This paper, Part II of this series of two articles, is devoted to two‐dimensional modeling of silicon nitride low pressure chemical vapor deposition from a silane‐ammonia mixture. In that aim, the CVD2 model previously developed in our laboratory, which takes into account hydrodynamics, mass transport, and chemical reactions, is adapted to this special kind of deposition. The gas phase mechanism described in Part I is integrated in the model. The concentration profiles of Equation or symbol description not availableNH3, Equation or symbol description not availableSiH4, Equation or symbol description not availableSiH2, Equation or symbol description not availableSiHNH2, Equation or symbol description not availableSiH3NH2, and Equation or symbol description not availableH2 have been computed and the contribution of the different species to deposition rate have been evaluated. The results obtained confirm the importance of the entrance zone length of the reactor, which conditions the formation of the stable species Equation or symbol description not availableSiH3NH2, generating Equation or symbol description not availableSiH2 and Equation or symbol description not availableSiHNH2, which are responsible for the strong overthicknesses observed at the wafer periphery. © 1999 The Electrochemical Society. All rights reserved.