Nonselective dry etching of GaN, Equation or symbol description not availableIn0.12Ga0.88N, and their multiquantum wells (MQW) was examined using a Equation or symbol description not availableCl2/CH4/H2/Ar plasma at room temperature. The etching characteristics were studied as functions of Equation or symbol description not availableCH4 concentration, inductively coupled plasma power, and radio frequency table power. Nonselective etching of MQW using a Equation or symbol description not availableCl2/CH4/H2/Ar plasma was monitored by means of laser interferometric reflectance. Ga, In, and GaCl as well as CN were observed as group III and group V etch products, respectively, in the optical emission spectrum during plasma etching. By optimizing the Equation or symbol description not availableCH4 concentration in the gas mixture, the roughness on the etched surface and the sidewall of the MQW could be substantially reduced. These results indicate that Equation or symbol description not availableCl2/CH4/H2/Ar plasma chemistry, combined with a postannealing process for etch-damage recovery, is suitable for the fabrication of optoelectronic devices using GaN, InGaN, and GaN/InGaN MQW. © 2001 The Electrochemical Society. All rights reserved.