Abstract
Computational mechanical characterization of monolayer and multilayer anisotropic Carbon Ene-yne (CEY) is performed using Density Functional Theory (DFT) calculations. Uniaxial strain tests and pure shear tests are pursued to obtain the stress strain behaviour of the CEY. Elastic constants are then determined by fitting the in-plane orthotropic constitutive relations to the response. The four independent in-plane elastic constants, C11, C12, C22, C66 of monolayer CEY are determined as 178.9 N m−1, 63.36 N m−1, 51.32 N m−1, and 139.9 N m−1, respectively. Using Electron Localization Function (ELF) and evolution of bond lengths, angle, and bond strength, the deformation mechanisms during the loading are elucidated. It is observed that under uniaxial stress, the initial phase is dominated by rotation followed by bond stretch at a larger deformation. CEY is anisotropic by symmetry and thereby in mechanical properties. The Young’s moduli in different directions are found to be in the range of 28.9–230.7 N m−1 and Poisson’s ratios of −0.54–1.23. Uniaxial stress tensile tests revealed two stages of deformations; the initial stage being dominated by bond rotation followed by bond stretch. Further, in-plane failure envelope has been developed from the ultimate tensile strength (UTS) under uniaxial load and series of biaxial loading conditions. The failure envelope obtained from the DFT results are compared with model continuum based failure envelopes for anisotropic materials. Non-interacting elliptical failure envelope provides a conservative envelope compared the DFT results. Thickness dependent elastic constants are determined for the multilayer CEY up to seven layers.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.

