Copper indium gallium diselenide layers with Equation or symbol description not availablep+, p, i, n, and Equation or symbol description not availablen+-type electrical conduction, as predetermined, have been electrodeposited from aqueous solutions in a single bath. The photoelectrochemical cell has been used as the key analytical tool to determine the electrical conduction type, and X-ray fluorescence has been used to determine the stoichiometry of the corresponding layers. Optical absorption, X-ray diffraction, and atomic force microscopy have been used to investigate the bandgap, bulk structure, and surface morphology of the material layers, respectively. It has been found that the bandgaps of these layers can be varied in the range Equation or symbol description not available1.10–2.20eV. A four-layer n-n-i-p solar cell structure was fabricated and a corresponding energy band diagram for the device constructed. Current-voltage and capacitance-voltage measurements were carried out to assess the devices, and these parameters (Equation or symbol description not availableVoc≈570mV, Equation or symbol description not availableJsc≈36mAcm−2, and Equation or symbol description not availableFF≈0.40) indicate encouraging characteristics enabling further development of multilayer thin-film solar cells based on Equation or symbol description not availableCuInGaSe2. The addition of a Equation or symbol description not availablep+ layer to the structure improved device parameters as expected due to improvements at the metal contact to the Equation or symbol description not availablep+ surface of the n-n-i-p-Equation or symbol description not availablep+ structure.