Indium interlayers (Equation or symbol description not available10nm thick) were used to form highly transparent and low-resistance indium-tin oxide (ITO) Equation or symbol description not available(200nm) ohmic contacts to p-GaN for high-brightness light emitting diodes (LEDs). The In/ITO contacts became ohmic with a specific contact resistance of Equation or symbol description not available1.46×10−3Ωcm2 and produced transmittance of 95.8% at wavelength of Equation or symbol description not available460nm when annealed at Equation or symbol description not available530°C. Blue LEDs fabricated with the annealed In/ITO p-type contact layers exhibited a forward-bias voltage of Equation or symbol description not available3.42V at an injection current of Equation or symbol description not available20mA. The light output power of LEDs with the In/ITO contacts was enhanced 91% at Equation or symbol description not available20mA compared to LEDs with the oxidized Equation or symbol description not availableNi∕Au contacts.