ZnO microstructures were fabricated by wet-chemical etching with aqueous solutions of HCl and Equation or symbol description not availableCH3COOH and patterned resist masks prepared by electron-beam lithography. Anisotropy of the etching rate caused the formation of microstructures corresponding to the crystal habit. In fact, all the pit structures made on Equation or symbol description not available(0001¯), Equation or symbol description not available(101¯0), and Equation or symbol description not available(112¯0) surfaces of ZnO single crystal were characterized by {Equation or symbol description not available101n¯} Equation or symbol description not available(n=integer) faces, and all the pyramidal structures made on the Equation or symbol description not available(0001¯) surface were characterized by {Equation or symbol description not available112n¯} facets forming hexagonal projections. Regarding etchant dependence, Equation or symbol description not availableCH3COOH[aq] enabled us to create structures with sharp edges and corners, while etching with HCl[aq] resulted in structures with rounded shapes. The coalescence of pits during chemical etching was also investigated using mask patterns having symmetrically aligned windows that were close to each other.