Letter
50LT01
Pei-Chun Yeh, Genki Ohkatsu, Ryo Toyama, Phan Trong Tue, Kostya (Ken) Ostrikov, Yutaka Majima and Wei-Hung Chiang
Single-electron transistors (SETs) represent a new generation of electronic devices with high charge sensitivity, high switching speed, and low power consumption. Here a simple and controlled fabrication of graphene quantum dot (GQD)-based SETs for photon detectors has been demonstrated. The plasma-synthesized GQDs exhibit stable photoluminescence and are successfully used as the Coulomb islands between heteroepitaxial spherical-gold/platinum (HS-Au/Pt) nanogap electrodes. The as-fabricated GQD-SETs enable photon detection with 410 nm excitation owing to the ability of GQDs to generate photoluminescence emission.
Topical Reviews
502001
Sheetal Kaushik Bhardwaj, Mubarak Mujawar, Yogendra Kumar Mishra, Nicoleta Hickman, Murthy Chavali and Ajeet Kaushik
The increasing demands of environmentally sustainable, affordable, and scalable materials have inspired researchers to explore greener nanosystems of unique properties which can enhance the performance of existing systems. Such nanosystems, extracted from nature, are state-of-art high-performance nanostructures due to intrinsic hierarchical micro/nanoscale architecture and generous interfacial interactions in natural resources. Among several, bio-inspired nanosystems graphene nanosystems have emerged as an essential nano-platform wherein a highly electroactive, scalable, functional, flexible, and adaptable to a living being is a key factor. Preliminary investigation project bio-inspired graphene nanosystems as a multi-functional nano-platform suitable for electronic devices, energy storage, sensors, and medical sciences application. However, a broad understanding of bio-inspired graphene nanosystems and their projection towards applied application is not well-explored yet. Considering this as a motivation, this mini-review highlights the following; the emergence of bio-inspired graphene nanosystems, over time development to make them more efficient, state-of-art technology, and potential applications, mainly biomedical including biosensors, drug delivery, imaging, and biomedical systems. The outcomes of this review will certainly serve as a guideline to motivate scholars to design and develop novel bio-inspired graphene nanosystems to develop greener, affordable, and scalable next-generation biomedical systems.
502002
Halid Mulaosmanovic, Evelyn T Breyer, Stefan Dünkel, Sven Beyer, Thomas Mikolajick and Stefan Slesazeck
In this article, we review the recent progress of ferroelectric field-effect transistors (FeFETs) based on ferroelectric hafnium oxide (HfO2), ten years after the first report on such a device. With a focus on the use of FeFET for nonvolatile memory application, we discuss its basic operation principles, switching mechanisms, device types, material properties and array structures. Key device performance metrics such as cycling endurance, retention, memory window, multi-level operation and scaling capability are analyzed. We also briefly survey recent developments in alternative applications for FeFETs including neuromorphic and in-memory computing as well as radiofrequency devices.
502003
Ding Zhang and Joseph Falson
Ising-type pairing in atomically thin superconducting materials has emerged as a novel means of generating devices with resilience to a magnetic field applied parallel to the two-dimensional (2D) plane. In this mini-review, we canvas the state of the field by giving a historical account of 2D superconductors with strongly enhanced in-plane upper critical fields, together with the type-I and type-II Ising pairing mechanisms. We highlight the vital role of spin–orbit coupling in these superconductors and discuss other effects such as symmetry breaking, atomic thicknesses, etc. Finally, we summarize the recent theoretical proposals and highlight the open questions, such as exploring topological superconductivity in these systems and looking for more materials with Ising pairing.
502004
Ruiqi Liu, Shusheng Xu, Xiaoxuan Shao, Yi Wen, Xuerong Shi, Jing Hu and Zhi Yang
During the past decades, nano-structured metal oxide electrode materials have received growing attention due to their low development cost and high theoretical specific capacity, accordingly, quite a lot of metal oxide electrode materials are being used in electrochemical energy storage devices. However, the further development was limited by the relatively low electrical conductivity and the volume expansion during electrochemical reactions. Thus, many approaches have been proposed to obtain high-efficiency metal oxide electrode materials, such as designing nanomaterials with ideal morphology and high specific surface area, optimizing with carbon-based materials (such as graphene and glucose) to prepare nanocomposites, combining with conductive substrates to enhance the conductivity of electrodes, etc. Owning to the advantages of low cost and high chemical stability of carbon materials, core–shell structure formed by carbon-coated metal oxides is considered to be a promising solution to solve these problems. Therefore, this review mainly focuses on recent research advances in the field of carbon-coated metal oxides for energy storage, summarizing the advantages and disadvantages of common metal oxides and different types of carbon sources, and proposing methods to optimize the material properties in terms of structure and morphology, carbon layer thickness, coating method, specific surface area and pore size distribution, as well as improving electrical conductivity. In addition, the double or multi-layer coating strategy is also a reflection of the continuous development of carbon coating method. Hopefully, this rereview may provide a new direction for the renewal and development of future energy storage electrode materials.
502005
The following article is Open access
Josefine D McBrayer, Christopher A Apblett, Katharine L Harrison, Kyle R Fenton and Shelley D Minteer
A stable solid electrolyte interphase (SEI) layer is key to high performing lithium ion and lithium metal batteries for metrics such as calendar and cycle life. The SEI must be mechanically robust to withstand large volumetric changes in anode materials such as lithium and silicon, so understanding the mechanical properties and behavior of the SEI is essential for the rational design of artificial SEI and anode form factors. The mechanical properties and mechanical failure of the SEI are challenging to study, because the SEI is thin at only ~10–200 nm thick and is air sensitive. Furthermore, the SEI changes as a function of electrode material, electrolyte and additives, temperature, potential, and formation protocols. A variety of in situ and ex situ techniques have been used to study the mechanics of the SEI on a variety of lithium ion battery anode candidates; however, there has not been a succinct review of the findings thus far. Because of the difficulty of isolating the true SEI and its mechanical properties, there have been a limited number of studies that can fully de-convolute the SEI from the anode it forms on. A review of past research will be helpful for culminating current knowledge and helping to inspire new innovations to better quantify and understand the mechanical behavior of the SEI. This review will summarize the different experimental and theoretical techniques used to study the mechanics of SEI on common lithium battery anodes and their strengths and weaknesses.
502006
Huanming Zhang, Min Zhou, Huaping Zhao and Yong Lei
Clean and efficient energy conversion systems can overcome the depletion of the fossil fuel and meet the increasing demand of the energy. Ordered nanostructures arrays convert energy more efficiently than their disordered counterparts, by virtue of their structural merits. Among various fabrication methods of these ordered nanostructures arrays, anodic aluminum oxide (AAO) template-directed fabrication have drawn increasing attention due to its low cost, high throughput, flexibility and high structural controllability. This article reviews the application of ordered nanostructures arrays fabricated by AAO template-directed methods in mechanical energy, solar energy, electrical energy and chemical energy conversions in four sections. In each section, the corresponding advantages of these ordered nanostructures arrays in the energy conversion system are analysed, and the limitation of the to-date research is evaluated. Finally, the future directions of the ordered nanostructures arrays fabricated by AAO template-directed methods (the promising method to explore new growth mechanisms of AAO, green fabrication based on reusable AAO templates, new potential energy conversion application) are discussed.
502007
Bina Chaudhary, Yuwaraj K Kshetri, Hak-Soo Kim, Soo Wohn Lee and Tae-Ho Kim
The quantum confinement effect and interesting optical properties of cesium lead halide (CsPbX3; X = Cl, Br, I) perovskite quantum dots (QDs) and nanocrystals (NCs) have given a new horizon to lighting and photonic applications. Given the exponential rate at which scientific results on CsPbX3 NCs are published in the last few years, it can be expected that the research in CsPbX3 NCs will further receive increasing scientific interests in the near future and possibly lead to great commercial opportunities to realize these materials based practical applications. With the rapid progress in the single-photon emitting CsPbX3 QDs and NCs, practical applications of the quantum technologies such as single-photon emitting light-emitting diode, quantum lasers, quantum computing might soon be possible. But to reach at cutting edge of stable perovskite QDs/NCs, the study of fundamental insight and theoretical aspects of crystal design is yet insufficient. Even more, it has aroused many unanswered questions related to the stability, optical and electronic properties of the CsPbX3 QDs. Aim of the present review is to illustrate didactically a precise study of recent progress in the synthesis, properties and applications of CsPbX3 QDs and NCs. Critical issues that currently restrict the applicability of these QDs will be identified and advanced methodologies currently in the developing queue, to overcome the roadblock, will be presented. And finally, the prospects for future directions will be provided.
502008
Xue Ren, Song Zhang, Leijing Liu, Bin Xu and Wenjing Tian
Image-guided therapy, with simultaneous imaging and therapy functions, has the potential to greatly enhance the therapeutic efficacy of anticancer therapy, and reduce the incidence of side effects. Fluorescence imaging has the advantages of easy operation, abundant signal, high contrast, and fast response for real-time and non-invasive tracking. Luminogens with aggregation-induced emission characteristics (AIEgens) can emit strong luminescence in an aggregate state, which makes them ideal materials to construct applicative fluorophores for fluorescence imaging. The opportunity for image-guided cancer treatment has inspired researchers to explore the theranostic application of AIEgens combined with other therapy methods. In recent years, many AIEgens with efficient photosensitizing or photothermal abilities have been designed by precise molecular engineering, with superior performance in image-guided anticancer therapy. Owing to the hydrophobic property of most AIEgens, an assembly approach has been wildly utilized to construct biocompatible AIEgen-based nanostructures in aqueous systems, which can be used for image-guided anticancer therapy. In the present review, we summarize the recent advances in the assembled AIEgens for image-guided anticancer therapy. Five types of image-guided anticancer therapy using assembled AIEgens are included: chemotherapy, photodynamic therapy, photothermal therapy, gene therapy, and synergistic therapy. Moreover, a brief conclusion with the discussion of current challenges and future perspectives in this area is further presented.
502009
Evgenia Dimitriou and Nikolaos Michailidis
In recent years, a wide range of electronic materials with a great diversity in their chemical and physical properties has been patterned by printing techniques on a variety of substrates. Nanotechnology-based materials appear to be the most promising thereof, increasing the resolution of the printed raster and enhancing the electrical properties of the final patterns. Conductive nanoparticle inks are the main building block of all printed electronic devices and circuit boards, forming their fundamental structure and integrated low-resistance circuit interconnects, antennae, contact electrodes within transistors etc. A plethora of both conventional and novel printing techniques have been employed with nanoparticle-based inks for the fabrication of conductive patterns, dictating different limitations for the properties of the printed inks. Although several articles have reviewed printing techniques of nanomaterials, a comprehensive review on physicochemical properties that need to be considered in order to develop nanoparticle-based conductive inks, sufficiently compatible with each printing technique, is missing. This review firstly summarizes a wide range of printing techniques that are of high potential for printing electronics and then narrows them down to those applied with conductive nanoparticle inks. Next, it focuses on the typical properties of nanoparticle-based conductive inks (chemical composition, particle size and shape, solids loading, ink viscosity and surface tension) and suggests parameters that need to be taken into account when preparing conductive nanotechnology-based inks, corresponding the requirements of each printing technique. General principles that determine the electrical conductivity of the printed patterns are outlined. Lastly, future prospects on the development of novel printable materials are laid out.
Papers
Biology and medicine
505101
Aihik Banerjee, Tanvi Jariwala, Youn-Kyung Baek, Dung Thi Hanh To, Youyi Tai, Junze Liu, Hyle Park, Nosang V Myung and Jin Nam
The drawbacks of conventional drug administration include repeated administration, non-specific biodistribution in the body’s systems, the long-term unsustainability of drug molecules, and high global cytotoxicity, posing a challenge for the efficient treatment of chronic diseases that require varying drug dosages over time for optimal therapeutic efficacy. Most controlled-release methods encapsulate drug molecules in biodegradable materials that dissolve over time to release the drug, making it difficult to deliver drugs on a schedule. To address these limitations, we developed a magneto-, opto-stimuli responsive drug delivery system based on functionalized electrospun nanofibers loaded with superparamagnetic iron oxide nanoparticles (SPIONs). We exploited the Néel relaxation effect of SPIONs, where heat generated from vibrating SPIONs under exogenously applied magnetic fields or laser illumination induced structural changes of the thermo-sensitive nanofibers that encapsulate the particles. We showed that this structural change of nanofibers is the governing factor in controlling the release of dye molecules, used as a model drug and co-encapsulated within the nanofibers. We also showed that the degree of nanofiber structural change depends on SPION loading and duration of stimulation, demonstrating the tunability of the drug release profile. Overall, we demonstrated the potential of SPION-embedded thermoplastic nanofibers as an attractive platform for on-demand drug delivery.
505102
Reena Badhwar, Bharti Mangla, Yub Raj Neupane, Kushagra Khanna and Harvinder Popli
Quercetin (QCT) is an effective antioxidant, antifibrotic and wound healing agent. Silver nanoparticles (AgNPs) are an effective antimicrobial, antifungal and wound healing agent and considered as gold standard for wound treatment especially diabetic and burn wounds. The present study aimed to investigate QCT loaded AgNPs in hydrogel matrices (QCT-AgNPs hydrogel) as synergistic treatment paradigms for diabetic wound. Quality by Design approach was employed for the optimization of hydrogel preparation using carbopol-934 and aloevera. The developed QCT-AgNPs hydrogel was characterized for hydrodynamic diameter, %entrapment efficiency (%EE), surface morphology, texture analysis, in-vitro drug release, skin irritation study, ex-vivo permeation study (confocal study), and antimicrobial efficacy. The optimized formulation showed hydrodynamic diameter of ∼44.1 nm with smooth spherical surface morphology and ∼92.09% of QCT was entrapped in QCT-AgNPs hydrogel matrices. The antimicrobial study revealed superior therapeutic efficacy of QCT-AgNPs hydrogel in comparison to marketed (MRKT) gel on S. aureus and E. coli. Moreover, in-vivo results demonstrated that QCT-AgNPs hydrogel significantly (p < 0.001) reduced the wound gap and increased % re-epithelialization compared with diabetic control after 18 d of post treatment in excisional diabetic wound model. In conclusion, this study opens up an avenue for the treatment of diabetic wound.
505103
Lena Golubewa, Tatsiana Kulahava, Igor Timoshchenko, Mikhail Shuba, Yuri Svirko and Polina Kuzhir
Single-walled carbon nanotubes (SWCNTs) demonstrate a strong potential as an optically activated theranostic nano-agent. However, using SWCNTs in theranostics still requires revealing mechanisms of the SWCNT-mediated effects on cellular functions. Even though rapid and delayed cellular responses can differ significantly and may lead to undesirable consequences, understanding of these mechanisms is still incomplete. We demonstrate that introducing short (150–250 nm) SWCNTs into C6 rat glioma cells leads to SWCNT-driven effects that show pronounced time dependence. Accumulation of SWCNTs is carried out due to endocytosis with modification of the actin cytoskeleton but not accompanied with autophagy. Its initial stage launches a rapid cellular response via significantly heightened mitochondrial membrane potential and superoxide anion radical production, satisfying the cell demand of energy for SWCNT transfer inside the cytoplasm. In the long term, SWCNTs agglomerate to micron-sized structures surrounded by highly active mitochondria having parameters return to control values. SWCNTs postponed effects are also manifested themselves in the suppression of the cell proliferative activity with further restoration after five passages. These results demonstrate relative cellular inertness and safety of SWCNTs eliminating possible side effects caused by optically activated theranostic applications.
505104
Yunchun Li, Songtao Xie, Dan Xu, Gang Shu and Xianxiang Wang
In light of emerging antibiotic resistance, synthesis of active, environmental friendly antimicrobial alternatives becomes increasingly necessary. In this study, ZnO quantum dots (ZnO QDs) were developed by the sol–gel method and characterized. The antibacterial activities of ZnO QDs against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Salmonella Pullorum (S. Pullorum) were systematically investigated. Moreover, the protective effects of ZnO QDs on Salmonella-caused pullorosis in chicks were also explored. The results indicated that the size range of ZnO QDs was 3–6 nm. Antibacterial results showed that ZnO QDs treatment inhibited the growth of E. coli, S. aureus, and S. Pullorum in the rate of 87.06 ± 0.98%, 94.75 ± 2.28%, and 85.55 ± 1.15%, respectively. Its excellent antibacterial property was manifested with the minimum inhibitory concentration of 0.7812, 0.0976, and 0.1953 mg ml−1, which may be attributed to the production of reactive oxygen species, the dissolution of Zn2+ ions, and the loss of cell integrity. Furthermore, in the in vivo test, the ZnO QDs effectively reduced the mortality of chicks infected with S. Pullorum via regulating the balance of the intestinal flora, protecting liver and intestine, and modulating the balance of antioxidation systems. This study reveals that ZnO QDs exerts remarkably antibacterial activity in vitro and anti-pullorosis effect in chicks.
505105
Jinkai Tang, Moumita Rakshit, Huei Min Chua, Anastasia Darwitan, Luong T H Nguyen, Aristo Muktabar, Subbu Venkatraman and Kee Woei Ng
Liposomes are potential drug carriers for atherosclerosis therapy due to low immunogenicity and ease of surface modifications that allow them to have prolonged circulation half-life and specifically target atherosclerotic sites to increase uptake efficiency. However, the effects of their size, charge, and lipid compositions on macrophage and foam cell behaviour are not fully understood. In this study, liposomes of different sizes (60 nm, 100 nm and 180 nm), charges (−40 mV, −20 mV, neutral, +15 mV and +30 mV) and lipid compositions (1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, L-a-phosphatidylcholine, and egg sphingomyelin) were synthesized, characterized and exposed to macrophages and foam cells. Compared to 100 nm neutral 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) liposomes, flow cytometry and confocal imaging indicated that cationic liposomes and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DSPC) liposomes were internalized more by both macrophages and foam cells. Through endocytosis inhibition, phagocytosis and clathrin-mediated endocytosis were identified as the dominant mechanisms of uptake. Anionic and DSPC liposomes induced more cholesterol efflux capacity in foam cells. These results provide a guide for the optimal size, charge, and lipid composition of liposomes as drug carriers for atherosclerosis treatment.
Electronics and photonics
505201
Jaehyeok Shin, Sangmoon Han, Siyun Noh, Yeon-Tae Yu and Jin Soo Kim
We report the successful demonstration of a light-assisted NO2 gas sensor that operates at room temperature with high response. The gas sensor was fabricated with high-crystalline undoped-GaN nanowires (NWs) and graphene functioning as the light-absorbing medium and carrier channel, respectively. Exposure of the gas sensor to the NO2 concentration of 100 ppm at a light intensity of 1 mW cm−2 of a xenon lamp delivered a response of 16% at room temperature, which increased to 23% when the light intensity increased to 100 mW cm−2. This value is higher than those previously reported for GaN-based NO2 gas sensors operating at room temperature. The room-temperature response of the gas sensor measured after six months was calculated to be 21.9%, which corresponds to 95% compared to the value obtained immediately after fabricating the devices. The response of the gas sensor after independently injecting NO2, H2S, H2, CO, and CH3CHO gases were measured to be 23, 5, 2.6, 2.2, and 1.7%, respectively. These results indicate that the gas sensor using GaN NWs and graphene provides high response, long-term stability, and good selectivity to NO2 gas at room temperature. In addition, the use of undoped-GaN NWs without using additional catalysts makes it possible to fabricate gas sensors that operate at room temperature simpler and better than conventional technologies.
505202
Rahul P Patel, Pratik M Pataniya, Meswa Patel and C K Sumesh
The paper-based photodetector has recently captivated a great deal of attention in various opto-electronics applications because of facile, cost effective and green synthesis. Two-dimensional transition metal dichalcogenides materials are promising for photodetection under the broad spectral range. In this work, we have fabricated paper-based device by rubbing the tungsten di-selenide (WSe2) crystals on paper substrate. Low-cost, facile and green synthesis technique was employed to make a high-performance paper-based WSe2 photodetector. Paper-based photodetector was fabricated via non-toxic simply rubbing process of WSe2 nanosheets on low-cost bio-degradable paper. The photodetector shows good responsivity of 72.5 μA W−1 and detectivity at around 2.4 × 107 Jones at very low bias (1.0 V) at wavelength of 780 nm, respectively. Due to good photo-absorption strength, photodetector exhibits excellent photo-response over wide wavelength range from visible to near infrared. This device also shows very good flexibility with a stable photo-response. This device shows a general and reliable study for the design of photodetectors that is eco-friendly and cost-effective. Overall studied results of the fabricated device indicate that they have the ability to be used in large-scale preparation of the device.
505203
Wonsik Choi, Guoqiang Zhang, Hsien Chih Huang, Parsian Katal Mohseni, Chen Zhang, Jeong Dong Kim and Xiuling Li
Semiconductor p–n junctions are essential building blocks of electronic and optoelectronic devices. Although vertical p–n junction structures can be formed readily by growing in sequence, lateral p–n junctions normal to surface direction can only be formed on specially patterned substrates or by post-growth implantation of one type of dopant while protecting the oppositely doped side. In this study, we report the monolithic formation of lateral p–n junctions in GaAs nanowires (NWs) on a planar substrate sequentially through the Au-assisted vapor–liquid–solid selective lateral epitaxy using metalorganic chemical vapor deposition. p-type and n-type segments are formed by modulating the gas phase flow of p-type (diethylzinc) and n-type (disilane) precursors in situ during nanowire growth, allowing independent sequential control of p- and n-doping levels self-aligned in-plane in a single growth run. The p–n junctions formed are electrically characterized by fabricating arrays of p–n junction NW diodes with coplanar ohmic metal contacts and two-terminal I–V measurements. The lateral p–n diode exhibits a 2.15 ideality factor and a rectification ratio of ∼106. The electron beam-induced current measurement confirms the junction position. The extracted minority carrier diffusion length is much higher compared to those previously reported, suggesting a low surface recombination velocity in these lateral NWp–n diodes.
505204
Yuanzhen Du, Dawei Cao, Yuan Liu and Quan Wang
Adding conductive graphene into polyvinyliden1 fluoride (PVDF) is an effective method to improve the dielectric properties. However, the high conductivity and uniform distribution of graphene in PVDF matrix still meet challenges. In this work, electrochemical exfoliated graphite (EEG) with good conductivity and solution dispersion is used to prepare PVDF/EEG films. By this method no specific conditions are needed such as reduction or hot press. The dielectric properties and flexibility of PVDF/EEG films of different concentrations of EEG are investigated. Especially, when EEG content is 2.6 wt%, composite film has a high dielectric constant of 86 and a low dielectric loss of 0.9 (100 Hz). Simultaneously, the tensile strength of the film was up to 55.1 MPa. The preparation method is simple and convenient, and the obtained material has high dielectric constant and tensile strength. This method paves the way for the application of flexible electronic sensing equipment.
505205
The following article is Open access
Zehao Song, Masiar Sistani, Lukas Wind, Darius Pohl, Bernd Rellinghaus, Walter M Weber and Alois Lugstein
To establish high-bandwidth chip-to-chip interconnects in optoelectronic integrated circuits, requires high-performance photon emitters and signal receiving components. Regarding the photodetector, fast device concepts like Schottky junction devices, large carrier mobility materials and shrinking the channel length will enable higher operation speed. However, integrating photodetectors in highly scaled ICs technologies is challenging due to the efficiency-speed trade-off. Here, we report a scalable and CMOS-compatible approach for an ultra-scaled germanium (Ge) based photodetector with tunable polarity. The photodetector is composed of a Ge Schottky barrier field effect transistor with monolithic aluminum (Al) source/drain contacts, offering plasmon assisted and polarization-resolved photodetection. The ultra-scaled Ge photodetector with a channel length of only 200 nm shows high responsivity of about R = 424 A W−1 and a maximum polarization sensitivity ratio of TM/TE = 11.
505206
Xiaodan Huang, Chao Qiu, Xiaofeng Ji, Shijun Wang and Guojian Shao
An all-dielectric periodic array is proposed to form plasmon lattice resonances (PLR). In the array, Si nanopillars are on top of SiO2 nanopillars, and SiO2 nanopillars are on top of quartz substrates. The simulated results show that the line-width of the PLR can be as small as 3.3 nm. This can be attributed to the coupling between the Mie resonances of Si nanopillars and the diffracted waves. While the PLR can’t be formed by the periodic Si nanopillar array directly sitting on quartz substrates. The diameter and height of Si nanopillars, the period of the array and the height of SiO2 nanopillars have significant impacts on the PLR. This work extends the application of PLR.
505207
Remy H H Ko, Moein Shayegannia, Sidra Farid and Nazir P Kherani
Surface-enhanced Raman scattering (SERS) substrates with multiwavelength rainbow-trapping properties hold the potential for a one-size-fits-all platform for rapid and multiplexed disease detection. We present the first report on the utilization of rainbow-trapping width-graded nano-gratings, a new class of chirped metamaterials, to detect protein biomarkers. Using cytochrome c (Cc), a charged analyte with inherent difficulty in adsorbing onto sputtered silver films, we investigated methods of binding Cc on the silver nano-grating in order to improve the SERS signal strength at both 532 and 638 nm excitation. Cc was not detectable on the Ag nano-gratings without surface functionalization at 1 μM concentration. Upon charge reversal functionalization of the Ag nano-gratings, 1 μM Cc was detectable albeit not reliably. By further crosslinking 1 μM Cc to the functionalized Ag nano-gratings, the analyte-capture detection scheme greatly improved the SERS signal strength and reliability at both excitation wavelengths and allowed for quantification of their coefficients of variation with values down to 27%.
505208
Xin Zhai, Peng Dong, Wenxian Wang, Jing Jia, Lifang Hu and Guodong Feng
Silver nanowires (AgNWs) have been considered as one of the most promising flexible transparent electrodes (FTEs) material for next-generation optoelectronic devices. However, the large contact resistance between AgNWs could deteriorate the conductivity of FTEs. In the present work, high-performance AgNWs FTEs were obtained by means of focused-light-scanning (FLS), which could lead to the large-area, rapid and high-quality welding between AgNWs within a short time, forming the reliable and stable AgNWs network. The results of the optoelectronic tests show that after FLS, the sheet resistance of the AgNWs FTEs sharply decreased from 5113 Ω/sq to 7.7 Ω/sq, with maintaining a high transmittance (∼94%). Finally, a high-performance flexible transparent heater was fabricated by using FLS, showing reach a relatively high temperature in a short response time and rapid response at low input voltage. The findings offer an effective pathway to greatly improve the conductivity of AgNWs FTEs.
505209
The following article is Open access
Maximilian M Sonner, Maximilian Gnedel, Johannes C Berlin, Daniel Rudolph, Gregor Koblmüller and Hubert J Krenner
The authors report on a combined structural, optical and acousto-electric study of polytypic GaAs nanowires. Two types of nanowires with different zincblende and wurtzite crystal phase mixing are identified by transmission electron microscopy and photoluminescence spectroscopy. The nanowires exhibit characteristic recombination channels which are assigned to different types of spatially direct recombination (electron and hole within the same crystal phase segment) and spatially indirect recombination (electron and holes localized in different segments). Contact-free acousto-optoelectric spectroscopy is employed to resolve spatiotemporal charge carrier dynamics between different recombination channels induced by a piezoelectric surface acoustic wave. The observed suppression of the emission and its dynamic temporal modulation shows unambiguous fingerprints of the local bandedge variations induced by the crystal phase mixing. A nanowire, which exhibits a variation from a near-pristine zinc blende crystal structure to a highly mixed crystal phase, shows a clear dependence on the propagation direction of the acoustic wave. In contrast, no pronounced directionality is found for a nanowire with an extended near-pristine zincblende segment. The experimental findings are corroborated by solving the drift and diffusion equations of electrons and holes induced by the surface acoustic wave. The key characteristics observed in our experimental data are well reproduced in the numerical simulations by assuming two general bandedge modulations and realistic parameters for the bandedge discontinuities and transport mobilities of electrons and holes. This evidences that even all relevant physical processes are accounted for in the model.
Patterning and nanofabrication
505301
Shady Sayed and P R Selvaganapathy
Nanoimprint lithography is an emerging technology to form patterns and features in the nanoscale. Production of nanoscale patterns is challenging particularly in the sub-50 nm range. Pre-stressed polymer films with embedded microscale pattern can be miniaturized by shrinking induced due to thermal stress release. However, when pre-stressed films are thermally nanoimprinted with sub-micron features and shruken, they lose all the topographical features due to material recovery. Here we report a new approach that prevents recovery and allows retention of shrunken patterns even at the scale of <50 nm. We have discovered that when the shrinking process is mechanically constrained in one direction, the thermal treatment only relieves the stress in the orthogonal direction leading to a uniaxial shrinkage in that direction while preserving the topographical features. A second step, with the constraint in the orthogonal direction leads to biaxial shrinkage and preservation of all of the topographical features. This new technique can produce well defined and high resolution nanostructures at dimensions below 50 nm. The process is programmable and the thermal treatment can be tuned to shrink features to various dimension below the original imprint which we use to produce tunable and gradient plasmonic structures.
505302
Abdur Rehman, Qunyi Tong, Sameh A Korma, Wen Han, Aiman Karim, Hafiz Rizwan Sharif, Ahmad Ali, Sanabil Yaqoob, Salah A Khalifa and Ilaria Cacciotti
Borage seed oil (BSO), peppermint oil (PO) and lycopene (LC) have accomplished a lot of interest due to their therapeutic benefits in the food and pharmaceutical sectors. However, their employment in functional food products and dietary supplements is still precluded by their high susceptibility to oxidation. Thus, the encapsulation can be applied as a promising strategy to overcome these limits. In the present study, doubly layered water/oil/water (W/O/W) nanoemulsions were equipped using purity gum ultra (PGU), soy protein isolate (SPI), pectin (PC), whey protein isolate (WPI) and WPI-PC and SPI-PC complexes, and their physico-chemical properties were investigated. Our aim was to investigate the influence of natural biopolymers as stabilizers on the physicochemical properties of nanoemulsified BSO, PO and lycopene thru W/O/W emulsions. The droplet size of the fabricated emulsions coated with PGU, WPI, SPI, PC, WPI-PC, and SPI-PC was 156.2, 265.9, 254.7, 168.5, 559.5 and 656.1 nm, correspondingly. The encapsulation efficiency of the entrapped bioactives for powders embedded by PGU, WPI, SPI, PC, WPI-PC, and SPI-PC was 95.21%, 94.67%, 97.24%, 92.19%, 90.07% and 92.34%, respectively. In addition, peroxide and p-anisidine values were used to measure the antioxidant potential of the entrapped bioactive compounds during storage, which was compared to synthetic antioxidant and bare natural antioxidant. The collected findings revealed that oxidation occurred in oils encompassing entrapped bioactive compounds, but at a lower extent than for non-encapsulated bioactives. In summary, the findings obtained from current research prove that the nanoencapsulation of BSO surrounded by innermost aqueous stage of W/O/W improved its stability as well as allowed a controlled release of the entrapped bioactives. Thus, the obtained BSO-PO-based systems could be successfully used for further fortification of food-stuffs.
505303
Zhong-Yun Chen, Hong-Zhong Cao, Liang-Cheng Cao, Gan Fang and Xuan-Ming Duan
In this paper, silver micro/nanostructures composed of sintered nanoparticles were printed by capturing silver nanoparticles in water with 800 nm femtosecond laser trapping. Relationships of laser power, scanning speed, nanoparticle concentration, and the width and morphology of fabricated silver wire were systematically investigated. It is found that low scanning speed and high nanoparticle concentration favor the printing of silver wire with good morphology. A silver wire with width of 305 nm was printed. Electrical resistivities of printed wires are about 24 times that of bulk silver. Silver grid structures and dot arrays were printed by using this technology. Several three-dimensional silver cuboid structures were also printed. This work provides a protocol for printing of three-dimensional metallic micro/nanostructures using laser trapping. These printed structures have great application prospects in metamaterials, flexible electronics, and SERS.
Energy at the nanoscale
505401
Yang Gao, Yakun Tang, Wei Liu, Lang Liu, Xingyan Zeng and Siqi Yan
Increasing the specific surface area and the amount of doping heteroatoms is an effective means to improve the electrochemical properties of carbon nanotubes (CNTs). The usual activation method makes it difficult for the retention of the heteroatoms while enlarging the specific surface area, and it can be found from literatures that specific surface area and S-content of carbon-based electrode materials are mutually exclusive. Here, CNTs with high specific surface area and sulfur content are constructed by simple activation of sulfonated polymer nanotubes with KHCO3, and the excellent electrochemical performance can be explained by the following points: first, KHCO3 can be decomposed into K2CO3, CO2 and H2O during the activation process. The synergistic action of physical activation (CO2 and H2O) and chemical activation (K2CO3) equips the electrode material with high specific surface area of 1840 m2 g−1 and hierarchical micro/mesopores, which is beneficial to its double-layer capacitance. Second, compared with reported porous CNTs prepared by chemical activation (KOH) or physical activation (CO2 or H2O), the mild activator KHCO3 makes the sulfur content at a high level of 4.6 at%, which is very advantageous for high pseudocapacitance performance.
505402
Davi Marcelo Soares and Gurpreet Singh
Alkali metals such as sodium and potassium have become promising candidates for the next generation of monovalent-ion batteries. However, a challenge for these battery technologies lies in the development of electrode materials that deliver high capacity and stable performance even at high cycling currents. Here we study orthorhombic tungsten ditelluride or Td-WTe2 as an electrode material for sodium- (SIB) and potassium-ion batteries (KIB) in propylene carbonate (PC) based electrolyte. Results show that despite larger Shannon’s radius of potassium-ions and their sluggish diffusion in Td-WTe2 due to higher overpotential, at 100 mA.g−1 KIB-half cells showed higher cycling stability and low capacity decay of 4% versus 16% compared to SIB-half cells. Likewise, in a rate capability test at 61st cycle (at 50 mA.g−1), the KIB-half cells yielded charge capacity of 172 mAh.g−1 versus 137 mAh.g−1 of SIB-half cells. The superior electrochemical performance of Td-WTe2 electrode material in KIB-half cells is explained based on the concept of Stokes’ radius—smaller desolvation activation energy resulted in higher mobility of potassium-ions in PC-based electrolyte. In addition, the likely mechanisms of electrochemical insertion and extraction of Na- and K-ions in Td-WTe2 are also discussed.
505403
Yang Zhao, Shiwei Xu, Kexin Zhou, Tian Tian, Zhi Yang, Yanjie Su, Ying Wang, Yafei Zhang and Nantao Hu
Anode materials based on lithium titanate (LTO)/graphene composites are considered as ideal candidates for high-rate lithium-ion batteries (LIBs). Considering the blocking effects of graphene nanosheets in electrodes during ion-transfer processes, construction of LTO/graphene composite structures with enhanced electrical and ionic conductivity via facile and scalable techniques is still challenging for high-rate LIB. In this work, structures of anode materials based on LTO nanoplates embedded with graphene quantum dots (GQDs) are demonstrated for high-rate LIB. The hybrids can be facilely prepared via in situ introduction of GQDs during the process LTO preparation, which enables a uniform dispersion of GQDs within LTO. This method is convenient, rapid, and can be easily scaled-up. The introduction of 0.05 wt.% GQDs can greatly enhance the electrochemical performance of the electrodes. The electrodes with 0.05 wt.% GQDs deliver a specific discharge capacity of 185, 181 and 179 mAh g−1 at 5, 10, and 20 C, respectively. The performance enhancement is suggested to be due to the synergistic interactions between LTO and GQDs. The strategy as well as as-designed structures of LTO/GQDs show potentials for application as high-rate anode materials in LIBs application.
505404
Handan Qiao, Yawei Yu, Kefan Song, Zeyu Liu and Xiulan Hu
The rational design of cathode materials with core–shell heterostructures is significant to develop a Ni//Zn battery with both high gravimetric and areal energy density under high mass loading. In this work, the NiCo–OH nanothorns with a mass loading of 11.6 mg cm−2 were coated on CuO nanowire arrays via a chemical bath deposition method. Thanks to the construction of 3D core–shell nanowire arrays and appropriate cobalt doping, as-fabricated Ni//Zn battery based on the NiCo–OH as cathode achieved the maximum specific capacity of 383 mAh g−1 at 5 mA cm−2 with high energy density of 649 Wh kg−1 at 0.73 kW kg−1, indicating good energy storage performance in Ni//Zn battery.
505405
Albert Lee, Bingqian Dai, Di Wu, Hao Wu, Robert N Schwartz and Kang L Wang
We present a magnetic implementation of a thermodynamic computing fabric. Magnetic devices within computing cores harness thermodynamics through its voltage-controlled thermal stability; while the evolution of network states is guided by the spin–orbit-torque effect. We theoretically derive the dynamics of the cores and show that the computing fabric can successfully compute ground states of a Boltzmann Machine. Subsequently, we demonstrate the physical realization of these devices based on a CoFeB−MgO magnetic tunnel junction structure. The results of this work pave the path towards the realization of highly efficient, high-performance thermodynamic computing hardware. Finally, this paper will also give a perspective of computing beyond thermodynamic computing.
505406
Chenyuan Zhao, Yuxiang Zhou, Tianyu Shi, Desong Guo, Haihong Yin, Changqing Song, Lin Qin, Zhiliang Wang, Haibao Shao and Ke Yu
The low sulfur utilization, cycling instability, and sluggish kinetics are the critical obstructions to practical applications of lithium–sulfur batteries (LSBs). Constructing sulfur hosts with high conductivity, suppressed shuttle effect, and rapid kinetics is essential for their practical application in LSBs. Here, we synthetically utilized the merits of ZnSe quantum dots (QDs) and layered Ni(OH)2 to boost the performance of LSBs. A novel core–shell ZnSe-CNTs/S@Ni(OH)2 was constructed using the ZnSe-CNTs network as framework to load sulfur and following with Ni(OH)2 encapsulation. The CNT network decorated with ZnSe QDs not only serves as a conductive framework providing fast electron/ion transfer channels, but also limits polysulfide diffusion physically and chemically. Layered Ni(OH)2, the wrinkled encapsulation, not only permits fast electron/ion transfer, but also buffers the expansion, confines active materials, and limits the polysulfide dissolution chemically. When used as a cathode, ZnSe-CNTs/S@Ni(OH)2 presents enhanced electrochemistry performance compared with ZnSe-CNTs/S and CNTs/S. The average specific capacity decreases from 1021.9 mAh g−1 at 0.2 C to 665.0 mAh g−1 at 2 C, showing rate capacity much higher than ZnSe-CNTs/S and CNTs/S. After 150 cycles, the capacity at 0.5 C slowly reduces from 926.7 to 789.0 mAh g−1, showing high retention of 85.1%. Therefore, our investigation provides a new strategy to construct a promising sulfur cathode for LSBs.
505407
Pratik M Pataniya, Meswa Patel, Divesh N Srivastava and C K Sumesh
Efficient hydrogen evolution by electrolysis plays an indispensable role for hydrogen fuel generation in green energy devices. In order to implement high-performance electrocatalytic activity, it is usually necessary to design economically viable, effective and stable electrocatalysts to reduce activation potential barriers. Herein, we report the photosensitive Ni–WS2 nanohybrids for enhanced electrocatalytic hydrogen evolution reaction (HER). Optimisation of chemical composition in catalysts has resulted in the rapid water electrolysis which was further promoted by illumination of 532 nm light. Obvious HER has been achieved at over potential of as low as −210 mV versus RHE without and −190 mV versus RHE (at −10 mA cm−2) with illumination. Being a photosensitive electrocatalysts, Ni–WS2 Nanohybrids have demonstrated stable time-resolved photoresponse with photocurrent of 12.7 mA cm−2 at −250 mV V versus RHE as well as self-powered photodetection with current 0.68 mA cm−2. Finally, HER with improvement under visible light illumination has shown considerable development in clean energy generation by using renewable energy sources.
505408
Wending Zhou, Jieyu Miao, Xuehua Yan, Yanli Li, Yihan Zhu, Wenjing Zhang, Mengyang Zhang, Wen Zhu, Muhammad Sufyan Javed, Jianmei Pan et al
Increasing requirements for wearable devices stimulate the development of flexible energy storage components. Herein, a flexible integrated electrode consisting of SnS2 nanosheet arrays in situ anchored on the functionalized carbon cloth was prepared via a facile one-step hydrothermal method. Through pretreatment of carbon cloth, rough morphology is appeared on the surface of carbon fiber, which is conducive to optimizing the accessible load of SnS2. The SnS2 nanosheet arrays and the carbon fiber as conductive skeleton cooperate with each other to provide a highly open surface, leading to the enhancement in capacitance (194.4 mF cm−2) and the outstanding retention after long-term service (86.5% after 10 000 cycles). A quasi-solid-state asymmetric flexible supercapacitor was assembled to evaluate the practical application under various conditions, suggesting satisfactory electrochemical performance as a maximum energy density of 10.95 μWh cm−2 at the power density of 4.75 mW cm−2 and mechanical stability under actual conditions.
Sensing and actuating
505501
Xiaoju Wu, Yuan Chen, Weiwei Cao and Guowei Yang
Mercury is highly toxic and can accumulate throughout the food cycle, leading to water contamination and foodstuffs pollution. Therefore, increasing attention has been paid to explore effective detection of Hg2+. Here, we report a sensitive Hg2+ sensor based on single-stranded DNA (ssDNA) modified two-dimensional (2D) MOF nanosheets by a ratiometric fluorescent method. The chosen 2D MOF nanosheets possess intrinsic peroxidase-like catalytic ability, ssDNA adsorption and fluorescence quenching. We demonstrate that the adsorption of ssDNA can significantly improve the peroxidase mimetic activity of 2D MOF nanosheets, enhancing the fluorescence of substrate Amplex Red. Taking advantages of the favorable characteristics above, we fabricate an efficient Hg2+ sensor. In the presence of Hg2+, the ssDNA is released from 2D MOF nanosheets, which results in a decreasing of peroxidase mimetic activity of 2D MOF nanosheets and a fluorescence enhancement of attached fluorophore. A linear relationship between ratiometric fluorescence of substrate and fluorophore and Hg2+ concentrations is obtained. The detection limit is 5 nM, which is much lower than the maximal contamination level in drinking water (30 nM) by Word Health Organization. These findings show 2D MOF based ratiometric fluorescent sensor is a convenient and efficient strategy to detect Hg2+.
505502
Chanho Park, Haenglyun Jung, Juneseok You, Hyunjun Park, Yeongeun Yu, Seonwoo Lee, Kuewhan Jang and Sungsoo Na
Recently, the demand for the sensitive detection of nanomaterials and biomolecules has been increasing for evaluating the toxicity of nanomaterials and early diagnosis of diseases. Although many studies have developed new detection assays, these are heavily influenced by the capabilities of the detection equipment. Therefore, the aim of the present study was to improve electrode performance by modifying the surface of the detection electrode using a simple method. Electrode surface modification was performed using carbon nanotubes (CNT) and porous gold nanostructures (NS) with excellent electrical and chemical properties. Through the simple physical deposition of CNT and electrochemical reduction of NS, the increasement of the electrode surface area was achieved. Because of the CNTs attached to the electrodes at the first step, the metal ions constituting the NS can adhere well to the electrodes. Nanoparticles with a porous structure can be generated through electrochemical reduction (cyclic voltammetry) of metal ions attached to electrodes. Consequently, the surface area of the electrode increased and electrochemical performance was improved (confirmed by atomic force microscopy, Nyquist plot and Bode plot). To quantitatively confirm the improvement of electrode performance according to the surface change through the proposed treatment technique, DNA was detected. Unlike previous surface modification studies, the developed surface treatment technique can be applied to a variety of detection equipment. To confirm this, the detection was performed using two detection devices with different operating principles. DNA detection using the two types of equipment confirmed that the detection limit was increased by approximately 1000-fold through applying a simple surface treatment. In addition, this method is applicable to detect various sizes of nanomaterials. The method proposed in this study is simple and has the advantage that it can be applied to various devices and various materials.
505503
Sahar Cheraghi Shahi, Mehdi Dadmehr, Behnaz Korouzhdehi and Abolfazl Tavassoli
Aflatoxin is regarded as the potent carcinogenic agent which is secreted from fungi and present in some food products. So far, many detection methods have been developed to determine the trace amounts of aflatoxin in foods. In the present study a colorimetric competitive assay for detection of aflatoxin B1 (AFB1) has been developed based on interaction of gelatin functionalized gold nanoparticles (AuNPs@gelatin) in specific enzymatic reaction. Bacterial supernatant containing gelatinase enzyme were used as the substrate that could digest the coated gelatin on the surface of AuNPs and following in the presence of NaCl medium ingredient resulted to color change of AuNPs colloidal solution from red to purple. It was observed that with addition of aflatoxin to the bacterial supernatant, aflatoxin could interfere in aggregation of AuNPs and inhibited the process which subsequently prevent the expected color change induced by AuNPs aggregation. The supernatant containing AuNPs were investigated to analyze their induced surface plasmon resonance spectra through UV–visible spectroscopy. The absorption values were directly proportional with the applied AFB1 concentration. The experiment conditions including incubation time, AuNPs concentration and pH were investigated. The obtained results showed that through this approach we could detect the AFB1 in a linear range from 10 to 140 pg ml−1, with detection limit of 4 pg ml−1. Real sample assay in saffron samples showed recoveries percentage of 92.4%–95.3%. The applied approach proposed simple, cost effective and specific method for detection of AFB1 toxin in food samples.
505504
Mengli Liu, Wei Du, Hua Su, Bo Liu, Hao Meng and Xiaoli Tang
This article introduces an innovative technique for achieving a giant magnetoresistance (GMR) switch with an adjustable sensing field range. A spin-valve (SV) patterned into a strip shape is grown on a specific (110)-cut Pb(Mg1/3Nb2/3)0.7Ti0.3O3 (PMN-PT) substrate. In the process of depositing films, a magnetic easy axis of the free layer in the SV is produced along the [001] direction (the x-axis) of the PMN-PT. This PMN-PT can produce a nonvolatile strain by using a positive voltage pulse. Accordingly, the magnetic moment of the free layer can be modulated to the y-axis by the strain-mediated magnetoelectric coupling effect produced in the SV/PMN-PT heterostructure. Furthermore, a negative voltage pulse can release the strain and revert the magnetic moment to the initial [001] direction. The effective field along the [1-10] direction produced by the nonvolatile strain can modulate the easy axis of the free layer, changing it from the x-axis to the y-axis. Therefore, large and small switching fields are achieved in a bipolar GMR switch. Furthermore, by applying positive and negative voltage pulses at appropriate moments, two asymmetrical switching field ranges are obtained. Thus, a GMR switch with four adjustable switching field ranges can be obtained. The proposed modulating model is flexible and can meet the requirements of specific and different application systems. The proposed design reveals a great potential for the application to the internet of things and the development of low-power and high-efficient magnetoresistive sensors.
505505
Teena Gakhar and Arnab Hazra
The current study concerns development of fullerene-C60-encapsulated TiO2 nanoparticles hybrid for an efficient detection of volatile organic compounds (VOCs). The nanocomposite was synthesized via chemical route by using hydrated fullerene-C60 and sol-gel derived undoped p-type TiO2 nanoparticles. The nanocomposite was characterized morphologically and structurally comparing with pure C60 clusters and pure TiO2 nanoparticles as the reference materials. The average diameter of the C60-encapsulated TiO2 nanoparticles was 150 nm whereas the average diameters of C60 clusters and pure TiO2 nanoparticles were 161 nm and 18 nm respectively. Therefore, all the materials were implemented in interdigitated electrode based planner structured sensors and tested towards multiple VOCs. However, C60–TiO2 composite exhibited its natural selectivity towards formaldehyde with a very high sensitivity for the concentration range of 1–1000 ppm. C60-encapsulated TiO2 nanoparticles depicted more than double response magnitude (117%) than the pure TiO2 nanoparticle (48%) and pure C60 particles (40%) and appreciably fast response/recovery (12 s/331 s) towards 100 ppm of formaldehyde at 150 °C. However, the efficient VOC sensing was achieved in C60-encapsulated TiO2 sensors possibly due to the extreme reactive surface provided by the oxygen functionalized C60 and easy electronic exchange between ambient and the TiO2 nanoparticles through C60 layers. The combined properties of both C60 and TiO2 lead to the formation of a promising nanocomposite which provided better sensing characteristics than that of the pure materials.
505506
Suresh Nuthalapati, Vaishakh Kedambaimoole, Vijay Shirhatti, Saurabh Kumar, Hidekuni Takao, M M Nayak and K Rajanna
Flexible strain sensors are emerging rapidly and overcoming the drawbacks of traditional strain sensors. However, many flexible sensors failed to balance the sensitivity, response time, and the desired sensing range. This work proposes a novel and cost-effective strain sensor which simultaneously achieved high sensitivity, fast response, and a good sensing range. It illustrates a prototype strain sensor realized with a nanocomposite constituting reduced graphene oxide and palladium as the primary sensing elements. These sensors were fabricated with manual screen-printing technology. The sensor exhibited an outstanding performance for the different strains ranging from 0.1% to 45%. As a result, a substantially high gauge factor around 1523 at a strain of as high as 45% and a rapid response time of 47 ms was obtained. This work demonstrated potential applications like real-time monitoring of pulse and respiration, and other physical movement detection, which become crucial parameters to be measured continuously during the COVID-19 pandemic.
505507
Shenfei Zong, Xiangyu Ye, Junzhu Zong, Jia Li, Zhuyuan Wang and Yiping Cui
Telomerase plays an important role in maintaining the length of telomere during cell division and is recognized as a new kind of biomarkers for cancer diagnosis. In this work, we present a brand new telomerase detection strategy based on a DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) like strategy. With an extraordinary spatial resolution (∼10 nm), the DNA-PAINT based strategy offers several advantages. First, it avoids complicated polymerase chain reaction and electrophoresis procedures. Second, it enables super resolution imaging of the reaction products with a high signal-to-noise ratio and facilitates the location of telomeric elongation sites on the single particle level, which results in a high sensitivity. Third, the detection scheme of the DNA-PAINT strategy allows direct in situ visualization of the telomeric elongation process, which has never been achieved before. All these advantages make the DNA-PAINT telomerase detection strategy significant for dynamic investigation of telomerase related physiological processes as well as cancer diagnosis.
505508
Ting Han, Sixia Ye, Musen Cheng, Yang Zhang and Lijie Dong
Cadmium ions have been of crucial concern due to the high biological toxicity and serious environmental risks. Various fluorescent Cd-sensitive probes have been reported with improved sensing properties, but still severely suffer from poor stability and insufficient selectivity. In this work, a stable fluorescent probe based on silica encapsulated quantum dots (QDs) have been developed for rapid, sensitive and selective detection of cadmium ion. To improve fluorescence stability, the strategy of mesoporous silica encapsulation was adopted, in which the mesoporous silica shell offers numerous channels for Cd2+. Further, the Forster Resonance Energy Transfer (FRET) system, where QDs@mSiO2 and rhodamine B (RB) are used as donors and acceptors respectively, has been constructed, in which the mesoporous silica shell also serves as spacers with tunable thickness for controlling the QD-RB distance. Under optimal conditions, the probes possess a sensitive fluorescence response with a detection limit of 1.25 μM. Visual detection can be realized by the obvious fluorescence changes of the FRET system. In addition, the FRET system shows promising sensing performances both in tap water samples and rice-washed water samples, confirming a great potential for practical application.
505509
Dandan Lei, Hui Zhang, Nishuang Liu, Qixiang Zhang, Tuoyi Su, Luoxin Wang, Ziqi Ren, Zhi Zhang, Jun Su and Yihua Gao
Although the wearable strain sensors have received extensive research interest in recent years, it remains a huge challenge conforming the requirements in both of ultrahigh stretchability and high strain coefficient (gauge factor). Herein, a stretchable and flexible spandex fiber strain sensor coupled with carbon nanotubes (CNTs)/Ag nanoparticles (Ag NPs) that assembled through an efficient and large-scale layer-by layer self-assembly is presented. To ensure CNTs and Ag NPs can attach well to the spandex fiber without falling off, achieving high sensitivity under large tensile, sodium dodecyl benzene sulfonate, polyvinyl alcohol, and polystyrene sulfonic acid are introduced to improve the adhesion via the molecular entanglement and other interactions between them. Consequently, the strain sensor exhibits remarkable performance, such as an ultrahigh gauge factor of 58.5 in the low-strain range from 0% to 20%, a wide strain range (0%–200%), a fast response time of 42 ms and good working stability (>5000 stretching-releasing cycles). Subsequently, detailed mechanism of the sensor and its use in full range of human motion monitoring are further studied. It is worth noting that with the distinctive mechanism and structure, the special spandex fiber sensor is able to monitor minimum strain as low as 0.053%, showing tremendous prospect for the field of smart fabrics and wearable health care devices.
505510
Guinan Chen, Zelei Wu, Guodong Xu, liangjun Chen, Yongwu Peng and Changhui Ye
To explore a simple and efficient way to fabricate thin film electrodes on flexible substrates is highly desired because of its high promising application in optoelectronics. Transfer printing technique plays a key role in the fabrication of flexible electrodes from conventional substrates to flexible substrates. Unfortunately, a simple, room temperature, environmental-friendly and reusable transfer printing technique still remains challenging. Here we demonstrated a novel water-based wet-transfer printing technique that is simple, room temperature, environmental-friendly and reusable by taking advantage of the adjustment of the intermolecular hydrogen bonding between thin film and substrates. This effective and practical transfer technique may provide an effective route to develop electronic flexible devices with high performance.
505511
Jiyang Zeng, Qian Rong, Bin Xiao, Baoye Zi, Xinya Kuang, Xiyu Deng, Yiwen Ma, Zhenlin Song, Genlin Zhang, Jin Zhang et al
Trace poisonous and harmful gases in the air have been harming and affecting people’s health for a long time. At present, effective and accurate detection of ppb-level harmful gas is still a bottleneck to be overcome. Herein, we report a ppb-level triethylamine (TEA) gas sensor based on p–n heterojunction of Co3O4/WO3, which is prepared with ZIF-67 as the precursor and provides Co3O4 deposited tungsten oxide flower-like structure. Due to the introduction of Co3O4 and the 3D flower-like structure of WO3, the Co3O4/WO3-2 gas sensor shows excellent gas sensing performance (1101 for 10 ppm at 240 °C), superb selectivity, good long-term stability and linear response for TEA concentration. Moreover, the experimental results indicate that the Co3O4/WO3-2 gas sensor also possesses a good response to 50 ppb TEA, in fact, the theoretical limit of detection is 0.6 ppb. Co3O4 not only improves the efficiency of electron separation/transport, but also accelerates the oxidation rate of TEA. This method of synthesizing p–n heterojunction with ZIF as the precursor provides a new idea and method for the preparation of low detection limit gas sensors.
Materials: synthesis or self-assembly
505601
Cai Zhang, Wenjin Yang, Jing Li, Xin Jin, Liu Yang and Baodan Liu
In this work, we demonstrate the growth of highly ordered β-Ga2O3 nanoarrays with (001) preferred growth plane for the first time through a facile heteroepitaxial strategy using metal Ga and c-sapphire as Ga precursor and monocrystalline substrate. The (001) preferred growth plane means that the β-Ga2O3 nanowires grow along the normal direction of the (001) plane. The β-Ga2O3 nanoarrays along (001) preferential plane exhibit inclined six equivalent directions that correspond to the six crystallographic symmetry of (0001) α-Al2O3. High-resolution transmission electron microscopy analyses confirm the good crystallinity and the existence of unusual epitaxial relationship of {310}β-Ga2O3 ǁ (0001)α-Al2O3 and <001>β-Ga2O3 or <132>β-Ga2O3 ǁ [1
00]α-Al2O3. UV–vis and cathodoluminescence measurements reveal the wide band gap of 4.8 eV and the strong UV-blue luminescence (300–500 nm) centered at ∼388 nm. Finally, the luminescence mechanism is further investigated with the assistance of x-ray photoelectron spectroscopy. The heteroepitaxial strategy of highly ordered β-Ga2O3 nanoarrays in this work will undoubtedly pave a solid way toward the fundamental research and the applications of Ga2O3 nanodevices in optoelectronic, gas sensor, photocatalyst and next-generation power electronics.
505602
Jianyun Zhao, Yuxiao Yang, Chuan Jiang, Nawab Ali Khan, Xin Jia, Hongyang Zhao and Shujiang Ding
Yolk-shell structure can effectively alleviate the volume change of electrodes during electrochemical charge/discharge. In this paper, we provide a new ship in bottle strategy to synthesize MnS@C sodium ion battery anode with yolk-shell nanostructure. The obtained yolk-shell structures were uniform spheres. The space between the carbon shell and MnS core allows the volume change of MnS without deforming the carbon shell or damaging the solid electrolyte interface film formed on the outer surface. The MnS@C yolk-shell structure showed stable cycle stability (336 mAh g−1 capacity after 200 cycles at 0.5 A g−1 current density)
505603
Jun Shen, Jiangbing Yan, Li Zhan, Chuanqiang Wu, Binghui Ge, Xu Wang, Hongbing Wang, Qilong Cui, Dong Yang, Hongling Zhang et al
Tungsten Disulfide (WS2) films, as one of the most attractive members in the family of transition metal dichalcogenides, were synthesized typically on SiO2/Si substrate by confine-spaced chemical vapor deposition method. The whole process could be controlled efficiently by precursor concentration and fast thermal process. To be priority, the effect of fast heating-up to cooling-down process and source ratio-dependent rule for WS2 structure have been systematically studied, leading to high-yield and fine structure of monolayer WS2 films with standard triangular morphology and average edge length of 92.4 μm. The growth time of the samples was regulated within 3 min, and the optimal source ratio of sulfur to tungsten oxide is about 200:3. The whole experimental duration was about 50 min, which is only about quarter in comparison to relevant reports. We assume one type of ‘multi-nucleation dynamic process’ to provide a potential way for fast synthesis of the samples. Finally, the good performance of as-fabricated field-effect transistor on WS2 film was achieved, which exhibits high electron mobility of 4.62 cm2 V−1 s−1, fast response rate of 42 ms, and remarkable photoresponsivity of 3.7 × 10–3 A W−1. Our work will provide a promising robust way for rapid synthesis of high-quality monolayer TMDs films and pave the way for the potential applications of TMDCs.
505604
Shimin Li, Lei Bai, Haibiao Shi, Tianjiao Wang, Xianfeng Hao, Zhipeng Ma, Ling Chen, Xiujuan Qin and Guangjie Shao
In order to reduce the overpotential of hydrogen evolution reaction (HER), the ternary coating Co–W–P was deposited on the surface of the nickel foam by electrochemical deposition to obtain a highly active electrode. Based on the measured double layer capacitance (Cdl) and HER activity, there is volcanic behavior between the intrinsic activity of Co–W–P and the Co:W ratio in the electrolyte. W and P play different roles in the formation of nanoparticles, and work together to achieve the large electrochemical surface area and excellent activity. When applied to the modification of other catalysts (Ni–P and Fe–P), the higher intrinsic activity was obtained after the introduction of W.
505605
Md Afjal Khan Pathan, Aakash Gupta and Mihai E Vaida
In this work, the growth and stability towards O2 exposure of two dimensional (2D) TaS2 on a Cu(111) substrate is investigated. Large area (∼1 cm2) crystalline 2D-TaS2 films with a metallic character are prepared on a single crystal Cu(111) substrate via a multistep approach based on physical vapor deposition. Analytical techniques such as Auger electron spectroscopy, low energy electron diffraction, and photoemission spectroscopy are used to characterize the composition, crystallinity, and electronic structure of the surface. At coverages below one monolayer equivalent (ML), misoriented TaS2 domains are formed, which are rotated up to
relative to the Cu(111) crystallographic directions. The TaS2 domains misorientation decreases as the film thickness approaches 1 ML, at which the crystallographic directions of TaS2 and Cu(111) are aligned. The TaS2 film is found to grow epitaxially on Cu(111). As revealed by low energy electron diffraction in conjunction with an atomic model simulation, the (3 × 3) unit cells of TaS2 match the (4 × 4) supercell of Cu(111). Furthermore, the exposure of TaS2 to O2, does not lead to the formation of a robust tantalum oxide film, only minor amounts of stable oxides being detected on the surface. Instead, the exposure of TaS2 films to O2 leads predominantly to a reduction of the film thickness, evidenced by a decrease in the content of both Ta and S atoms of the film. This is attributed to the formation of oxide species that are unstable and mainly desorb from the surface below room temperature. Temperature programmed desorption spectroscopy confirms the formation of SO2, which desorbs from the surface between 100 and 500 K. These results provide new insights into the oxidative degradation of 2D-TaS2 on Cu(111).
505606
Guoan Tai, Bo Liu, Chuang Hou, Zitong Wu and Xinchao Liang
Borophene has attracted enormous attention because of its rich and unique structural and electronic properties for promising pratical applications. Although borophene sheets have been realized on different substrates in recent experiments, there are very few reports on the device application of borophene. Recently, borophene can be grown on some functional substrates, which lays a good foundation for its potential applications. Here, we report that hydrogenated borophene can be grown on the fluorine-doped tin oxide glass substrate. The phase of the obtained borophene is well consistent with the predicted semiconducting δ5-boron sheet. Furthermore, a vertical heterojunction ultraviolet detector based p-borophene/n-zinc oxide was fabricated. The photoresponsivity of the detector is 1.02 × 10−1 A W−1, the specific detection rate was 1.43 × 109 Jones and the response speed was τres = 2.8 s, τrec = 3.2 s at the reversed bias of −5 V under the light excitation of 365 nm. This work will lay a foundation for further study on the attractive properties and applications of borophene in new optoelectronic devices and integrated circuits.
505607
Qian Du, Quan Zhang and Guohua Liu
Plasmons of noble metal nanoparticles have played an important role in energy transfer research, biomedical sensing, drug preparation and photocatalysis in recent years. The scattering spectra of nanoparticles are dramatically affected by numerous complex parameters, such as morphology, material, and volumes, making the parameters design a necessary step before the experiment. However, the plasmonic design is limited by several difficulties, such as the high degree of freedom, expensive trial and error costs. Herein, a plasmonic design method based on dual strategy deep learning is proposed, which can provide the design proposals according to the required spectrum. To make the model closer to the real experimental situation, the boundary element method was used to build a scattering spectra dataset of geometric nanoparticles (>1200 000 samples). Driven by the above data, the artificial intelligence (AI) model learns the relationship between spectral features and design parameters. Then, the performance statistics of the model were implemented from multiple dimensions, and a high design precision of over 90% was achieved in testing cases (testing samples >120 000). Moreover, to verify the realizability of the proposed model, the scattering spectra of nanoparticles designed by AI were constructed using a dark-field microscope system. The experimental results showed that the deviation between the target and the actual spectra was very small and within the acceptable range. This proves the realizability of the AI model proposed in this paper, and sheds light on the application of AI in plasmonic design.
505608
Ondřej Jašek, Jozef Toman, Miroslav Šnírer, Jana Jurmanová, Vít Kudrle, Jan Michalička, Dalibor Všianský and David Pavliňák
Understanding underlying processes behind the simple and easily scalable graphene synthesis methods enables their large-scale deployment in the emerging energy storage and printable device applications. Microwave plasma decomposition of organic precursors forms a high-temperature environment, above 3000 K, where the process of catalyst-free dehydrogenation and consequent formation of C2 molecules leads to nucleation and growth of high-quality few-layer graphene (FLG). In this work, we show experimental evidence that a high-temperature environment with a gas mixture of H2 and acetylene, C2H2, leads to a transition from amorphous to highly crystalline material proving the suggested dehydrogenation mechanism. The overall conversion efficiency of carbon to FLG reached up to 47%, three times as much as for methane or ethanol, and increased with increasing microwave power (i.e. with the size of the high-temperature zone) and hydrocarbon flow rate. The yield decreased with decreasing C:H ratio while the best quality FLG (low D/G–0.5 and high 2D/G–1.5 Raman band ratio) was achieved for C:H ratio of 1:3. The structures contained less than 1 at% of oxygen. No additional hydrogen was necessary for the synthesis of FLG from higher alcohols having the same stoichiometry, 1-propanol and isopropanol, but the yield was lower, 15%, and dependent on the atom arrangement of the precursor. The prepared FLG nanopowder was analyzed by scanning electron microscopy, Raman, x-ray photoelectron spectroscopy, and thermogravimetry. Microwave plasma was monitored by optical emission spectroscopy.
505609
Daniel Pfützenreuter, Martina Zupancic, Zbigniew Galazka, Robert Schewski, Andrea Dittmar, Klaus Irmscher, Martin Albrecht and Jutta Schwarzkopf
The use of LaInO3 with (110) surface orientation was investigated as a novel orthorhombic substrate for the epitaxial growth of semiconducting BaSnO3 thin films. On the basis of reflection high-energy electron diffraction, energy dispersive x-ray analysis and inductively coupled plasma-optical emission spectrometry measurements, we revealed that slight Ba doping of LaInO3 crystals is beneficial to stabilize the substrate surface, which facilitates the epitaxial growth of well-ordered BaSnO3 thin films by pulsed laser deposition. Fully strained BaSnO3 films without misfit dislocations found by means of transmission electron microscopy were achieved due to the negligible lattice mismatch between BaSnO3 film and Ba-doped LaInO3 substrate. Electric properties of La-doped BaSnO3 films exhibit a Hall-mobility of 69 cm2 V−1 s−1 at room temperature and 99 cm2 V−1 s−1 at 20 K at a constant charge carrier density of 3.8·1019 cm−3.
505610
Liyun Qin, Yan Lu, Qinliang Li, Zhendong Wang, Jianyu Wang, Binbing Tang, Wenda Zhou, Cailei Yuan, Qisheng Wang and Li Wang
The combination of two-dimensional (2D) materials with non-2D materials (quantum dots, nanowires and bulk materials), i.e. mixed-dimensional van der Waals (md-vdW) heterostructures endow 2D materials with remarkable electronics properties. However, it remains a big challenge to synthesize md-vdW heterostructures because of the difference of crystal symmetry between 2D and non-2D materials. Meanwhile, it is difficult to initiate the nucleation due to the lack of chemical active sites on chemical inert surfaces of 2D materials. Herein, we design a general chemical vapor deposition method for synthesizing a broad class of md-vdW heterostructures with well-aligned hexagonal symmetry including MoS2/FeS, MoS2/CoS, MoS2/MnS, MoS2/ZnS, Mo(SxSe1–x)2/ZnSxSe1–x, Mo(SxSe1–x)2/CdSxSe1–x. Combining with DFT calculation, we find that the hexagonal symmetry and the centered clusters of MoS2 and Mo(SxSe1–x)2 nanoflakes are two crucial factors to launch the hexagonally oriented growth and nucleation of non-2D materials on 2D materials. Our discovery opens an opportunity for the versatile hetero-integration of 2D materials and allows systematic investigation of physical properties in a wide variety of md-vdW heterostructures.
505611
Huilian Hao, Yue Zhao, Tianliang Song, Xu Wang, Changwang Li, Wenyao Li and Wenzhong Shen
Herein, we report an enhanced red emission from colloidal silicon nanocrystals (c-Si NCs) solution-processed light-emitting diode. c-Si NCs were synthesized by facile femtosecond laser ablation. Based on the structural characterization and opto-electrics properties analysis, both photoluminescence and electroluminescence arise from the radiative recombination of carriers due to quantum confined effect. The optical power density and highest external quantum efficiency have been obtained to be 0.79 mW cm−2 and ∼6.6%, respectively. These results indicate that Si NCs are very attractive as a potential optical source for future integrated chips.
Materials: properties, characterization or tools
505701
Steven De Alwis, Mehran Abbasi Shirsavar, Sarabjit Singh and Nicole N Hashemi
A scalable manufacturing method for the production of biocompatible fewlayered graphene nanosheets is developed using hydrodynamic cavitation. Scalable exfoliation is induced by employing hydrodynamic cavitation and a serum albumin protein. Unlike acoustic cavitation, the primary means of bubble collapse in hydrodynamic cavitation is caused laterally, thereby separating two adjacent flakes through a shear effect. In this process, bovine serum albumin, a known protein, was employed to act as an effective exfoliation agent and provide desired stability by preventing restacking of the graphene layers. This method was used to study the effect of time of graphene exfoliation in a novel hydrodynamic cavitation system. The fabricated products were characterized using Raman spectroscopy, Transmission electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry. The results showed that with increasing the time of exfoliation, the number of graphene layers decreased based on the I2D/IG ratio but disorder increased based on the ID/IG ratio. At 3 h, the I2D/IG ratio was at 0.39 and the ID/IG ratio was 0.25, while at 6 h the I2D/IG ratio was 0.35 and ID/IG ratio was 0.29. The results of the theoretical and computational analysis this research outlines are needed to obtain an effective cavitation model that can be used to potentially improve graphene synthesis and quality. The captured images of bubble propagation in the solution imply that this fluidic phenomenon could assist the graphene exfoliation. To prove this, a simple cavitation model using a needle valve was designed. The needle valve cavitation setup was able to identify that cavitation assists in graphene exfoliation and this was proved using the graphene characterization data. Based on these findings, the simulation models were designed in ANSYS and COMSOL. Specifically, through the ANSYS simulation, we were able to calculate cavitation numbers for specific flow rates and fluid temperatures.
505702
Young Gyu You, Dong Ho Shin, Jong Hwa Ryu, E E B Campbell, Hyun-Jong Chung and Sung Ho Jhang
We have investigated the effect of an Al2O3 passivation layer on the performance of few-layer WS2 FETs. While the performance of WS2 FETs is often limited by a substantial decrease in carrier mobility owing to charged impurities and a Schottky barrier between the WS2 and metal electrodes, the introduction of an Al2O3 overlayer by atomic layer deposition (ALD) suppressed the influence of charged impurities by high-κ dielectric screening effect and reduced the effective Schottky barrier height. We argue that n-doping of WS2, induced by positive fixed charges formed at Al2O3/WS2 interface during the ALD process, is responsible for the reduction of the effective Schottky barrier height in the devices. In addition, the Al2O3 passivation layer protected the device from oxidation, and maintained stable electrical performance of the WS2 FETs over 57 d. Thus, the ALD of Al2O3 overlayer provides a facile method to enhance the performance of WS2 FETs and to ensure ambient stability.
505703
Ruxin Deng, Lingling Lin, Liya Li and Jian Wu
Transition metal phosphides are regarded as promising hydrogen evolution reaction (HER) electrocatalysts for water splitting. An efficient mass-transfer mechanism can be promoted through constructing microporous structures. In addition, introducing carbon materials as carriers to form interface interactions is beneficial for increasing electronic conductivity so as to promote the catalytic activity further. In this work, a nitrogen-doped graphene (NGO)-supported microporous nickel phosphide-nickel phosphite (Ni2P-Ni11(HPO3)8(OH)6@NGO, Ni2P-MPH@NGO), where Ni2P nanoparticles uniformly fill the micropores of Ni11(HPO3)8(OH)6 and then are supported on two-dimensional NGO via a simple two-step method, has been studied as a novel efficient electrocatalyst for HER. Compared with carbon nanotubes and graphene as carbon-based carriers, the optimized Ni2P-MPH@NGO catalyst shows excellent HER performance with a smaller overpotential, lower Tafel slope and long-term catalytic durability under acid conditions. The results demonstrate that NGO can enhance the catalytic activity of Ni2P-MPH@NGO efficiently. The results show that the synergistic effect of the microporous structure of Ni11(HPO3)8(OH)6 and NGO effectively improves the catalytic activity of the Ni2P-MPH@NGO composite catalyst, which provides a promising strategy for the design of a new low-cost and high-efficiency HER electrocatalysts.
505704
Surjendu Maity, Tamanna Bhuyan, Jagannath Prasad Pattanayak, Siddhartha Sankar Ghosh and Dipankar Bandyopadhyay
Development of nanocomposites as drug delivery vectors is a burgeoning field of research. However, the usage of such newly invented nanomatrices are often limited by the shortcomings associated with the testing of their real-life efficacy. Many drugs fail because a monolayer framework of in vitro cell line screening method does not adequately mimic the in vivo three-dimensional microenvironments. In this direction, the study unveils the development of a continuous flow microreactor wherein the cellulose acetate nanoparticles (CANPs) with varying sizes are prepared before encapsulating them with an anticancer drug—doxorubicin (DOX). Subsequently, an in vitro microfluidic drug delivery model has been introduced in which the HeLa cells specific to cervical cancer is treated with the DOX encapsulated CANPs—DOX@CANPs. Thereafter, the transport of the drugs from the fluidic to cellular environment, their transport inside the cell, and the real-time kinetics of the cancer cell apoptosis have been analyzed systematically to uncover the real-time efficacy and cytotoxic effects of the nanocomposite. Interestingly, experiments reveal, (i) ∼89.4% DOX loading on the nanocomposite owing to a facile electrostatic interaction, (ii) a pH-dependent controlled release of drug during the transport with the cancer cells, and (iii) cell apoptosis after the diffused inoculation of the drug. A mathematical model has been developed to emulate the drug transport from the surrounding fluid to the cancer cells. Experiments together with the mathematical model uncover that the kinetics of cancer cell death is limited by the reaction at the cell-nucleus. The microfluidic model has shown significant potential to be translated as a useful tool for the real-time and on-demand in vitro screening of the cancer drugs.
505705
Zhiwei Xing, Xue Zhang, Wenxian Yang, Huan Li, Yukun Zhao, Tieshi Wei, Lifeng Bian, Guifeng Chen, Hua Qin and Shulong Lu
Photocatalytic conversion of CO2 to produce fuel is considered a promising approach to reduce CO2 emissions and tackle energy crisis. GaN-based materials have been studied for CO2 reduction because of their excellent optical properties and band structure. However, low photocatalytic activity and severe photocorrosion of GaN-based photoelectrode greatly limit their applications. In this work, photocatalytic activity was improved by adopting InGaN quantum dots (QDs) combined with C3N4 nano-sheets as photoanode, and thus the efficiency of CO2 reduction and the selectivity of hydrogen production were increased significantly. In addition, the photoelectron-chemical corrosion of photoelectrodes has been apparently controlled. InGaN QDs/C3N4 has the highest CO and H2 productions rates of 14.69 μmol mol−1 h−1 and 140 μmol mol−1 h−1 which were 2.2 times and 14.5 times than that of InGaN film photoelectrode, respectively. The enhancement of photocatalytic activity is attributed to C3N4 modification and a large electric dipole forming on the surface of InGaN QDs, which facilitate the separation and transfer of photo-generated carriers and thus promote CO2 reduction reaction. This work provides a promising strategy for the development of GaN-based photoanodes with superior stability and efficiency.
505706
The following article is Open access
Marin Petrović, Frank J Meyer zu Heringdorf, Michael Horn-von Hoegen, Patricia A Thiel and Michael C Tringides
An unusually broad bell-shaped component (BSC) has been previously observed in surface electron diffraction on different types of 2D systems. It was suggested to be an indicator of uniformity of epitaxial graphene (Gr) and hexagonal boron nitride (hBN). In the current study we use low-energy electron microscopy and micro-diffraction to directly relate the BSC to the crystal quality of the diffracting 2D material. Specially designed lateral heterostructures were used to map the spatial evolution of the diffraction profile across different 2D materials, namely pure hBN, BCN alloy and pure Gr, where the alloy region exhibits deteriorated structural coherency. The presented results show that the BSC intensity has a minimum in the alloyed region, consequently showing that BSC is sensitive to the lateral domain size and homogeneity of the material under examination. This is further confirmed by the presence of a larger number of sharp moiré spots when the BSC is most pronounced in the pure hBN and Gr regions. Consequently, it is proposed that the BSC can be used as a diagnostic tool for determining the quality of the 2D materials.
505707
B L Aarseth, C S Granerød, A Galeckas, A Azarov, P D Nguyen, Ø Prytz and L Vines
Semiconductor nanocrystals are often proposed as a viable route to improve solar energy conversion in photovoltaics and photoelectrochemical systems. Embedding the nanocrystals in, e.g. a transparent and conducting electrode of a solar cell will promote the photon absorption and subsequent transfer of the generated charge carriers from the nanocrystal, and thereby enhance the function of the electrode. This can be accomplished by embedding a semiconducting nanocrystal with a small bandgap in a transparent conducting oxide (TCO), which is commonly utilized as electrode in new generation solar cells. Here, we demonstrate the incorporation, formation, and functionalization of germanium (Ge) nanocrystals in zinc oxide utilizing ion implantation, where post implantation annealing at 800 °C results in diamond cubic Ge nanocrystals with sizes between 2 and 20 nm. Photoluminecence spectra show a distinct emission around 0.7 eV arising from the Ge nanocrystals, and with additional emission features up to 1.15 eV due to quantum confinement, demonstrating a novel functionalization and tunability of the TCO electrode.
505708
Jianjie Dong, Huimin Feng, Xiaofeng Wang, Shengyao Chen, Shu Wang, Chen Zhang and Qian Liu
Achieving a large enhancement of local electromagnetic fields in the ultraviolet waveband is desirable for some applications such as surface-enhanced Raman scattering and surface-enhanced fluorescence. In addition, it is more significant for some applications such as plasmon-enhanced harmonic generation to enhance the intensity of local electromagnetic fields and increase their decay time at the same time. In this paper, using the finite-difference time-domain method, we numerically demonstrate that using the linearly polarized light with a wavelength of 325 nm as the illumination light, an isolated triangular Al–SiO2–Al hybrid nanoplate with optimized geometric parameters can produce a local electric field enhanced by a factor of about 108 at one of its top apexes, and produce two local electric fields enhanced by a factor of about 150 at two transverse dielectric/metal interfaces of one of its longitudinal side edges. Moreover, we also numerically demonstrate that the decay time of enhanced local electric fields produced by the isolated triangular Al–SiO2–Al hybrid nanoplate is about 1.6 times as large as that of enhanced local electric fields produced by an isolated triangular Al nanoplate. These unique properties of the isolated triangular Al–SiO2–Al hybrid nanoplate arise because of both the transverse coupling and the longitudinal coupling of localized surface plasmon polaritons in this structure. Our findings make triangular Al–SiO2–Al hybrid nanoplates very promising for application in many fields such as surface-enhanced Raman scattering and plasmon-enhanced harmonic generation.
505709
Nasim Seyedpour Esmaeilzad, Özge Demirtaş, Ahmet Kemal Demir and Alpan Bek
Thin metallic films on dielectric nanospheres are demonstrated to have a high potential for the fabrication of cost-effective SERS substrates. In addition to the morphological advantages that nanospheres offer for attaining a high density of hot spots, possessing shape adjustability by uncomplicated thermal treatment makes them an attractive platform for tuneable SERS substrates. Furthermore, when combined with the oblique angle metal deposition technique, adjustable gaps at a high density and adjustable shape of metal films, such as Ag films, can be achieved on nanospheres. Applying small changes in deposition angle can provide means for fine adjustment of the Raman enhancement factor (EF), resulting in EF up to 108 measured using crystal violet dye molecule as a Raman analyte. This practice paves the way for the fabrication of high EF SERS substrates at a reasonable cost using a monolayer of self-organized nanosphere patterns. An ultra-thin Ag film coated at 5° tilt is shown to be an excellent substitute for a film deposited at 0° with double the thickness. There is a strong agreement between the experimental results and finite-elements-method-based Maxwell simulations exhibiting expected field enhancements up to 109 at a tilt angle of 5°.
505710
Jiahui Li, Lili Wang, Yuying Yang, Bing Wang, Cunpeng Duan, Linlin Zheng, Rulin Li, Yujia Wei, Junqing Xu and Zhen Yin
Exploring high-efficiency and low-cost bifunctional electrodes for supercapacitors and sensors is significant but challenging. Most of the existing electrodes are mostly single-functional materials with simple structure. Herein, NiCo2O4 nanowires as the core and NiMn layered double hydroxide (LDH) as the shell is directly grown in situ on carbon cloth (CC) to form a heterostructure (NiMn LDH@NiCo2O4/CC). The performance in supercapacitors and enzyme-free glucose sensing has been systematically studied. Compared with a single NiCo2O4 nanowire or NiMn LDH nanosheet, the heterogeneous interface produced by the unique core–shell structure has stronger electronic interaction and abundant active surface area, which shows excellent electrochemical performance. Electrochemical tests demonstrate that the NiMn LDH@NiCo2O4/CC core–shell electrode possesses an area specific capacitance of 2.40 F cm−2 and a rate capability of 76.22% at 20 mA cm−2. Simultaneously, asymmetric supercapacitor is assembled with it as the positive electrode and NiFe LDH@NiCo2O4/CC as the negative electrode. The supercapacitor possesses an energy density of 47.74 Wh kg−1 when the power density is 175 W kg−1, revealing excellent performance and maintains cycle stability of 93.48% after 6000 cycles at 10 mA cm−2. Additionally, the electrode applied as enzyme-free glucose sensor electrode also displays outstanding sensitivity of 2139 μA mM−1 cm−2, wide detection range (2 μM−3 mM and 4–8 mM) and low detection limit of 210 nM, representing good anti-interference performance. This work reveals the multi-metal synergy and rationally designed core–shell structure is critical to the electrochemical performance of bifunctional electrodes.
505711
Shaojie Wang, Zhen Luo, Jiajie Liang, Simin Peng, Jun Hu, Jingliang He and Qi Li
Nanoscale mapping of electric polarizability in a heterogeneous dielectric material with surface irregularities is of scientific and technical significance, but remains challenging. Here, we present an approach based on intermodulation electrostatic force microscopy (EFM) in conjunction with finite element computation for precise and high-resolution mapping of polarizability in dielectric materials. Instead of using electrostatic force in conventional quantitative EFM approaches, the force gradient is acquired to achieve an unprecedented spatial resolution. In the meantime, the finite element model is applied to eliminate the interference from the heterogeneity and surface irregularity of the sample. This approach directly reveals the high polarization ability of the amorphous region in a ferroelectric, semi-crystalline polymer with significant surface roughness, i.e. poly (vinylidene fluoride-co-chlorotrifluoroethylene), in which the result is consistent with the predicted data in the latest research. This work presenting a quantitative approach to nanoscale mapping of electric polarizability with unprecedented spatial resolution may help to reveal the complex property-structure correlation in heterogeneous dielectric materials.
505712
Wei Zhang, Changlin Li, Zunyi Tian and Zhongyu Hou
Porous ZnO nanosheets with different thickness were prepared on zinc substrate by air cold plasma for photocatalytic degradation and photoelectrochemical water splitting. The ZnO nanosheets consisted of nanocrystallines with high-density oxygen-related defects characterized by the strong red luminescence. The UV absorption tended to be saturated as the thickness increased, and the saturation occurred at a thickness of about 2.3 μm. Under UV irradiation (365 nm), the 2.3 μm thick sample with higher content of oxygen vacancies and oxygen interstitials showed the highest photocatalytic activity (and higher than P25 TiO2) in degradation of gaseous ethyl acetate. Due to the excellent UV–vis absorption ability and the effective transfer of photogenerated carriers, the ZnO nanosheets with thickness of 3.3 μm showed a photocurrent density as high as 0.22 mA cm−2 at −0.28 V (versus Ag/AgCl) under AM 1.5 G 100 mW cm−2.
505713
Wei-Lin Lin, Hou-Yang Zhong, Yue-E Huang, Xian Lu, Yi Zhao, Jia-Xiang Zhang, Ke-Zhao Du and Xiao-Hui Wu
The exploration of advanced anode materials through rational structure/phase design is the key to developing high-performance rechargeable batteries. Herein, tetraphosphorus tetraselenide (Se4P4) nanoparticles confined within porous carbon (named SeP@C) are developed for lithium-ion batteries. The designed SeP@C shows a set of structural/compositional advantages as lithium-ion battery anodes including high electrical conductivity, low ion diffusion barrier, and relieved lithiation stress. Consequently, the SeP@C electrode displays superior comprehensive lithium storage performance, e.g., high reversible capacity (640.8 mA h g−1 at 0.1 A g−1), excellent cycling stability (500 cycles with respective capacity retention of over or nearly 100%), and good rate capability, representing a comparable lithium storage performance in reported phosphide-based anodes. More significantly, it shows excellent energy storage properties in lithium-ion full cells which can light up 85 red LEDs for over 3.2 h. This work offers an advanced electrode construction guidance of phosphorous-based anodes for the development of high-performance energy storage devices.
505714
Hafsa Saeed, Nimra Nadeem, Muhammad Zahid, Muhammad Yaseen, Saima Noreen, Asim Jilani and Imran Shahid
Visible active mixed metal ferrite intercalated semiconductor photocatalyst Mn0.6Zn0.4Fe2O4/g-C3N4 was prepared via facile hydrothermal and liquid assembly method for methylene blue (MB) dye degradation. The prepared samples were well characterized in term of their functional groups, crystallinity, elemental analysis, surface morphology using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, energy dispersive x-ray, and scanning electron microscopy, respectively. The optical response of catalysts was checked by estimating the energy band gap (Eg) of semiconductor photocatalysts using UV–vis spectroscopy. The photoluminescence spectroscopy was also performed to estimate the reduction in emission intensity after insertion of g-C3N4 into Mn0.6Zn0.4Fe2O4. The novel composition of Mn0.6Zn0.4Fe2O4 with g-C3N4, improved the optical response of pristine photocatalysts due to the reduction in the energy band gap and insertion of heterojunction. The surface area analysis of Mn0.6Zn0.4Fe2O4 and Mn0.6Zn0.4Fe2O4/g-C3N4 were acquired by Brunauer–Emmett–Teller. Point zero charge was also determined to observe the surface behavior of composite under different solution pH. Various parameters such as pH, catalyst dose, oxidant dose, irradiation time and initial dye concentration were optimized, and their effects were studied in photo-Fenton process. It was observed that 98% MB dye was degraded under optimized conditions (pH = 8, composite dose = 50 mg/100 ml, oxidant dose = 7 mM, initial dye conc. = 10 ppm, and irradiation time = 120 min). The results showed that when the ferrites of mixed metals (Mn, Zn) were used with g-C3N4 their photocatalytic activity enhanced due to mutual effect of both mixed metals ferrite and g-C3N4, which is considerably higher than their individual effect already reported. Furthermore, the combined effect of independent variables was evaluated by response surface methodology.
505715
Yiru Niu, Kang’an Jiang, Xinyuan Dong, Diyuan Zheng, Binbin Liu and Hui Wang
Due to magnetic field tunability and the abundance of iron in the Earth’s crust, iron oxide-based resistive random access memory (RRAM) is considered to be low cost and potential for multi-level storage. However, the relatively high operation voltage (>1 V) and small storage window (<100) limit its application. In this work, the devices with simple Ag/Fe2O3/Pt structure exhibit typical bipolar resistive switching with ultralow set voltage (Vset) of 0.16 V, ultralow reset voltage (Vreset) of −0.04 V, high OFF/ON resistance ratio of 103, excellent cycling endurance more than 104 and good retention time longer than 104 s. Each major parameter has about an order of magnitude improvement compared to the previous data. The devices demonstrate outstanding stable low power consumption quality. Based on the analysis of the experimental results, a percolation model of silver ion migration was established and confirmed that low operation voltage is attributed to the amorphous oxide layer with large porosity. During electrical testing, the compliance current (Ic) and maximum reset voltage (Vmax) can also affect the device performance. This discovery suggests Fe2O3 memristor has significant potential for application and provides a new idea for the realization of high-performance low-power RRAM.
505716
Lei Zhang, Jiehai Peng, Yuan Yuan and Kun Peng
Low-cost and high-efficiency transition metal oxide catalysts are desired for high-efficiency water splitting technology. An applying magnetic field (MF) enhancement method is presented to improve the oxygen evolution reaction (OER) performance of NiCo-spinel magnetic catalysts, the enhancement of OER performance depends on the applied MF strength and magnetic properties of catalysts. The maximum enhanced current density percentage of about 90.6%, 93.7%, and 70.1% are obtained by applying 105 mT MF in NiCo2O4, Ni1.5Co1.5O4, and Ni2CoO4, respectively. The enhanced performance originates from the improved intrinsic activity and facilitated mass transfer process. The MF decreases the activation energy, which then leads to the improvement of intrinsic activity. This work provides more basic data for further gaining into the enhanced mechanism by applying the MF, meanwhile, the strategy can be used to enhance the performances of other electrocatalysts.
505717
Lilei Zhang, Botan Li, Chunyan Liu, He Tian, Manzhou Hong, Xia Yin and Xun Feng
A highly dispersed Mn/TiO2 catalyst, which has high efficiency for NO conversion with CO and almost completed N2 selectivity at a low-temperature range (350–550 K), was investigated using experimental and DFT theoretical calculation. The characterization results illustrated that the catalyst assembled with nanoparticles and the Mn doping into the TiO2 surface lattice led to the formation of Mn–O–Ti configuration, which enhanced the dispersion of Mn on the body of TiO2. The DFT study mapped out the complete catalytic cycle, including reactants adsorption, oxygen vacancy generation, N2O intermediates formation, N2 formation in Eley−Rideal (ER), Langmuir−Hinshelwood, and termolecular Eley−Rideal mechanisms. With thermodynamic and kinetic analysis combined with experimental results, the ER reaction process was considered to be the fundamental mechanism over the highly dispersed Mn/TiO2 catalyst. The calculation results indicated that N2O was a significant intermediate. However, the rapid N2O reduction process led to high N2 selectivity. The rate-limiting step was the deoxygenation step of NO−MnOv/TiO2 from N−O bond scission. The active site Mn−Ov pair embedded in Mn/TiO2 was responsible not only for the formation of N−Mn/TiO2 in the ER-1 step but also for the N2O deoxygenation process to make the final product N2 in the ER-2 step. The synergetic effect between Mn 3d electron and the oxygen vacancy of TiO2 were responsible for the catalytic activity of Mn/TiO2.
505718
Purbajyoti Bhagowati, Ujjal Saikia and Munima B Sahariah
Some small nanoclusters of plasmonically superior titanium nitride are generated using ab initio molecular dynamics simulation under the regime of density functional theory. The global minima structures of TiN lack symmetry in the local environment as compared to the bulk counterpart. Electronic properties, namely Bader charge, electron localization function, and density of states, help us to have a deeper understanding of these nanoclusters. In all the calculations, bulk TiN has been taken as a reference to compare the properties. It has been observed that with an increasing number of atoms in the nanoclusters, they tend to show properties similar to bulk TiN, indicating that they might as well be used as plasmonic materials.
505719
Qi Wang, Yu Zheng, Changjian Zhou, Mansun Chan and Cary Y Yang
Vertically aligned carbon nanotube (VACNT) arrays have been explored as an absorber of thermal-type photodetectors. A long and dense VACNT array absorbs a wide spectral range of incident light with high absorption rate, but has a high thermal mass that results in a low response speed. To achieve a small thermal mass, a shorter and less dense VACNT array is needed. In addition, the high temperature needed to grow the VACNTs is detrimental to the functional sensing materials of the photodetector. The height, density, and growth temperature of VACNTs need to be optimized to achieve a working absorber that has high absorption rate and a high response speed. In this work, a low-temperature plasma enhanced chemical vapor deposition process is used to prepare various VACNT arrays with different heights and densities by controlling the CNT growth parameters. The absorption coefficients of the resulting samples are measured with Fourier transform infrared spectroscopy. An effective medium theory (EMT) is adopted to establish a working model of the VACNTs. Using experimentally extracted CNT density and height as fitting parameters, the EMT model is fitted to obtain theoretical absorption coefficients, which are found to be comparable to the experimentally measured absorption coefficients. Our experimental and theoretical investigations pave the way for future studies to integrate CNTs with infrared photodetectors.
505720
Isabela Barreto da Costa Januário Meireles, Marcelo Fernando Cipreste, Pedro Lana Gastelois, Waldemar Augusto de Almeida Macedo, Dawidson Assis Gomes and Edésia Martins Barros de Sousa
Gold nanoparticles have been widely investigated for biomedical applications due to their optical properties. These particles present the interesting feature of absorbing light when stimulated with laser radiation to generate heating. Among the possible morphologies for synthetic gold nanoparticles, gold nanorods have properties of great interest for applications in the photohyperthermia processes. Due to their morphology, gold nanorods can absorb light at longer wavelengths comprising specific regions of the electromagnetic spectrum, such as the region of the biological window, in which laser radiation has less interaction with tissues. However, these nanoparticles present limitations in biomedical applications, such as low colloidal and thermal stabilities that can be overcome by coating the gold nanorods with silica MCM-41. The silicate covering can provide greater stability for gold nanorods and allow multifunctionality in treating different diseases through photohyperthermia. This work developed a specific chemical route through seed and growth solutions to synthesize gold nanorods with controlled particle size, rod morphology, and silica covering for photohyperthermia applications. The synthesized samples were characterized through a multi-technique approach that successfully demonstrated the presence of gold nanorods inside the silica coating, presenting high stability and desirable textural and morphological characteristics for bioapplications. Furthermore, silica-coated gold nanorods exhibit high biocompatibility and great performance in generating therapeutic heating by absorbing laser radiation in the biological window range, making the system developed in this work a promising agent in photohyperthermia.
505721
Guannan Yang, Haiqi Lai, Wei Lin, Jin Tong, Jun Cao, Jiye Luo, Yu Zhang and Chengqiang Cui
In this paper, the particle size effect on the sintering behaviors of Cu particles at nanometer to micron scale is explored. The results show that micron-sized particles could form obvious sintering necks at a low temperature of 260 °C, exhibiting a shear strength as high as 64 MPa. A power relation of x ∝ a0.8 between sintering neck radius (x) and particle radius (a) is discovered, and a sintering model with a quantitative relational expression of (x/a)5 = 160γδDt/3akT is proposed by considering the surface tension driven microflow process between adjacent particles to predict the growth of sintering necks. It is concluded that the sintering process of particles at nanometer to micron scale is controlled by microflow mechanism instead of diffusion mechanism. Our proposed model provides a new theoretical basis for understanding the kinetic growth mechanism of sintering necks of metal particles.
505722
Wei Huang, Dejin Zhou, John Lee, Jiaqiang Sun, Shusheng Zhang, Hong Xu, Jun Luo and Xijun Liu
Visible light-driven photoreduction of CO2 and H2O to tunable syngas is an appealing strategy for both artificial carbon neutral and Fischer–Tropsch processes. However, the development of photocatalysts with high activity and selectivity remains challenging. For this case, we here design a hybrid catalyst, synthesized by in situ deposition of Ag crystals on GaN nanobelts, that delivers a tunable H2/CO ratio between 0.5 and 3 under visible light irradiation (λ > 400 nm). The obtained photocatalyst delivers a maximal turnover frequency value of 3.85 h–1 and a corresponding yield rate of 2.12 mmol h–1 g–1 for CO production, while the photocatalytic activity keeps stable during five cycling tests. Additionally, syngas can be detected even at λ > 600 nm. Experiments and mechanistic studies reveal that the existence of Ag crystals not only extends the light absorption region but also promotes the charge transfer efficiency, and thereby leading to a photocatalytic improvement. Accordingly, the present work affords an opportunity for developing an efficient photo-driven system by using solar energy to alleviate CO2 emissions.
505723
Xuejun Xu, Xiaowen Hu, Xiaoli Li, Mingming Yang, Jingtao Liu, Qinglin Guo, Ying Wang and Baolai Liang
Two samples with [001] orientated rhenium disulfide (ReS2) nanowalls (NWs) grown above and in front of precursor (NH4ReO4) by chemical vapor deposition were investigated. The temperature-dependent photoluminescence (PL) indicated that the PL peak exhibited linear blue-shift at a rate of ∼0.24 meV K−1 with increasing the temperature from 10 to 300 K, while the linewidth monotonically increased due to the exciton–phonon interaction. This abnormal blue-shift of PL emission energy, which is explained by a competition between the band gap shrinkage and the energy level degeneracy with respect to the increase of temperature and lattice constant, enables ReS2 NWs to possess great potential for development of thermal sensors. In addition, exciton localization effect in the ReS2 NWs from abundant edges and weak interlayer interaction was also observed to be related to the height and density of ReS2 NWs. These results not only enrich the understanding for exciton dynamics in ReS2 NWs, but also help to exploit ReS2 NWs for device applications.
505724
Cheng Huang, Yin Yao, Xianghe Peng and Shaohua Chen
FCC-structured CoCrFeMnNi high entropy alloy (HEA) has attracted abroad interests for years because of its excellent mechanical properties, except for strength. Recent experiments have reported a kind of nano-laminated dual-phase (NLDP) FCC/HCP structure that can strengthen the HEA. However, it is still unknown why the HEA can be strengthened by this kind of NLDP structure. Here, we employ molecular dynamics simulations to study the atomistic strengthening mechanism of the NLDP HEA. Dislocation-assisted multiple plastic deformation mechanisms in both FCC and HCP single phase HEAs are observed, and amorphization is also found in the plasticity of HCP phase, which are consistent with the previous experimental characterizations. The HCP phase possesses higher strength because of its higher stacking fault energy, higher Peierls–Nabarro stress and less active dislocation slip systems. It is also found that the introduction of HCP phase can enhance the mechanical properties, including yield stress, yield strain and plastic flow stress, of the NLDP HEAs, which also show volume fraction dependence. And the phase boundary plays crucial roles in the deformation and strengthening of the NLDP HEAs. The plastic deformation of the NLDP HEAs can be divided into two stages, i.e. stage I (plasticity only appears in FCC lamella) and stage II (plasticity in both FCC and HCP lamellas). With the increase of volume fraction, the lamella thickness of FCC matrix phase decreases, leading to continuous strengthening of yield properties and flow stress of stage I because of suppressed dislocation nucleation and confined dislocation motion in FCC matrix phase by the phase boundary. While there is no monotonous relationship between the flow stresses of stage II and the increasing volume fraction of HCP phase, which can be attributed to the competitive mechanisms between strengthening effect of phase boundary on the dislocation motion in FCC phase and softening effect of phase boundary on the dislocation motion in HCP phase. The results should be helpful for understanding the underlying physical mechanism of strengthening of HEAs with NLDP structure.
505725
Deepak Kumar Dinkar, Bijoy Das, Raghavan Gopalan and Brijnandan S Dehiya
Spinel NiFe2O4 nanoparticles have been synthesized via hydrothermal route using Mangifera indica flower extract (MIFE) as a green surfactant and reducing agent. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy techniques have been used to determine the structure and morphology. The formation of single-phase, monodispersed NiFe2O4 with mixed morphology, the predominant shape being of equi-axed nanoparticles having an average particle size ≲45 nm, is observed. The thermal magnetization of as-synthesized NiFe2O4 nanoparticles shows ferromagnetic to paramagnetic phase transition at Tc ∼ 825 K. These nanoparticles show a very high saturation magnetization (Ms) value of 55 emu g−1 close to the bulk material and amongst the highest reported values for green synthesized NiFe2O4 nanoparticles. This material has a coercivity (Hc) of 0.15 kOe and remanent magnetization (Mr) of 8.5 emu g−1. The as-synthesized NiFe2O4 nanoparticles show bandgap energy of 2.02 eV, derived from UV–vis absorption measurement, which is suitable for effective solar photocatalytic reactions. When exposed to sunlight in the presence of as-synthesized NiFe2O4 nanoparticles, 93% of MB-dye degradation is measured in 80 min, indicating excellent photocatalytic properties. Based on the as-synthesized NiFe2O4 nanoparticles’ observed properties, the effectiveness of MIFE as an environmentally friendly surfactant, and the low-cost dye-degradation prospects of green synthesized NiFe2O4 nanoparticles are affirmed.
Corrigendum
509501
The following article is Free article
Yating Zhang, Xiaoxian Song, Ran Wang, Mingxuan Cao, Haiyan Wang, Yongli Che, Xin Ding and Jianquan Yao