic mode function components of different scales. The complexity of each component is determined by the sample entropy algorithm. The components of the sample entropy value less than the original time series are combined into one, and the rest remains unchanged to reduce the number of prediction models used. Stochastic configuration networks is selected as the forecasting model of each component after combined. The Gauss-Markov fusion algorithm is adopted to ensemble the predicted values of these stochastic configuration networks. The ensembled forecsting error variance is smaller than the variance of single stochastic configuration networks, which enhances forecasting performance. In the case study, we choose four time series including Lorenz, Mackey-Glass, short-term wind speed and air quality index. The comparison results with other advanced approaches show the feasibility of the proposed approach in enhance forecasting accuracy of time series.
126006
Shuaiwei Su, Peng Yao, Jingteng Xue, Qu Nan, Yong Liu and Jingchuan Zhu
Ductile iron is widely utilized in industries such as wind power and high-speed rail due to its superior mechanical properties, machinability, damping capacity and cost-effectiveness. Machine learning has the potential to reveal intricate relationships within data, enabling more precise predictions and designs of material properties. In this study, a dataset was developed that includes the composition of ductile iron, annealing process parameters, and corresponding performance metrics. Six machine learning algorithms were applied, utilizing the contents of C, Si, Mn, Mg, Re, and Ni, along with annealing temperature and time as inputs. The output parameters were tensile strength, elongation, and impact energy at −40 °C. The models were trained using 5-fold cross-validation, and the best-performing models for each property were identified, with correlation coefficients exceeding 0.87 and average relative errors of 2.17%, 10.53%, and 13.66%. The generalization ability of the models was validated by comparing predictions with external data, which showed relative errors within 10%. These data-driven models provide an efficient design tool for developing novel ductile irons with combined high strength, enhanced plasticity, and superior low-temperature toughness, significantly reducing experimental costs while accelerating industrial deployment in critical sectors including wind power and high-speed rail.
126007
The following article is Open access
Novella Rutigliano, Riccardo Rossi and Pasquale Gaudio
Signal denoising is crucial in experimental and industrial applications to ensure data quality and reliable instrument performance. Traditional techniques, such as moving average, moving median, and requency-based filters, as well as deep learning methods like autoencoders, often struggle with systematic or deterministic errors. To address these limitations, this study introduces the Gemini Autoencoder (g-AE), a novel methodology that leverages twin signals representing the same phenomenon but differing only by noise, background and other external phenomena. The g-AE trains the autoencoder to reconstruct one twin from the others, preserving relevant features while effectively removing uncorrelated perturbations. The methodology was validated using synthetic time series with added random and electromagnetic noise, demonstrating superior denoising performance compared to conventional methods and standard autoencoders. Additionally, a novel metric called the Gemini MSE (mean squared error) was introduced to optimize hyperparameter selection, addressing the challenge of deterministic error overfitting when ideal (or target) signals are unavailable. Although developed and tested on time series, the g-AE framework is adaptable to other data types, such as spectra and images. To illustrate its potential, the g-AE was tested in a lidar experimental apparatus for environmental monitoring, where noise removal significantly improved the quality of the information retrieved from measurements. Once trained, the method can be applied without the need for twins, enabling fast, accurate, and real-time compatible denoising.
126008
The following article is Open access
Axel Ekman, Jian-Hua Chen, Carolyn A Larabell, Mark A Le Gros and Venera Weinhardt
To investigate the feasibility of interior imaging reconstruction in soft X-ray tomography for higher-resolution cellular imaging, including whole-cell imaging, we develop an alignment and reconstruction algorithm that combines a small number of sparse whole-cell images with a high-resolution local interior scan. Based on numerical simulations, we demonstrate that combined reconstructions mitigate the depth-of-field limitation in high-resolution scans, enable radiation dose optimization, and yield quantitative X-ray absorption values with sparse sampling. We further validate our numerical approach using experimental data from two different cell types and show that the combined reconstruction reliably provides high spatial resolution within an interior region of interest of a whole cell. The resulting sparse reconstruction framework offers robust, faithful visualization of cellular organelles in soft X-ray tomography. This mesoscale imaging strategy allows one to ‘scout’ and zoom into selected subcellular volumes of interest, enabling increased spatial resolution without sacrificing larger-volume imaging and providing information on the relative positions of all organelles within a cell.
126009
Junyi Liu and Liya Zhu
Thumbnail-Preserving Encryption (TPE) is widely employed to balance image privacy and availability in cloud storage. In this scheme, dynamic decryption keys are typically derived from the imformation of image, and they may fail to be correctly retrieved when images are attacked or tampered with, during transmission, storage, or processing. In response to this potential occurrence, we propose a decryption scheme using an improved generative adversarial network (GAN) to recover TPE facial images without any prior key. First, a multi-scale discriminator is designed to assess generated images by extracting hierarchical features from each convolutional layer. Next, a novel feature extraction module is developed by cascading a Hybrid Dilated Residual Attention Block (HDRAB) and a Residual Attention Block (RAB), which is integrated into the generator to enhance reconstruction quality. Experimental results demonstrate that the proposed model is suitable for some typical facial TPE schemes. Moreover, it achieves comparable reconstruction performance while maintaining lower complexity compared to existing approaches.
126010
Weiqing Wang, Tianle Yin, Yue Liu and Jing Pang
Fluid flow exhibits strong nonlinearity, and traditional solutions based on computational fluid dynamics (CFD) are limited by high computational costs. To efficiently model complex fluid dynamics, this study proposes a Fourier neural operator network (FNONet) to approximate solutions for 2D incompressible non-uniform steady laminar flows around obstacles. FNONet transforms flow geometry into Fourier space via discrete Fourier transform (DFT), parameterizes integral kernels using a neural network, and reconstructs velocity and pressure fields through hybrid frequency-spatial computations. A pressure gradient-constrained data-driven loss function is introduced to incorporate spatial-domain errors and frequency-domain pressure gradient constraints, thereby enhancing prediction accuracy near fluid-solid interfaces. Experiments demonstrate that the total mean squared error (MSE) of FNONet is over 20 times lower than that of convolutional neural network (CNN) based framework and 1.5 times lower than that of CNN-Transformer based framework. Compared with traditional CFD solvers, FNONet achieves a prediction speedup of over 3 orders of magnitude on central processing units (CPUs) and 4 orders of magnitude on graphics processing units (GPUs). The robustness and generalization of the model to unseen geometries are validated through qualitative visual analysis and quantitative error metrics on test datasets, providing a promising data-driven approach for CFD.
Reply
Comment and Reply
127001
A K Panda, S Panda and B K Panda
We sincerely thank the Editorial Board for forwarding the comments regarding our published paper [Panda et al 2024 Bulk properties of nuclear matter in a modified relativistic dirac formalism Phys. Scr.99 105307], particularly those highlighting similarities with the earlier work [Barik et al 2013 Nuclear equation of state in a relativistic independent quark model with chiral symmetry and dependence on quark masses Phys. Rev. C - Nucl. Phys.88 015206] and pointing out possible inaccuracies in our results. This Reply aims to clarify and responds to comments on our published study [Panda et al 2024 Bulk properties of nuclear matter in a modified relativistic dirac formalism Phys. Scr.99 105307], which developed a Modified Relativistic Dirac Formalism (MRDF) for bulk nuclear matter using a QCD-motivated linear confinement potential,
,unlike the harmonic potential used in [Barik et al 2013 Nuclear equation of state in a relativistic independent quark model with chiral symmetry and dependence on quark masses Phys. Rev. C - Nucl. Phys.88 015206]. Our formulation incorporates distinct eigenvalue equations, normalization conditions, and correction terms. The MRDF framework extends beyond [Barik et al 2013 Nuclear equation of state in a relativistic independent quark model with chiral symmetry and dependence on quark masses Phys. Rev. C - Nucl. Phys.88 015206] by providing a self-consistent analysis of the symmetry energy, slope parameter, incompressibility, spin–orbit strength, and the neutron-star mass–radius relation. A minor plotting error in the binding-energy curve for
has been corrected; however, this adjustment does not affect any numerical results or physical conclusions. All results continue to satisfy the standard nuclear saturation conditions and remain consistent with QMC-type models. With the inclusion of the missing citation and the corrected figure, our conclusions remain valid, reaffirming that the MRDF is an independent and consistent model for describing nuclear matter. Below, we present point-by-point clarifications and a structured comparison to establish the integrity of our work.
Corrigendum
129501
The following article is Free article
A K Panda, S Panda and B K Panda