Batteries and Energy Storage
A95
Xiong Zhang, Wensheng Yang and Yanwei Ma
A99
Ciptanti Sisbandini, Daniel Brandell, Torbjörn Gustafsson and John O. Thomas
A102
Haiyan Chen, Philippe Poizot, Franck Dolhem, Nor Irwin Basir, Olivier Mentré and Jean-Marie Tarascon
A107
S. Komaba, K. Okushi, T. Ozeki, H. Yui, Y. Katayama, T. Miura, T. Saito and H. Groult
Polyacrylates were applied as a binder of graphite electrode in a lithium-ion cell to modify the interface. Compared to a conventional binder, poly(vinylidene fluoride), the efficiency at the initial cycle was improved by poly(acrylic acid) and alkali polyacrylates in an ethylene carbonate (EC)-based electrolyte with highly reversible lithium intercalation. In a
propylene carbonate (PC) solution, the poly(vinylidene fluoride) electrode showed a huge irreversible capacity as is generally known. However, the polyacrylate-modified graphite demonstrated highly reversible lithium intercalation in the PC electrolyte containing no film-forming additives as well as in the EC electrolyte due to the interfacial modification with polyacrylates.
Fuel Cells and Energy Conversion
B61
Pei He, Huihui Wang, Shenggui Liu, Jianxin Shi, Gang Wang and Menglian Gong
A dinuclear Eu(III) organic complex,
, was synthesized, where BTFBDEC is 3,6-bis(4,4,4-trifluoro-1,3-butyldiketone)-9-ethyl-carbazole and phen is 1,10-phenanthroline.
exhibits high thermal stability, excellent photoluminescence properties, appropriate CIE chromaticity coordinates for red and good quantum yield under near-UV light excitation. An intense red-emitting light-emitting diode (LED) was fabricated by combining
with an
emitting InGaN chip. The results indicate that
is a good candidate as a red component for the fabrication of white LEDs.
B65
Jong Hoon Joo, Dong Young Kim and Gyeong Man Choi
B69
Reiichi Chiba, Takeshi Komatsu, Himeko Orui, Hiroaki Taguchi, Kazuhiko Nozawa and Hajime Arai
B73
Yi Wang, Shuangyin Wang and Xin Wang
B77
J. M. Fisher, N. Cabello-Moreno, E. Christian and D. Thompsett
A carbon-supported PdRu (1:1) alloy was prepared by reduction of a supported mixed metal oxide precursor. The alloy phase was found to segregate on heating to Ru-rich and pure Pd phases. The single-phase alloy was evaluated for methanol oxidation in a membrane electrode assembly half-cell configuration, along with pure Pd, Ru, and benchmark PtRu catalysts. The mass activity of the PdRu was found to be at least an order of magnitude less than the PtRu catalyst. The cycle stability of the PdRu was assessed and found to be superior to pure Pd.
B82
G. J. la O’ and Y. Shao-Horn
B86
Jess Wheldon, Woo-Jin Lee, Dong-Ha Lim, Anders B. Broste, Matthew Bollinger and William H. Smyrl
Electrochemical/Chemical Deposition and Etching
D33
Serdar Aksu, Jiaxiong Wang and Bulent M. Basol
An approach was developed for electrochemical codeposition of In–Se and Ga–Se films with high repeatability and controllable
and
molar ratios to prepare precursor layers for copper indium gallium diselenide (CIGS) film formation by two-stage processes. Full potential of complexation was used for the first time by using aqueous electroplating solutions containing complexing agents at alkaline regime. It was found that tartrate and citrate were suitable complexing agents to solubilize In and Ga ions at high pH, respectively. Because no appreciable complexation of Se occurred, Se reduction potential could be independently controlled by the amount of dissolved Se. Use of alkaline solutions also reduced hydrogen bubble generation and related defects.
D36
Lucas B. Henderson and John G. Ekerdt
D39
O. Lühn, A. Radisic, P. M. Vereecken, C. Van Hoof, W. Ruythooren and J.-P. Celis
Blind holes
diam and
in depth were filled with electrodeposited copper. Before electrodeposition, the blind holes were fully metallized with a copper seed layer or with a thin sputtered Ta layer deposited on top of the copper seed layer. Filling of partially Ta-capped features was three times faster than filling fully metallized features. For fully metallized features, the growth mode for copper electrodeposition is dominated by diffusion adsorption of a leveling agent. For partially Ta-capped surfaces, the growth mode was modified to differential acceleration through accumulation of an accelerating species at the bottom of features.
D42
Takeshi Kondo, Yutaka Sawada, Hiroshi. Funakubo, Kensuke Akiyama, Takanori Kiguchi, Meihan Wang and Takayuki Uchida
D45
J. H. Lee, J. Y. Son, Han-Bo-Ram Lee, Heung-Soon Lee, D.-J. Ma, C.-S. Lee and Hyungjun Kim
Electrochemical Synthesis and Engineering
E5
Masaya Chigane, Mitsuru Watanabe, Masanobu Izaki, Ippei Yamaguchi and Tsutomu Shinagawa
Dielectric Science and Materials
G17
S. Van Elshocht, C. Adelmann, P. Lehnen and S. De Gendt
G20
J. Y. Son and Y.-H. Shin
G23
Hyun-Woo Lee, Won-Jae Lee and Soon-Gil Yoon
Semiconductor Devices, Materials, and Processing
H161
M. Singh, Y. Yang, C. G. Takoudis, A. Tatarenko, G. Srinivasan, P. Kharel and G. Lawes
H165
M. S. Rahman, E. K. Evangelou, I. I. Androulidakis and A. Dimoulas
H169
Han-Ki Kim, Jin-A Jeong, Kwang-Hyuk Choi, Soon-Wook Jeong and Jae-Wook Kang
H173
Hong-Yeol Kim, Fan Ren, S. J. Pearton and Jihyun Kim
H176
M. Rabold, D. Busch, F. Goldschmidtboeing and P. Woias
This article presents an on-wafer implementable test method for a surface-energy characterization of full-wafer bonds. The test is based on a modification of the common destructive blister test where, in addition, a “sacrificial bond” is implemented. During the test, an internal crack is generated at the “sacrificial bond” only. An analytical model was set up and numerical simulations were carried out to enhance the model for small structures with large thickness-to-length ratios. The test handling was automated to be used within bulk fabrication. Finally, different samples were characterized and the result was compared to the established double cantilever beam-test method.
H179
Da-jian Wang and Ling-yun Liu
H182
D. M. Martin, U. Smith, V. Yantchev, I. Katardjiev and J. Olsson
The use of thick NiSi electrodes in electroacoustic resonators allows front-end integration with integrated circuit technology. Problems are identified in the formation of thick nickel silicide (NiSi) electrodes via a single deposition of Ni onto blank Si wafers. An alternative fabrication process based on the deposition and silicidation of a multilayer film is presented. The films were found to have low resistivity and smooth surfaces, with the layered structure preserved even after silicidation. Textured piezoelectric films of (002) wurtzite AlN demonstrated a diffraction-peak width that narrows to 3.5° when deposited on a thick 10 pair NiSi film.
H185
Ja-Yeon Kim, Min-Ki Kwon, Seong-Ju Park, Sunwoon Kim, Je Won Kim and Yong Chun Kim
H188
F. J. Lugo, H. S. Kim, S. J. Pearton, C. R. Abernathy, B. P. Gila, D. P. Norton, Y. L. Wang and F. Ren
Sensors and Displays: Principles, Materials, and Processing
J51
Wen-Jen Chiang, Chrong-Jung Lin and Ya-Chin King
An embedded photosensor using a gate-body-tied (GBT) thin-film transistor is investigated on a low-temperature poly-silicon display panel. The GBT photosensor is formed by connection of the floating gate and body in a metal-oxide-semiconductor field-effect transistor (MOSFET). The intrinsic body region without gate metal on top is the photosensing area where the photogenerated electron-hole pairs are excited and separated. The GBT structure leads to photogenerated carrier accumulation on the floating gate and results in positive feedback of gate potential and increase of MOSFET current. Thus, the photocurrent is amplified. The photoresponse is enhanced to two to three times that of the conventional p-i-n photodiode.
Nanostructured Materials, Carbon Nanotubes, and Fullerenes
K33
A. Podhorodecki, M. Nyk, G. Zatryb, J. Misiewicz and W. Strek
K37
X. Wang, K. L. Pey, W. K. Choi, C. K.F. Ho, E. Fitzgerald and D. Antoniadis
Arrayed
nanowires and their heterostructures have been formed using Au-assisted wet chemical etching combined with nanosphere lithography. Because the nanowires are formed from the as-grown films, the chemical compositions and the heterostructures along the growth direction of the formed nanowires, i.e., axial heterostructures, are replicas of that of the grown layered films. The diameter and the lateral arrangement of the nanowires are defined by the lithography method. Si and its Ge alloy nanowires and one-dimensional heterostructures formed using this method may have great potential for vertical logic, photovoltaic, and memory-device applications.