The evolution of radiation-induced dislocation loops in pure aluminum and the influence of grain boundaries were investigated under in situ 200 keV electron irradiation at room temperature. Quantitative statistics on defect production and evolution of both intragranular regions and areas adjacent to a grain boundary were obtained from transmission electron microscopy (TEM). The Burgers vectors of the loops were determined using a projection morphology method, enabling analysis of the evolution of loops with different Burgers vectors. In the early stages of irradiation, dislocation loop growth exhibited an approximately linear rate, followed by saturation upon reaching a critical size. During intragranular irradiation, 〈111〉-type loops were predominant initially; however, the proportion of 〈110〉-type loops increased with prolonged irradiation. Near the grain boundary, dislocation loops were larger and grew at a higher rate than those in the grain interior. Attractive interactions between loops and the grain boundary resulted in a significantly higher fraction of 〈111〉-type loops in the near-boundary region.