The deposition of amorphous indium-zinc oxide (IZO) films by cosputtering from Equation or symbol description not availableIn2O3 and ZnO targets near room temperature was investigated as a function of power, process pressure and oxygen partial pressures in the sputtering ambient. The resistivity of the films with Equation or symbol description not availableIn∕Zn ratio between 0.3 and 0.6 could be controlled between Equation or symbol description not available10−3 and Equation or symbol description not available103Ωcm by varying the oxygen partial pressure. The corresponding electron mobilities were Equation or symbol description not available5–20cm2V−1s−1. The optical transmittance of the IZO films was Equation or symbol description not available70% in all cases. Ohmic contact resistances in the range of Equation or symbol description not available3–8×10−5Ωcm were obtained with both Equation or symbol description not availableNi∕Au and Equation or symbol description not availableTi∕Au deposited by electron beam evaporation. ZnO films deposited under the same conditions always showed evidence of polycrystallinity, while the InZnO films remained amorphous.