Batteries and Energy Storage
A29
Feng Wu, Shengxian Wu, Renjie Chen, Junzheng Chen and Shi Chen
A composite of sulfur powder coated with conductive polythiophene was prepared via in situ chemical oxidative polymerization of thiophene with chloroform as the solvent and iron chloride as the oxidant. There was no chemical reaction between sulfur and polythiophene, and the composite cathode showed typical Li/S cell electrochemical reactions. The initial discharge capacity of the active materials was
sulfur and the remaining capacity was
sulfur after 50 cycles. The conductive polythiophene functioned in the electrode as a conducting additive and as a porous adsorbent, and effectively improved dischargeability and cyclability of the lithium/sulfur battery.
A32
R. Sharabi, E. Markevich, V. Borgel, G. Salitra, D. Aurbach, Guenter Semrau and Michael A. Schmidt
A36
Biao Zhang, Hongda Du, Baohua Li and Feiyu Kang
A39
Zonghai Chen, Jun Liu, A. N. Jansen, G. GirishKumar, Bill Casteel and K. Amine
Redox shuttle is a promising mechanism for intrinsic overcharge protection in lithium-ion cells and batteries. Two lithium borate cluster salts are reported to function as both the main salt for a nonaqueous electrolyte and the redox shuttle for overcharge protection. Lithium borate cluster salts with a tunable redox potential are promising candidates for overcharge protection for most positive electrodes in state-of-the-art lithium-ion cells.
A43
T. N. Ramesh, Kyu Tae Lee, B. L. Ellis and L. F. Nazar
A48
Wu Xu, Jie Xiao, Deyu Wang, Jian Zhang and Ji-Guang Zhang
Crown ethers can significantly affect the discharge performance of nonaqueous electrolytes in Li/air batteries. A small amount (
) of crown ethers reduces battery performance, and a minimum discharge capacity appears at ca. 5 wt % of crown ether in the electrolytes. When the content increases to 15 wt %, both 12-crown-4 and 15-crown-5 improve the capacity of Li/air cells by about 28% and 16%, respectively. The 15-crown-5-based electrolytes even show a maximum discharge capacity in the crown ether content range of 10–15 wt %. However, increasing the amount of 18-crown-6 in the electrolytes continuously lowers the cell performance.
A52
M. Aoki, K. Tadanaga and M. Tatsumisago
An all-solid-state electric double-layer capacitor was fabricated with an inorganic–organic hybrid membrane from 3-glycidoxypropyltrimethoxysilane, tetraethoxysilane, and orthophosphoric acid as an electrolyte, and activated carbon fiber cloth as polarized electrodes. The electrochemical properties of the capacitor were studied in a temperature range from room temperature to
. The specific capacitance of the capacitor was 41 F/g at
with 12% relative humidity, and the capacitor showed good cycle performance.
Fuel Cells and Energy Conversion
B33
Ke-Di Cai, Ge-Ping Yin, Qin-Zhi Lai and Peng Liu
In this study, we investigated a stack of direct dimethyl ether fuel cell (DDFC). A small passive DDFC stack had been developed, and a good uniformity could be observed from all single cells. The open-circuit voltage (OCV) of the stack was around 4 V, and its maximum power was 300 mW. No matter which means was adopted, only the values of current and voltage can be changed. The total output power of the stack remains the same. Therefore, based on the different requirements of electrical appliances on discharge, different ways of electric connection can be adopted for the stack.
B36
Rhys Forgie, Greg Bugosh, K. C. Neyerlin, Zengcai Liu and Peter Strasser
We have explored bimetallic Ru–M oxygen evolution reaction (OER) electrocatalysts for use in water splitting in acidic electrolytes. Using an electrochemical multielectrode cell, we investigated the OER activity of selected compositions of seven binary alloy systems, Ru–M
. Benchmarked using pure Ru electrocatalysts, Ru–Co, Ru–Ir, and Ru–Cu exhibited improved Ru mass-based catalytic activities. Structural studies of the precursor alloys indicated the presence of hexagonal and cubic mixed metal phases. We hypothesize that the secondary metal component modulates the chemisorption energy of oxygen, which was suggested to be a sensitive rate controlling parameter in the OER catalysis and favors the formation of atomic oxygen
and possibly
species rather than
species on the oxide catalyst.
B40
Seung Hee Hong, Madakashira P. Phaniraj, Dong-Ik Kim, Jae-Pyoung Ahn, Young Whan Cho, Seung Hee Han and Heung Nam Han
The oxidation characteristics of ferritic stainless steel (Crofer22APU), a potential candidate for interconnects in solid oxide fuel cells, were studied. Carbon was introduced on the surface by ion implantation, and both the carbon-implanted and unimplanted samples were subjected to oxidation at
for 500 h. Ion implantation produced a carbon-rich amorphous region at the top surface. Fast diffusion induced by ion implantation promoted the formation of spinel oxides. The carbon-implanted samples showed significantly less mass gain than the unimplanted samples.
B43
Jae-ha Myung, Jong-Jin Lee and Sang-Hoon Hyun
Corrosion, Passivation, and Anodic Films
C5
Min Yang, Nabeen K. Shrestha, Robert Hahn and Patrik Schmuki
We report on hexagonal-phase bismuth phosphate nanorods that can be formed on bismuth substrates by anodization in fluoride-containing concentrated phosphoric acid electrolyte. Under optimized conditions,
layers can be formed that consist of rods with a diameter of 50–70 nm and a length of 250 nm. These nanorods are characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and photoluminescence measurements. The results confirm the presence of
nanorods that show a high photoluminescence in the visible range of the spectrum, peaking at a wavelength of 440 nm.
C9
Tatsuro Fukushima, Kazuyuki Nishio and Hideki Masuda
High resolution inkjet printing was applied to the site control of the anodic tunnel etching of Al. In this method, a dot array of polymer resin was formed on Al(100) by inkjet printing and was transferred to the oxide layer by anodization. The anodic etching of Al with a mask in a HCl electrolyte resulted in the site-controlled initiation of the tunnel etching of Al and the uniform tunnel pits with high aspect ratio. The interval of the tunnel pits could be successfully controlled by the inkjet patterning on the micrometer scales.
Electrochemical Synthesis and Engineering
E5
Zoran Mandić, Marina Ilijaš and Gordana Turkalj
The electrochemical reduction of 8-methylene-oleandomycin was investigated by cyclic voltammetry and preparative scale electrolysis. The electrochemical reduction in the exocyclic double bond predominantly gives one epimer with the estimated diastereomeric ratio of 5:1.
-methyl-oleandomycin was identified as the main product of the reaction. Stereoselectivity of the electroreduction was explained by the “bottom-side” adsorption of the 8-methylene-oleandomycin through its conjugated double bond to the electrode surface.
Semiconductor Devices, Materials, and Processing
H95
Fu-Yen Jian, Ting-Chang Chang, An-Kuo Chu, Te-Chih Chen, Shih-Ching Chen, Chia-Sheng Lin, Hung-Wei Li, Ming-Hsien Lee, Jim-Shone Chen and Ching-Chieh Shih
H98
Wan Ho Lee, Dong Ho Kim, Dong Ju Chae, Ji Won Yang, Jae In Sim, Yun Mo Sung and Tae Geun Kim
H101
Mamoru Furuta, Takashi Nakanishi, Mutsumi Kimura, Takahiro Hiramatsu, Tokiyoshi Matsuda, Hiroshi Furuta, Toshiyuki Kawaharamura, Chaoyang Li and Takashi Hirao
H105
Chang Seo Park, Gennadi Bersuker, P. Y. Hung, Paul D. Kirsch and Raj Jammy
A mechanism of effective work function change of the Ru oxide metal gate under various anneal conditions has been studied. High temperature annealing was found to result in changing the tetragonal phase of
to the hexagonal phase characteristic for Ru metal. By extracting the electrode–dielectric band offset magnitude, it was confirmed that such a change in the stoichiometry of Ru oxide leads to the lower effective work function values of the postanneal Ru oxide/high-
gate stacks. The low temperature oxygen anneal treatment of the high temperature annealed Ru oxide electrode stacks recovers the high work function value by supplying oxygen into the decomposed Ru oxide.
H108
Lung-Chien Chen and Bo-Hong Liu
We presented a hybrid solar cell with a zinc phthalocyanine (ZnPc)/gold nanoparticles (GNPs)/ultrathin silicon dioxide
/porous silicon (PS) structure. The PS structure was prepared using anodic aluminum oxide. The process was optimized, and the structure was employed as a mask to produce another porous structure at the surface of a silicon substrate by plasma etching. Subsequently, the silicon substrate with the porous structure was immersed in a solution of GNPs for 24 h to deposit GNPs onto the
layer, and a ZnPc film was finally formed by spin coating on the silicon substrate with the porous structure.
H112
C. H. Cheng, H. H. Hsu, I. J. Hsieh, C. K. Deng, Albert Chin and F. S. Yeh
H116
Hock Jin Quah, Kuan Yew Cheong, Zainuriah Hassan and Zainovia Lockman
H119
Xiaomin Wei, Yasa Adi Sampurno, Yun Zhuang, Roy Dittler, Anand Meled, Jiang Cheng, Christopher Wargo, Ralph Stankowski and Ara Philipossian
This article studied the effect of retaining ring slot designs on the slurry film thickness within the pad–wafer interface during chemical mechanical planarization (CMP). Two retaining rings, with “standard” and “alternative” slot designs, were tested. Slurry film thickness within the pad–wafer interface was measured during polishing using dual emission UV-enhanced fluorescence. Results showed that slurry flow rate, pressure, and pad–wafer rotational rate had impacts on the slurry film thickness. Under the same polishing condition, the ring with the “alternative” slot design generated, on average, 30% thicker slurry film compared with the ring with the “standard” slot design.
H122
Hak Hyung Lee, Gi Cheol Hong, Bong Jun Kim, Karthikeyan Giri Sadasivam, June Key Lee, Sang-Wan Ryu, Sung Jin Son, Kwang-Woo Kwon and Young-Ho Kim
H125
Joon-Woo Jeon, Seong-Han Park, Se-Yeon Jung, Jihyung Moon, June-O Song, Gon Namgoong and Tae-Yeon Seong
We have investigated the electrical properties of V (20 nm)/Ti (60 nm)/Au (20 nm) contacts to Ga- and N-polar n-GaN. Regardless of the crystal polarities, all the samples exhibit similar electrical characteristics. The as-deposited samples are ohmic. However, they become nonohmic when annealed at
. The samples are ohmic again at
. Based on the X-ray photoemission spectroscopy and Auger electron spectroscopy results, the ohmic and degradation behaviors are explained in terms of the formation of donorlike surface defects and Ga vacancies, which are generated by dry etching, the out-diffusion of Ga, and the formation of nitride phases.
H128
Ying Wang, Fei Cao, Mi-lin Zhang, Lei Shao and Xi-chuan Li
H131
Hyunsoo Kim and Kwang-Soon Ahn
We report on the enhanced light extraction of GaN-based light emitting diodes (LEDs) fabricated with deeply etched mesa holes. To maximize the extraction of trapped light, the geometry of mesa holes, which act as lateral exits in guided mode, could be optimized based on Snell’s law. The LED fabricated with deeply etched mesa holes showed 27% enhancement in output power when compared to a reference LED. This result agreed with optical ray-tracing calculations.
H134
Yong-Mu Kim, Young-Su Park, Andrew O’Reilly and Jang-Sik Lee
H137
Hojoong Kim, Ji Chul Yang and Taesung Kim
This article introduces an abrasive particle size measurement by a scanning mobility particle sizer (SMPS) to measure precise size distribution in the nanoregime. Static light scattering (SLS), which is a conventional method, is compared with the SMPS-based technique. Both measurement techniques differ in the measurement of
and
abrasive particle sizes. Results showed that SMPS is more sensitive than the SLS equipment due to a single-particle count, which is suitable for representing nanoparticle abrasives. To the best of our knowledge, there has been no article yet about the use of an SMPS for the measurement of abrasive size in chemical mechanical planarization (CMP) technology.
Sensors and Displays: Principles, Materials, and Processing
J25
K. Mukherjee and S. B. Majumder
The conductance transients for zinc ferrite gas sensors are analyzed using Langmuir adsorption kinetics. For carbon monoxide and hydrogen gas sensing using zinc ferrite, it is revealed that the heat of adsorption, gas concentration dependence of the response time constants, and the activation energies for adsorption/desorption differ significantly. It has been argued that each gas, depending on its reactivity, molecular size, etc., has characteristic activation energies of adsorption and desorption. Analyses of response and recovery kinetics of a single sensing element, therefore, is beneficial in differentiating different gases.
J28
Chongfeng Guo, Lin Luan, Liang Shi and Hyo Jin Seo
J32
D. Jia, L. A. Lewis and Xiao-jun Wang
J35
Jia Zhang and Yuhua Wang
Nanostructured Materials, Carbon Nanotubes, and Fullerenes
K29
H. T. Hsueh, T. J. Hsueh, S. J. Chang, F. Y. Hung, C. L. Hsu, W. Y. Weng, C. W. Liu, Y. H. Lee and B. T. Dai
High density silicon nanowires (SiNWs) were selectively grown on a Cr/glass template with a very thin 5 nm thick a-Si:H layer at
by a vapor–liquid–solid process using Au–Si nanoparticles as catalysts. SiNWs cannot be grown without the a-Si:H layer. Field emitters using these SiNWs were also fabricated. The threshold field of the fabricated field emitters was
. Furthermore, the field enhancement factor, β, of the fabricated SiNW field emitter was around 1700.
K32
G. Ko, H.-Y. Kim, F. Ren, S. J. Pearton and J. Kim
K35
Marta E. Plonska-Brzezinska, Amit Palkar, Krzysztof Winkler and Luis Echegoyen
Interdisciplinary Topics
P7
U. López-García, Carlos Frontana, J. Manríquez and Luis A. Godínez
In this work, results on a preliminary study of the influence of surface confined poly(amidoamine) (PAMAM) dendrimers (DMs) in the electrochromic properties of iron hexacyanoferrate [Prussian blue, (PB)] films, are presented. The results show that the DM-modified surfaces promote not only larger PB surface coverage values but also a significant increase in the electrochromic efficiency when compared to surfaces constructed in the absence of PAMAM DMs. A complementary electrochemical study also showed that the underlying DM structure induces chemical proportions of
in the PB film that are closer to those expected for the perfectly structured PB species.
Miscellaneous
S3
Seok-Jun Won, Sungin Suh, Sang Woon Lee, Gyu-Jin Choi, Cheol Seong Hwang and Hyeong Joon Kim