Special Issue Article
072001
The following article is Open access
T. Luda, C. Angioni, F. Stefanelli, C. Bourdelle, D. Fajardo, M. Dunne, E. Fable and G. Tardini
Accurately predicting the performance of fusion reactors like ITER is challenging due to uncertainties in scaling laws and limited validation of integrated models. This work presents numerical plasma size scans using the Integrated Model based on Engineering Parameters (IMEP) to investigate its capability to correctly capture the effect of the plasma size on pedestal and global confinement. The scans reveal that IMEP predictions closely align with IPED and the IPB98(y,2) scaling law, and suggest more optimistic confinement trends than the ITPA20-IL scaling law. Simulations of the ITER 15 MA baseline are presented, where IMEP predicts a fusion power of 600 MW and a gain of Q = 12, with pedestal pressures comparable to EPED predictions. The analysis highlights the impact of fueling methods, separatrix density, heating power, and rotation on confinement and performance, emphasizing the need for robust models to account for pedestal and core dynamics. These findings enhance confidence in IMEP predictions for ITER and future reactors, demonstrating its efficacy in investigating the impact of various factors on fusion performance, pedestal and global confinement.
Letters
074001
The following article is Open access
Predrag S. Krstic, Anurag Maan, Richard Majeski and Bruce E. Koel
We investigate how growth of an oxide film will influence the deuterium recycling properties of Li on plasma facing surfaces. Lithium films on the walls or plasma-facing material surfaces of a fusion vacuum vessel improves plasma performance in part by removing residual impurity atoms from the plasma. Oxygen atoms, from residual water vapor or eroded oxide surfaces, are a prominent ubiquitous impurity that can create a layer of oxide on lithium films. The results of the work herein also indicate a possibility for determining the thickness of the oxide layer on such Li films by measuring the reflection probability of incident deuterium particles from the surface.
074002
The following article is Open access
Haotian Chen, Xishuo Wei, Hongxuan Zhu and Zhihong Lin
Global gyrokinetic simulations find a strong suppression of ion temperature gradient (ITG) turbulence by zonal flows in stellarators optimized for neoclassical transport. The reduction of the ITG transport by the zonal flows in quasi-helical symmetric (QH) and quasi-isodynamic (QI) stellarators are much larger than a quasi-axisymmetric stellarator or a tokamak, thanks to higher linear residual levels and lower nonlinear frequencies of the zonal flows in the QH and QI. The transport level and energy confinement time in the QH and QI are similar to the tokamak with the same size and temperature gradient, despite the much larger linear growth rates in the stellarators.
Papers
076001
The following article is Open access
S. Varoutis, C. Tantos, H. Strobel, D. Boeyaert, Y. Igitkhanov, F. Litovoli, C.P. Dhard, V. Haak, D. Naujoks and the W7-X Team
The present work is focused on a 3D numerical assessment of the Wendelstein 7-X (W7-X) particle exhaust. For all the numerical simulations the direct simulation Monte Carlo solver of the DIVGAS workflow, has been employed. The complex 3D geometry of the sub-divertor region includes the pumping gap panel, supporting structures, cooling pipes as well as the cryo-vacuum pump. All the considered flow simulations correspond to the Standard magnetic configuration of W7-X. The main conclusions, which can be extracted from the present numerical analysis could be summarized as follows; The coupling between EMC3-EIRENE and DIVGAS, which considers the fact that the incoming neutral particle flux at the sub-divertor is based on realistic plasma background, has been demonstrated. Three plasma scenarios have been considered, for which is clearly seen that by increasing the heating power, the neutral pressure as well as the resulting pumping efficiency is increased. The obtained numerical results of the neutral pressure in the sub-divertor lie within a more general scan matrix, which assumes a wider range of incoming particle flux, namely 1019–1024 (s−1). It has been observed that, the sub-divertor neutral pressure is proportional to the incoming neutral particle flux, with the effective pumping speed to be a constant of proportionality. The influence of switching off the cryo-vacuum pump on the sub-divertor pressure is rather modest and a weak increase of the neutral pressure in the sub-divertor is expected. Correlations of the sub-divertor pressure with the total incoming particle flux as well as the individual pumped flux at each of the AEH and AEP sections have been deduced. Moreover, it has been demonstrated that the influence of the incoming neutral particle flux on the albedo coefficient at the AEH and AEP pumping gaps is rather weak. All the above numerical findings will actively support the optimization of the W7-X particle exhaust, in view of future experimental campaigns.
076002
The following article is Open access
Meiye Pan, Lipeng Sun, Yifan Zhang, Jing Wang, Laima Luo and Yucheng Wu
This study presents a systematic investigation of the synergistic effect of deuterium and helium on the microstructural evolution of W–Y2O3 material during plasma exposure. The effect of single D/He and sequential D/He, He/D plasma exposure on the stability of Y2O3 nanoparticles and the microstructural evolution of the W matrix were investigated using scanning electron microscopy and transmission electron microscopy. The results indicate that Y2O3 particles undergo a significant size change during plasma exposure, and this process was significantly influenced by the synergistic effects of hydrogen and helium. The size evolution of Y2O3 particles is controlled by three mechanisms: the etching-controlled process at the initial stage, followed by deposition-controlled process or mixed-controlled processes. Interestingly, the fuzz structure on the surface of Y2O3 particles is proved to be W instead of Y2O3, which results from the deposition during plasma exposure. Significant synergistic effects of deuterium and helium were observed, in which the strong combination of H and He-vacancy composites suppressed the bubble formation and growth, leading to a different evolutionary dynamic.
076003
The following article is Open access
Bin Luo, Shijian Lin, Yinghong Li, Junjie Tan, Lihong Nie, Qisen Ren, Hao Yang and Hongtao Huang
Deuterium and tritium are easy to permeate into the fusion reactor internals, and Fe–Al/Al2O3 composite coating can effectively hinder the permeation behavior of hydrogen isotopes. However, the temperature in the preparation process of Fe–Al/Al2O3 coating in many literatures is high, which will affect the mechanical properties of 316 l stainless steel. In this paper, Fe–Al/Al2O3 coating was prepared by pack aluminizing, heat treatment and in-situ oxidation at low temperature of 700 °C or less. The aluminized layer gradually transforms from Fe2Al5 and FeAl3 to FeAl and Fe3Al during heat treatment. Compared with the aluminized layer prepared at 650 °C, the aluminized layer prepared at 600 °C is thinner and the heat treatment time is shorter. The thickness of the oxide layer prepared at 700 °C for 10 h and 24 h in pure O2 atmosphere is 87 nm and 131 nm. The oxide layer has the microstructure of polycrystalline γ-Al2O3 mixed with amorphous Al2O3. The sample aluminized at 600 °C and oxidized in pure O2 atmosphere at 700 °C for 24 h has the best deuterium permeation resistance, and the deuterium permeation reduction factor (PRF) in the range of 450 °C–600 °C is higher than 5000. The PRF increases with the increase of temperature. The possible reason is that the deuterium permeability of 316 LSS substrate increases greatly with the increase of temperature, while that of the coating samples is less affected by the temperature change. The excellent deuterium permeation resistance of the coating is due to the high density of the Al2O3 layer.
076004
The following article is Open access
Minxiang Shu, Zhilin Chen, Yang Yang, Po Huang, Wenxiang Jiang, Shenghan Cheng and Yu Li
The maximum likelihood expectation maximization (MLEM) algorithm has been introduced as a robust solution to address the challenges associated with the high condition number of response matrix encountered in the beta ray induced x-ray spectra (BIXS) technique, specifically for the quantitative reconstruction of tritium amount and depth profiles within plasma facing materials (PFMs) in a fusion reactor. Results suggest that the MLEM algorithm demonstrates rapid convergence properties in the reconstruction process. The reconstruction error for tritium amount in tungsten with typical tritium distributions can be as low as 0.1% after 105-iterations, and the maximum reconstruction error observed in the depth distribution for a single layer consistently remains below 10%. While the reconstruction error for each layer after including the tritium activity as weighted factor is consistently less than 0.5%. Consequently, utilizing MLEM and BIXS techniques, the quantitative determination of tritium within PFMs can be achieved non-destructively, and it is also independent of prior knowledge regarding the tritium amount within the materials. This approach holds significant promise for the assessment of tritium retention, diffusion behavior and the development of tritium removal strategies.
076005
The following article is Open access
L. Yu, L. Wang, X.L. Zou, X. Lin, L.Y. Meng, Q.Q. Yang, X.M. Zhong, L.Q. Xu, A.D. Liu, R.R. Liang et al
The divertor detachment is important for the improved confinement mode (I-mode) to serve as a reliable operating scenario in future fusion reactors. A reproducible steady-state I-mode operation with the energy detachment of the inner target has been achieved with the lower single-null configuration on the Experimental Advanced Superconducting Tokamak (EAST). Compared to the high confinement mode (H-mode), I-mode has a lower electron temperature on the inner divertor target and can achieve energy detachment at a lower density. In addition, dedicated experiments on neon (Ne) seeding to assist the exhaust of steady-state heat flux in I-mode discharges have also been successfully carried out on EAST. A significant reduction of the particle flux caused by the Ne impurity radiation was observed at both inner and outer divertor targets without I-L back-transition on EAST for the first time. This may be due to the ‘corner effect’ of the EAST right-angled divertor with a high divertor closure, which can effectively trap the impurity particles and thus reduce the influence of impurity on the main plasma. Furthermore, good core-edge compatibility was also obtained in the detached I-mode plasma with a radiative divertor. This study offers an attractive scenario of I-mode operation for avoiding excessively high transient and steady-state heat loads simultaneously in future fusion reactors.
076006
The following article is Open access
J. Poley-Sanjuán, A. Clément, A. Fasoli, A.N. Karpushov, A. Jansen Van Vuuren, B.P. Duval, J. Ayllon-Guerola, M. Garcia-Munoz, M. Toussaint, M. Vallar et al
A novel Fast Ion Loss Detector was designed, manufactured, installed and commissioned at the Tokamak á Configuration Variable. This is the first Fast Ion Loss Detector to feature four collimators that enable simultaneous detection of co- and counter-current fast-ion losses for reversed and forward magnetic fields. The detector is, thus, sensitive to all magnetic field scenarios and simultaneously to positively and negatively charged particles across the complete range of operational conditions. The diagnostic is equipped with a dual-camera system: a complementary metal oxide semiconductor (CMOS) offering high-spatial resolution with medium-temporal resolution (up to ∼3.6 kHz frame rate) with a second, discrete chord camera, providing medium-spatial resolution with high temporal resolution (up to four MHz bandwidth). Together with a fast scintillator, the fast camera system (made of 128 avalanche photodiodes) allows velocity-space resolved measurements of fast-ion losses that retain the signal frequency characteristics. The detector’s energy-pitch sensitivity starts from ∼5 keV in energy, E, with up to ∼0.95 in pitch,
. It was commissioned across all four possible configurations of magnetic field and plasma current polarities. The fast avalanche photodiodes signal was velocity-space mapped with a good agreement to the high-resolution CMOS camera, but now features µs temporal resolution. The scintillator emission was mapped to velocity-space, showing a clear match between both the CMOS and the fast camera while retaining the frequency characteristics, which, for one of the discharges, include a sawtooth mode.
076007
The following article is Open access
B.C.G. Reman, H. Järleblad, Y. Dong, J. Eriksson, M. Nocente, Y. Kazakov, E. Lerche, D. Van Eester, R.O. Dendy, D. Moseev et al
Recently-developed methods are used successfully to reconstruct the two-dimensional velocity-space distribution of the energetic minority MeV ion tail created by heating in the ion cyclotron range of frequencies (ICRFs) in the D–D
–3He three-ion scheme. This reconstruction is based on neutron emission spectroscopy and gamma-ray spectroscopy measurements of JET plasma 95679. These datasets present challenges in velocity-space tomography which are met by collisional regularisation coupled to a sparsity-promoting regularisation technique. In combination, these capture the energetic ion tail in pitch-angle as well as in energy. Our reconstructions highlight the importance of diagnostics that can probe the plasma with oblique lines-of-sight with respect to the direction of the confining magnetic field. Our inferred fast-ion distribution corroborates experimentally the pitch angle tilt of the energetic ion tail predicted analytically, and by TRANSP simulations, for the three ion ICRF scheme. The synergies between neutral-beam injection and ICRF heating are captured by these diagnostics, and we are able to validate models of electromagnetic ICRF wave heating directly from the experiments.
076008
The following article is Open access
Minglong Wang, Chenguang Wan, Jingjing Lu, Zhi Yu, Bingjia Xiao, Yanlong Li, Xiaoxue He, Zhengping Luo, Qiping Yuan, Yemin Hu et al
The integrity of tokamak plasma diagnostic data is critical for physics research and the development of experimental fusion device. Sensor failures, data acquisition errors, or limitations in diagnostic systems (e.g. absent electron temperature diagnostic) pose significant challenges for experimental data analysis, physical integrated simulation, and the design and optimization of tokamak experiment. To address this, we propose a data-driven machine learning approach based on time series extrinsic regression (TSER) to reconstruct missing electron temperature data in tokamak experiments. By constructing and training TSER models, we can effectively reconstruct missing electron temperature measurement while capturing the complex interrelationships within multiple time series signals. This study provides a solution for enhancing the integrity and reliability of tokamak diagnostic, thereby strengthening the foundation for future fusion research. Comprehensive test and evaluation results show that our method is capable of achieving a confidence level of over 95.9% to ensure that the reconstruction of electron temperature throughout the discharge process is within double the standard deviation error of the true value, meeting the stringent requirements of physics research and integrated simulations.
076009
The following article is Open access
J.R. Martín-Solís, J.A. Mier, F.J. Artola and A. Loarte
The fast deconfinement of a vertically unstable runaway beam is investigated using a 0-D model which includes self-consistently the vertical plasma motion and the generation of runaway electrons Kiramov and Breizman (2017 Physics of Plasmas24 100702). It is found that due to the decay of the runaway current during deconfinement, the plasma is vertically accelerated, leading to a substantial enhancement of the electric field when it touches the wall, which can result in a large runaway avalanche, regeneration of the runaway current and noticeable energy deposition on the runaway beam. The dependence of the conversion of magnetic into runaway kinetic energy on the characteristic deconfinement time of the runaway electrons, the resistive time of the residual ohmic plasma during the disruption, and the initial current and position of the runaway beam is also investigated. Negligible conversion of magnetic into runaway kinetic energy and runaway regeneration are found for characteristic deconfinement times lower than 0.5 ms and low temperatures (a few eVs) of the residual ohmic plasma. Moreover, estimates of the power fluxes on the plasma facing components suggest that, unless the runaway current at deconfinement is small enough (
), shorter deconfinement times would be required to increase the runaway wetted area to levels enough to avoid melting of the first wall materials (Be or W).
076010
The following article is Open access
Fei Sun, Qihang Liu, Baichuan Xu, Xiao-Chun Li, Jipeng Zhu, Dahuan Zhu, Hai-Shan Zhou, Hongxiang Zong, Lai-Ma Luo, Yasuhisa Oya et al
In fusion reactors, plasma-facing materials (PFMs) work under a complex irradiation environment. A lot of irradiation defects will be generated in tungsten (W), primary candidate for PFMs, leading to a substantial amount of hydrogen fuel retention. Among various irradiation induced defects, <100> interstitial dislocation loops can stably exist and trap hydrogen isotopes, significantly threatening the safety of fusion reactors. Therefore, understanding the mechanism behind the trapping and de-trapping behavior in <100> interstitial dislocation loops for hydrogen isotopes is an urgent challenge. In this work, the microscopic kinetic behavior of deuterium (D) trapping/de-trapping in <100> interstitial dislocation loops was systematically investigated. It shows that <100> dislocation loops exhibit the highest D atom binding energy near the loop, approximately 1.5 eV. As a result, D atoms tend to be trapped in the regions closest to the loop. Two possible migration pathways for the trapped D were explored, and the results indicate that D prefers to migrate along the dislocation loop. As temperature increases, the trapped D atoms gradually transition from short-range vibrations within the dislocation loop to long-range migration along the loop and can de-trap from the loop at higher temperatures. Calculations of the activation energy for D de-trapping from the dislocation loop suggest that D trapping in the loop follows a multi-level mechanism. Comparison with the binding energies and thermal desorption spectra of other defects reveals that <100> dislocation loops are the strongest trapping sites for hydrogen isotopes among dislocation-type defects. This study provided a comprehensive understanding of the trapping and de-trapping behavior of hydrogen isotopes in <100> interstitial dislocation loops under a fusion environment, which carries practical implications for evaluating tritium retention in PFMs.
076011
The following article is Open access
Donguk Kim, Taeuk Moon, Choongki Sung, Eisung Yoon, Sumin Yi, Jisung Kang, Jae-Min Kwon, Tobias Görler, Emily Belli and Jeff Candy
This study presents a cross-verification of fast ion effects on turbulence through a systematic comparison of two leading gyrokinetic codes, GENE Jenko et al (2000 Phys. Plasmas7 1904–10) and CGYRO Candy et al (2016 J. Comput. Phys.324 73–93), using L-mode plasma profiles from KSTAR for local linear and nonlinear electromagnetic simulations. The focus is on the impact of fast ions and rotation effects on energy flux, aiming to identify the similarities and differences between these codes in the context of turbulence transport research. The analysis shows consistency in linear stability results, fractional changes in energy flux, changes in the spectral distribution of energy fluxes, fluctuations and phase angle with fast ions, and zonal shearing between the codes. However, discrepancies arise in absolute thermal energy levels and rotation effects on energy transport, especially in the presence of fast ions. The study underscores the critical importance of phase angle analysis in gyrokinetic code verification, particularly when assessing fast ion effects on turbulence. Additionally, it highlights the need to examine quantities at lower levels of the primacy hierarchy, as discrepancies at lower levels can lead to divergent results at higher levels. These findings indicate the necessity for further investigation into these discrepancies and the novel phase angle structures observed, contributing to the advancement of accurate transport predictions in fusion plasmas. The near-marginality inferred in this study introduces additional challenges for precise cross-code comparisons; future research will further explore strategies to address these issues and enhance verification methodologies.
076012
The following article is Open access
H.J. Sun, P.J. Lomas, G.F. Matthews, E. Lerche, M. Faitsch, C. Giroud, D. King, M. Bernert, M. Dunne, L. Frassinetti et al
This work examines the separatrix and Scrape-off-Layer (SOL) characteristics in three scenarios on JET: the Quasi-Continuous Exhaust (QCE) regime, the ITER Baseline scenario, and the X-point Radiator (XPR) regime. All three scenarios are potentially compatible with reactor operations, as they aim to provide power exhaust solutions through different approaches. The QCE regime is distinguished by its generally higher separatrix and SOL collisionality, associating with broader SOL width. These features, combined with the near-double-null (DNX) configuration, introduce several operational challenges on JET. The resulting broader SOL interacts with fast Beam neutrals, contributing to an unfavorable power load on local limiter. The heat load on the Upper Dump Plate Tiles in the QCE regime can be up to 5–6 times higher compared to the other scenarios. Additionally, the energy distribution shows a pronounced inner-outer asymmetry in QCE pulses, with the energy deposited on the outer limiter being up to four times higher than on the inner limiter. However, through careful operational planning and robust real-time protection system, the power loads were effectively managed within acceptable limits during QCE pulses, enabling successful scientific outcomes. As a result, the QCE regime serves as a case study to illustrate the critical need for integrating physics understanding, risk identification, operational strategies, and robust real-time protection to successfully implement new scenarios for fusion devices.
076013
The following article is Open access
Huapeng Zhang, Lunan Liu, Wei Zhang, Xuan Sun, Xinjun Zhang and Baolong Hao
This study investigates the ion cyclotron emission (ICE) excited by tritium ions generated through deuterium‒deuterium fusion reactions in the Experimental Advanced Superconducting Tokamak (EAST). ICE is an electromagnetic instability driven by fast ions, and its excitation mechanism is primarily explained by magnetoacoustic cyclotron instability (MCI) theory, which describes energy transfer between fast ions and Alfvénic waves. Since ICE is closely related to the distribution of fast ions, the MCI growth rate is computed using linear theory based on the fast ion distribution calculated by TRANSP. Based on experimental parameters from EAST, we apply MCI theory to analyze the ICE growth rate and investigate the effects of key factors such as the propagation angle and the ratio of fast tritium ions to bulk deuterium plasma density. Experimental findings indicate that ICE excitation is at the fundamental frequency, simulations support that the propagation angle is approximately between 80° and 85°. At the fundamental frequency, the MCI growth rate increases with the propagation angle but decreases as the fast tritium ion density decreases. These results provide insights into the physics of ICE excitation and highlight its potential as the diagnostic tool for fast ions in future fusion reactors, including CFETR, DEMO, and ITER. Understanding ICE can help optimize fusion plasma performance and improve fast-ion confinement in next-generation magnetically confined fusion devices.
076014
The following article is Open access
Y.L. Liu, D. Hu, S.Y. Dai, Z. Liang, Z.H. Gao, Y. Feng, M. Hoelzl, S.Q. Korving, G.T.A. Huijsmans, L. Wang et al
The sputtering and transport of tungsten (W) impurity in the EAST tokamak have been investigated by the nonlinear magnetohydrodynamic code JOREK. The hybrid kinetic-fluid model in JOREK enables us to study the impacts of the Larmor gyration, sheath acceleration and, W sputtering energy and D+ impinging energy on the W sputtering and transport, which are generally simplified and ignored in fluid transport codes. The simulated W gross erosion flux exhibits a reasonable agreement with the measured data obtained through spectroscopy diagnostics on EAST. By means of the kinetic model in JOREK, it is indicated that the gyration and sheath effects can enhance the W redeposition probability on divertor targets by around three times compared to the fluid treatment. Moreover, the Thompson energy distribution for sputtered W particles has been attempted to survey the influence of the W sputtering energy on the W transport and redeposition, which shows a small discrepancy in the mean free path and redeposition probability of W particles compared to the case with a fixed sputtering energy. The detailed analysis of the W sputtering under the Maxwellian velocity distribution has been conducted, revealing significantly higher W erosion and leakage compared to the monoenergetic case. Eventually, the combined effects of the Larmor gyration, sheath acceleration, W sputtering energy and D+ impinging energy on W transport and redeposition behaviors have been investigated under varying plasma scenarios. It is found that the prompt redeposition of W particles plays a dominant role in the entire W redeposition compared to the long-range redeposition.
076015
The following article is Open access
Timo J. Bogaarts and Felix Warmer
Neutron interactions in a fusion power plant play a pivotal role in determining critical design parameters such as coil-plasma distance and breeding blanket composition. Fast predictive neutronic capabilities are therefore crucial for an efficient design process. For this purpose, we have developed a new deterministic neutronics method, capable of quickly and accurately assessing the neutron response of a fusion reactor, even in three-dimensional geometry. It uses a novel combination of arbitrary-order discontinuous Galerkin spatial discretization, discrete-ordinates angular and multigroup energy discretizations, arbitrary-order anisotropic scattering, and matrix-free iterative solvers, allowing for fast and accurate solutions. One, two, and three-dimensional models are implemented. Cross sections can be obtained from standard databases or from Monte-Carlo simulations. Benchmarks and literature tests were performed, concluding with a successful blanket simulation.
076016
The following article is Open access
M. Pokornik, S.F. Khan, J.A. Gaffney, B. MacGowan, A. Maris, K. Humbird and S. Haan
The parameter space involved in designing an inertial confinement fusion shot at the National Ignition Facility (NIF) is massively multi-dimensional and the cost of a single shot makes a comprehensive set of sensitivity studies in the laboratory impractical. The use of machine learning to overcome these challenges has gained popularity and has had several successful applications by the scientific community. We extend on these efforts by training a neural network (NN) on information about the experimental design, engineering elements, and drive asymmetry to predict with uncertainty the
neutron yield of an experiment. We find the measured and model predicted values are in good agreement, with an R2 value of 0.91 for a randomly selected test dataset. Almost all the predicted 95% credible intervals contain the corresponding measured value for both training and test datasets. We identify correlations picked up by the NN between the shot design, yield, and variability and use them to motivate shot sensitivity studies. The first shot to exceed the Lawson-like ignition criteria (N210808) was conducted at the NIF and subsequent shots studied the design’s robustness. In a follow-up shot to N210808, our model predicts capsule quality to be the main performance degradation mechanism that prevented the shot from repeating previous performance levels. Shot N221204 was the first shot to exceed a target energy gain of 1. Our model predicts increased yield with reduced coast time for a N221204 study and greater variability for designs with lower peak powers at constant yield. The model’s fast prediction speed and uncertainty prediction are useful for identifying interesting design paths that could warrant further investigation with conventional simulations to search for robust high yield designs.
076017
The following article is Open access
M.H. Li, W.Q. Ma, W.Y. Xu, H.D. Xu, C.B. Wu, J.L. Chen, J. Wang, T. Zhang, D.J. Wu, L.Y. Zhang et al
Reproducible H-mode plasmas with electron cyclotron (EC) waves as the sole auxiliary heating tool have been achieved recently on EAST in a broad range of plasma parameters with an ITER-like tungsten divertor. The macroscopic characteristics of H-mode in the terms of the global energy confinement, the threshold of heating power and plasma density for the L–H transition are presented. The enhanced confinement factor H98(y,2) is around 1.0 in most cases, but it can be up to 1.25 for some discharges. Dedicated EC current drive (ECCD) experiments were performed in L-mode plasmas with relatively low density and the EC current (IEC) has been determined unambiguously on EAST for the first time. The measured EC current reaches 83 kA, representing about 1/3 of the total plasma current and corresponding to a CD efficiency (ηCD) ∼ 0.15 (1019 AWm−2). The experimental ECCD results are analyzed with both the ray-tracing and Fokker–Planck codes. It is found that the EC driven current is underestimated by the linear ray-tracing code TORAY-GA to some extent, and is overestimated by the quasi-linear Fokker–Planck modeling with LUKE in low density and high EC power plasmas.
076018
The following article is Open access
Robert Davies, Christopher B. Smiet, Alkesh Punjabi, Allen H. Boozer and Sophia A. Henneberg
We apply topological methods to better understand how the magnetic field in the stellarator edge can be diverted away from the confined region. Our primary method is calculating the winding numbers of closed contours, which gives information on the number and nature of fixed points within a bounded region. We first apply this to the non-resonant divertor Hamiltonian system, and present a simple explanation for the system’s diversion: trajectories are guided away from the confined region by X-points which are ‘unpaired’ i.e. do not have corresponding O-points and therefore do not resemble an island chain. We show how similar phenomena can occur in a similar, axisymmetric Hamiltonian system. Secondly, we find examples of neoclassically optimised stellarators in the quasi-symmetric stellarator repository database which divert the magnetic field via unpaired X-points. We present and discuss three examples, each containing novel phenomena which might be desirable for stellarator divertors. These examples serve as an illustration of new divertor possibilities which exist in realistic stellarators, which may ultimately have application for future experiments and reactors.
076019
The following article is Open access
Xu Yang, Yueqiang Liu, Li Li, Jiao Yuan, Xin He, Yuling He, Guoliang Xia and Guanqi Dong
The MARS-F code (Liu et al 2000 Phys. Plasmas7 3681), has been updated to include two-fluid (2F) effects for linear stability analysis of magneto-hydrodynamic modes. The updated code, referred to as MARS-2F, is then applied to study flow stabilization of the resistive wall mode (RWM) in a reactor-scale negative-triangularity (NT) plasma, with the results also compared to that obtained in a positive-triangularity counterpart. The RWM is computed to be stable in plasmas with slow or even vanishing toroidal fluid flow according to the 2F-model, with much wider stability window for the NT plasma. This stability regime is attributed to the E × B flow stabilization, which is finite even at vanishing (single) fluid flow since the diamagnetic flow remains finite. This finding provides an alternative interpretation of the RWM stability in the slow-flow regime in tokamak plasmas as observed in experiments. Varying the fluid flow shear and a parallel sound wave damping model confirms the robustness of the 2F-model in predicting the stable window for the RWM in the slow-fluid-flow regime.
076020
The following article is Open access
C.X. Luo, L. Zeng, J. Bao, X. Zhu, T. Tang, R.R. Ma, S.Y. Lin, T.H. Shi, J.P. Qian, H.Q. Liu et al
Multiple Beta-induced Alfvén eigenmodes (BAEs) excited by runaway electrons (REs) have been observed in low-density Ohmic discharges in the EAST tokamak. The toroidal mode number is mainly n= −1 and they rotate in the electron diamagnetic drift direction. These modes in the low frequency range from 10 to 25 kHz, are found to be unstable when the electron density decreases to less than 0.65 × 1019 m−3. BAEs depend sensitively on the RE current fraction. By decreasing electron density, the resistive current is replaced by that carried by the REs. Then more branches of unstable BAEs, which located at different rational surfaces, are simultaneously observed, indicating that BAEs depend sensitively on the plasma beta contributed from REs. Simulation results provided by the global eigenvalue code magnetohydrodynamic Alfvén spectra suggest trapped energetic particles are responsible for the destabilization of these BAEs, which match the resonance condition and the mode locations are close to the plasma boundary.
076021
The following article is Open access
Won Ik Jeong, Gun Woo Nam, Yeongsun Lee, Jongmin Lee, Chanhwi Jeon, Taekyoung Kim, Jong Yoon Park and Y.S. Hwang
An enhanced energy confinement regime with minimized radiative losses has been observed by controlled boronization (BZn) in the Versatile Experimental Spherical Torus (VEST), achieving
without any external fueling. Previously, during the ohmic operation in VEST, the dominant radiative power losses caused by impurity influx continuously increased with the input power, reaching up to 1.4 MW, which resulted in the energy confinement time of
. To suppress radiative power losses, the BZn system, employing carborane (
) with an expanded coverage range, is utilized as the final step in the wall-conditioning sequence. As the dose of BZn increased from 0 g to 0.2 g, the radiative losses were successfully suppressed to nearly negligible levels during ohmic discharges, eventually enhancing the energy confinement. However, as the dose increases further, the reacceleration of radiative losses is observed, suggesting that the optimal dose of BZn for radiative loss minimization is 0.2 g. Finally, the controlled BZn at the optimal point resulted in an increase in the energy confinement time by a factor of 2 compared to the 0 g dosed case. In this work, we envisage to optimize the BZn dose to minimize radiative power losses in upcoming fusion reactors.
076022
The following article is Open access
Cong Wang, Weizhe Yang, Haiping Wang, Renjie Yang, Jing Li, Zhijun Wang, Yixiong Wei, Xianli Huang, Chenshu Hu, Zhaoyang Liu et al
076023
The following article is Open access
Nami Li, X.Q. Xu, B.S. Victor, Z.Y. Li and H.Q. Wang
BOUT++ turbulence simulations of the DIII-D reveal that the density profile between the separatrix and pedestal plays a crucial role in the dynamics of edge localized modes (ELMs) and edge plasma turbulent transport. Nonlinear simulations demonstrate that small ELMs in the DIII-D hybrid scenario under high SOL density conditions are predominantly driven by local ballooning modes near the separatrix, stabilizing global instabilities while enhancing localized pressure fluctuations. A key control parameters for ELM dynamics is the separatrix-to-pedestal density ratio,
. A high ratio indicates a shallow gradient, favoring small ELMs, while a lower ratio signals a steep gradient, which increases the likelihood of large ELMs. Comprehensive parameter scans, including
, density gradient profiles near the separatrix, and resistivity, reveal the critical role of these parameters in shaping transitions between turbulence-driven transport and ELM bursting. The scans demonstrate that in high SOL density regimes, small ELMs can result from either global resistive MHD instabilities or local ballooning modes near the separatrix, depending on the steepness of the separatrix density gradient. These findings also highlight the transition from continuous turbulence to small ELMs. The post-crash peak in pressure fluctuations,
, serves as a critical metric for identifying transition from continuous turbulence fluctuations to ELM bursting. Larger
values correlate with ELM bursts driven by local or global instabilities, whereas smaller values indicate turbulence-dominated transport. Drift-Alfvén and resistive ballooning turbulence enhance the entrainment of fluctuations from the pedestal to the SOL, contributing to the complex interplay of dynamics in this regime. These findings emphasize the importance of separatrix density shaping and pedestal gradient control for optimizing ELM behavior in ITER and future fusion devices.
076024
The following article is Open access
Mykola Ialovega, Celine Martin, Cédric Pardanaud, Elodie Bernard, Martiane Cabié, Andrea Campos, Christian Grisolia, Marco Minissale, Thomas Neisius, Thierry Angot et al
076025
The following article is Open access
J.G. van de Lindt, S.J. Wukitch, N. Bertelli and S. Shiraiwa
Initial computational plasma physics scoping and a finite element method antenna modeling design workflow for a symmetric center-fed high-field side high harmonic fast wave traveling wave array (TWA) antenna are reported here. The TWA is designed to generate a test population of fast deuterium ions in an existing D–D tokamak by heating neutral beam deuterium ions, accelerating them from 80 keV to several hundred keV. The resulting fast particles are tailored to mimic key reactor energetic particle parameters with regards to exciting Alfven eigenmode instabilities, allowing for a D–D tokamak like DIII-D or ASDEX-U to replicate reactor-relevant conditions experimentally. Initial scenario scoping for high single-pass absorption as well as good preferential fast ion damping relative to electron damping was completed using the ray-tracing/Fokker–Planck codes GENRAY and CQL3D. Python RF network analysis packages were used to create a custom TWA optimization tool to inform a COMSOL flat antenna design, and Petra-M was used to study cold plasma effects. The TWA produced by this workflow has several novel features when compared to previous TWA studies, including symmetric center feeding, and passive end straps for image current cancellation for reduced impurity production. We show here that the antenna design workflow can readily produce TWA antennas optimized for reflection coefficient, image current cancellation, and launched power spectrum shape; and that a population of fast ions can be generated in the correct region of parameter space, warranting future more detailed studies.
076026
The following article is Open access
Haomin Sun, Justin Ball, Stephan Brunner, Anthony Field, Bhavin Patel, Daniel Kennedy, Colin Roach, Diego Jose Cruz-Zabala, Fernando Puentes Del Pozo, Eleonora Viezzer et al
Based on the analysis of a large number of high-fidelity nonlinear gyrokinetic simulations, we propose a novel strategy to improve confinement in spherical tokamak plasmas by combining up-down asymmetric flux surface shaping with the Low Momentum Diffusivity (LMD) regime. We show that the intrinsic momentum flux driven by up-down asymmetry creates strong flow shear in the LMD regime that can significantly reduce energy transport, increasing the critical gradient by up to 25%. In contrast to traditional methods for generating flow shear, such as neutral beam injection, this approach requires no external momentum source and is expected to scale well to large fusion devices. The experimental applicability of this strategy in spherical tokamaks is addressed via simulations by considering actual equilibria from Mega Ampere Spherical Tokamak and a preliminary equilibrium from SMART.
076027
The following article is Open access
R. Varennes, Z.S. Qu, Y.W. Cho, C. Wan, K. Li, R.A. Heinonen and V. Grandgirard
Getting fast and reliable predictions of turbulent transport properties is an important challenge in magnetic fusion. Previous research (Heinonen and Diamond 2020 Phys. Rev. E101 061201) proposed a data-driven approach using neural networks to predict the particle flux and Reynolds stress in a minimal model of drift-wave turbulence. The present work extends this approach to the interchange instability driven by the magnetic curvature. This study highlights the importance of assessing the reliability of data-driven models, especially in view of their application to more complex high-fidelity simulations. In particular, a figure of merit is introduced to identify regions of the input space where the model’s predictions cannot be trusted. The data-driven model predictions are used to gain insight into the vorticity gradient’s contribution to the turbulent flux and the antiviscous nature of the Reynolds stress.
076028
The following article is Open access
L. Frassinetti, D. King, S. Saarelma, D. Keeling, C. Perez von Thun, C. Giroud, S. Wiesen, A. Kappatou, N. Vianello, E. Alessi et al
076029
The following article is Open access
N.C. Logan, S.K. Kim, S.M. Yang, J.-K. Park, Q. Hu, N. Leuthold, C. Paz-Soldan, S. Gu, D. Weisberg, H. Wang et al
This large database study of resonant magnetic perturbation (RMP) edge localized mode (ELM) suppression thresholds in the AUG, DIII-D, EAST, and KSTAR tokamaks details the key strengths and weaknesses of RMP metrics. The RMP ELM suppression database used for this work contains plasma information at the time of transition from ELMing to ELM suppressed states where a clear experimental threshold is identified. The experimental threshold distributions are compared for five metrics: (1) the island overlap width, (2) pedestal top Chirikov overlap, (3) peeling edge displacement, (4) pedestal top resonant drive, and (5) edge dominant mode overlap. The distributions, the regularity of the dependence on RMP coil currents, and the sensitivities of a given metric to equilibrium reconstruction details are compared. The overlap metric proves to be a good compromise between including the appropriate plasma response physics and maintaining a numerical robustness. This quantity does not exhibit clear power-law scalings for projection, but machine learning can assist in predicting thresholds within the existing parameter ranges and providing uncertainty quantification of those predictions. Two new first-principles models, one utilizing a threshold from the non-linear Modified Rutherford equation evaluated at the pedestal top and one utilizing the SLAYER code to calculate the linear tearing threshold from torque balance, offer possible paths to extrapolation beyond the existing database parameter space.
076030
The following article is Open access
Y. Zhang, W. Zhang, L.Q. Xu, X.D. Meng and Z.W. Ma
In the present paper, we numerically investigate the influence of electron and ion diamagnetic drifts on the nonlinear evolution of kink modes in low-resistivity plasma through the updated CLT code based on bi-fluid model. In the linear stage, electron or ion diamagnetic drift leads to a finite and constant mode rotation frequency. The mode frequency changes differently for cases dominated by electron or ion diamagnetic drift. For cases with dominating electron diamagnetic drift, the mode frequency significantly increases in the nonlinear stage; for cases with dominating ion diamagnetic drift, the mode frequency reduces to zero and even changes its sign. The sudden change of the mode frequency is due to the multiple-X-line reconnection process in low-resistivity plasma. During multiple-X-line reconnection, secondary islands merge into the 1/1 main island due to electron or ion diamagnetic drift, and the X-point of the 1/1 main island suddenly moves to another region. Then the local values of the electron or ion diamagnetic term change dramatically, leading to the sudden change of the mode frequency. In high-resistivity plasma, multiple-X-line reconnection does not occur, and the mode frequency will not change its sign. Meanwhile, if the mode rotates too fast, secondary islands will quickly merge into the 1/1 main island and will not develop to a large amplitude.
076031
The following article is Open access
X.M. Wu, Y. Sun, Q. Ma, S. Gu, Y.F. Wang, K.N. Geng, X.X. Zhang, G.Q. Li, H. Sheng, T. Zhang et al
Changes of pedestal structure and stability caused by n = 4 resonant magnetic perturbations (RMPs) for control of Edge Localized Modes (ELMs) in the EAST tokamak in a target plasma close to the ITER high-Q scenario are studied in this paper. Here, n is the toroidal mode number of RMPs. It is shown that plasma pedestal density profiles are significantly changed at different stages, i.e. ELM mitigation and suppression, during the application of n = 4 RMPs, compared to the phase without RMPs. The pedestal top density decreases while the separatrix density slightly increases, leading to a reduction in the pedestal density gradient at the stage of ELM mitigation. There is a further sudden increase of separatrix density and hence drops of pedestal density gradient after accessing to ELM suppression, which is consistent with the picture that a nonlinear bifurcation in edge magnetic topology at the transition from ELM mitigation to suppression. The decrease in pedestal top density and pedestal density gradient causes the reduction of edge pressure gradient and bootstrap current. Stability analysis using the ELITE code shows that the dominant modes in the phase without RMP are low-n peeling-ballooning modes (PBMs). The growth rate of the low-n PBMs decrease with decreasing edge pressure gradient and bootstrap current, which is consistent with the observation of ELM mitigation and suppression during the application of RMPs. Different effects from edge plasma toroidal rotation, temperature, separatrix density etc on the stability of PBMs are also investigated via numerical modelling based on the reference case in EAST, which could be helpful for the optimization of operational window for accessing to ELM suppression in the future studies.
076032
The following article is Open access
A.S. Liang, X.L. Zou, W.L. Zhong, G.L. Xiao, Z.C. Yang, J. Wen, R. Ke, X.X. He, A. Ekedahl, L. Delpech et al
The effect of lower hybrid current drive (LHCD) on edge velocity shear and turbulence in the HL-2A tokamak has been investigated. Experimental results demonstrate that the LHCD leads to an increase in edge velocity shear at both the inner and outer shear layers, with the magnitude of increment found to be proportional to the applied LHCD power. This enhancement of edge velocity shear is primarily attributed to the changes in the plasma pressure gradient induced by the heating effect of lower hybrid wave. In addition, LHCD also modifies the turbulence at the plasma edge, and it is observed that turbulence at higher wavenumbers exhibits a clear increase with LHCD, whereas turbulence at lower wavenumbers shows no significant change. These observations emphasize the requirement for employing multiple diagnostic tools to capture the full complexity of edge turbulence in tokamak plasmas. Further investigation during the L-H transition reveals that turbulence intensity in the inner shear layer significantly decreases, promoting the formation of the edge transport barrier. However, the turbulence in the outer shear layer remains nearly unchanged during this process. The results indicate that LHCD can affect the edge plasma in tokamaks, particularly in enhancing edge shear flows and influencing turbulence, which is critical for achieving the edge transport barrier in fusion devices.
076033
The following article is Open access
Ziying Jiang, Weixin Guo and Lu Wang
In this work, the source of helium (He) ash is explicitly defined in terms of the full energy distribution function of He ions in deuterium–tritium burning plasmas, and the He ash density profile is subsequently predicted by considering both source and radial transport. By numerically solving the Fokker–Planck equation, including the energy diffusion term, we obtain the distribution function of He ions
in the full energy range and propose a method to quantitatively define the demarcation energy between energetic alpha (
) particles and He ash in energy space. The corresponding source of He ash is then calculated. On the one hand,
in the low-energy region is significantly higher than the classical slowing down distribution function due to energy diffusion, which indirectly enhances the source of He ash. On the other hand, the directly introduced source term by energy diffusion makes He ions diffuse from the low-energy to the high-energy range, which reduces the source and plays the role of a sink for He ash. Combining the competition between the source and sink, the total source
is increased compared to that without energy diffusion. Consequently, the corresponding He ash density profile with the total source is also higher than that without energy diffusion, and closer to that with the source defined by the density of energetic
particles (Angioni et al 2009 Nucl. Fusion49 055013). These results underscore the significance of complete kinetic calculations. Moreover, the complete kinetic calculations presented in this work show that a simple source defined by the density of energetic
particles provides an accurate description, and therefore leads to a predicted density profile of He ash close to that obtained with the full kinetic calculated source.
076034
The following article is Open access
Ting Wang, Xiu-Li Zhu, Mengchong Ren, Yue Yuan, Wangguo Guo, Shiwei Wang, Long Cheng, Di Hu, Yuhao Li and Guang-Hong Lu
Accurate predictions of hydrogen isotope/tritium inventory in tungsten (W), used as a plasma-facing material in fusion reactors, can reduce the uncertainty associated with the self-sustaining fuel cycle. It is well-established that displacement damage generally enhances deuterium (D) retention in W, whereas helium (He) typically reduces it. However, the synergistic interaction between these two factors on D retention in W remains poorly understood. This study investigates the combined influence of displacement damage and plasma-implanted He on D retention in W, with focus on their dependence on D-induced blistering. High-energy (3.5 MeV) Fe13+ irradiations were conducted at 300 K to introduce displacement damage (0.1 dpa) in W. Low-energy (60 eV) He plasma exposure was then carried out at 600 K to generate a He-rich layer at the near surface of both pristine and Fe-irradiated samples. Subsequently, the samples were exposed to D plasma at 500 K, with the ion energy set to 38 eV. The results show that displacement damage increases D retention at low fluences (5 × 1024–1 × 1025 D m−2), but slightly decreases retention at higher fluences (3 × 1025–5 × 1025 D m−2). The impact of He on D retention in W is competitive, depending on the level of irradiation damage. In cases with minimal D-induced blistering (area ratio <13%), the trapping effect dominates, with He-induced defects acting as strong D traps, leading to increased D retention. However, in highly damaged W, where high-density defects are induced by displacement damage or severe surface blistering (area ratio >33%), the diffusion barrier effect of He-rich layer outweighs the trapping effect, leading to decreased D retention. The combined effect of displacement damage and He increases D retention at low D fluences and decreases it at high D fluences, with the magnitude of these changes deviating from a simple linear addition of their individual effects, indicating a complex, non-linear interaction.
076035
The following article is Open access
Guo-Hong Deng, Peng-Cheng Xie, You-Wen Sun, Hui-Hui Wang, Jian Xu, Qun Ma, Shuai Gu, Hui Sheng, Hua Yang and Gao-Ting Chen
The identification of plasma confinement states (L-mode, ELM-free H-mode, and ELMy H-mode) is carried out using a multi-task learning neural network (MTL-NN) in EAST. The identification process can be divided into two tasks: identifying the operational modes and detecting the edge localized modes (ELMs). Dα and Mirnov coil measurements are selected as features for detecting the ELM. Parameters from scaling laws, which are related to thermal energy confinement time and heating threshold of L–H transition, are selected as features for identifying the operational modes. The data set used for supervised learning is collected from ELM control experiments in EAST. The MTL-NN comprises two task-specific layers and a shared layer. The multi-task learning framework allows for mutual error correction between tasks, resulting in higher accuracy and robustness compared to single-task models. Evaluation results demonstrate that the MTL-NN achieves an accuracy of 96.7% on the test set, representing a 3.6% improvement compared to single-task models.
076036
The following article is Open access
N. Aiba, X. Chen, T.H. Osborne and K.H. Burrell
A window for quiescent H-mode (QH-mode) operation in DIII-D plasmas in the diagram of pedestal magnetohydrodynamic (MHD) stability was identified through linear MHD stability analysis, accounting for the effects of plasma rotation and ion diamagnetic drift. The operation window lies between the stability boundaries of the kink/peeling mode (K/PM) identified with and without the inclusion of plasma rotation effects. In this region, the mode remains unstable unless rotation effects are considered alongside the ion diamagnetic drift, which is consistently included in the analysis. The stabilization of the MHD mode, facilitated by the coupled effects of plasma rotation and ion diamagnetic drift, plays a crucial role in widening the window, enabling the attainment of the QH-mode state. Furthermore, the suppression of edge localized modes (ELM) can be achieved by controlling the pedestal structure to ensure the plasma state remains within the operation window. The location of the operation window in the stability diagram depends on the K/PM stability properties. Therefore, optimizing conditions for QH-mode requires adjustments based on changes in stability characteristics. A pressure pedestal and its associated bootstrap current density near the last closed flux surface are advantageous for situating the plasma state within the window. However, excessive current density can trigger ELMs. This trend was confirmed through comparisons of MHD stability diagrams between QH-mode and ELMy H-mode plasmas.
076037
The following article is Open access
Wenxiang Li, Jian Liu, Yang Zhang, Jiaxing Tian, Yijia Zhou and Jinlin Xie
For energetic runaway electrons in tokamaks, synchrotron radiation is the main mechanism of energy loss and an important means for diagnosis. It has been revealed that the lowest order guiding-center assumption no longer holds for energetic runaway electron dynamics in complex tokamak fields. Accordingly, an ensuing question is whether the synchrotron radiation laws derived from the guiding-center model still apply to runaway electrons. In this paper, we conduct a detailed study of the errors of guiding-center radiation model (GCRM) under different conditions, thereby providing a basis for its applicable conditions. Numerical calculations show that GCRM aligns closely with the exact synchrotron radiation formula for charged particles in the non-relativistic region. However, in the relativistic region, the discrepancy increases with the pitch angle. Although the violation of guiding-center assumption becomes more pronounced with the increase of relativistic factors, the relative error of the guiding-center radiation rule does not increase with the indicator of the guiding-center deviation, i.e. the relative variations of the background magnetic field
and magnetic moment
within one gyro-period. Instead, the relative error δ decreases as the increase of
and
. However, the pitch angle clearly has a significant impact on the accuracy of the guiding-center radiation law. The strength of the background magnetic field significantly affects the validation of GCRM, particularly at small pitch angles. A weaker magnetic field results in a greater discrepancy. In the parameter space spanned by energy and pitch angle, the relative error δ of total synchrotron radiation power calculated from GCRM reveals a ‘nose-like’ structure, suggesting a surprisingly non-monotonic dependence on these variables. For runaway electrons experimentally measured in several tokamaks, the relative error of the GCRM varies from 86% to 100%.
076038
The following article is Open access
R. Diab, S.G. Baek, A.Q. Kuang, Y. Lin, E.S. Marmar, J.L. Terry, S.J. Wukitch and the Alcator C-Mod Team
The parasitic interaction between ion cyclotron range of frequencies (ICRF) waves and the edge plasma has long limited high-power ICRF utilization in magnetically confined fusion plasmas. In this paper, we report on the successful mitigation of this interaction by power tapering a four-strap field-aligned (FA) antenna in the Alcator C-Mod tokamak. With the antenna operated in dipole phasing (
), the ratio of the power coupled by the central two straps (
) to the power coupled by the outer two straps was varied at fixed total coupled ICRF power (
). With
/
, no enhancement of the plasma potential was measured despite 1 MW of coupled ICRF power. When the antenna is powered, energy deposition increases on its four corners and on neighboring limiter tiles magnetically connected to some of those corners. The energy deposited on the antenna and limiter is minimized together with near-field plasma potentials. Additionally, we show that deviation from
/
enhances wave-plasma interactions in places not magnetically connected to the antenna. These far-field effects are correlated with changes in the antenna spectrum. Hence, on C-Mod, near-field and far-field interactions were minimized for about the same range of
/
. Optimal power tapering was also found to improve ICRF heating efficiency and facilitate H-mode access. Finally, we show that the heat flux pattern on the toroidally aligned antennas reverses with the direction of the RF-induced E×B flow in front of the antenna, a correlation not observed for the FA antenna. We argue that the RF-induced E×B flow, which carries high-density plasma from the near-SOL, is aligned with the FA antenna and does not intercept its corners, where the plasma potential is large. This could explain the previously reported smaller impurity generation by the FA antenna (Wukitch et al 2013 Phys. Plasmas20 056117).
076039
The following article is Open access
A. Kumar, W. Tierens, T. Younkin, C. Johnson, C. Klepper, A. Diaw, J. Lore, A. Grosjean, G. Urbanczyk, J. Hillairet et al
This paper introduces STRIPE (Simulated Transport of RF Impurity Production and Emission), an advanced modeling framework developed to analyze material erosion and the global transport of eroded impurities originating from radio-frequency (RF) antenna structures in magnetic confinement fusion devices. STRIPE integrates multiple physics modules: SolEdge3x for scrape-off-layer plasma profiles, COMSOL for 3D RF rectified sheath potentials, RustBCA for erosion yields and surface interactions, and global impurity transport for 3D ion energy-angle distributions and impurity transport. The framework is applied to an ion cyclotron RF-heated L-mode discharge (#57877) in the WEST tokamak, where it predicts a thirty-fold increase in gross tungsten erosion at antenna limiters during the transition from ohmic to ICRH operation. Additionally, under ICRH conditions, a tenfold enhancement in erosion is observed when comparing RF sheath effects to purely thermal sheath conditions. High-charge-state oxygen ions (
and above) are identified as the dominant contributors to tungsten sputtering. To validate the model, a synthetic diagnostic tool based on inverse photon efficiency (S/XB coefficients) from the ColRadPy collisional-radiative model enables direct comparison with spectroscopic measurements. Model predictions using a plasma composition of 1% oxygen and 99% deuterium show good agreement with observed W − I (400.9 nm) emission for discharge #57877, supporting the accuracy of the STRIPE framework. This study focuses specifically on gross erosion calculations to demonstrate STRIPE’s capabilities. Future extensions of this work will incorporate net erosion, re-deposition, self-sputtering effects, and whole-device modeling of sputtered tungsten impurity transport. STRIPE is also being applied to other RF-heated linear and toroidal devices, offering valuable insights for antenna design, impurity control, and performance optimization in next-generation fusion reactors.
076040
The following article is Open access
G.T. Chen, Q.Q. Yang, J.H. Yang, X. Lin, H. Yang, Z.D. Yang, R.R. Liang, T.H. Wang, B.H. Zhang, L. Wang et al
076041
The following article is Open access
C.A. Orrico, M. van Berkel, T.O.S.J. Bosman, L. Ceelen, W.P.M.H. Heemels, F. Koechl and D. Krishnamoorthy
Reliable core density control with pellet fueling will be necessary to achieve required fusion power output in future fusion tokamaks such as ITER. The discrete nature of fuel pellets, however, complicates the density profile control problem significantly. As a solution, we propose a predictive density profile controller that considers fuel pellets as discrete actuators, while ensuring operation within prescribed density limits. The model predictive control (MPC) scheme we deploy combines the offset-free method to correct prediction model inaccuracies and our novel modified penalty term homotopy algorithm for real-time MPC (PTH-MPC). To demonstrate density profile control with discrete pellets, we couple the PTH-MPC density controller with JINTRAC integrated simulations of the ITER 15 MA/5.3 T scenario, using HPI2 to model discrete pellet ablation and deposition. We compare the density controller performance in integrated simulations using the Bohm/gyro-Bohm turbulent transport model against integrated simulations using the TGLF turbulent transport model. We highlight the necessity of treating pellets as discrete events for controller performance and for remaining within density limits. We conclude that PTH-MPC is a promising candidate for density profile control with pellets fueling in ITER and other future tokamaks and recommend further improvements using learning-based and robust MPC. We also note the limitations of quasi-linear turbulent transport models in simulations involving discrete pellets.
076042
The following article is Open access
Mykola Ialovega, Marcos Xavier Navarro-Gonzalez, Régis Bisson, Jay Anderson, Thierry Angot, Tyler Dabney, Cary Forest, Arkadi Kreter, Danah Velez, Evan Willing et al
Enhanced deuterium retention in tantalum (Ta) cold spray coatings, compared to reference polycrystalline tantalum and tungsten materials, has been evaluated using the thermal desorption spectrometry technique. Tantalum coatings, deposited via cold spray technology on 316L stainless steel substrates, are proposed as plasma-facing material surfaces with hydrogen gettering functionality for advanced fusion concepts. The materials were exposed to 95 eV D ions at a flux of 1.6–
D m−2 s−1. Retention was measured as a function of incident ion fluence and surface temperature. The results highlight an increased deuterium inventory in Ta cold spray coatings by a factor of 3.5 compared to polycrystalline tantalum and by two orders of magnitude compared to polycrystalline tungsten. A tendency for retention saturation in tantalum is observed at a fluence above
D m−2. While deuterium retention gradually decreases with increasing surface temperature from 400 K to 925 K for polycrystalline tungsten, it remains constant for polycrystalline tantalum. In contrast, retention in Ta coatings significantly decreases when the surface temperature exceeds 750 K. The microstructure of the cold spray Ta coatings plays a crucial role in the dynamics of deuterium trapping and release. Tantalum also exhibits a superior resistance to blister formation compared to tungsten when subjected to a high dose of deuterium.
076043
The following article is Open access
Runze Chen, Hyun-Tae Kim, Wenbin Liu, Jinping Qian, Bin Zhang, Ximan Li, Zhengping Luo, Dalong Chen, Yaowei Yu, Wei Gao et al
This paper validates for the first time the predictive capability of the DYON code for plasma initiation in EAST, which has metallic wall, superconducting coils and conventional tokamak shape, like ITER. The model accurately reproduced the operating spaces of loop voltage and prefill gas pressure for ohmic discharges, demonstrating its validity in predicting the required operating parameters for successful inductive plasma initiation in EAST. The role of wall conditioning on plasma initiation was investigated with the newly developed physical sputtering models of Boron and Lithium. In EAST experiments, it was observed that the discharges after boronisation of the wall are much more vulnerable to plasma burn-through failure than after lithium-coating. The simulation results revealed that despite the similar physical sputtering yield in Boron and Lithium, the radiative energy loss rates for the boron-coated wall are significantly higher than those for the lithium-coated wall, due to the much higher radiative power coefficients of Boron. Parametric scans of initial Boron content in ohmic discharge at the typical prefilled gas pressure in EAST (0.8 mPa) showed that even 1.5% of Boron content in the prefilled gas, possibly remaining after boronisation of the wall, could lead to excessive radiation energy losses and failure of plasma burn-through. For successful plasma burn-through with 1.5% initial boron content, the modelling indicates 10 kW absorption of EC power is required, and it increases with more initial boron e.g. 50 kW for 3% initial boron content.
076044
The following article is Open access
J. Varela, J. Garcia, S. Mazzi, Y. Kazakov, Z. Stancar, M. Baruzzo, J. Ongena, D.A. Spong, L. Garcia, Y. Ghai et al
The plasma in future nuclear fusion reactors will be heated by neutral beam injectors (NBIs) and high frequency electromagnetic waves as well as fusion born alpha particles. Energetic particles (EPs), with energies up to two orders of magnitude larger than the thermal plasma, can trigger EP driven modes and induce harmful EP losses, reducing the plasma heating efficiency and the economical viability of the reactor. The present study is dedicated to analyze the Alfven Eigenmode (AE) activity in JET D–T discharges, the closest experiment to reactor-like operation performed until now. There, EP driven modes are induced by the combined effect of tangential NBIs and ion cyclotron resonance heating (ICRH) driven EP. Linear and nonlinear simulations are performed with the gyro-fluid FAR3d code to analyze the AE activity observed in the discharge 99896. The linear simulations reproduce the unstable n = 3 to 5 toroidal AEs (TAE) at the inner plasma region observed in the experiment, triggered by highly energetic passing deuterium populations injected by the tangential NBIs, further accelerated by the effect of the ICRH up to 1 MeV. In addition, fish-bones triggered by energetic trapped hydrogen induced by the ICRH are also reproduced. On the other hand, the alpha particles density is too small to destabilize AEs in the experiment. Nonetheless, increasing artificially the alpha density by one order of magnitude, an n = 1 beta induced AE can be destabilized in the inner plasma region. Nonlinear simulations indicate the generation of zonal structures during the AE/fish-bone saturation phase. TAE and fish-bones causes a rather weak increase of the passing D and trapped H EP (around 2%), respectively. Shear flows and zonal currents are generated during the saturation of TAE and fish-bones. Nonlinear simulations performed for D–T and pure deuterium thermal plasma indicate AE/fish-bone activity is weaker and shear flows are less intense in the pure deuterium case, trends consistent with the experimental observations that also indicates a deterioration of the thermal plasma confinement. Therefore, both numerical studies and experimental evidence indicate the generation of shear flows by AE/fish-bones could be connected with an improvement of the thermal plasma confinement.
Corrigendum
079501
The following article is Open access
Alan A. Kaptanoglu, Alexander Wiedman, Jacob Halpern, Siena Hurwitz, Elizabeth J. Paul and Matt Landreman
This Corrigendum corrects and clarifies several inaccuracies in section 1A in the original article (Kaptanoglu et al 2025 Nucl. Fusion65 046029).
079502
The following article is Open access
R.T. Osawa, D. Moulton, S.L. Newton, S. Henderson, B. Lipschultz and A. Hudoba