Letter
24LT01
Ju Won Jeon, Yongwoo Lee, Geon-Hwi Park, Dae Hwan Kim, Dong Myong Kim, Min-Ho Kang and Sung-Jin Choi
Carbon nanotubes (CNTs) are one-dimensional materials that have been proposed to replace silicon semiconductors and have been actively studied due to their high carrier mobility, high current density, and high mechanical flexibility. Specifically, highly purified, pre-separated, and solution-processed semiconducting CNTs are suitable for mass production. These CNTs have advantages, such as room-temperature processing compatibility, while enabling a fast and straightforward manufacturing process. In this paper, CNT network transistors were fabricated on a total of five 8 inch wafers by reusing a highly purified and pre-separated 99% semiconductor-enriched CNT solution. The results confirmed that the density of semiconducting CNTs deposited on the five selected wafers was notably uniform, even though the CNT solution was reused up to four times after the initial CNT deposition. Moreover, there was no significant degradation in the key CNT network transistor metrics. Therefore, we believe that our findings regarding this CNT reuse method may provide additional guidance in the field of wafer-scale CNT electronics and may contribute strongly to the development of practical device applications at an ultralow cost.
Topical Review
242001
Emine Ayşe Turhan, Ahmet Engin Pazarçeviren, Zafer Evis and Ayşen Tezcaner
Nanomaterials have received increasing attention due to their controllable physical and chemical properties and their improved performance over their bulk structures during the last years. Carbon nanostructures are one of the most widely searched materials for use in different applications ranging from electronic to biomedical because of their exceptional physical and chemical properties. However, BN nanostructures surpassed the attention of the carbon-based nanostructure because of their enhanced thermal and chemical stabilities in addition to structural similarity with the carbon nanomaterials. Among these nanostructures, one dimensional-BN nanostructures are on the verge of development as new materials to fulfill some necessities for different application areas based on their excellent and unique properties including their tunable surface and bandgap, electronic, optical, mechanical, thermal, and chemical stability. Synthesis of high-quality boron nitride nanotubes (BNNTs) in large quantities with novel techniques provided greater access, and increased their potential use in nanocomposites, biomedical fields, and nanodevices as well as hydrogen uptake applications. In this review, properties and applications of one-dimensional BN (1D) nanotubes, nanofibers, and nanorods in hydrogen uptake, biomedical field, and nanodevices are discussed in depth. Additionally, research on native and modified forms of BNNTs and also their composites with different materials to further improve electronic, optical, structural, mechanical, chemical, and biological properties are also reviewed. BNNTs find many applications in different areas, however, they still need to be further studied for improving the synthesis methods and finding new possible future applications.
Papers
Quantum phenomena and technology
245001
Tong-Biao Wang, Ying Zhou, Hong-Qian Mu, Khurram Shehzad, De-Jian Zhang, Wen-Xing Liu, Tian-Bao Yu and Qing-Hua Liao
Enhancement of weak Casimir forces is extremely important for their practical detection and subsequent applications in variety of scientific and technological fields. We study the lateral Casimir forces acting on the rotating particles with small radius of 50 nm as well as that with large radius of 500 nm near the hyperbolic metamaterial made of silicon carbide (SiC) nanowires. It is found that the lateral Casimir force acting on the small particle of 50 nm near hyperbolic metamaterial with appropriate filling fraction can be enhanced nearly four times comparing with that acting on the same particle near SiC bulk in the previous study. Such enhancement is caused by the coupling between the resonance mode excited by nanoparticle and the hyperbolic mode supported by hyperbolic metamaterial. The results obtained in this study provide an efficient method to enhance the interaction of nanoscale objects.
Electronics and photonics
245201
The following article is Open access
M G Bartmann, M Sistani, N Luhmann, S Schmid, E Bertagnolli, A Lugstein and J Smoliner
Near-infrared detection is widely used for nondestructive and non-contact inspections in various areas, including thermography, environmental and chemical analysis as well as food and medical diagnoses. Common room temperature bolometer-type infrared sensors are based on architectures in the μm range, limiting miniaturization for future highly integrated ‘More than Moore’ concepts. In this work, we present a first principle study on a highly scalable and CMOS compatible bolometer-type detector utilizing Ge nanowires as the thermal sensitive element. For this approach, we implemented the Ge nanowires on top of a low thermal conducting and highly absorptive membrane as a near infrared (IR) sensor element. We adopted a freestanding membrane coated with an impedance matched platinum absorber demonstrating wavelength independent absorptivity of 50% in the near to mid IR regime. The electrical characteristics of the device were measured depending on temperature and biasing conditions. A strong dependence of the resistance on the temperature was shown with a maximum temperature coefficient of resistance of −0.07 K−1 at T = 100 K. Heat transport simulations using COMSOL were used to optimize the responsivity and temporal response, which are in good agreement with the experimental results. Further, lock-in measurements were used to benchmark the bolometer device at room temperature with respect to detectivity and noise equivalent power. Finally, we demonstrated that by operating the bolometer with a network of parallel nanowires, both detectivity and noise equivalent power can be effectively improved.
245202
Tae Sung Lee and Changhwan Choi
A memristor is defined as a non-volatile memory switching two-terminal resistor, and a memristor with digital switching characteristics is widely studied as a next-generation non-volatile memory because of its simple structure, high integration density, and low power consumption. Recently, analog memristors with gradual resistance switching (RS) characteristics have garnered great attention because of their potential to implement artificial synapses that can emulate the brain functions. Transition metal oxides are thought to be strong candidate materials for the RS. In particular, tantalum oxide (TaOx)-based memristive devices provide stable and durable switching characteristics. TaOx-based memristors utilize analog switching characteristics and have excellent durability and reliability, so they can be applied as artificial synaptic device. In this study, the characteristics of analog RS using Ta2O5-based memristive devices were investigated. The current level of the Pt/Ta2O5/Pt memristors was improved by adjusting the thickness of Ta2O5. In particular, when an indium-tin-oxide (ITO) buffer layer was added to Ta2O5 forming a Pt/ITO/Ta2O5/Pt heterostructured double-layer device, it showed more symmetrical potentiation and depression characteristics under both polarities than a single-layer device without ITO layer. The symmetrical and linear potentiation and depression characteristics are essential for the development of efficient memristor-based neuromorphic systems. Insertion of the ITO buffer layer improves linearity, symmetry, and stability of the analog RS properties of Ta2O5-based memristors to artificial synapses.
245203
Denice N Feria, Feng-Hsuan Hsu, Yi-Chieh Chan, Bo-Rui Chen, Chang-Jer Wu and Tai-Yuan Lin
The use of conventional fabrication methods rapidly developed the performance and notable enhancements of optoelectronic devices. However, it proved challenging to develop and demonstrate stable optoelectronic devices with biodegradability and biocompatibility properties towards sustainable development and extensive applications. This study incorporates a water-soluble Cr-phycoerythrin (Cr-PE) biomaterial to observe its optical and electronic properties effects on the pristine indium gallium zinc oxide (IGZO)-based photodetector. The fabricated photodetector demonstrates an extended absorption detection region, enhanced optoelectronic performance, and switchable function properties. The resulting photocurrent and responsivity of the IGZO/Cr-PE structure have increased by 5.7 and 7.1 times as compared to the pristine IGZO photodetector. It was also observed that the photodetector could operate in UV and UV–visible with enhanced optical properties by effectively adding the water-soluble Cr-PE. Also, the sensing region of IGZO photodetector becomes changeable. It exhibits switchable dual detection by alternatively dripping and removing the Cr-PE on the IGZO layer. Different measurement parameters such as detectivity, repeatability, and sensitivity are highlighted to effectively prove the advantage of including Cr-PE on the photodetector structure. This study contributes to understanding the potential functions in improving optoelectronic devices through an environmental-friendly method.
245204
Jian Biao Chen, Kai Zhang, Zi Jin Jiang, Li Ye Gao, Jiang Wen Xu, Jiang Tao Chen, Yun Zhao, Yan Li and Cheng Wei Wang
In electrochemical metallization memristor, the performance of resistive switching (RS) is influenced by the forming and fusing of conductive filaments within the dielectric layer. However, the growth of filaments, mostly, is unpredictable and uncontrollable. For this reason, to optimize ions migration paths in the dielectric layer itself in the Al/CuxS/Cu structure, uniform CuxS nanosheets films have been synthesized using anodization for various time spans. And the Al/CuxS/Cu devices show a low operating voltage of less than 0.3 V and stable RS performance. At the same time, a reversible negative differential resistance (NDR) behavior is also demonstrated. And then, the mechanism of repeatable coexistence of RS effect and NDR phenomenon is investigated exhaustively. Analyses suggest that the combined physical model of space-charge limited conduction mechanism and conductive filaments bias-induced migration of Cu ions within the CuxS dielectric layer is responsible for the RS operation, meanwhile, a Schottky barrier caused by copper vacancy at the CuxS/Cu interface is demonstrated to explain the NDR phenomenon. This work will develop a new way to optimize the performance of non-volatile memory with multiple physical attributes in the future.
245205
The following article is Open access
Shuo Zheng, Walter W Duley, Peng Peng and Norman Zhou
CuO nanomaterials are one of the metal-oxides that received extensive investigations in recent years due to their versatility for applications in high-performance nano-devices. Tailoring the device performance through the engineering of properties in the CuO nanomaterials thus attracted lots of effort. In this paper, we show that nanosecond (ns) laser irradiation is effective in improving the electrical and optoelectrical properties in the copper oxide nanowires (CuO NWs). We find that ns laser irradiation can achieve joining between CuO NWs and interdigital gold electrodes. Meanwhile, the concentration and type of point defects in CuO can be controlled by ns laser irradiation as well. An increase in the concentration of defect centers, together with a reduction in the potential energy barrier at the Au/CuO interfaces due to laser irradiation increases electrical conductivity and enhances photo-conductivity. We demonstrate that the enhanced electrical and photo-conductivity achieved through ns laser irradiation can be beneficial for applications such as resistive switching and photo-detection.
Patterning and nanofabrication
245301
Rongtao Cao, Ziyu Zhou, Sajad Haghanifar, Jingyu Wu, Ming-Jun Li, Susheng Tan, Paul W Leu and Kevin P Chen
This paper reports on the formation of moth-eye nanopillar structures on surfaces of alkali-aluminosilicate Gorilla glass substrates using a self-masking plasma etching method. Surface and cross-section chemical compositions studies were carried out to study the formation of the nanostructures. CFx induced polymers were shown to be the self-masking material during plasma etching. The nanostructures enhance transmission at wavelengths over 525 nm may be utilized for fluid-induced switchable haze. Additional functionalities associated with nanostructures may be realized such as self-cleaning, anti-fogging, and stain-resistance.
245302
The following article is Open access
Marta Nikić, Aleksandar Opančar, Florian Hartmann, Ludovico Migliaccio, Marie Jakešová, Eric Daniel Głowacki and Vedran Đerek
Optically driven electronic neuromodulation devices are a novel tool in basic research and offer new prospects in medical therapeutic applications. Optimal operation of such devices requires efficient light capture and charge generation, effective electrical communication across the device’s bioelectronic interface, conformal adhesion to the target tissue, and mechanical stability of the device during the lifetime of the implant—all of which can be tuned by spatial structuring of the device. We demonstrate a 3D structured opto-bioelectronic device—an organic electrolytic photocapacitor spatially designed by depositing the active device layers on an inverted micropyramid-shaped substrate. Ultrathin, transparent, and flexible micropyramid-shaped foil was fabricated by chemical vapour deposition of parylene C on silicon moulds containing arrays of inverted micropyramids, followed by a peel-off procedure. The capacitive current delivered by the devices showed a strong dependency on the underlying spatial structure. The device performance was evaluated by numerical modelling. We propose that the developed numerical model can be used as a basis for the design of future functional 3D design of opto-bioelectronic devices and electrodes.
Energy at the nanoscale
245401
Xin Liu, Chenyin Li, Fang Xu, Guohong Fan and Hong Xu
Ammonia (NH3) is an essential resource in human production and living activities, and its demand has been rising in recent years. The catalytic synthesis of NH3 from N2 under mild conditions, inspired by biological nitrogen fixation, has piqued the interest of researchers. In this paper, density functional theory (DFT) calculations were used to investigate the catalytic activity, mechanism, and selectivity of the TM embedded nitrogen-doped phosphorene as high-performance nitrogen reduction reaction (NRR) electrocatalysts in depth. The results show that Nb- and Mo-doped catalysts present excellent catalytic performance, with low limiting potentials of −0.41 and −0.18 V, respectively. The Mo–N3–BP catalyst, for example, not only has an extremely low overpotential (−0.02 V), but also presents superior selectivity to effectively inhibit the HER competition reaction. A deeper look into the catalytic mechanism reveals a volcano relationship between the d-band center and the catalytic activity (Mo and Nb are located near the peak of the volcano-type curve). The d-band center and charge of the metal center can be regarded as effective descriptors for NRR activity on TM embedded nitrogen-doped phosphorene electrocatalysts, which hope to serve as a guiding principle for the design of high performance NRR single-atom catalyst in the future.
245402
Lijian Li, Long Zhang, Chen Zhao, Yingtao Zhu and Yang Gao
In the present work, we investigated the geometric, electronic, and photocatalytic properties of g-C3N4 single-walled nanotube (SWCNNTs) and g-C3N4 double-walled nanotubes (DWCNNTs). The negative strain energy indicates that the SWCNNTs have a stable structure, while the most stable combination in the DWCNNT is (6, 0)@(12, 0). The energy band gaps of (n, 0) SWCNNTs increase while that of (n, n) SWCNNTs decrease as the diameter increase. Moreover, the calculated nanotubes have the ability of photocatalytic water splitting, and the valance band maximum of nanotubes are much lower than that of the monolayer, indicating that the nanotubes have better oxidation capacity than the monolayer. On the other hand, our calculations show that DWCNNTs have type II band alignment with a band gap width significantly smaller than that of SWCNNTs. Interestingly, DWCNNT exhibited a smaller effective mass of electrons than SWCNNTs, which is beneficial to electron migration. Therefore, the construction of nanotube is an effective way to improve the photocatalytic performance of g-C3N4 monolayer materials.
245403
Lingli Liu, Lei Yu, Lei Hu, Xianghe Meng, Sheng Liang, Jinlong Ge, Yun Wu and Chonghai Deng
Inferior electrical conductivity and large volume variation are two disadvantages of metal selenides. In this work, we have designed a core–shell structure of FeSe2@C composite with low cost using facile hydrothermal method. The FeSe2 particles as the ‘core’ and the carbon layer as the ‘shell’ displayed good synergistic effect that attributed to alleviate volume expansion of electrode and improving the electrical conductivity, which achieved the fast potassium storage. The core–shell structural FeSe2@C electrode achieved 286 mA h g−1 at 1 A g−1 over 1000 cycles with 99.8% coulombic efficiency and delivered excellent rate capacity with 273 mA h g−1 at 2 A g−1, which was ascribed to dispersed FeSe2 particles and the strong carbon shell coating. This work will provide the basis for the further development of the application of metal selenides in the field of flexible electrodes.
245404
Suyang Lu, Yunfan Shang, Wei Zheng, Yushuo Huang, Rui Wang, Wenwen Zeng, Haoran Zhan, Ye Yang and Jun Mei
With the increasing applications of Lithium-ion batteries in heavy equipment and engineering machinery, the requirements of rate capability are continuously growing. The high-rate performance of Li4Ti5O12 (LTO) needs to be further improved. In this paper, we synthesized LTO microsphere-TiO2(B) nanosheets (LTO-TOB) composite by using a solvothermal method and subsequent calcination. LTO-TOB composite combines the merits of TiO2(B) and LTO, resulting in excellent high-rate capability (144.8, 139.3 and 124.4 mAh g−1 at 20 C, 30 C and 50 C) and superior cycling stability (98.9% capability retention after 500 cycles at 5 C). Its excellent electrochemical properties root in the large surface area, high grain-boundary density and pseudocapacitive effect of LTO-TOB. This work reveals that LTO-TOB composite can be a potential anode for high power and energy density lithium-ion batteries.
245405
Guangyuan Yan, Tong Wu, Shuming Xing, Fei Chen, Biwei Zhao and Wenjing Gao
It is still highly desired to develop efficient, resource-abundant and inexpensive electrocatalysts to improve the sluggish kinetics of oxygen evolution reaction (OER) in electrochemical water splitting systems. In this work, the large-area ultrathin (2.52 nm thick) Ce-doped La2O3 nanofilms were developed via a facile and reliable ionic layer epitaxy method with different Ce content. The ultrathin Ce-doped La2O3 nanofilm with optimum composition of La1.22Ce0.78O3 exhibited an excellent OER performance with a very low overpotential of 221 mV at 10 mA cm−2 and a small Tafel slope of 33.7 mV dec−1. A remarkable high mass activity of 6263.2 A g−1 was also obtained from ultrathin La1.22Ce0.78O3 nanofilm at the overpotential of 221 mV. Such a high mass activity was three orders of magnitude higher than state-of-the-art commercial IrO2 powders (3.8 A g−1) and more than 30 times higher than La2O3 nanofilm (196.7 A g−1) without Ce doping at the same overpotential. This high mass activity was even significantly higher than other recently reported typical OER catalysts. The substantial OER performance gain by the Ce doping was attributed to the improved conductivity and electrochemical active surface areas of nanofilms as a result of favorable tuning on the charge transfer and electronic structures. This work provides a promising approach to develop high-performance two-dimensional (2D) electrocatalysts by effective heteroatom doping strategy.
245406
Yuanyuan Xia, Wang Hu, Yiyuan Yao, Shuhui Chen, Seongki Ahn, Tao Hang, Yunwen Wu and Ming Li
Since uncontrolled lithium (Li) dendrite growth and dendrite-induced dead Li severely limit the development of Li metal batteries, 3D Cu current collectors can effectively alleviate these problems during Li plating/stripping. Herein, one-step galvanostatic electrodeposition method is employed to fabricate a new current collector on Cu foam decorated with large-scale and uniform 3D porous Cu-based nanoflake (NF) structures (abbreviated as 3D Cu NF@Cu foam). This 3D structure with large internal surface areas not only generates lithophilic surface copper oxides and hydroxides as charge centers and nucleation sites for Li insertion/extraction, but also endows abundant space with interlinked NFs for buffering the cell volume expansion and increasing battery performance. As a result, Li-deposited 3D Cu NF@Cu foam current collector can realize stable cycling over 455 cycles with an average Coulombic efficiency of 98.8% at a current density of 1.0 mA cm−2, as well as a prolonged lifespan of >380 cycles in symmetrical cell without short-circuit, which are superior to those of blank Cu foam current collector. This work realizes Li metal anode stabilization by constructing 3D porous Cu NFs current collectors, which can advance the development of Li metal anode for battery industries.
Materials: synthesis or self-assembly
245601
Guangming Xu, Xilong Shen, Lei Zhang, Jie Tang, Chuan He, Ziqiang Zhou, Tian Xu, Meifeng Xu, Yonglong Jin and Chaonan Wang
In this study, we developed a flexible and transparent silver/polystyrene/polydimethylsiloxane (Ag/PS/PDMS) substrate with both high density of hot spots and satisfactory uniformity using a cost-effective approach. Via template-guided self-assembly, PS beads were arranged regularly in nanobowls of a square array on PDMS, whose surface structure was transferred from a commercial complementary metal oxide semiconductor chip. Roughness was introduced onto the PS bead surface by nitrogen plasma treatment, followed by sputtering of Ag which generated many hot spots. Differential roughness on the PS bead surface greatly influenced the morphology of the Ag/PS/PDMS substrate. A meat-ball like surface structure was formed with a plasma etching time of 5 min, whose growth mechanism was proposed based on the scanning electron microscope analysis. The high sensitivity and desirable uniformity of the meat-ball like Ag/PS/PDMS substrate were demonstrated by using crystal violet as a Raman reporter, exhibiting an enhancement factor of 2.7 × 107 and a relative standard deviation of 5.04%. Thiram of a lower concentration than the maximum residue limit on the cucumber surface could easily be detected in situ by the proposed substrate, demonstrating its great potential for in-situ food safety analysis.
245602
Ling Chang, Wei Feng, Yan Xia, Qvzi Jiang, Angang Dong and Yu Chen
Two-dimensional (2D) nanomaterials have received ever-increasing attention and in-depth exploration in multifarious fields on account of their superior mass transfer ability and abundant catalytic-active sites. Especially, the amorphous 2D nanomaterials feature unique properties distinct from atomic crystalline materials. However, the synthesis of high-quality and large-sized amorphous 2D nanomaterials encounters a big challenge. Here, a general and facile synthetic strategy for a series of 2D amorphous metal and nonmetallic oxides nanosheets, including SiO2, AlOOH, ZrO2 and TiO2 nanosheets, is reported. The versatile 2D amorphous nanomaterials are fabricated via manipulating the surface energy of relevant metal alkoxide precursors with liquid feature and controlling the related synthesis parameters to form solid 2D amorphous nanosheets by in situ hydrolysis and condensation of precursors. Density functional theory (DFT) calculations reveal the molecular adsorption mechanism of wetting process of precursor infiltrated on solid NaCl substrate, which attributes to the strong interaction between Na–O atom pairs from NaCl and metal alkoxides respectively. Furthermore, taking the 2D Fe–ZrO2 nanomaterials as the catalyst, the excellent catalytic performance for Rhodamine B (RhB) degradation illustrates that these 2D nanomaterials prepared by this method have the characteristics of easy functionalization. This work provides an efficient strategy for nanomaterials functionalization during 2D nanosheets synthetic process and further being applied in catalysis-related field and beyond.
245603
The following article is Open access
U H Hossain, G Jantsen, F Muench, U Kunz and W Ensinger
Ion-track etching represents a highly versatile way of introducing artificial pores with diameters down into the nm-regime into polymers, which offers considerable synthetic flexibility in template-assisted nanofabrication schemes. While the mechanistic foundations of ion-track technology are well understood, its potential for creating structurally and compositionally complex nano-architectures is far from being fully tapped. In this study, we showcase different strategies to expand the synthetic repertoire of ion-track membrane templating by creating several new 1D nanostructures, namely metal nanotubes of elliptical cross-section, funnel-shaped nanotubes optionally overcoated with titania or nickel nanospike layers, and concentrical as well as stacked metal nanotube-nanowire heterostructures. These nano-architectures are obtained solely by applying different wet-chemical deposition methods (electroless plating, electrodeposition, and chemical bath deposition) to ion-track etched polycarbonate templates, whose pore geometry is modified through plastic deformation, consecutive etching steps under differing conditions, and etching steps intermitted by spatially confined deposition, providing new motifs for nanoscale replication.
245604
Xianguo Ma, Zining Wang, Zhihao Wang, Mengqi Cui, Hui Wang, Jianwei Ren and Sina Karimzadeh
In this work, the density and electronic structures of the metal active sites in NiCo2O4 nanorod arrays were concurrently tuned by controlling the sample’s exposure time in a phosphorization process. The results showed that both the density and electronic structure of the active adsorption sites played a key role towards the catalytic activity for water splitting to produce hydrogen. The optimal catalyst exhibited 81 mV overpotential for hydrogen evolution reaction (HER) at 10 mA cm−2 and 313 mV overpotential towards oxygen evolution reaction at 50 mA cm−2. The assembled electrode delivered a current density of 50 mA cm−2 at 1.694 V in a fully functional water electrolyzer. The further results of theoretical density functional theory calculations revealed the doping of P elements lowered down the H adsorption energies involved in the water splitting process on the various active sites of P-NiCo2O4-10 catalyst, and thus enhanced its HER catalytic activities.
245605
Mohammed Zeghouane, Hadi Hijazi, Franck Bassani, Gauthier Lefevre, Eugenie Martinez, Thierry Luciani, Pascal Gentile, Vladimir G Dubrovskii and Bassem Salem
We report on the influence of the liquid droplet composition on the Sn incorporation in GeSn nanowires (NWs) grown by the vapor−liquid−solid (VLS) mechanism with different catalysts. The variation of the NW growth rate and morphology with the growth temperature is investigated and 400 °C is identified as the best temperature to grow the longest untapered NWs with a growth rate of 520 nm min−1. When GeSn NWs are grown with pure Au droplets, we observe a core–shell like structure with a low Sn concentration of less than 2% in the NW core regardless of the growth temperature. We then investigate the impact of adding different fractions of Ag, Al, Ga and Si to Au catalyst on the incorporation of Sn. A significant improvement of Sn incorporation up to 9% is obtained using 75:25 Au–Al catalyst, with a high degree of spatial homogeneity across the NW volume. Thermodynamic model based on the energy minimization at the solid–liquid interface is developed, showing a good correlation with the data. These results can be useful for obtaining technologically important GeSn material with a high Sn content and, more generally, for tuning the composition of VLS NWs in other material systems.
Materials: properties, characterization or tools
245701
Ziyan Kong, Huiying Wang, Kun Hou and Lunhui Guan
The research on low-cost, high-performance non platinum group metal (PGM) oxygen reduction reaction (ORR) catalysts is of great significance for the rapid promotion of fuel cells’ practical applications. In this work, Mn–N–C catalyst with outstanding activity was prepared through using hydrogel formed by coordination of sodium alginate (SA) and Mn2+ as the precursor. During the preparation process, g-C3N4 was added to improve the surface area enrich the pore structure of catalysts, as well as to function as the nitrogen source. Compare with commercial Pt/C catalyst, the optimum Mn–N–C catalyst possesses extraordinary ORR activity in alkaline electrolytes, with a half-wave potential (E1/2) of 0.90 V. In addition, the Mn–N–C catalyst also displays exceptional stability in alkaline and acidic electrolytes, much superior to Pt/C catalyst.
245702
Chuan-Xin Cui and Jin-Wu Jiang
Few-layer graphene has been widely regarded as an efficient filter for gas separation, but the effect of the layer number on the gas permeation process is still unclear. To explore the layer number effect, we perform molecular dynamics simulations to investigate the gas permeation through a nanopore within the few-layer graphene. Our numerical simulations show that the permeation constant decreases with increasing layer number, which is analyzed based on the macroscopic Kennard empirical model. The macroscopic model is in good agreement with the numerical result in the limit of large layer number, but there are obvious deviations for the medium layer number. We generalize the macroscopic model by considering the nanoscale effect from the surface morphology of the nanoscale pore, which can well describe the layer number dependence for the gas permeation constant in the full range. These results provide valuable information for the application of few-layer graphene in the gas permeation field.
245703
Zi-Feng Tian, Hong-Yan Zeng, Shi-Bing Lv, Yi-Wen Long, Sheng Xu, Hao-Bo Li and Kai-Min Zou
A facile two-step hydrothermal approach with post-sulfurization treatment was put forward to construct the mixed transition metal sulfide (NiCoZnS) with a high electrochemical performance. The different morphologies of NiCoZnS materials were successfully fabricated by adjusted the Ni/Co molar ratio of the NiCoZn(OH)F precursor. Moreover, the in situ phase transformation from the NiCoZn(OH)F phase to Zn0.76Co0.24S and NiCo2S4 phases and lattice defects via the S2− ion-exchange were determined by x-ray diffractometer, transmission electron microscopy and x-ray photoelectron spectroscopy techniques, which improved electric conductivity and interfacial active sites of the NiCoZnS, and so promoted the reaction kinetics. Significantly, the urchin-like NiCoZnS1/1 prepared at the Ni/Co molar ratio of 1.0 exhibited promising electrochemical performances with high capacitance and excellent cycling stability. Furthermore, the asymmetric device (NiCoZnS//AC) using NiCoZnS1/1 as the positive electrode had excellent supercapacitor performances with an energy density of 57.8 Wh·kg–1 at a power density of 750 W·kg–1 as well as a long cycle life (79.2% capacity retention after 10 000 cycles), indicating the potential application in high-performance supercapacitors.
245704
Luyang Hu, Jingming Wang, Zhidan Wang, Fabing Li, Jing She, Yufeng Zhou, Yumin Zhang and Yin Liu
Smart surfaces with switchable wettability are widely studied for environmental application. Although a large number of stimulation routes provide broad prospects for the development of smart surfaces, achieving high sensitivity, fast response and recovery, simple operation, security and good stability is still challenging. Herein, a Janus membrane via electrospinning, chemical bath deposition and heat treatment is constructed. By using the hydrophilic ZIF-L nanosheet to functionalize the hydrophobic thermoplastic polyurethane (TPU) substrate, a smart surface utilizes the ZIF-L crack induced by strain in the hydrophilic layer to control surface wettability is obtained. In the range of 0%–100% strain, the wettability of the smart surface presents an obvious change with stretching, and water contact angle of the surface shows a monotonic increase with a maximum tuning range from 47° to 114°. Due to local fusion of the TPU microfibers and good binding between the ZIF-L layer and the TPU substrate after heat treatment, the prepared Janus membrane exhibits consistent and symmetrical hydrophilic–hydrophobic–hydrophilic transition curves in 50 stretching-releasing cycles. Thanks to the porous and asymmetric architecture, the membrane shows good oil–water separation performance, and the separation flux increases with the increase of strain, while the separation efficiency is always higher than 98%. Because of the excellent structural stability, the robust membrane with 100% strain maintains its oil–water separation property for 50 stretching-releasing cycles. This study provides a new perspective for the development of smart material with stimuli responsive surface for oily wastewater purification.
245705
Shenghui Chen, Jiaqi Ding, Quanjiang Li, Di He, Yanli Liu, Li Wang, Qiang Lyu and Meishan Wang
At present, there is a general contradiction between permeability and selectivity of reverse osmosis (RO) membranes for desalination; a membrane with higher water permeability will give a lower salt rejection or selectivity, and vice versa. In this work, single-layer nanoporous graphene is used as RO membrane to investigate the effects of pore shape to reduce this contradiction by molecular dynamics simulations. Two kinds of pores (round and rectangular pores) with different sizes are simulated. For round pore, although the water permeability increases with the increase of the pore size, the salt rejection rate drops rapidly. For rectangular pore, reasonable designed pore structure can achieve improved water permeability and high salt rejection of graphene membrane by keeping one-dimensional length (i.e. the width) of the pore less than the size of the hydrated ions and increasing the other dimensional length. The restriction of one dimension can prevent the passage of hydrated ions through the pore effectively. This ‘one-dimensional restriction’ provides a simple strategy for designing RO membrane with variable pore structures to obtain a better desalination performance.
245706
Jin Zhang, Cong Fang, Yang Li and Wei An
Exploring the format of active site is essential to further the understanding of an electrocatalyst working under ambient conditions. Herein, we present a DFT study of electrocatalytic nitrogen reduction (eNRR) on W4 tetrahedron embedded in graphene-like C2N (denoted as W4@C2N). Our results demonstrate that N-affinity of active sites on W4 dominate over single-atom site, rendering *NH2 + (H+ + e−) →*NH3 invariably the potential-determining step (PDS) of eNRR via consecutive or distal route (UL = −0.68 V) to ammonia formation. However, *NHNH2 + (H+ + e−) →*NH2NH2 has become the PDS (UL = −0.54 V) via enzymatic route towards NH2NH2 formation and thereafter desorption, making W4@C2N a potentially promising catalyst for hydrazine production from eNRR. Furthermore, eNRR is competitive with hydrogen evolution reaction (UL = −0.78 V) on W4@C2N, which demonstrated sufficient thermal stability and electric property for electrode application.
245707
Luca Camilli, Daniele Capista, Piergiorgio Eramo, Angelo Antonio D’Archivio, Maria Anna Maggi, Andrea Lazzarini, Marcello Crucianelli and Maurizio Passacantando
Clean water is vital for healthy ecosystems, for human life and, in a broader sense, it is directly linked to our socio-economic development. Nevertheless, climate change, pollution and increasing world population will likely make clean water scarcer in the near future. Consequently, it becomes imperative to develop novel materials and more efficient ways of treating waste and contaminated water. Carbon nanotube (CNT) sponges, for example, are excellent in removing oleophilic contaminants; however, due to their super-hydrophobic nature, they are not as efficient when it comes to absorbing water-soluble substances. Here, by means of a scalable method consisting of simply treating CNT sponges at mild temperatures in air, we attach oxygen-containing functional groups to the CNT surface. The functionalized sponge becomes hydrophilic while preserving its micro- and macro-structure and can therefore be used to successfully remove toxic contaminants, such as pesticides, that are dissolved in water. This discovery expands the current range of applications of CNT sponges to those fields in which a hydrophilic character of the sponge is more suitable.
245708
Fang Deng, Ping Wu, Guowen Qian, Yang Shuai, Lemin Zhang, Shuping Peng, Cijun Shuai and Guoyong Wang
Black phosphorus (BP) exhibits great potential as antibacterial materials due to its unique photocatalytic activity. However, the unsatisfactory optical absorption and quick recombination of photoinduced electron–hole pairs restrain its photocatalytic antibacterial performance. In this work, silver nanoparticles (AgNPs) were decorated on BP to construct BP@AgNPs nanohybrids and then introduced into poly-l-lactic acid scaffold. Combining the tunable bandgap of BP and the LSPR effect of AgNPs, BP@AgNPs nanohybrids displayed the broaden visible light absorption. Furthermore, AgNPs acted as electron acceptors could accelerate charge transfer and suppress electron–hole recombination. Therefore, BP@AgNPs nanohybrids achieved synergistically enhanced photocatalytic antibacterial activity under visible light irradiation. Fluorescence probe experiment verified that BP@AgNPs promoted the generation of reactive oxygen species, which could disrupt bacteria membrane, damage DNA and oxide proteins, and finally lead to bacteria apoptosis. As a result, the scaffold possessed strong antibacterial efficiency with a bactericidal rate of 97% under light irradiation. Moreover, the scaffold also exhibited good cytocompatibility. This work highlighted a new strategy to develop photocatalytic antibacterial scaffold for bone implant application.
245709
Ping Rong, Yi Liu, Shiyong Gao, Huiqing Lu, Shuai Ren, Lin Li, Xinzhi Ma, Qicheng Zhou, Junpei Chen and Jinzhong Wang
A novel CaIn2S4 with three-dimensional octahedral nano-blocks (ONBs) are successfully synthesized on fluorine-doped tin oxide (FTO) substrate by a simple hydrothermal method. The CaIn2S4 ONBs are uniform grown and scattered on the whole FTO substrate with high regular and symmetric morphology as well as average diagonal length of about 600 nm. Based on the as-synthesized CaIn2S4 ONBs, a photodetector (PD) is fabricated. Satisfyingly, it is found that the CaIn2S4 ONBs PD achieves a broad-band response ranging from ultraviolet (UV) to visible ( vis) light at zero bias voltage. It is also significant that the CaIn2S4 ONBs PD enables a fast response, in which the rise time and decay time are less than 0.15 and 0.2 s, respectively. Furthermore, the morphological evolution of the CaIn2S4 ONBs and plausible UV/vis detection mechanism of the CaIn2S4 ONBs PD are discussed.
Reply
Comment and Reply
248001
Hanlin Guo, Rui Zhou, Xu Li, Zhenhu Li and Shuangyi Liu
Rechargeable aluminum-ion batteries (AIBs) are regarded as the next-generation energy storage devices due to their low flammability, low cost and high power density as well as abundant aluminum (Al) reserves. However, these popular ionic liquid electrolytes contain highly corrosive acid, which always corrodes the most used positive current collector, thus hindering the commercialization of AIBs. This study proposes an efficient and economical method of coating amorphous Ni3S2 compound on a nickel metal current collector (Ni-S/Ni). The conductivity and the onset oxidation potential of amorphous Ni3S2 coating can be up to 2.3 × 106 S m−1 and 2.7 V respectively. A Ni-S/Ni current collector can provide excellent cycling stability with no electrochemical corrosion in the AIBs. The AIBs fabricated using a Ni-S/Ni current collector exhibits a specific capacity of 65 mAh/g at 1 A g−1, high coulombic efficiency of 99% and cyclability of at least 2000 cycles. Moreover, the total cost of the Ni-S/Ni current collector can be limited to less than 3.3 USD/m2. The comprehensive performances of these AIBs are better than most reported results so far, which indicates that this method can advance the commercialization of AIBs.