Papers
General and interdisciplinary, including biophysics, geophysics and astrophysics
015001
Anisha Kumari and Santimoy Kundu
This study presents analytical formulations for Rayleigh type surface waves propagating in a functionally graded isotropic piezoelectric semiconductor (PSC) thin film, which is attached to a functionally graded dielectric substrate. The exponential gradation of the material properties is incorporated and general solutions are derived analytically using the harmonic wave analysis with the variable separation technique. Vacuum boundary conditions are imposed on the top surface of the film, while conservation of charge is applied at the film substrate interface. The dispersion relation is obtained, and numerical simulations are carried out in Mathematica to illustrate the dispersion characteristics of different modes. Numerical simulations are conducted to investigate the influences of semiconducting properties, material gradient index, steady-state carrier density, external biasing electric fields, and film thickness on the propagation behavior. A comparative study is conducted to examine the effect of exponential gradation for each factor. Furthermore, 2D and 3D visualizations are provided to depict the mode shapes of field variables. The findings reveal that material gradation, semiconductor coupling, and external biasing fields strongly affect both the propagation characteristics and the displacement response of Rayleigh type waves in PSC thin films. Although the mechanical fields remain localized near the surface, the electrical fields extend deeper into the structure. These outcomes offer valuable theoretical insights for improving the design and optimization of functionally graded PSC driven surface acoustic devices.
015002
Xiangguo Yang, Yongchun Cao, Tongtong Li, Qiang Lin, Xianwu Zeng, Zhengqi Cai, Caihong Liu and Xiaodi Huang
The scarcity of annotated Single-Photon Emission Computed Tomography (SPECT) images limits the performance of data-driven medical imaging models. Although SPECT is routinely employed in the clinical detection of bone metastases, its low spatial resolution and high noise hinder the generation of diverse, anatomically accurate training samples. To address these challenges, we propose Frequency-Aware SPECT-Conditioned Diffusion, a conditional diffusion framework for high-fidelity SPECT image generation. By incorporating frequency-aware modules, our model enhances anatomical accuracy while promoting lesion diversity, enabling the synthesis of structurally precise and pathologically varied images. Frequency-Aware SPECT-Conditioned Diffusion develops two novel components into the reverse denoising process: a High-Frequency Transform Attention (HFTA) module that restores crucial anatomical detail by enhancing high-frequency information at the bottleneck, and a Frequency Domain Enhancement Module (FDEM) that enriches global-local feature representation through frequency decomposition along the skip connections. Extensive experiments on real clinical SPECT datasets demonstrate that Frequency-Aware SPECT-Conditioned Diffusion achieves superior quantitative results compared with existing generative models, achieving an MSE of 13.42, PSNR of 32.99 dB, and SSIM of 0.8264. Moreover, the synthesised images produced by our method improve downstream tasks, boosting classification F1-score from 0.6850 to 0.7533 and segmentation Dice from 0.4143 to 0.4469. These results demonstrate the dual effectiveness of Frequency-Aware SPECT-Conditioned Diffusion in both high-quality image synthesis and enhanced task-specific model generalization in SPECT-based applications.
015003
N Farhangkhah and S Hajkhalili
We present the most general class of charged black hole solutions in third-order Lovelock gravity in even-dimensional spacetimes, incorporating an electromagnetic field and nonconstant-curvature horizons, which significantly influence the geometry for n ≥ 8. Unlike uncharged solutions, the near-origin behavior of the metric exhibits a timelike singularity for the electrically charged black holes. Thermodynamic stability is analyzed in both grand canonical and canonical ensembles. In the grand canonical ensemble, stability, determined by the positivity of both temperature and the Hessian determinant, imposes a lower bound on the event horizon radius below which black holes become unstable; this bound can vanish for specific electric, magnetic, or metric parameters, allowing stable configurations across all horizon sizes. In the canonical ensemble, stability is governed by the heat capacity, revealing both first- and second-order phase transitions. First-order transitions occur when the heat capacity vanishes or diverges at unphysical states, while second-order transitions take place between physical states and exhibit van der Waals-like behavior. Consequently, small and large black holes remain thermodynamically stable, whereas intermediate-sized configurations are unstable.
015004
Md Zafar Alam, Imran Ahmed Khan, Syed Intekhab Amin and Aadil Anam
This study proposes a high-performance β-Ga2O3 trench-gate (TG) MOSFET employing a variable lateral doping (VLD) scheme to strengthen power-device capability. The analysis examines the impact of VLD engineering, high-κ HfO2 and Al2O3 dielectrics, and field-plate structures on the electrical, thermal, and radio-frequency (RF) characteristics. HfO2 demonstrates lower ON-resistance and higher transconductance than Al2O3, along with reduced temperature sensitivity. The β-Ga2O3 TG-MOSFET achieves picosecond-scale switching, with a turn-on delay of 31.6 ps and rise time of 33.2 ps, supported by low parasitic capacitances (Ciss = 126.1 fF mm−1, Crss = 89.5 fF mm−1). The turn-off transition (td(off) = 1.2 ns, tf = 7.7 ns) confirms suitability for high-frequency power and RF operation. Incorporating dual field plates raises the off-state breakdown voltage from 2058 V to 3045 V an increase of 48% by lowering peak electric fields and redistributing the lateral field profile. The results confirm that the synergy between trench-gate design, lateral doping engineering, and dielectric optimization in β-Ga2O3 markedly enhances switching behavior, heat management, and breakdown strength, making the proposed architecture a compelling solution for advanced high-power, high-temperature, and RF applications.
015005
Muhammad Bilal, Ikram Ullah, Xiaoqiang Zhang and Umar Hayat
Pseudo-random number generators (PRNGs) are essential for protecting secret information from unauthorized access. Elliptic curves (ECs) are widely used in cryptography due to their random and unpredictable nature. To balance computational efficiency and security, we propose a novel PRNG, namely EC-SHA512, that integrates an ordered EC and its dynamically generated isomorphic ECs with the cryptographic hash function SHA-512. The existing PRNGs typically rely on cryptographic hash functions for key generation, while our algorithm employs the hash function SHA-512 to isomorphic ECs for generating robust binary streams with high key sensitivity. The novelty of our scheme is that it: (i) generates an EC comparatively over a small finite field to provide a dynamic and adaptable base set; (ii) constructs the desired isomorphic sets from dynamically constructed isomorphic ECs instead of relying on a fixed and pre-computed EC; (iii) maps the acquired concatenated sets by applying SHA-512 to generate secure pseudo-random numbers (PRNs); (iv) uses an affine transformation to reduce the structural patterns in the proposed sequences. The performance is evaluated using widely known tests, including the suites of the National Institute of Standards and Technology (NIST), TestU01, and Diehard, and verified through an application in an image cryptosystem. The empirical results confirm the superior performance of the presented algorithm EC-SHA512 when compared with existing PRNGs. Moreover, it takes 0.59 seconds to generate a sequence of 106 bits, reducing computational cost and making it well-suited for secure applications.
015006
Gayathri S and Dhanalakshmi K
Topological indices play a vital role in mathematical chemistry, as they quantify the structure of a molecule and provide numerical values useful for predicting chemical and physical properties. The M-polynomial provides a way to compute various degree-based topological indices efficiently, which simplifies complex molecular structure analysis. In this manuscript, we calculate the M-polynomial of the reverse degree-based topological indices
for the silicon carbide network Si2C3 − I[λ, μ] and analyze entropy metrics derived from vertex degrees and edge weights to evaluate the structural complexity of the network. Using logarithmic regression analysis, this study investigates the relationship between the calculated indices and the entropy values. Logarithmic regression is instrumental because interactions at the nanoscale often exhibit nonlinear patterns. The log transformation helps to linearize these relationships, stabilize variance, and enhance statistical interpretability. The strong correlations, high R2 values, and significant F-test results indicate that the proposed mathematical model effectively captures the structural behavior of the silicon carbide network.
015007
Yang Li and Hongwei Deng
Pancreas segmentation in CT images is fundamental for subsequent diagnosis and qualitative treatment of pancreatic cancer. Since the morphology of the pancreas may be influenced by issues such as class imbalance and boundary blurring across different individuals, segmenting the pancreas from abdominal CT images is a challenging task. To address these issues, this paper proposes a novel pancreas CT image segmentation network, REMC-UNet. First, we introduce the Residual Visual State Space block (ResVSS block) to capture extensive contextual information and effectively extract key features from pancreas CT images. Additionally, we design the Multi-Scale Hybrid Attention (MSHA) to aggregate long-range dependencies and leverage multi-scale spatial information to address the issue of unclear pancreatic boundaries. Finally, we propose the Feature Enhancement block (FE block), which allows the model to focus on global features while also attending to local regions during the feature recovery process. Through experiments on the public NIH dataset, we achieve an average Dice Similarity Coefficient (DSC) of 86.64 ± 4.32%, improving by 2.73% over the baseline model and outperforming other segmentation models.
Quantum optics, processing and information
015101
Wenyi Liang, Yuanfeng Jin, Tianxiang Hou and Yang Liu
The Demkov-Kunike (DK) model, characterized by a hyperbolic tangent detuning and a hyperbolic secant coupling, serves as a universal framework for describing driven quantum systems. However, existing research has primarily focused on two-level systems, some gaps still persist in extending the model to three-level configurations to achieve coherent population transfer (CPT). This study constructs exact solutions for both two- and three-level DK models via a canonical transformation, providing a basis for the quantitative analysis of population transfer, and achieves effective regulation of CPT via a finite-time adiabatic driving mechanism under specific parameter constraints. Furthermore, we analyze the impact of pulse truncation—a common experimental constraint—as well as environmental dissipation on quantum state evolution. The results show that the proposed scheme achieves rapid, high-fidelity coherent population transfer not only under ideal conditions, but also in the presence of realistic pulse truncation and even when decoherence induced by system-environment coupling is included. This work achieves CPT in the three-level DK model, offering a promising approach for advancing quantum state control in practical applications.
015102
J Ramya Parkavi, R Muthuganesan and V K Chandrasekar
This study explores the energy storage dynamics of a quantum battery (QB) modeled using a dipolar spin system with Dzyaloshinskii–Moriya (DM) interaction. We examine the performance of this system in terms of ergotropy, instantaneous power, capacity, and quantum coherence using a two-qubit model. By solving the system’s time evolution under cyclic unitary processes, we analyze how external parameters such as temperature, magnetic field, and DM interaction influence the charging behavior and quantum resources of the battery. The findings demonstrate that quantum coherence and DM interaction significantly enhance the energy storage efficiency and power output of the quantum battery, offering promising strategies for designing high-performance quantum energy storage devices. Furthermore, we investigate the performance of quantum battery under the influence of a common dephasing environment, which limits the long-term work-extraction capability of dipolar quantum batteries.
015103
M Karthick Selvan and S Balakrishnan
We show that the geometrical features of the unimodular squared eigenvalues of the nonlocal part of a two-qubit gate in the complex plane can be used to study the nonlocal characteristics of the two-qubit gate. It has been shown that the entangling power of a two-qubit gate can be expressed in terms of the mean squared length of the chords connecting the squared eigenvalues of the nonlocal part with each other. In this paper, we provide similar expressions for the gate typicality and the linear entropy of two-qubit gates. The expression of gate typicality involves the squared lengths of three chords connecting a squared eigenvalue of the nonlocal part with the complex conjugate of the other three squared eigenvalues. The expression of linear entropy is obtained from the expressions of entangling power and gate typicality. We also express them in terms of the linear entropies of certain two-qubit states. In addition, we show that the normalized entangling power of a two-qubit gate can be provided exact description in the Argand diagram. Finally, we analyze the simplices enclosing the origin in the convex hull of the squared eigenvalues of the nonlocal part of the perfect entangling two-qubit gates to construct a pair of orthonormal product states that can be transformed into maximally entangled states, and divide the region of perfect entanglers in the Weyl chamber into different regions based on the uniqueness of the simplices enclosing the origin.
Mathematical physics, complex systems and nonlinear dynamics
015201
Sena Baylı and Aslı Pekcan
In this work, we prove that shifted nonlocal reductions of integrable (2 + 1)-dimensional 5-component Maccari system are particular cases of shifted scale symmetry transformations. We present all shifted nonlocal reductions of this system and obtain new two-place and four-place integrable systems and equations. In addition to that we use the Hirota direct method and obtain one-soliton solution of the 5-component Maccari system. By using the reduction formulas with the solution of the Maccari system we also derive soliton solutions of the shifted nonlocal reduced Maccari systems and equations. We give some particular examples of solutions with their graphs.
015202
Lin Chai, Haiyan Fu, Ming Zeng, Wanning Yu, Tengfei Lei and Jiao Li
A second-order memristor itself is a complex nonlinear dynamical system. The core advantage of second-order memristors over the classic first-order model lies in their introduction of multiple coupled internal state variables, which enables far more complex dynamical behaviors and information processing capabilities than the latter. In this work, a three-dimensional chaotic system(3D-CS) with a discrete second-order memristor(DSM) integrated into a one-dimensional sine map(SINM) was constructed. Dynamical analysis reveals that the system exhibits a wide range of behaviors, including period, quasi-period and chaos states. Moreover, complexity analysis shows that smaller coupling parameters and larger nonlinear parameters tend to promote the emergence of chaotic dynamics. The system also displays multistability in the form of coexisting attractors, such as between chaos states and fixed points, as well as between chaos and period states. Finally, digital circuit implementations are performed to validate typical attractor phase trajectories observed in the system.
015203
Rachit Panda, Sumit Kumar and Rosalin Sahoo
This study deals with bending, free vibration and buckling analysis of functionally graded composite plates reinforced with graphene nano platelets (GPL). A higher order non-polynomial shear deformation theory known as the trigonometric shear deformation theory is used which satisfy traction-free boundary condition at the top and bottom of the plate, hence no shear correction factor is required. These problems are solved numerically using in finite element analysis (FEA) by developing inhouse MATLAB codes. The 8-noded serendipity element with C0 continuity is used for the mesh generation. The Hamilton’s principle is the primary variational principle used in this formulation to derive the plate governing equations. The structural behaviours of plate are analysed, focusing on the effects of stacking sequences, number of layers, weight percentage of GPL, size of GPL and ratio of length to thickness plate. The study explores both uniaxial and biaxial loading scenarios for buckling analysis and validates the results against existing literature for buckling and free vibration. The study reveals that, incorporating 1% of GPL to pure epoxy composite, the FG-X pattern exhibits a substantial reduction in static deflection by 81.7%, a marked increase in natural frequency by 133.8% and a significant enhancement in critical buckling load by 444.5%.
015204
Adhinarayan Naembin Ashok, Levita Kris and Adarsh Ganesan
This paper presents the observations of temporally evolving stochastic vibration patterns of a coin vibrating motor. Various voltages are applied to the coin vibrating motor, and the resulting vibrations are recorded using an accelerometer. Although an overall upward trend in mean vibration amplitude is observed with increasing drive voltage, instantaneous waveforms displayed pronounced nonlinear and quasiperiodic amplitude modulations, frequency shifts, and stochastic deviations that intensified at higher voltages. Furthermore, additional experiments involving periodic pressing of the motor and the propagating medium revealed the dependence of nonlinear electromechanical responses on the initial conditions. These results demonstrate that the dynamic behaviour of the coin-type motor is governed by a complex nonlinear dependence on current and displacement, with significant implications for precision control in miniature actuator applications.
015205
Ankana Borah, Tapasvini Roy, Dipam Das and Debasish Bhattacharjee
Cleaning mutualism between cleaner and client fish is fundamental to marine ecosystem health, significantly diminishing parasite burdens and enhancing host fitness. However, this interaction comes with epidemiological costs, as cleaner fish faces elevated infection risks due to close contact with clients, potentially destabilizing the mutualism. Despite its ecological significance, the cleaner–client mutualism remains to be analysed through mathematical model, in the context of disease dynamics. We develop a four-dimensional model that partitions cleaner and client fish into susceptible and infected classes, capturing both mutualistic benefits and infection costs. The system’s positivity and boundedness are studied, equilibrium points are identified, and their existence and stability are analysed. Bifurcation analysis identifies the parametric relation of both transcritical and Hopf bifurcations, highlighting the threshold dynamics that impact species persistence and system stability. Extensive numerical simulations were conducted to support the theoretical predictions and elucidate the system’s dynamical complexity via mentioned codimension-1 bifurcation analysis, which, when expanded to a two-parameter framework, unveiled the occurrence of generalized Hopf bifurcations. The phenomenon of bi-stability between vanishing and coexisting equilibria is also observed. The ecological influence of key parameters is thoroughly analysed through numerical simulations accompanied by illustrative figures.
015206
Aakash Kumar and Abhishek K Sharma
This study investigates the linear stability of mixed convection flow of an Oldroyd-B viscoelastic fluid in a vertical porous channel subjected to differential heating. To understand how thermal properties influence stability, two representative Prandtl numbers, Pr = 0.7 and Pr = 7 are considered. The governing equations for basic flow and generalised eigenvalue problem, based on the viscoelastic form of the volume averaged Navier–Stokes equations, are solved using a spectral collocation approach. The analysis shows that variations in Reynolds number strongly impact the critical Grashof number (
), the propagation speed of disturbances, and the overall instability mechanisms. The results further highlight that flow stability is governed by a delicate balance between fluid elasticity, buoyancy-driven forces, and the permeability of the porous medium. The fluids with lower Prandtl number display a stronger sensitivity to elasticity effects and further, the fluid elasticity has significant impact on the disturbance convection patterns inside the channel. The nature of instability is commonly found to be thermal-bouyant for the range of parameters considered in this study.
015207
Mansoureh Mahshidnia, Yaghoub Mahmoudi, Behzad Nemati Saray and Mohammad Jahangiri Rad
This study presents a numerical method based on the collocation technique for solving fractional delay differential equations (DDEs). The problem is first transformed into a Volterra integral equation for further analysis. To solve this, the method employs Legendre cardinal functions (LCFs) as basis functions within the collocation framework. By using both the matrix form of the fractional integral operator and the cardinality property of LCFs, the computational load is reduced. An error analysis is carried out. This confirms that, under standard regularity assumptions, the method is both stable and guaranteed to converge. Numerical experiments verify the accuracy of the approach and are consistent with the theoretical findings. Furthermore, comparative results demonstrate that the proposed method gives higher accuracy than several existing numerical techniques. In summary, the findings demonstrate that our framework is a reliable and adaptable solution that works well with the various fractional models found in physics, biology, and engineering.
015208
Nagendra Kumar Yadav and Ramsingh Yadav
Lumpy skin disease (LSD), caused by the lumpy skin disease virus, is a contagious viral infection affecting cattle, leading to significant economic losses in livestock production. In this study, we propose a fractional-order model of LSD that incorporates memory effects in both cattle and vector populations using Caputo-type derivatives. The model is numerically solved employing the recently developed Toufik–Atangana (TA) scheme, which captures nonlocal memory effects via a non-singular kernel. To benchmark the performance and accuracy of the TA scheme, solutions are compared with the classical Adams–Bashforth–Moulton (ABM) predictor–corrector method. The convergence and stability of the TA scheme are analyzed, and the impact of varying the fractional order σ on the epidemic dynamics is investigated. Numerical simulations demonstrate that the TA method not only provides higher accuracy in capturing the long-term dynamics of the disease but also effectively models the memory-dependent behavior of LSD outbreaks. The results highlight the importance of fractional-order modeling in designing control strategies and improving predictions for vector-borne epidemics.
015209
The following article is Open access
Barış Kavasoğullari and Mücahit Emin Karagöz
Thermal management is critical in ensuring that safety, functionality, and battery life in lithium-ion batteries are not compromised, especially when undergoing high-discharge currents. In traditional battery thermal management systems (BTMS), there are limitations in effectively suppressing a relatively high rate of temperature increases when in operation. To address this problem in traditional BTMS, this study investigates how changes in metal fin thickness affect heat transfer and temperature regulation in a BTMS that has a phase change material (PCM) to suppress overheating. The analysis considered two different types of PCMs with different thermal properties and thicknesses of 3 mm and 5 mm. The thicknesses of metal fins for both discharges of 5C and 8C were optimized. The generation of actual heat in batteries undergoing operation has been assumed to have a temperature dependency expressed as the lumped-capacity resistance. With a 5C discharge rate, the temperatures of batteries in the system with the first PCM were lower than those in the system with the second PCM. However, in a scenario involving a rate of 8C, temperatures were better controlled with a lower thickness of layers in the second PCM. On the other hand, for a thicker setup, temperatures were better controlled in a system with the first PCM. Moreover, temperatures for a safe operation were obtained only for a setup consisting of a 5 mm layer of PCM and 8 mm fins in a system with an 8C discharge rate. The current study explains how a battery can benefit thermally when a specific fin and PCM are used. Results obtained illustrate that batteries can benefit thermally when a suitable fin and PCM are selected. The study can provide important information required for designing advanced battery thermal management systems to improve safety and efficiency in batteries that power electric vehicles.
015210
Tahsin I Rasul
Chameleon chaotic systems possess the unique nature to exhibit a wide range of chaotic attractors through the adjustment of system parameters, enabling the generation of numerous chaotic signals suitable for various applications. This paper is devoted to studying the zero-Hopf bifurcation with characterize its dynamical behavior of the generalized Chameleon system. The local stability of equilibrium points is analyzed, as well as the existence of transcritical bifurcation at the origin. For the proposed system, a zero-Hopf equilibrium point at the origin is characterized at the origin. By using the averaging theory of first order, a limit cycle can be bifurcated from the zero-Hopf equilibrium located at the origin. Numerical simulations are employed to illustrate the system’s rich dynamical behavior, including the periodic orbits and chaotic attractors. Phase portraits, bifurcation diagrams, and Lyapunov exponents are utilized to characterize the transitions between different dynamical behaviors. The results reveal that subtle parameter variations can induce dramatic qualitative changes in the system’s long-term behavior, offering insights into the interplay between bifurcations and chaos in three-dimensional nonlinear systems.
015211
Bo-Ya Hou, Yu-Long Bai, Xia-Ting Jing and Chun-Lin Huang
Physics-informed neural networks (PINNs) effectively integrate physical equation constraints into the model to simultaneously learn data distributions and underlying physical laws. However, conventional uniform sampling is computationally expensive and inefficient for complex systems. The residual-based adaptive refinement distribution (RARD) algorithm, proposed by Wang et al, improves sampling but relies heavily on residual estimation, neglecting higher-order derivatives and leading to potential suboptimal sampling distributions. To address these issues, this study proposes the Residual-based Adaptive Antiderivative Approximation (RA-ADAF) approach. Within a fully connected neural network (FCNN) framework, RA-ADAF introduces antiderivative approximation layers (ADAF) with integral structure modeling capability, enhancing the representation of both the target function and its derivatives. Unlike the RARD strategy that solely relies on residual estimation for adaptive sampling, RA-ADAF combines residual-driven adaptive sampling with derivative-informed structural modeling. This dual mechanism improves model fitting in error-concentrated regions and enhances the representation of higher-order derivative behavior. The effectiveness of the RA-ADAF method is validated through a series of numerical experiments, including comparisons on the Burgers equation, Allen–Cahn equation, wave equation and 2D Poisson equation, as well as ablation studies. Experimental results demonstrate that RA-ADAF consistently achieves lower relative L2 error compared to the RARD method across multiple test cases. Moreover, it exhibits faster error convergence and more stable training behavior, providing a more reliable strategy for solving partial differential equations (PDEs) involving complex physical phenomena.
015212
Wanjing Tang
This study presents a rigorous quantitative characterization of the elastic field in a two-layer inhomogeneous structure. The configuration under consideration features an inner rod-shaped inclusion encapsulated within an outer inclusion of arbitrary normal size. Through the application of advanced analytical techniques, including layer potential methods and asymptotic analysis, we establish a precise quantitative relationship between the perturbed elastic field and the geometry of these inclusions. This quantitative result is subsequently applied to an inverse problem: the unique recovery of the inner rod’s geometry, based on a single elastic field measurement from the boundary.
015213
Jiakun Wang, Zhen Li, Weijie Tan and Xianming Wu
As the demand for secure image transmission continues to rise, encryption techniques based on chaotic systems have emerged as a vital component in the field of information security. To meet this demand and enhance transmission security, we propose a novel encryption scheme that significantly improves the security of images during transmission. In this work, a novel Sinusoidal-Quadratic Map Coupled Map Lattices (SQMCML) model is proposed, incorporating a non-adjacent coupling mechanism guided by cellular automata (CA). Besides, we presented the Sinusoidal-Quadratic Map (SQM) to enhance the system’s dynamics behavior. The relevant comprehensive dynamics analysis indicates that all lattices of SQMCML are in a chaotic state. Based on the SQMCML system, a new plaintext-related image encryption scheme is proposed, featuring a random-trajectory Josephus permutation method. Firstly, in order to improve the scheme’s capability to withstand differential attacks, a plaintext-related method for generating the chaotic initial values of SQMCML is proposed, which significantly enhances the plaintext sensitivity of the image cryptosystem. Subsequently, we presented the random-trajectory Josephus permutation method, in which chaotic sequences are utilized to dynamically determine the starting points and step sizes of each traversal round, enhancing both the randomness and security of the permutation process. Additionally, the diffusion operation is carried out by leveraging the iterative dynamics of 2D-CA model. The results of comprehensive simulations confirm the high security strength of the proposed approach, demonstrating its applicability to the secure transmission of image data. Comprehensive simulations validate the high security of the proposed scheme: chi-square test values significantly exceed the 0.01 threshold, NPCR and UACI meet theoretical expectations, and global Shannon entropy exceeds 7.999 while local Shannon entropy conforms to standard benchmarks—confirming its suitability for secure image transmission.
Particles, fields and nuclear physics
015301
Nongchao Tan, Ping Wu, Jun Sun, Ye Hua, Anxing Zhou, Xingju Du, Zhongliang Lv, Kaiguo Chen, Shen Zhang and Wenhui Huang
Electrons escaping from metal surfaces under external electric fields are invariably associated with radio-frequency breakdown of microwave devices and accelerators. This paper investigates the influence of temperature on the field emission characteristics of pure titanium and oxygen-free copper, which serve as the primary materials for microwave devices and accelerators. The experimental results demonstrate significantly enhanced field emission performance in both titanium and oxygen-free copper with a moderate temperature rise. At a constant electric field of 140 kV cm−1, oxygen-free copper exhibits a 4.0 fold increase in emission current at 105 °C relative to room temperature, while titanium achieves a 14.6 times higher current at 150 °C compared to its room-temperature baseline under a constant electric field of 190 kV cm−1. These experimental phenomena are not consistent with the traditional metal model. Afterwards, the thermal-field emission theory of dielectric microdot is introduced to reasonably explain the promotion of temperature on the field-emission characteristics of these two metals, indicating that the dielectric microdots on the surface dominate the thermal-field emission. The new discovery can provide theoretical guidance for suppressing vacuum breakdown in microwave devices and accelerators.
Atomic and molecular physics
015401
Zongxiao Zhu, Ziyou Zhou, Hongmiao Zhang, Qiang Lu, Yi Shi and Min Zheng
To elucidate void-mediated friction mechanisms of voids on the frictional properties of nickel-based single-crystal alloys with γ/γ′ two-phase structure containing reinforcing elements under rotational sliding contact, the mechanical properties and microstructural changes of nickel-based single crystal alloys containing voids in the process of circular friction were systematically investigated by using molecular dynamics to simulate the process of repeated friction of nickel-based single crystal alloy substrates. The results show that the friction force on the grinding ball in void zones is lower than that in non- void zones when the void has not undergone severe plastic deformation, and that the presence of the void can lead to a reduction in the resistance of the workpiece to wear. The voids direct the deformation within the matrix, but the γ/γ′ interface protects the γ′ phase in the matrix where the grinding balls are not directly acting. No shear strain was observed to penetrate the γ′ phase. In addition to this, the presence of voids and interfaces reduces the stress concentration within the matrix to some extent.
015402
Sahar Akbari, Ebrahim Gholami Hatam, Žiga Šmit, Somayeh Harooni and Primož Pelicon
This study presents a high-resolution elemental characterization of a 4th-century Roman bronze coin using micro-PIXE analysis equipped with a four-segment annular Silicon Drift Detector (SDD) array. The multi-detector configuration enhances angular coverage and count statistics, allowing for spatially resolved mapping of both alloy constituents and surface contaminants. Elemental quantification was performed using GUPIX, accounting for both bulk and surface contributions. Complementary x-ray fluorescence (XRF) analysis was conducted to probe deeper into the coin’s matrix and validate the core alloy composition. Micro-PIXE revealed Cu, Pb, and Sn as the dominant alloy elements, while surface-associated elements such as Al, Si, P, and Ca were attributed to environmental contamination and corrosion products. Scatter matrix plots were employed to assess correlations among elemental concentrations across different coin regions. Strong correlations among Cu–Sn and Sn–Pb confirmed typical bronze alloying patterns, while surface elements showed associations consistent with burial-related alterations. This work demonstrates a methodological advancement in combining angularly resolved multi-detector PIXE with XRF for robust stratigraphic analysis of corroded cultural heritage metals.
015403
Yurekha S P and Dhanoj Gupta
In the medical field, processes such as radiation therapy and medical imaging techniques, like positron emission tomography (PET) scanners, involve electron and positron scattering from biomolecules. In the present work, we focus on elastic scattering processes and specifically examine the isomeric effect by studying thiazole and isothiazole, which are isomers differing in their geometric arrangement. To investigate electron and positron interactions with these biomolecules, we employed the single-center expansion (SCE) method. For electron scattering, we calculated resonance positions corresponding to the σ* and π* states and compared our results with ab initio theoretical approaches such as the R-matrix and Schwinger multichannel (SMC) methods, and a good agreement is found in general. We further extended this study to positron scattering by computing differential cross sections (DCS), integrated cross sections (ICS), and momentum transfer cross sections (MTCS) for both isomers over an energy range of 1 eV to 50 eV. A comparative analysis of electron and positron scattering cross sections is also presented.
015404
S Kasthurirangan, A N Agnihotri, C Champion, P F Weck, L Gulyas and Lokesh C Tribedi
Multiple ionization and fragmentation of a large polycyclic aromatic hydrocarbon (PAH) molecule, i.e. coronene (C24H12) under the impact of fast (1.5–5.5 MeV/u) O ions are investigated as a function of the perturbation strength (charge state/velocity). The mass spectra from a Wiley-McLaren type time-of-flight mass spectrometer have been measured for different energy and charge state of the projectile. We have observed a dramatically large enhancement in the ratios (2+/1+) of doubly-to-singly charged parent recoil ion yields and similarly in the 3+/1+ recoil ion ratios which are discussed in the context of highly correlated electrons in the PAH and resulting collective excitations in coronene. These ratios are well-reproduced by a classical over-the-barrier (COB) model. The nearly linear dependence of the measured cross-sections on the projectile charge state is linked to the collective plasmon excitation in the coronene molecule based on a model originally developed for the fullerene. The measured absolute cross sections, obtained using a novel normalization technique, based on complementary electron spectroscopy experiments, are compared with the CTMC-COB (Classical trajectory Monte Carlo calculations including classical over-the-barrier model), as well as with a more sophisticated state-of-the-art quantum-mechanical CDW-EIS (continuum distorted wave eikonal initial state) model. The absolute partial cross sections for the singly, doubly and triply ionized recoil-ions exhibit a good quantitative agreement with the CDW-EIS calculations - a step toward the development of quantum mechanical model for such large molecule. The present observation will also have implications towards the study of astrochemistry of the interstellar medium.
Electromagnetism, optics and photonics
015501
Alexander Yurin, Gennady Vishnyakov and Vladimir Minaev
This paper describes goniometric methods for measuring the refractive index (RI) based on measuring the angles of light deviation with a triangular prism made from the material under study. Three-sided goniometric methods (TGM) involving measuring the angles of light deviation on all three faces of a prism and determining the RI by solving a system of equations are considered. The advantages and limitations of such an approach are analyzed. The calculation of the maximum allowable prism angles and measurement errors is given. It is shown that the use of TGM helps to increase the accuracy of RI measurements up to 2 times compared with the widespread minimum deviation method and avoids additional measurements of the prism angles. The limitation of TGM is the phenomenon of total internal reflection, which imposes a condition on the maximum allowable angle of the prism, depending on the value of the RI. This condition limits the measurement range to RI <2.0. A reference prism set was studied using a high-precision goniometer with a digital autocollimator and the measurement errors were estimated. The calculated absolute error does not exceed ±1·10–5, which proves the prospect of using TGM for high-precision RI measurements.
015502
Yabin Shao, Chen Chen, Xinping Zhai, Fang He and Wen Luo
InP/ZnS quantum dots (QDs) were synthesized via the thermal injection method and characterized for their morphology and optical properties. The absorption spectrum exhibited a red shift from 380 to 450 nm due to size differences. Photoluminescence (PL) emission varied at 520, 550, 580, and 610 nm, with an 85 nm red shift and varying full width at half maximum. Single-photon excitations are identified in pump-dependent PL spectra. Using a variable temperature fluorescence spectroscopy system, PL behaviors were analyzed, revealing changes in exciton binding energies and phonon energies as temperature increased. The PL peak position initially blue shifted then red shifted due to thermal expansion and electron–phonon interactions. Time-resolved PL at different wavelengths showed varying decay lifetimes, indicating size distribution irregularities in the InP/ZnS QDs.
015503
Yasmin Khairy
Cobalt chromite (CoCr2O4) nanoparticles with an average crystallite size of approximately 8.6 nm were synthesized via a simple combustion approach and subsequently embedded into a polyvinyl alcohol (PVA) matrix using a solution casting process to fabricate nanocomposite films. X-ray diffraction (XRD) confirmed the formation of a cubic spinel phase belonging to the Fd-3m space group. Transmission electron microscopy (TEM) images revealed that the nanoparticles exhibit an average particle size of about 22 nm. Fourier-transform infrared (FTIR) and Raman spectroscopic analyses evidenced strong interfacial interactions between the CoCr2O4 nanoparticles and the PVA polymer chains. Optical absorption studies showed a distinct redshift, accompanied by a reduction in both direct and indirect band gap energies from 5.67 eV and 4.80 eV for pristine PVA to 3.79 eV and 2.17 eV for the most doped samples, respectively. This reduction in band gap was correlated with an increase in Urbach energy from 0.843 eV to 3.6 eV, indicating enhanced structural disorder and the emergence of localized electronic states. Additionally, the third-order nonlinear optical susceptibility (χ3) exhibited a remarkable enhancement, rising from 2.57 × 10−16 esu to 0.0815 esu. The optical limiting response under 533 nm and 635 nm laser excitations was also significantly improved, primarily due to band gap narrowing and surface plasmon resonance phenomena. Collectively, these results highlight the strong potential of CoCr2O4/PVA nanocomposites for advanced optoelectronic and laser shielding applications.
015504
Sid Ahmed Khantar, Chahrazed Bendenia, Souhila Bendenia, Hanaa Merad-Dib, Samia Moulebhar and Sarra Merabet
This study presents a detailed numerical optimization of an N–i–p structured MAPbI3 perovskite solar cell (FTO/ZnO/MAPbI3/Spiro-OMeTAD/Se) using Silvaco TCAD for device simulations, achieving a record power conversion efficiency PCE of 22.24% enabled by a high fill factor FF of 86.01%, an open-circuit voltage VOC of 0.91 V, and a short-circuit current density JSC of 28.17 mA cm−2. Central to this achievement is the systematic minimization of series resistance (Rs) and maximization of shunt resistance (Rsh), whose values were extracted from J-V curves using OriginLab, critically governing charge extraction and recombination losses. Through Silvaco TCAD-based simulations, was optimized the thickness and doping profiles of the MAPbI3 absorber, ZnO ETL, and Spiro-OMeTAD HTL to maximize charge transport while suppressing recombination. Notably, Rs was reduced to an ultra-low 1.55 Ω.
, while Rsh reached 17511 Ω.
, underscoring their pivotal role in achieving peak performance. Critical interfacial energy alignments (CBO/VBO) were engineered to further mitigate resistive losses. Defect tolerance limits were identified to minimize voltage losses, with doping-dependent Rs/Rsh analysis revealing their dominant influence on JSC and FF, a key insight for overcoming efficiency bottlenecks in perovskite photovoltaics. These insights establish a universal optimization framework bridging electrical and optical design principles, with resistance management as a cornerstone strategy.
015505
Xianjun Sheng, Wei Xiao and Ning Liu
To address the significant degradation in shielding effectiveness of slotted cavity electromagnetic shielding during resonance band caused by cavity resonance frequencies, this paper proposes a method for enhancing the shielding performance of slotted cavity electromagnetic shielding by integrating frequency selective surface based on an electromagnetic topological structure model. First, calculate the electromagnetic shiel-ding effectiveness of the slotted cavity to determine the resonant frequency band of 0.7 to 0.72 GHz, modeling the slot as equivalent bandpass two-port network. Design a dual-layer frequency selective surface with miniaturization and band-rejection characteristic based on the resonant frequency band, and model it as an equivalent band-rejection two-port network. By cascading two models, a rapid analysis of the frequency selective surface enhanced slotted cavity shielding performance was achieved, thereby guiding the structural optimization design. Simulation results indicate that after applying the frequency selective surface, the electromagnetic shielding effectiveness within the 0.7 to 0.72 GHz resonance band increased from 10 dB to 62 dB. Physical testing confirmed that the electromagnetic shielding effectiveness across the entire 0 to 1 GHz frequency band exceeded 50 dB.
015506
Gulab Shah, Qunsheng Cao, Afzal Ahmed, Asaf Khan and Zaheer Ahmed Dayo
This manuscript proposes a frequency selective surface with wide range independent tuning of 2.5 GHz and 0.8 GHz for lower band with pole at 2 GHz and high frequency band with pole at 3.6 GHz, respectively. Two bands can be tuned independently at single and dual polarization of wave. Dual band combined tuning is also achieved in the dual band tunable frequency selective surface (DBTFSS) design at single and dual wave polarization which leads to multifunction property at multiple bands. Finally, the designed DBTFSS structure is processed, manufactured, and used to verify correctness of the DBTFSS design. Angular stability of the designed DBTFSS structure is maintained within the range of 45∘ incident wave angle, which can be enhanced by compensating for higher angles offsets through biasing to varactor diodes.
015507
The following article is Open access
H Ahmad, M K A Zaini, B Nizamani, M A M Lutfi, Jemal M Yassin and Manuel Sánchez-Sánchez
Metal–organic frameworks (MOFs) are now being extensively explored as promising mode-lockers, marking a significant advancement in generating ultrashort pulses for diverse applications. In this work, copper metal–organic framework (Cu-MOF-74) is reported as a wideband saturable absorber (SA) to obtain mode-locking in both thulium-doped fluoride fibre (TDFF) and thulium-doped silica fibre (TmDF) lasers. These lasers produce ultrashort pulses in the S-band and at 2 μm. The mode-locked TDFF laser operates at 1487 nm, while the TmDF laser operates at 1957.2 nm. Mode-locked TDFF laser produces ultrashort pulses of 400 fs duration, while TmDF laser generates 1.14 ps pulses. The repetition rates for the TDFF laser and TmDF laser were 0.396 MHz and 19.5 MHz, respectively. Both lasers have a remarkable signal-to-noise ratio (SNR) of above 60 dB. Mode-locking stability was maintained for over 2 h in TDFF and TmDF lasers.
015508
Yahya Baykal
In a non-Kolmogorov jet engine exhaust turbulence environment, scintillation index is found and evaluated. Effects of non-Kolmogorov turbulence spectrum, i.e., power law on the scintillations are studied. Variations of the scintillations against the change in the power law are found for various link lengths, structure constants, wave numbers, jet engine exhaust turbulence strengths, source sizes and scale parameters of jet engine exhaust turbulence. When the power law of non-Kolmogorov turbulence varies, the changes in the scintillations in jet engine exhaust turbulence are not large. The results in this paper could be of help to designers of optical wireless communication systems operating in atmosphere experiencing non-Kolmogorov jet engine exhaust turbulence.
015509
Alireza Shahsavari Goghari and Maryam Pourmahyabadi
This paper presents the design and analysis of an electro-optic modulator based on hybrid plasmonic waveguide structure using suspended monolayer graphene. The hybrid plasmonic waveguide configuration consists of a silica substrate, an air gap, monolayer graphene, a silver nanowire, and a silicon nitride cladding layer, where the monolayer graphene is implemented in suspended architecture. The proposed 3 μm-long modulator achieves a high modulation depth of 100% at 1550 nm wavelength. Analytical results demonstrate that in this structure, the propagation length of surface plasmons can be dynamically tuned from 0.14 μm in the ‘off’ state (2.3 V bias) to 130 μm in the ‘on’ state (1.5 V bias). Numerical simulation results confirm that structural parameter optimization leads to superior device performance. By selecting a 50 nm radius for the Ag nanowire and maintaining a 15 nm separation between monolayer graphene and the nanowire, the normalized effective mode area is reduced to 0.0032, indicating strong field confinement. Furthermore, calculations reveal that this modulator exhibits exceptional performance metrics, including an ultra-low energy consumption of 0.026 fJ bit−1 and an operational bandwidth of 10.04 THz, surpassing conventional designs. Overall, using suspended graphene- based configurations significantly enhances plasmonic properties while maintaining precise electro-optic tunability, making this architecture a promising candidate for next generation integrated photonics circuits.
015510
The following article is Open access
Yanjie Chang, Jun Zhu, Hao Zhang, Yantao Xu, Chengzhen Liu, Xusheng Xiao and Haitao Guo
This paper systematically investigated the factors affecting the coupling efficiency of a laser with a central wavelength of 4.65 μm into a chalcogenide glass anti-resonant hollow-core fiber. We analyzed critical parameters including the anti-resonant order, incident beam size, transverse offsets, and angular tilt. Our study revealed that optimal mode matching is achieved when the ratio of the input beam waist to the fiber’s core radius is 0.78, which enables a theoretical maximum coupling efficiency of 97%. To validate these findings, we performed experiments with our self-developed chalcogenide glass anti-resonant hollow-core fiber. By implementing a novel bidirectional alignment technique, we demonstrated a record-high coupling efficiency of 76.7%. This experimental result is in agreement with the 85.4% efficiency predicted by our theoretical model, which was calibrated using the practical parameters of the fiber and light source. This research provides a dual contribution. It offers a quantitative theoretical framework for understanding coupling mechanisms and delivers a record-setting experimental result through an innovative design. This work provides essential theoretical guidance for building and optimizing related high-performance experimental systems.
015511
Dipender Singh and Harjit Singh Ghotra
An optimized approach for generating high-field Terahertz (THz) radiation is presented by combining chirped laser pulses with a q-Gaussian laser beam in a density modulated plasma. The laser’s ponderomotive force drives electron drift, which interacts with the modulated plasma ripple to generate a nonlinear current that resonantly excites THz radiation. An analytical formalism is presented for THz generation via the nonlinear mixing of two chirped Gaussian laser beams in a cold plasma. The plasma density and oscillatory velocity combine resulting in a nonlinear current, which at beat frequency drive a THz radiation. By leveraging the benefits of frequency chirp in laser pulses and the peculiarities of the q-Gaussian profile, a significant enhancement in THz generation efficiency is achieved. This work explores how varying chirp parameters and q-Gaussian beam characteristics influence the efficiency and amplitude of the THz field, demonstrating a potential method for scalable THz generation with improved field uniformity and broader spatial reach.
Plasma physics and fusion
015601
Ryoji Tamaki, Masashi Yamakawa, Seiichi Takeuchi and Shinichi Asao
In conventional practice, shielding gas flow during welding has been set empirically, although it is closely related to arc physical phenomena; therefore, the effects of arc plasma changes on gas flow have not been fully clarified. Focusing on TIG welding without continuous filler-metal supply, the authors used particle image velocimetry to investigate how changes in welding current and arc pressure under steady DC conditions affect the shielding gas flow. The phenomenon in which the shielding gas flow is drawn toward the centre of the electrode directly beneath it (the inward component of plasma flow due to the electromagnetic pinch effect) was successfully visualised. Furthermore, it was quantitatively confirmed that increasing the welding current elevates arc pressure and accelerates both the shielding gas flow. For example, when comparing arc pressure at welding currents of 100 A and 200 A, the pressure at 200 A was about 4.2 times higher, and the shielding gas velocity measured at the same position was about 1.7 times faster at 200 A. Experimental and theoretical results both clarified that arc pressure increases in proportion to the square of the welding current, and the acceleration of the flow matches this relationship. While this study has limitations—specifically that it is confined to DC TIG welding and does not clarify the effects of different nozzle diameters, among other factors—its findings nonetheless provide fundamental insights for optimizing welding processes and achieving high-quality joints.
015602
Chitrita Dasgupta
The interaction of two dust acoustic (DA) waves propagating in opposite directions has been investigated in a four component cylindrical plasma. Considering the extended Poincare’-Lighthill-Kuo (PLK) method, a couple of cylindrical KdV-Burger (CKdVB) equations are derived in a weakly dissipative medium. The solitary wave solutions of the CKdVB equations using the weighted residual method are taken into consideration to study the head on collision between the nonlinear DA solitary waves. The investigation includes the effects of oppositely polarized dust particles and nonextensive nonthermal electrons on the fundamental characteristics, such as, amplitude, phase shift due to the collision of the DA solitary waves.
Condensed matter and materials physics
015901
Abhishek Kumar Pandey and Ajay Kumar Mishra
In the 2D material family, MoS2 is a widely studied 2D material. Synthesis has long been a significant challenge, as the production of electrical devices requires reproducibility and uniformity of features. Atmospheric pressure chemical vapor deposition (APCVD) is a precise, efficient, and valuable interfusion method for growing a 2D MoS2 monolayer. In this work, large-area and eminence MoS2 monolayer/bilayer flakes were grown on a silicon (Si/SiO2) substrate using atmospheric pressure CVD. Our results suggest that the morphology of MoS2 can be tuned by varying the precursor weight ratio (Mo :S weight ratio). S-rich condition, resulting in the formation of large-scale MoS2 flakes with a maximum flake size of 50 μm. This work sheds light on producing high-quality, large-scale MoS2 films that can be utilized in the fabrication of other 2D materials.
015902
Ghassan Al-Mahmood, Mohsen Amini, Ebrahim Ghanbari-Adivi and Morteza Soltani
We present an exact analytical investigation of the topological properties and edge states of the Haldane model defined on a honeycomb lattice with zigzag edges. By exploiting translational symmetry along the ribbon direction, we perform a dimensional reduction that maps the two-dimensional model into a family of effective one-dimensional systems parametrized by the crystal momentum kx. Each resulting one-dimensional Hamiltonian corresponds to an extended Su-Schrieffer-Heeger (SSH) model with momentum-dependent hoppings and onsite potentials. We introduce a natural rotated basis in which the Hamiltonian becomes planar and the winding number (ν) is directly computable, providing a clear topological characterization of the reduced model. This framework enables us to derive closed-form expressions for the edge-state wavefunctions and their dispersion relations across the full Brillouin zone. We show that the ν exactly reproduces the Chern number of the parent model in the topologically nontrivial phase and allows for an exact characterization of the edge modes. Analytical expressions for the edge-state wavefunctions and their dispersion relations are derived without requiring perturbative methods. Our analysis further reveals the critical momentum kc where edge states traverse the bulk energy gap, and establishes precise conditions for the topological phase transition. In contrast to earlier models, such as plaquette-based tight-binding reductions, our method reveals hidden geometric symmetries in the extended SSH structure that are essential for understanding the topological behavior of systems with long-range hopping. Our findings offer new insight into the topological features of zigzag nanoribbons and establish a robust framework for analyzing analogous systems. This dimensional reduction perspective may also shed light on other long-range SSH systems and symmetry-protected topological phases in higher-dimensional lattices.
015903
Liushun Wang, Ran Tu, JiaNan Cao, ZhangYang Zhou, DaHua Ren, Du Min, JiaXin Cheng, Teng Zhang, Yuan Zhang, Hanyang Zhang et al
Despite the promise of hexagonal tungsten bronze (h-WO3) as a proton storage host due to its 3.67 Å tunnels and Grotthuss conduction mechanism, its practical application remains limited by irreversible H+ trapping, structural degradation, and sluggish kinetics. To overcome these limitations, we developed a tunnel cation engineering strategy by precisely pre-embedding Na+, K+, or NH4+ ions into h-WO3 tunnels via controlled use of sulfate precursors (Na2SO4, K2SO4, (NH4)2SO4). Structural characterizations confirmed that Na+ pre-embedding yielded optimal lattice matching (0.3842 nm), minimizing distortion, while K+ and NH4+ induced lattice strain and disorder. Electrochemical tests demonstrated that Na+-embedded h-WO3 achieved excellent cycling stability (99% capacity retention after 100 cycles at 100 C) by mitigating due to framework collapse. Although K+/NH4+-doped tungsten bronze nanowires exhibit higher H+ storage capacity, their stability degradation caused by structural defects and reduced dimensions makes the Na+-embedded h-WO3 with an ordered crystalline lattice more advantageous in balancing capacity and durability. Ex situ XRD revealed a two-stage proton storage mechanism in Na+-embedded h-WO3: bare H+ insertion (0.3 V to −0.05 V) led to gradual lattice expansion, whereas hydrated H3O+ insertion (−0.05 V to −0.4 V) triggered rapid ab-plane expansion. This study established a ‘pre-embedded cation-lattice strain-performance’ correlation, offering a new paradigm for designing high-stability proton storage materials.
015904
Jia Liu, YuHang Wen, LuoMeng Chao, JinXiao Bao, GuoQing Liu, XianLi Yang and Feng Chi
The spin photogalvanic effect (SPGE) in Janus monolayer WSSe is systematically studied using nonequilibrium Green’s function (NEGF) combined with density functional theory (DFT), pioneering the investigation of doping-regulated spin optoelectronic effects in this system. Intrinsic defects such as S vacancies, Se vacancies, and Se–S swap defects introduce localized mid-gap states that modulate light absorption and carrier transitions but only marginally affect spin splitting and spin-polarized photocurrents. To enhance SPGE, substitutional doping with transition metals including Fe, Co, and Ni is explored; Ni doping shows the most significant enhancement of spin polarization and photocurrent amplitude, particularly at high photon energies, offering new insights for spin current generation. External bias further modulates the spin current, enabling polarization reversal. These findings highlight a synergistic modulation strategy—combining intrinsic defect engineering, targeted transition-metal doping, and bias control—for optimizing spin-dependent optoelectronic performance in Janus WSSe nanodevices.
015905
Wei Wang, Xing-Guo Wang, Bo-Chen Li and Zhen-Yao Xu
This study conducts Monte Carlo simulation to investigate the dynamic magnetic, thermodynamic properties and magnetocaloric effect of a bilayer graphdiyne-like nanoribbon described by a ferrimagnetic mixed-spin (1/2, 5/2) two-dimensional Ising model applied in a time-dependent magnetic field. The results show that a strong crystal field can reduce critical temperature TC, and an enhanced exchange coupling can increase TC. Extending the oscillation period of the magnetic field from 50 to 1000 also results in a decline in TC, and the peak value of magnetic entropy change reaches its maximum when the oscillation period is 200. The peak value of adiabatic entropy change −ΔSm fluctuates between 0.061 and 0.0738, and is proportional to the variation range of the external magnetic field. As the range in the amplitude of the oscillating field increases from 0 to 2.0, the −ΔSm peak rises significantly. Phase diagrams between the critical temperature and various parameters were also constructed.
015906
The following article is Open access
Joel Hutchinson, Dmitry Miserev, Daniel Loss and Jelena Klinovaja
We present a comprehensive pedagogical introduction to the dimensional reduction protocol (DRP), a versatile framework for analyzing instabilities and critical points in interacting fermionic systems. The DRP simplifies the study of many-body problems by systematically reducing their effective spatial dimension while retaining essential physics. This method works for electron gases in a diverse array of settings: in any number of spatial dimensions, in the presence of Zeeman fields, with spin–orbit coupling, including repulsive or attractive interactions. Focusing on two-point correlation functions, the DRP identifies a minimal subspace relevant for capturing analytic properties, facilitating efficient computation of critical phenomena in electronic systems. This work outlines the assumptions, proof, and applications of the DRP, emphasizing its simplicity and broad applicability for future studies in correlated electron physics.
015907
Khadidja Sassoui
In this study, we present a novel category of sodium based quaternary Heusler compounds. These novel compounds are finding use in thermoelectric devices. Employing density functional theory (DFT) via the Wien2k code, we investigated three specific configurations: Phase I, II and III, all in a cubic structure. The evaluation of band gaps was conducted using both the GGA-PBE method and TB-mBJ calculations. The band gap measurements for the sodium based quaternary Heusler NaZrPtZ (Z: Al, Ga) revealed values of 1.37 eV for NaZrPtAl and 1.38 eV for NaZrPtGa via TB-mBJ, showing that these materials are indirect electronic band structure semiconductors. Mechanical analysis demonstrates their ductile nature and robust stability, comparable to their lithium-based compounds. Both compounds exhibit mechanical and dynamic stability. At room temperature, both compounds exhibit a high Seebeck coefficient with 2050 μV K−1 and 1905.28 μV K−1 for NaZrPtAl and NaZrPtGa, respectively. The value of ZT for NaZrPtAl and NaZrPtGa are 0.43 and 0.51 at 1200 K, respectively. These values suggest NaZrPtZ (Z: Al, Ga) are promising candidates for thermoelectric applications.
015908
Ammu Vijay, S Charan Prasanth, Roshan Jose and K Venkata Saravanan
The present work portrays high temperature thermoelectric performance of CaMnO3 perovskite and its rare earth doped derivatives through trivalent substitutions at Ca-site. Rare earth (RE) dopants such as, Yttrium(Y), Samarium (Sm) and Lanthanum (La) were chosen to investigate the influence of atomic mass and ionic radius on the thermoelectric properties of CaMnO3. The concentration of rare earth (RE) elements was varied from 0.025 to 0.1 with an interval of 0.025. All the samples confirmed to be of orthorhombic structure with no traceable secondary phase or impurity. Trivalent doping causes Jahn - Teller distortion in the CaMnO3 system by inducing Mn3+ in the Mn4+ matrix as result of charge compensation, which was absent in CMO due to the absence of Mn3+. The resulting lattice volume expansion corroborates this effect. Substitution with various rare-earth ions produced comparable enhancements in thermoelectric performance. The structural, transport, and high-temperature thermoelectric properties of n-type CaMnO3 systems are discussed, with La0.1Ca0.9MnO3 achieving the highest zT of ~0.13 at 1073 K.
015909
Haoyu Liu, Yongshui Lin, Weihao Wang and Zhongpeng Li
This paper proposes an acoustic metasurface design based on Helmholtz resonators featuring embedded rings with porous material lining (HRERPL) for broadband low-frequency sound absorption. A theoretical model employing double porosity theory and abrupt cross section theory is developed to investigate the HRERPL’s absorption performance, which is successfully validated by both simulations and experiments. Simulations are conducted to analyze the sound absorption mechanism. The results show that both the embedded rings and the porous material lining are conducive to impedance matching. Parameter analysis demonstrates that broadband frequency tuning of quasi-perfect sound absorption peaks (
) is achievable by adjusting the acoustic properties of porous material and the structural parameters of the HRERPL. By controlling the inner diameter and length of the neck, optimize the HRERPL and compare it with the Helmholtz resonators with porous material lining, further demonstrating the exceptional tunability of the HRERPL. Forming multiple HRERPL subunits into parallel structures enhances sound absorption performance, and optimized design can further broaden the quasi-perfect absorption bandwidth. It is noted that the selection of the optimized frequency bands significantly impacts the outcome. Finally, a parallel structure composed of six HRERPL subunits is designed to achieve quasi-perfect sound absorption across the range of 310 Hz–540 Hz. This result is experimentally verified via the impedance tube test, demonstrating the good low-frequency broadband absorption potential of the HRERPL. This work provides valuable guidance for the design of low-frequency and broadband acoustic absorbing metasurfaces.
015910
Dj Guendouz, H Baaziz, T Ghellab and Z Charifi
This work presents a comprehensive first-principles investigation of the structural, electronic, magnetic, and mechanical properties of the layered titanium dichalcogenides TiX2 (X = S, Se, Te) and their magnetically intercalated variants YTiX2 (Y = Cr, Mn, Fe). All compounds are found to crystallize in the hexagonal 1T-CdI2 structure (space group P
m1), with intercalation occurring at the octahedral site within the van der Waals gap. Our calculations reveal that while the parent TiX2 compounds are non-magnetic semiconductors (TiS2) or metals (TiSe2, TiTe2), intercalation induces a transition to ferromagnetic metallic (CrTiX2, MnTiSe2, MnTiTe2, and FeTiTe2) or half-metallic (MnTiS2, FeTiS2, and FeTiSe2) states, the latter exhibiting 100% spin polarization at the Fermi level—a coveted property for spintronics. Magnetic moment analysis reveals complex interplay between localized moments on the intercalants and induced antiparallel moments on Ti atoms, mediated by strong superexchange coupling. Mechanically, all compounds are stable and exhibit significant anisotropy, which is visually confirmed by 3D representations of elastic moduli. The pristine compounds show classic layer-driven anisotropy (C11 > C33), which is often inverted (C33 > C11) upon intercalation due to a covalent ‘pillaring’ effect. Pugh’s and Poisson’s ratios classify most compounds as brittle with mixed ionic-covalent bonding, with notable exceptions like FeTiSe2 and MnTiTe2 showing a ductile character. This study provides a calculated foundation for experimental work by establishing the elastic stability, predicting structural parameters, and identifying the promising half-metallic ferromagnetism in MnTiS2 and FeTiS2, thereby guiding the targeted synthesis and characterization of these materials for spintronic applications.
015911
Phuc Vu Le and Hanh Thi-Thu Tran
Despite significant progress in the development of fibroin–chitosan composites, the fundamental molecular mechanisms governing their synergistic interactions remain insufficiently understood. In this study, we conduct an in silico investigation to elucidate the interplay between the hierarchical self-assembly of Bombyx mori fibroin and the protonation-dependent, flexible polymeric framework of chitosan under acidic conditions. A unique simulation strategy was employed, combining molecular docking and two complementary molecular dynamics (MD) models, simultaneous and sequential chitosan binding, to probe both cooperative and stepwise interaction pathways. Our dual-model MD framework captures both cooperative and stepwise chitosan binding mechanisms. Comprehensive trajectory analyses, including RMSD, RMSF, radius of gyration, and deformation metrics, reveal key molecular determinants that drive complex formation. Notably, the fibroin–chitosan complex exhibits reduced aggregation tendencies and improved elastic resilience, suggesting mechanical reinforcement induced by chitosan association. These findings highlight the important role of salt bridges and aromatic interactions in stabilizing the composite system. Our simulation results show that chitosan reduces aggregation propensity and enhances fibroin elasticity. By bridging experimental observations with molecular-level insights, this computational framework provides a rational basis for the design of next-generation fibroin-based biomaterials with enhanced mechanical, biological, and physicochemical performance to support advances in personalized and regenerative medicine.
Machine learning with application to physical science
016001
Leyang Wang, Zhao Weifeng, Hao Wu and Can Xi
In order to assess the precision of the parameter estimation of the nonlinear mixed additive and multiplicative errors model, there is a complicated derivative problem. This paper firstly derives the precision assessment formula of the existing solution method of the model based on the approximate function expression method, and then introduces the Monte Carlo method in the probability distribution method of the approximate function to assess the precision of the parameter estimation results of the model, which can avoid the complicated derivative operation. Meanwhile, in response to the low computational efficiency of the Monte Carlo method and the blindness in the selection of the number of simulations, an adaptive Monte Carlo method with relatively stable results is derived by using a given numerical tolerance to obtain the required number of simulations. Finally, through the analysis of the results of the example, it can be concluded that the adaptive Monte Carlo method has wider applicability and potential application prospects.
016002
Zhao Li, Yihao She, Xuzhao Chai, Xiaolei Zhang, Tianyi Zhao, Chi Cao and Fangfang Bian
Obtaining the optimal geometric parameters for a physical device is always a complex and time-consuming process. Aiming to improve the synthetic performance and design efficiency for permanent magnet eddy current coupling (PMECC), a Kriging-assisted multi-objective hierarchical optimization (KMHO) method is proposed in this paper. For the first time, the sensitivity and coupling degree are jointly adopted to stratify the design geometric parameters through the clustering method. Then, the Kriging model is employed to simplify the construction process of the optimization objective function in each layer. Next, the Multi-Objective Genetic Algorithm (MOGA) is used to maximize the output torque and minimize the axial force, and the volume is chosen as the optimal selection basis. Ultimately, the application results indicate that the proposed method can achieve satisfactory design outcome, and significantly reduce the design time, because a single cycle is sufficient for convergence. In addition, further analysis indicates the optimization results also take on excellent performance in non-rated operating conditions. Therefore, the method will provide a reference framework for multi-objective optimization design of other similar physical devices and instruments.
016003
The following article is Open access
Munir S Pathan, S M Pradhan and T Palani Selvam
Thermoluminescence dosimetry plays an important role in occupational radiation monitoring. The area under the glow curve or height of thermoluminescence glow peak serves as a measure of the radiation dose received by dosimeter. The glow curves are often influenced by noise arising from optical density variations of dosimeter (coloration, stains), heating profile instabilities during readout, non-radiation-induced signals, etc. This noise can influence dose estimations, particularly at low dose levels where the signal-to-noise ratio is inherently low, making noise a significant concern. To reduce the noise and enhance the accuracy of dose assessment in calcium sulfate doped with dysprosium (CaSO4:Dy)-based thermoluminescent dosimeters, four distinct machine learning architectures were developed and evaluated, namely, Encoder-Decoder network, one-dimensional Convolutional Neural Network, Long Short-Term Memory network, and Denoising Autoencoder. A dataset needed for the above evaluation was constructed, consisting of experimentally acquired and simulated glow curves. The performance of the above machine learning models was evaluated using metrics such as mean squared error and mean absolute error. The results indicate that all four machine learning algorithms effectively reduced noise, achieving up to a twofold reduction in standard deviation and restoring radiation-induced glow curves even in the presence of substantial noise. This study demonstrates the capability of machine learning to enhance the accuracy of dosimetry in personnel monitoring. The proposed approach is generalizable and can be applied to other thermoluminescent dosimeters beyond CaSO4:Dy.
016004
Kishore babu Dudla and Ravi Kumar Y
Large segmental bone defects remain a major clinical challenge due to limited self-regeneration capable and complications associated with traditional grafting techniques. Bone tissue engineering (BTE) is a solution to address these limitations through the development of porous scaffolds that facilitate bone regeneration and vascularization. In this study, triply periodic minimal surface (TPMS) structures were investigated as potential scaffolds using computational fluid dynamics (CFD) to systematically analyze fluid flow behaviour, permeability, and wall shear stress. Further, several machine learning (ML) models were trained using CFD derived data to predict pressure drop and evaluate scaffold performance. The result shows that scaffold architecture has a more pronounced effect on pressure drop than porosity and inlet velocity. Among the examined designs, the lidinoid TPMS scaffold exhibited higher pressure drop and velocity magnitudes due to its narrow and complex channels, resulting in reduced permeability, although increasing porosity improved permeability. Among the tested ML models, eXtreme gradient boosting and multiple linear regression achieved high accuracy in predicting pressure drop. This integrated CFD and ML framework provides an efficient and cost-effective approach for optimizing TPMS scaffold design without having to do experimental trials, and enabling data-driven customization for clinical bone tissue engineering applications.
016005
Jian Liu, Huiguang Zhang, Xiaoyong Guo and Yibin Qian
In this paper, we systematically evaluate three families of machine learning (ML), which encompass seven specific methods, as residual refinements of a deformed density-dependent cluster model for predicting the α-decay half-life T1/2. In this framework, ML families are trained on the residuals between experimental data and a microscopic DDCM calculation results, exploring their adaptability and robustness on α-decay. It can be observed that distinct characteristics are exhibited by different ML families in the application scenarios of global optimization and extrapolation. This approach thereby enables the ML methods to explore residual interaction from the original Pα description, thereby improving the prediction accuracy of the T1/2. By using SHapley Additive exPlanations (SHAP), the contributions of these features to the ML corrections are quantified, revealing a hierarchy consistent with standard α-decay systematics. The present interpretable combination of ML and a microscopic cluster model thus offers a physics-guided framework to capture key physical correlations in α-decay. Such research is not only instrumental for nuclear physics, but also provides effective references for studies in other complex systems.
016006
Zhenjian Yang, Beining Li, Yadong Chen, Tianying Gao and Yunjie Zhang
This study addresses key challenges in mobile robot path planning within unknown environments, including low exploration efficiency, sparse rewards, and vulnerability to local optima. We propose an improved Q-learning algorithm enhanced with reverse ant colony optimization (RACO), referred to as RAHE-QL. First, RACO releases ant colonies from target points to conduct pre-exploration, and their pheromone distribution is used to initialize the Q-table, thereby reducing ineffective exploration during the early phase. Second, a double-distance heuristic correction coefficient, integrating Euclidean and Chebyshev distances, is introduced to directly influence Q-value updates, which improves search direction, enhances path smoothness, and mitigates abrupt changes. Third, a dual-parameter adaptive exploration rate and a multi-stage exploration strategy are employed to dynamically balance exploration and exploitation, maintaining diversity in early exploration while accelerating convergence in later stages. Experimental results in complex unknown environments demonstrate that RAHE-QL outperforms traditional Q-learning, ant colony optimization (ACO), particle swarm optimization (PSO), and multiple Deep Q-Network (DQN) variants about convergence velocity, path optimality, smoothness, and the effectiveness of computing. The algorithm effectively avoids local optima, demonstrates strong robustness and real-time performance, and offers a reliable solution for efficient path planning in challenging unknown environments.
Comment
Comment and Reply
017001
Francisco M Fernández
We analyse recent results on the vibration-rotational spectra of diatomic molecules. The authors resorted to a potential-energy function that does not satisfy the well-known conditions that define the equilibrium bond length and dissociation energy. The authors claimed to have obtained discrete eigenvalues for a potential that does not support bound states.
Corrigendum
019501
The following article is Free article
Siti Musabikha, Arini Nikitasari, Siska Prifiharni, Rahayu Kusumastuti, Yulinda Lestari, Ahmad Royani, Gadang Priyotomo, Joko Triwardono, Puspa Dewi Narrij Lotulung, Dieva Amelia Putri et al