Abstract
To facilitate the production of
IR detectors on Si substrates, epitaxial films of
and
have been deposited by molecular‐beam epitaxy (MBE) onto both Si(001) and Si(112) substrates. On Si(001) substrates misoriented from 0 to 8° toward [110], parallel epitaxy of
and
has been observed. Using
initiation layers, high quality
films have been demonstrated with (004) reflection x‐ray rocking curves as narrow as 158 arc‐secs for
and 78 arc‐secs for
.
films grown by liquid‐phase epitaxy (LPE) on these MBE
substrates have x‐ray rocking curves as low as 55 arc‐secs and average etch pit densities of
. IR detectors, fabricated from LPE‐grown p‐on‐n heterojunctions on
, are comparable in performance to detectors on bulk
substrates with
at 78 K for a 9.4 μm cutoff wavelength. On vicinal Si(112) substrates,
nucleates in either the (112) or twin (552) orientation, depending on the Si misorientation.
deposited on
nucleates in the same orientation as the
. X‐ray rocking curves as narrow as 110 arc‐secs have been obtained for
epitaxy.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
