Preface
011001
The following article is Open access
Assalamu’alaikum, Wr. Wb.
The International Conference on Theoretical and Applied Physics (ICTAP) is a conference organized by Physical Society of Indonesia (PSI) and hosted by Universitas Mataram, Universitas Hamzanwadi, Universitas Pendidikan Mandalika, Universitas Muhammadiyah Mataram, Universitas Islam Negeri Mataram, Sekolah Tinggi Keguruan dan Ilmu Pendidikan Taman Siswa Bima, Sekolah Tinggi Keguruan dan Ilmu Pendidikan Bima, and Universitas Samawa. It is an annual conference of the Society and moves from one major city to another, started ten years back in Bandung (Capital city of West Java province), then consecutively moved to Palangkaraya (Central Kalimantan, 2012), Malang (East Java, 2013), Denpasar (Bali, 2014), Kendari (South-East Sulawesi, 2015), Makassar (South Sulawesi, 2016), Yogyakarta (2017), Medan (2018), and Bandar Lampung (2019). The 10th ICTAP held by virtual conference from Lombok, which is one of the Beautiful Island in Indonesia, on 20-22 November 2020.
International Conference on Theoretical and Applied Physics (ICTAP) has offered a platform for bringing together students, postdocs, academics, and industrial experts to exchange their ideas and contributing an integrative approach to research in theoretical and applied physics. The program of the conference consisted of oral invited lectures of the leading experts on selected topics. The international seminar with the theme “Physics Science Research and Learning Facing Challenges in the Industrial Revolution 4.0 Era” is expected to provide great benefits for developing physics research in the future’s challenging 4.0 era. It is aimed at promoting, developing, and disseminating interdisciplinary research from many different fields of physics.
Every submitted paper was reviewed using a single-blind-reviewed process. Note that their authors’ articles presented in these Proceedings have been considerably modified after discussion during presentations or in the review process. Furthermore, let me express my appreciation and gratitude to the committee and the entire international conference committee on theoretical and applied physics (ICTAP), who have prepared this conference. ICTAP 2020 was attended by 10 Keynote Speakers, 115 participants, and 10 invited speakers, representing 40 institutions or higher education institutions.
List of Brief of Event, Advisory Board, Chairman, Co-Chairman, Secretary, Financial Manager, Committee and IT Management are available in this pdf.
011002
The following article is Open access
The 10th International Conference on Theoretical and Applied Physics
(ICTAP 2020)
All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.
• Type of peer review:
Single-blind Review
• Conference submission management system:
Submission conference using the website that is http://ictap.unram.ac.id/register-login/
• Number of submissions received: 143
• Number of submissions sent for review: 122
• Number of submissions accepted: 120
• Acceptance Rate (Number of Submissions Accepted / Number of Submissions Received X 100): 83,9%
• Average number of reviews per paper: 2 reviews per paper
• Total number of reviewers involved: 48 reviewers
• Any additional info on review process (eg Plagiarism check system): All submissions were checked for plagiarism with Turnitin and Grammar checking by Grammarly
• Contact person for queries (Full name, affiliation, institutional email address)
Assoc. Prof. Drs. Aris Doyan, M.Si., Ph.D
Universitas Mataram
aris_doyan@unram.ac.id
Papers
012001
The following article is Open access
Syaharuddin, D A Sari, J Sabaryati, C Zonyfar, S F Sihotang, A Fadillah, T H N I Sari, D S Putra, R R Harun and V Mandailina
Climate change is a global phenomenon in which its impact can be perceived locally. In the face of this phenomenon, it is necessary to prepare and overcome this threat by developing various mitigation and adaptation strategies for climate change. To support this strategy, climate data such as temperature (maximum and minimum), rainfall, number of rainy days, as well as necessary information in the future need to be detected to prepare good and directional policies. The study aims to determine the climate parameters in Mataram city using forecasting by constructing the algorithm the Back Propagation method. In using the Matlab GUI application by analyzing climate change in Mataram city by using monthly data for the last 10 years. In the simulation stage, the data taken are the maximum temperature, minimum temperature, rainfall, and the number of rainy days in Mataram city. Based on the results of the training and testing process for climate data in the city of Mataram with a prediction of maximum temperature occurred in November at 32,580C and maximum rainfall occurred in December as much as 399.2931 mm, while for the maximum number of rainy days occurred in January with a total of 21.99 days. These results can be used as an alternative policy in the handling and preparation of extreme climate change.
012002
The following article is Open access
M Souisa and S M Sapulete
This investigation aims to determine the hydrophysical gradient and the distribution of shallow surface geothermal manifestations. Geothermal manifestation data acquisition using the hydrophysical method. The manifestation of surface geothermal at the research location is only used by the local community as a place for bathing, and there is no accurate data regarding the potential of geothermal so that it can be used as a development of tourist objects (geotourism). The results showed the distribution of temperature and conductivity of surface hot springs based on hot springs around geothermal energy, consisting of two locations, namely the locations of Tulehu Village, Salahutu Subdistrict, and Nalahia Village, Nusalaut Subdistrict. The Tulehu Village location consists of two loci that are the Hatuasa locus with surface temperature values ranging from (60.1 - 80.9) °C and conductivity values ranging from (0.69 - 0.95) W/m. °C, and Talanghaha locus locations surface temperature values range from (65.5 - 67.5) °C, and conductivity values ranging from (0.68 - 0.78) W/m
C. Whereas the location of Nalahia Village consists of the Bantang locus which has a surface temperature value of (50.1 - 61.9) °C, and the conductivity value is (0.51 - 0.71) W/m
C. For this reason, the hydrothermal conditions of geothermal manifestations in the two research sites can be developed into geothermal hot water and maximum therapy to improve the economy of the local community and the development of the geotourism sector in Maluku Province.
012003
The following article is Open access
D Parwatiningtyas
The large number of infrastructure improvements in Indonesia, causing the need for an underground investigation first, so that the buildings become sturdy and have a small risk of natural disturbance (landslides, land subsidence, earthquakes),etc. One of method used in underground investigations is the Ground Penetration Radar (GPR) method. The GPR antenna system consists of a sending antenna (transmitter antenna), as an electromagnetic signal transmitter and part of the receiving antenna (receiver antenna), that is as a detector of reflected electromagnetic waves. The scope of this research is to collect data in the field using the GPR method, and perform data processing using the Reflex-W application software to obtain information on the condition of the structure, depth of the building foundation, as well as its subsurface information. After all the information on the above values is obtained, we are able to manage the area of the local building more conducive and stable, especially those related to the dynamics of ground movement. GPR data collection was carried out for 3 days, at PANASONIC COMPANIES Tapos Depok, Jakarta – Bogor street on August 7th and 8th 2019. Then data processing and report writing were carried out at the office of Putra Cipta Jaya Consultant from August 12nd to September 8th 2019. Based on the results of the GPR inversion processing using Reflex-W software from 9 measured areas, information was obtained that the condition of the Building and its surroundings as a whole was still in good condition. There are only a few parts of the area that are attention in detail here, which is the office area, 1st factory building, 1st floors, as well as the generator building area, which in general, the three areas of this underground structure there is a land that moves down approximately 1-5 metres from the east and west direction. Therefore the building structure of this area is made a deep pondation, which is approximately 10 to 26 metres.
012004
The following article is Open access
M Makhrus, S Ayub, Wahyudi, N N P S Verawati and A Busyairi
This study aims to improve students’ critical thinking skills of optical material through the application of CCM-CCA assisted by virtual experiments. The study was conducted using a mixed-method that is using the exploratory design. The subjects of this study were 30 students in the physics education study program. Students’ critical thinking skills are obtained through critical thinking tests. The results showed that the CCM-CCA assisted by virtual experiment was feasible to use for an optical material. Students’ critical thinking skills have increased in 5 indicators of critical thinking, namely basic clarification, basic decisions, inference, further explanation, reasoning. Learning instructions based CCM-CCA assisted with virtual experiments on optical materials are valid and can be used in learning. Students’ critical thinking skills have improved after learning with CCM CCA with the help of virtual experiments. The inference indicator experienced the highest increase among other indicators.
012005
The following article is Open access
Hardani, S Idawati, B A A Mustariani, Y K Dewi, A Hidayatulloh and M I Darmawan
The study aims to characterize Ruthenium as a photosensitizer in Dye-Sensitized Solar Cells (DSSC). Samples are made in the structure of the working electrode pair Sandwich and the opponent electrode. Sample absorbance test using UV-Visible LAMBDA 25 spectrophotometer and test current and voltage characterization (I-V) using Keithley 2602A. The results of the study showed that the maximum absorbance in the high dye ruthenium appeared at the two peaks at 448 nm and 580 nm. While I-V curve measurements showed great efficiency that resulted in ruthenium dye with concentrations of 0.1, 0.5, and 1 in a row were 0, 12%, 0.186%, and 0.26%. These results show that higher concentrations of ruthenium dye can increase the value of the resulting efficiency.
012006
The following article is Open access
H Akhsan, S Rianti, M Muslim and M Ariska
A valid and practical digital handout on particle wave dualism material was produced in this study. The adaptation of Rowntree product development model and Tessmer formative evaluation was used as the method on the Physics Education Study Program, FKIP, Sriwijaya University. The walkthrough and questionnaire techniques was used to collect data. The result showed the mean score for the validity of the digital handout was 4,53 for the design, content, and linguistic aspects with a highly valid category. The practicality average score in the one-to-one evaluation stage was 79,08% (practical) and in the small group evaluation stage was 84,59% (practical). The product can be used as an additional material in modern physics learning to improve students’ technological literacy.
012007
The following article is Open access
B N Jayawiguna and H S Ramadhan
By using the appropriate Killing vector for BTZ-Sen black hole, we obtained surface gravity and the corresponding Hawking temperature. The stability of a black hole can be seen from specific heat. From the result, we can infer that the Hawking temperature reduces to the well known BTZ when the charge vanishes and there is no phase transition with appropriate fixed parameters.
012008
The following article is Open access
M Irfan, O C Satya, Arsali, M Ariani, A Sulaiman and I Iskandar
Groundwater level is a parameter that is closely related to fire events in peatlands. The lowering of the groundwater level causes a decrease in soil moisture so that the peatlands become dry and flammable. This study looked for the rate of decline in groundwater levels at 6 locations on peatlands in South Sumatera. The data used are in-situ data from 6 measuring stations belonging to the Peat Restoration Agency on peatlands in South Sumatera. The purpose of this study was to determine the characteristics of the groundwater level which is one of the fire control parameters as an effort to mitigate fire disasters on peatlands. The groundwater level decline rate obtained was (cm/day): 1.68, 1.45, 1.41, 0.85, 0.75, and 0.39 respectively for Sungai Saleh-1, Padang Sugihan-2, Karang Agung, Padang Sugihan-3, Cinta Jaya-1, and Cinta Jaya-2.
012009
The following article is Open access
Y B Bhakti, I A D Astuti, R A Sumarni, D Sulisworo and M Toifur
This research aims to improve the ability of the teacher’s Junior High School in practicing flipped classroom learning in physics lessons. A quantitative approach with the type of descriptive was chosen to the research by modeling of one group pre-test and post-test design. The subject of the research was 34 physics teachers in Junior High School, which is 13 of male teachers and 21 female teachers. Data were collected by observed the activities, giving of questionnaires and holding of the test. In consequence, instrumentations used for the research were observation sheets, qestionnaires, and multiple-choice questions. The result showed that activities were slightly increased from meeting I with a percentage of 78%, meeting II with a percentage of 83.05% and meeting III with a percentage of 87.28%. According to the questionnaire, teachers’ motivation was good with a percentage of 79.81% and teachers’ interest was very good with a percentage of 82.73%. Therefore, it can be concluded that using of ARCS can improve not only learning outcomes but also the motivation and interest of teachers. This study may have contributed to the literature since there are few studies available regarding the flipped classroom approach adapted to the ARCS motivation model on physics learning at school.
012010
The following article is Open access
A Herawati, I M Astra and Y Supriyati
This research aimed to determine the differences in student learning outcomes through the Inquiry learning model, to see the influence of the interaction between learning models and logical-mathematical intelligence on student learning outcomes, and to find out differences in student learning outcomes through the inquiry learning model in the logical-group mathematical intelligence high and low. The research was conducted at Public High School 2 in South Tangerang City with a sample of 74 students consisting of 37 students in the experimental class and 37 students in the control class. This study used the quasi-experiment method and the research design was treatment by level 2x2. Based on the research results obtained by data analysis and hypothesis testing, it can be concluded that: (1) there are differences in the learning outcomes of students when given the inquiry learning model; (2) there is an interaction effect between inquiry learning models and logical-mathematical intelligence on student learning outcomes; (3) the learning outcomes of students who are taught with the guided inquiry learning model are higher than those taught with the self inquiry learning model in both the high and low logical-mathematical intelligence groups.
012011
The following article is Open access
R H Sardjono
Since 1987, electrical laboratory of SNSU was built a traceability capability of DC voltage unit from PJVS up to two Multifunction Calibrator instruments. Therefore, the dissemination accuracy was performed gradually from PJVS to two multifunctions calibrator through a standard cell instrument. The two units of multifunction calibrators instruments are used as working standards instrument and should be maintained its traceability. One of the multifunction calibrator (MCS) instrument that is traceable to the standard cell instrument will be disseminated it accuracy to the other multifunction calibrator (MCU) instrument was done in these research. A potentiometer principle was basically used as a subtractor system that subtract the MCS value from the MCU value. Uncertainty analysis is carried out in this paper to validate the characteristics of the method against the NULL method based on the error number (En) reaching -0.1
012012
The following article is Open access
Aminatun, F F S B Tenong, D Hikmawati and E M Setiawati
This study aims to determine the effect of variations in the composition of the hydroxyapatite-Poly Vinyl Alcohol (HA-PVA) coating to the Vickers hardness and the corrosion rate of SS316L. Cylindrical stainless steel-316L (SS316L), which has a diameter of 8mm and a thickness of 5mm, was sterilized by immersion in ethanol then rinsed using distilled water. The coating material is made from a mixture of HA-PVA with variations in the composition of A (27: 3), B (25: 5), C (20:10) and D (15:15) (in wt%) dissolved in 70% distilled water (in wt%). HA-PVA solution was coated on SS316L using airbrush spraying method at a pressure of 3.5x105 Pa, a nozzle diameter of 0.4 mm and a nozzle-sample distance of 10 cm. The test results show that the variations of the HA-PVA composition affect the hardness and the corrosion rate of SS316L. The more HA coating on the SS316L, the more it protects the SS316L substrate from corrosion. The conclusion show that the sample A with the HA-PVA composition of 27: 3 (in wt%) is found to be the best composition with a Vickers hardness of 2.43 VHN and a corrosion rate of 0.004 mm/year.
012013
The following article is Open access
Susilawati, A Doyan and L Muliyadi
The synthesis of composite board made from a mixture of coconut coir and Terminalia catappa fruit fibers using Polyvinyl Acetate (PVAc) matrix has been successfully carried out. The synthesis aims to determine the effect of a mixture of coconut coir and Terminalia catappa fruit fibers with PVAc matrix on the mechanical properties of the composite board. The samples were made with variations in the composition of the volume fraction of coir fiber and Terminalia catappa fruit fibers, namely (30:70), (40:60), (50:50), (60:40), and (70:30)%. The ratio of the volume fraction of the mixture of natural fibers and the PVAc) matrix made was (70:30)%. The sample production begins with taking the coconut coir and Terminalia catappa fruit, drying and cutting, then mixing the coconut coir and Terminalia catappa fruit fibers with a PVAc matrix, printing the composite with printing tools and drying. The finished sample was then mechanically tested using the UTM tool AnD, model R3010. The results showed that the value of the maximum tensile stress and the modulus of elasticity increased with the increase in the concentration of coir fibers used. The value added in length and strain decreased with the decrease in the concentration of coco fiber used. Overall, the composite sample has met the SNI 03-02105-2006 criteria where the maximum tensile stress value ranges from 8.21 MPa to 18.81 MPa and the modulus of elasticity ranges from 829.71 MPa to 1620.67 MPa.
012014
The following article is Open access
A Anugrayanti, M Arsyad and V A Tiwow
This study aims to know the susceptible disaster region based on peak ground acceleration and earthquake intensity on earthquake study cases in Mamasa 2018. Data that is used in this research is data on earthquake cases in Mamasa 2018 that is gained from the Indonesian Agency for Meteorology, Climatology, and Geophysics (BMKG) district IV Makassar, it included data of the time when the earthquake happened, latitude, longitudinal (, depth (< 60 km) and magnitude (≥ 5) SR. The calculation of on peak ground acceleration was conducted by using Donovan and Mc.Guirre methods, whereas to calculate the value of intensity, it is using the Wald method (1999). The result from the calculation of on peak ground acceleration by Donovan is 95.903 gal to 377.094 gals with the intensity VI to VIII MMI. Whereas the calculation result of on peak ground acceleration by Mc.Guirre method is 58.981 gal to 227.39 gals with the intensity V to VII MMI. MMI intensity of the Wald method is obtained by using the PGA value conversation Mc.Guirre method that is closer to the intensity of the result of the macroseismic survey in Mamasa District and relates with the damage that happened on location. The mapping of earthquake intensity based on PGA Mc.Guirre method shows that 3 (three) sub-districts that have an intensity of VII MMI, namely Tawalian Sub-district, Mamasa Sub-district, and Sesean Padang Sub-district. The area is the most vulnerable. Mamasa has low-risk level from the earthquake, although sometimes an earthquake happened until now. This result is supported by a geological map in the Mamasa regions that showed source rock in that area is a type of hard rock that consis of granitic materials.
012015
The following article is Open access
N Yuningsih and D Irwanto
East Nusa Tenggara (NTT) is an island that has an electrification ratio of 85.84%. Small power nuclear power plant could be applied in such a remote area, and High-Temperature Gas Reactor (HTGR) is one of the potential options. Based on data obtained from the Central Statistics Agency (BPS), an HTGR was designed. The purpose of the present study was to find the optimal excess reactivity for HTGR using the basic model of Japan’s HTTR (High-Temperature Engineering Test Reactor). The calculation was conducted using the Standard Reactor Analysis Code System (SRAC) with the Japanese Evaluated Nuclear Data Library (JENDL) 4.0 as the nuclear data library. Calculations for modified HTTR geometry and fuel configuration was performed and analyzed. As a result, for 1.6 times the HTTR geometry model, (7.00 - 8.75)% fissile enrichment with the addition of 0.065% B4C material is the best configuration to obtain the optimal excess reactivity. Meanwhile, for 1.5, 1.4 and 1.3 times HTTR geometry the best configuration values were (5.00 - 6.75)% fissile enrichment with 0.035% B4C, (6.00 - 7.75)% fissile enrichment with 0.045% B4C and (7.00 - 8.75)% fissile enrichment with 0.050% B4C, respectively.
012016
The following article is Open access
R Rafika and S Syuhendri
This study aimed to analyze the misconceptions experienced by senior high school students on rotational and rolling motion topics. The sample consisted of 35 students of a state senior high school in Palembang, Indonesia, in grade 11 in a science class. The data was collected using the Rotational and Rolling Motion Conceptual Survey (RRMCS), and were analyzed using modified Certainty of Response Index (mCRI) with a scale of 0 to 5. The result showed that the distribution of students’ conceptual understandings were in four categories, i.e. understanding the concepts 1.70%, understanding the concepts but not sure 1.90%, holding misconceptions 58.30%, and not understanding the concepts 38.10%. It can be identified that the students experienced misconceptions in all the concepts involved, namely 54.30% in the moment of inertia, 57.10% in rotational kinetic energy, 60.0% in angular velocity, 62.90% in angular acceleration, 58.90% in the moment of inertia, 51.40% in rolling motion (relative motion), 65.70% in rolling motion (the role of friction and other parameters), and 55.70% in the sliding cube on an inclined plane. Therefore, teachers should consider these misconceptions experienced by students in choosing appropriate strategies to overcome them.
012017
The following article is Open access
Susilawati, A Doyan, A Harjono and M Jana
This study aims to determine the effect of the wave ripple learning media with the implementation of the guided inquiry model on the mastery of concepts for high school students. The material in the learning media for the wave ripples under study is reflection, diffraction refraction and interference. This type of research is an experimental research design with pre-test and post-test group design. The population in this study were all students of class XI high school in Mataram. Sampling using total sampling technique with class XIA as the experimental class and class XIB as the control class. The research hypothesis was tested using t-test with pretest and posttest and the improvement of learning outcomes was tested using the N-gain equation. Based on the results of hypothesis testing to master the concept, the value of t count (1.986) > t table (1.732) is obtained at the 5% significance level, so it can be concluded that there is an effect of the wave ripple learning media with the implementation of guided inquiry models on the mastery of concepts for high school students. Furthermore, the increase in concept mastery can be seen from the highest N-gain score in the experimental class found in the interference sub-material of 89.45%, while the highest N-gain score for the control class is in the refraction sub-material at 76.41%.
012018
The following article is Open access
N N Mulyaningsih, F Widiyatun and N Dwitiyanti
Agave plants can grow well in all weather conditions, so that they are very abundant in Indonesia. The appropriate processing technique is needed to develop the utilization of Agave plants, so that they have a higher value. The main purpose of this research is to conduct material engineering of Agave americana species, so that the Agave fiber has good quality when used as a natural composite material. The research method was used by giving 5% alkaline sodium hydroxide (NaOH) treatment for 30 minutes against Agave fiber (called T samples) and the results were compared with normal Agave fiber/not treated with alkaline (called UT samples). The parameters observed were the surface morphology of the fibers which were analyzed using Scanning Electron Microscopy (SEM) at magnifications of 250x, 500x and 1000x. SEM characterization results showed that Agave fiber treated with 5% NaOH alkaline had a denser surface morphology with an average cavity percentage of 9.015%, while untreated Agave fiber had a higher average cavity percentage of 29.795%. In addition, soaking with 5% alkaline NaOH also causes dirt that sticks to the fibers more easily, so the fibers were cleaner. The conclusion of the research shows that 5% alkaline NaOH treatment on Agave fiber could increase the strength and quality of Agave fiber.
012019
The following article is Open access
R Fadillah, Y Rati, R Dewi, R Farma and A S Rini
Bio-fabrication of ZnO films using plants, enzymes, and microorganisms has been recognized as an environmentally friendly procedure as an alternative to physical and chemical methods. In this research, the optical and structural properties of ZnO thin film have been investigated using UV-Vis spectrophotometer, X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM), respectively. The ZnO films was prepared by spin-coating the mixed solution of Zn(NO3)2 and watermelon (Citrullus lanatus) peel extract on glass substrate. The ZnO films were then annealed at 400°C for 3h. The UV-Vis absorbance spectra show the strong absorption peaks occurs over a range of wavelengths of 220-380nm, and 190-235 nm for pre-annealed and annealed samples, respectively. The optical band gap of the samples was influenced by the heat treatment. The as-prepared samples synthesized at pH 8 is 3.73 eV and increased up to 5.4 eV after annealed at 400 °C for 3 h. This result suggested that pre-annealed sample has better photocatalytic activity compared to the annealed samples. The XRD pattern of the ZnO films exhibits the ZnO diffraction peaks that correspond to the hkl of hexagonal wurtzite structure. SEM image shows that the morphology of ZnO samples are spherical and rod-like microstructure.
012020
The following article is Open access
A A Gerwin and H S Ramadhan
We examine a novel method in Coleman-de Luccia vacuum decay analysis by using tunneling wave function approach with additional non-minimal coupling term. Our approach has an advantage that the wave function analysis needs no time dependence, thus consistent with Wheeler-de Witt equation. In the calculation, we use WKB approximation and Hamilton-Jacobi Equation. We discover that the probability of tunneling is lower than the previous study and the tunneling probability depends on both the false and true vacuum state of the scalar field.
012021
The following article is Open access
I N Huda and H S Ramadhan
We examine the deflection of light due to the gravitational field of global monopole in Eddington-inspired Born-Infeld theory using strong field approach, which accurately explains light deflection when the impact parameter is small. In this paper, we will discuss the deflection angle and the radius of the photon sphere. We discover that the global monopole will increase the deflection angle and the radius of the photon sphere (compared to Schwarzschild), while EiBI parameter will decrease the radius of the photon sphere and the decreasing of deflection angle is shown clearly with small impact parameter.
012022
The following article is Open access
M V Akbariza, D Handoko and P Prajitno
In this research, a simulation study for temperature and level control in a liquid (water) mixing process is proposed using MATLAB/Simulink. The objective of this control system is to maintain the temperature and water level at the set points in a liquid mixing process by controlling the flowrate of cold and hot water that enters the mixing tank. The mixing tank used in this study is assumed to have a volume of 80 liter, while the maximum flowrates of both water inputs are 15 liter/min, and the maximum temperature and level in the mixing tank are 90 C and 75 cm, respectively. The influence of one variable to the other is reduced using decoupling technique. In the development process of the controller, PI controller is used to generate the training data required by the ANFIS-based controller. The performance of the proposed controllers has been tested with several set points changes by observing its performances parameters, such as RMSE, rise time, settling time, and % overshoot as quantitative data. It also has been compared with a PI controller using the same set point changes as the ANFIS-based controller did. These results show that the ANFIS-based controller is generally better than the PI controller. It has the average RMSE values of 0.174 and 0.196 for temperature and level control respectively, while the PI controller has 0.21 and 0.20 average RMSE values for temperature and level control.
012023
The following article is Open access
A Nasyori and F A Noor
The organic dyes used in dye-sensitised solar cells (DSSCs) possess a low efficiency, leading to problems in the development of more efficient and cheaper DSSCs. In this work, we analysed the effect of the concentrations of organic dye from yellow and red gambier (Uncaria) fruits. The concentrations were prepared with isopropyl alcohol at concentrations of 30, 50 and 70%, respectively. Titanium oxide (TiO2) is a semiconductor which was used in this work by utilising the method of the doctor blade, and indium tin oxide (ITO) was used as the conductive glass. The counter electrode and electrolyte were fabricated by burning candle and mixing KI + I2, respectively. The characteristic spectra of UV-Vis and FTIR were used to analyse the gambier fruit. We obtained that the tannins from red and yellow gambier fruit extract are highly potential to apply as a sensitiser in DSSCs. Furthermore, the measurement of current and voltage was employed under sun irradiation. We obtained that the highest efficiencies were 0.819924 % and 1.747999 % for red and yellow extract, respectively. It indicates that the concentration of the organic dye could improve the performance of DSSCs.
012024
The following article is Open access
N H Luthfiyah and T Mart
A new model for photoproduction of KΛ, i.e. γ + p → K+Λ and γ + n → K0Λ has been constructed by using the Feynman diagrammatic approach. By using this approach, we have calculated the scattering amplitude analytically. In addition, we have also included a number of very-high-spin nucleon resonances, i.e. those with spins 11/2 and 13/2, which are listed by the Particle Data Group (PDG). The unknown parameters in the model, i.e., the hadronic coupling constants, were extracted by fitting the calculated observables to nearly 9000 experimental data points. The result of the model calculations is compared with those of previous investigations and experimental data. From the comparison we may conclude that the constructed model can nicely reproduce the experimental data.
012025
The following article is Open access
A Rahmansyah and A Sulaksono
We construct Tolman Oppenheimer Volkoff (TOV) equations for anisotropic pressure of two non-interacted perfect fluid with different four-velocities. This paper’s primary motivation is that we obtain the result that could describe the neutron stars (NS) admixed with dark matter (DM) that satisfying constraint from GW190814. Otherwise, our result also can investigate other compact objects that are admixed with two non-interacting fluids. In this work, we extend the formalism in Ref [1] by considering each fluid’s anisotropic pressure. Therefore, the total energy-momentum tensor is the sum of two non-interacting anisotropic fluids with different four-velocities. The velocity difference of both fluids denotes here by b where it comes from each of four-velocities under transformation rotation. Our result’s direct impact is that we can assess each fluid’s impact of anisotropic pressure in two fluids formalism in NS or other compact objects properties.
012026
The following article is Open access
M Souisa, S M Sapulete and Isnawati
To reduce the risk of landslides and to be aware of areas that have the potential for further landslides, detailed measurements of these zones are required. Measurements were made to identify a sliding plane below the surface using the geoelectric resistivity method of the Wenner-Schlumberger configuration. The resistivity data from the interpretation results are used to determine slip plane’s slope and the potential for landslide masses. The research location is on steep hills in Air Kuning Batu Merah, Ambon City. The results showed that the slope angles for line-1 were 4.20 degrees, line-2 was 17.60 degrees, line-3 ranged from (22.80 - 23.20) degrees, and line-4 was 21.80 degrees. Furthermore, the estimated volume potential of landslide mass based on the cross-section of subsurface resistivity is 3,063.88 m3. With an indication of a landslide field, the slope has the potential for a subsequent landslide if affected by external and internal factors.
012027
The following article is Open access
K Ain, E Purwanti, R Rulaningtyas and N A Hairiyah
An impedance bode plot modelling simulation has been conducted with the regression method to determine the RC model. The aim of the research is to determine the RC model and determine the resistance and capacitance of the equivalent circuit. The study uses nine RC models which are modelled into a linear regression equation and the equivalent model is determined based on the smallest error. Gradient and regression constants are used to determine the resistance and capacitance of the equivalent model. The results in the RC series show that the equivalent model is the first model with a resistance 998.580? and a capacitance 9.253 pF with an error 2.4%. While the program implementation of the RC parallel produces a resistance 999.809? and a capacitance 9.995 pF with an error 0.042%.
012028
The following article is Open access
A Rahman, N Alfiyati, O Novyanto, N L Kartika and R Z Amdani
There were no studies that show an acceptable range of calibration factor value on precision surface roughness instruments. It is generally known that the calibration factor plays an essential role in precision surface roughness instruments. This study demonstrates the acceptability range for the calibration factor using the Shewhart control chart method. Calibration factor data were obtained by comparing the calibration certificate of a type A artifact with the measurement results obtained from a surface roughness instrument. During the last five years, the calibration factor data from the Talysurf i120 surface roughness machine were analysed using the Shewhart control chart to determine the lower (LCL) and upper control limits (UCL) the range of acceptability. The results showed that the acceptance range was between 0.849 and 1.041, with a doubt level of 1%. These results are expected to be useful for metrologists, industries, and surface roughness practitioners in general to analyse the reliability of their surface roughness instruments/profilometer.
012029
The following article is Open access
I Hikmah, A D Ramadhani and F T Syifa
The efforts to maintain indoor air quality from dangerous viruses need to be improved. One way is by sterilizing the room using a disinfectant which has a weakness, namely that it is unsafe if the disinfectant is exposed to the body, especially, when entering the respiratory system, it will become dangerous toxins. Therefore, an innovation of a healthy room that is safe for the respiratory system is needed by applying essential oil as a natural antiseptic liquid which is converted into gas through a diffuser that is connected to a gas sensor equipped with the Internet of Things (IoT) technology. It can record air quality data and connect to an Internet server to monitor indoor air quality easily and practically. The research was conducted by making different variations in the concentrations of essential oil to obtain maximum air quality. From the results we obtained, the level of air quality is getting better when the oil concentration is increased because more gas particles can bind contaminant molecules in the air.
012030
The following article is Open access
A Romadani and M F Rosyid
Understanding the missing matter problem in cosmological phenomena and scales of astrophysical is usually studied by modifying general relativity theory. In this article, we formulated the Kruskal-Szekeres coordinate of vacuum modified gravity model in f (R) theory. The generalization of the field equation was obtained by generalizing Hilbert-Einstein’s action with gravitational Lagrangian in terms of f (r)function. By consider a special class of f(R) theory by taking R = R0, we found the solution of static spherically symmetric spacetime that was known as de Sitter-Schwarzschild spacetime. The transformation rules were constructed from Kruskal-Szekeres coordinates in f (r)theory of modified general relativity to the Kruskal-Szekeres coordinate in general relativity theory. For λ ≈ 0, the Schwarzschild and Kruskal-Szekeres metric for static spherically symmetric on f (r)theory reduced to the standard Schwarzschild and Kruskal-Szekeres metric on general relativity. We also show the spacetime structure of de Sitter-Schwarzschild and Kruskal-Szekeres coordinate. This work could open a promising way to understand some features of a black hole in the f (r)theory of gravity.
012031
The following article is Open access
I Ismail, Z N Hatta, Mursal, Z Jalil and S H S Md Fadzullah
Coconut shell is one of the agricultural wastes that are widely available in Indonesia and other tropical countries. Unfortunately, the coconut shell waste has not been used optimally for new materials, especially for thermal insulation material. In this work, the composite from coconut shell particles using epoxy resin adhesives has been prepared. The particle sizes of coconut shells for composite samples were 60, 80, 100, and 120 mesh. The compositions of samples for each particle size (ratio between coconut shell and epoxy resin) were 70/30, 75/25, 80/20, and 85/15 (vol %). The thermal conductivity of each composite sample has been examined by using a single-plate method. The density of each sample has also been measured. The results showed that the thermal conductivity of composite sample for 60 mesh of particle size with 70/30 vol.% composition was 0.071 W/m K. As the composition of coconut shell was increased to 85 vol.%, the value of thermal conductivity decreased to 0.062 W/m K. It was found that the thermal conductivity of composite sample decreased as the composition of coconut shell was increased. For the composition of 70/30 vol.%, the thermal conductivity increased to 0.078 W/m K for 120 mesh of particle size. This behavior was also the same for other compositions, where the value of thermal conductivity of composite increased as the coconut shell particle size decreased. The density of the composite was found in the range of 0.799 – 0.938 g/cm3. As the particle size of the coconut shell was reduced, the density of the composite increased. This study revealed that both thermal conductivity and density of coconut shell epoxy composite are dependent on the particle size of the coconut shell. The thermal conductivity of all samples was less than 0.1 W/m K indicating that the coconut shell epoxy composite is quite potential for thermal insulation.
012032
The following article is Open access
D Tunjung, P Prajitno and D Handoko
Thermal Mixing Process, which is important in various industries, is a multiple-input multiple-output process (MIMO). It works by regulating hot-water and cold-water flows to control the temperature and level of the mixture. The Adaptive Fuzzy PID Control (AFPIDC) algorithm is a combination of two types of controller, has a simple PID basis with added Fuzzy aspects to speed up control. The AFPIDC algorithm is applied to the simulation of water thermal mixing process and is done with MATLAB/SIMULINK program. The fuzzy algorithm uses two inputs (errors & changes of errors) and has three outputs (changes of PID constants). The system is tested by simulating setpoint changes and adding disturbance. The testing result shows that AFPIDC controllers performs better than PID in controlling temperature and level. In temperature control, the PID settling time is 830 seconds, AFPIDC is 328 seconds and the PID overshoot is 6,3% and AFPIDC is 0%. In level control, the settling time of PID is 3221 seconds, while AFPIDC is 235 seconds, with PID overshoot is 10,5%, while AFPIDC 0%. From testing the system with leakage disturbance, the temperature controller needs time to regain stability at PID 780 seconds, AFPIDC 250 seconds. Meanwhile the level controlling stabilizes at PID 4510 seconds, and AFPIDC at 225 seconds.
012033
The following article is Open access
Desnita, Festiyed, P B Marsa, D Novisya and S Hamida
This study was aim to produce a valid instrument that can measure the quality of the context-based video of the sound. Instruments that had been developed include: physics learning expert validation instrument, physicist validation instruments, linguist validation instruments, teacher practicality instruments, student practicality instruments, critical thinking skills instruments, creative thinking skills instruments, collaboration skills instruments, and communication skills instruments both oral and writing. This research uses the ADDIE development model which consists of five stages. Data analysis for validity refers to the Aiken’s V coefficient where the instrument is valid if it is validity coefficient ≥ 0.6. The validation coefficient given by the expert for each instrument is as follows: the learning physics instrument 0.90, the physicist validation instrument was 0.91, the linguist validation instrument was 0.77, the teacher practicality instrument was 0.97, the student practicality instrument was 0, 87, instruments of critical thinking skills of 0.91, instruments of creative thinking skills of 0.93, instruments of collaboration skills of 0.99, instruments of oral communication skills of 0.98, and instruments of written communication skills of 0.90. All of instruments are valid, so the instrument can be used to measure the quality of the instructional video of sound.
012034
The following article is Open access
A M Sari, K Lahna, M Ramli, A Miura, K Kurihara, Marwan and N Idris
A new approach to allow detection of Cl emission using atransversely excited atmosphere (TEA) carbon dioxide (CO2) laser-induced breakdown spectroscopy (LIBS), namely utilization of a metal sub-target, was introduced. The Cl sample was prepared from pure chemical powder in the form of a solutiondeposited on the metal sub-target. A zinc selenium lens was used to focus the CO2 laser beam (10.6Mm, 2.5 J, 10 Hz, 200 ns) onto the deposited sample under the surrounding gas of helium (pressure of 1 atm) for generated luminous plasma. An optical multichannel analyzer (OMA) system was used for collecting plasma and acquiring the emission spectrum. It was found that luminous plasma can be produced upon focusing the laser irradiation onto the deposited layer of the sample on the subtarget metal while leaving no ablation from the sub-target metal. Many ionic emission lines from Cl can be detected in the visible region.The ionic emission lines occur withfavorable spectrochemical features, namely strong emission intensity and low background level. Thus, this new approach is promising for conducting Cl analysis using a CO2 LIBS.
012035
The following article is Open access
R Mitaphonna, M Ramli, N Ismail, K Kurihara, M Subianto, M A Gondal and N Idris
Preliminary evaluation of chemical component in soil impacted by 2004 Indian Ocean giant tsunami using LIBS has been carried out. The sampling of the tsunami impacted soil was carried out in several points in Aceh, Indonesia. In this study, the sample soil was pretreated to turn into pellets. The beam of a TEA CO2 laser (10.6 µm, 3 J, 200 ns, 10 Hz) is sent onto surface of pellet using focusing lens under air at atmospheric pressure for producing a plasma. The emission spectral lines from plasma that generated were discovered when testing with Optical Multichannel Analyzer (OMA) system. It shows many emission lines because of various elements could clearly be detected and be identified. It was found that both the tsunami impacted and unimpacted soil sample contain chemical signatures of tsunami event such as saltwater signal (Na), carbonate markers (Ca, Mg, Sr), terestrial markers (Fe, Mn, Si Ti, Ba), and other heavy metal elements. However, it is found that emission intensities of the spectral lines are far higher for the tsunami impacted soil samples compared to the case of tsunami unimpacted soil. The qualitative observation finding implies that the chemical elements such as calcium (Ca), then followed by magnesium (Mg), and sodium (Na) are good candidate for chemical proxies of tsunami event. Since the measurement allows to simultaneously observe these elements in a single measurement, thus LIBS is a potential, simultaneous, efficient, and versatile spectroscopic technique not only for analyzing chemical component in soil affected by the tsunami but also to identify the tsunami impacted soil from the impacted soilThe first section in your paper.
012036
The following article is Open access
H Ajrina, N Yuza, K Lahna, M Ramli, M M Suliyanti and N Idris
Cocoa seeds well known contains many antioxidant, thus it is really useful to human health. The elemental content of cocoa (Theobroma cacao L.) was examined using LIBS. The Cocoa seed was collected from Pidie Jaya Regency in the special autonomy region of Aceh, Indonesia. The examination was carried out is using LIBS using an Nd-YAG laser (Q-Smart 850 model, 1064 nm, 5.5 ns, 10 Hz). The laser energy was varied from 12 mJ to 70 mJ. The tested cocoa is dried first, mashed and shaped into pellets with a radius of 3 cm and a thickness of 0.5 cm. The laser beam was focused on the pellet surface under air surrounding gas. The surrounding gas pressure was also varied. The emission spectrum was acquired for various experimental conditions. It was found in the recorded emission spectrum that many inorganic elements can clearly be detected such as Al, Mg, Mn, Ca, K, P, Fe, Cu and also main organic elements such as H, C, N, and O. The emission spectrum is dominated by the organic elements of C, H, O and N. The emission spectrum features changes with energy and surrounding gas pressure. The plasma characteristics in term of temperature and electron number density was examined. This results shows that the minor and trace elements can detected be detected clearly along with main organic element in the cocoa seeds using the emerging analytical tool of LIBS.
012037
The following article is Open access
N Yuza, H Ajrina, K Lahna, M Ramli, M M Suliyanti and N Idris
A study was conducted for identification of heavy metal pollution from biological sample as a potential proxy of environmental pollution due to industrial waste. The identification was conducted using the emerging analytical tool, namely laser induced breakdown spectroscopy (LIBS). The sample was collected from seawater near a cement plant in Aceh. Samples is a conch shell. The sample was dried in the open air and then prepared in the form of a pellet. The analysis was made by generating a plasma on the pellet sample using an Nd-YAG laser with a wavelength of 1,064 nm which is focused with a lens that has a focal length (f = 15 cm) by varying laser energy under low pressure of 3 Torr of air surrounding gas. Emission from the generated plasma was transmitted to the Maya2000 spectrometer optical detector using an optical fiber and then the emission spectrum of each element is displayed on the monitor. The results showed that the snail shell contained the salts and heavy metal elements K, Pb, Gd, Se, Mg, Rb, Fe, and Xe. Thus, it can be concluded that the heavy metal elements Pb and Fe can be detected LIBS technique from the biological sample.
012038
The following article is Open access
K Harwati and J Rokhmat
The causalitic learning model is a learning model and is designed based on a causalitic thinking approach (causality and analytics). Based on the research results, the causal learning model can be used as an alternative learning model that facilitates the ability to think critically, creatively, solve problems, and increase student learning motivation. The purpose of writing is to develop learning tools (student worksheets) to improve the critical and creative thinking skills of junior high school students in learning the causalitic model. The research method used is 4D which consists of 4 stages, namely define, design, develop, and design. The results of this research is a special design of student-worksheets for physics learning with a causalitic-model for the material of heat and temperature for the student of junior high schools. Conclusion The resulting worksheets have unique characteristics such as loading phenomena with several elements of cause and effect, recommending the content of phenomena related to daily life, having a causality table, having space for explanations, using scaffolding, using language that is short, clear, easy to understand. understand, and use companion images of the phenomenon.
012039
The following article is Open access
Nurjamilah, J Rokhmat, H Sahidu, A Harjono and Hikmawati
This study aims to examining the effect of 1) the causalitic-learning model (CLM) on reasoning-ability (RA), 2) creativity on RA, and 3) the interaction between the CLM and creativity on RA. This research is quasi-experimental with a 2x2 factorial design. The population is all students of class X-IPA. Sampling uses purposive-technique with consideration of the ability and support of parents in facilitating students and obtained students of class X-IPA-3 (31-students) as an experimental class and class X-IPA-4 (30-students) as a control class. The data of RA and creativity were gathered by using four description-tests. The results show that the data is normally distributed and homogeneous as indicated by chi-square counted (10.87) < chi-square table (11.07), Fcount (1.57) < Fcount (1.85) (for RA) and Fcount (1.50) < Fcount (1.85) (for creativity). The hypothesis was tested using two-way ANOVA with the help of the SPSS 18 application. The conclusion is that in learning physics during the Covid-19 pandemic: 1) there is an influence of the CLM on RA, 2) there is an influence of creativity on RA, and 3) there is no interaction effect between the CLM and creativity on RA. Recommendation: In implementing a CLM to improve RA, it is better to use creativity-related phenomena in the form of pictures to facilitate students to do causality-thinking and argument formulation.
012040
The following article is Open access
H Fadhlurahman, A Salam and I Fachruddin
A nonrelativistic K−p interaction model is derived as one-hadron-exchanges. The exchanged particles are the scalar meson, the vector mesons, the hyperons, and the resonances Λ*(1600),Σ*(1385). The models parameters are determined by fitting to experimental data of spin-averaged differential cross section for kaon laboratory energy range of 51.27 MeV up to 376.87 MeV. We use a 3D technique without partial wave expansion to calculate K−p scattering.
012041
The following article is Open access
I A Anshori, J Rokhmat, I W Gunada, Wahyudi and S Ayub
The purpose of this study was to investigate the effect of the implementation of the Causalitic-learning Model (CLM) on Problem-solving Ability (PSA) in terms of creativity. This study used an untreated control group design with pre-test and post-test. The sampling technique used purposive sampling and obtained students from XI-MIA-3 as the experimental class (11 male and 22 female) and XI-MIA-2 as the control class (14 male and 20 female). The assessment instrument uses 6 items in the essay test in physics. Data analysis used a two-way ANOVA test with a 2 x 2 factorial design. The results show homogeneous data (Ftable = 1.75), and normally distributed (X2table = 7.81), for the control class and experimental class, Hypothesis test results, with a significance level of 0.05, obtained Ha (sig.-value 0.01) and Hb (sig.-value 0.01) so that Ha and Hb are accepted, while for Hc (sig.-value 0.80) so Hc is rejected. Conclusion CLM affects PSA, creativity affects PSA, and there is no effect on the interaction between CLM and creativity on PSA. It is recommended to improve students’ PSA through CLM and or the development of student creativity.
012042
The following article is Open access
A M R Dharmayanti, D R Munazat, D S Razaq, B Kurniawan, Q Mustaghfiroh, D Nanto and D Handoko
The series sample of Nd(1-x)Sr(x)MnO3 (x = 0; 0.5 and 0.1) has been prepared with sol-gel method. The elemental compound or chemical characterization of Nd(1-x)Sr(x)MnO3 (x = 0; 0.5 and 0.1) were obtain using Energy Dispersive X-Ray Spectroscopy (EDS). The EDS results show that the elements were all presents in the sample, which also verified that the sample has successfully synthesized. The Vibrating Sample Magnetometer (VSM) was used to measure the magnetic properties of the sample under room temperature. The results show that the material is all soft magnetic with the magnetization decrease as the temperature decrease.
012043
The following article is Open access
K Ain, M F Ulum, L Choridah, U Mukhaiyar, A D Garnadi, N H Setyawan and B Ariwanto
Electrical Impedance Tomography (EIT) has an advantage than another imaging systems in the medical field, they are safe, fast, and simple. The role of EIT is promising, so that it is necessary to develop electrical impedance tomography devices, especially in the biomedical field. we have successfully constructed a multi-frequency EIT system for biomedicine consisting of an oscillator, buffer, VCCS (voltage controlled current source), mux-demux, differential amplifiers based on Arduino Mega. The system succesfully has been tested to produce an image of conductors, insulators, and animal organs so that suitable for biomedical field.
012044
The following article is Open access
R M Sitorus, A Azhar, A B Cahaya, A R T Nugraha and M A Majidi
Spin transfer torque in a multilayer magnetic system can be understood in terms of interaction between a normal metal and a ferromagnetic layer on the multilayer, in which the interaction is characterized by the magnetic susceptibility. Most of experimental studies on this subject utilizes heavy metals, such as Pd and Pt, while a recent theory assumes a light metal as the normal metal. We aim to reconcile this discrepancy and achieve consistency with the experiments by studying magnetic susceptibility of Pd and Pt. We theoretically investigate the complex magnetic susceptibility of Pd and Pt by combining Tight-binding Approximation, Hubbard Model, and Density Functional Theory. We calculate a single band susceptibility for Pd and Pt. Our results show that the band structure is dominated by the d-orbitals and the susceptibility is enhanced by its large repulsive interaction.
012045
The following article is Open access
Y Prihhapso, A Achmadi, D Suryani, W Farhania, Nelfyenny and H Zaini
Holmium oxide glass filter has known to exhibit persistence absorption lines across the visible region. Due to these properties, a holmium oxide glass filter is used as a reference standard to calibrate the wavelength accuracy of a spectrophotometer. In this research, a system consists of a double-monochromator and a photomultiplier tube will be evaluated. Mathematical modelling is used to calculate the true value of the absorption lines of the holmium glass filter to compensate for the low optical resolution of the double-monochromator system. Measurement results are validated by comparison with the single-monochromator-order shorting filter system which has higher optical resolving power. Wavelength differences between double-monochromator and single-monochromator systems are better than 0.1% and within the expanded uncertainty of 0.32 nm. Therefore, the double-monochromator system is suitable to provide measurement traceability for the calibration of holmium oxide glass filters.
012046
The following article is Open access
U Farahdina, V Z Zulfa, M Firdhaus, E Endarko, A Rubiyanto and N Nasori
Above normal concentrations of leukocyte can indicate blood cancer in humans. This study uses a finite difference time domain (FDTD) based on the Ag nanostructure array experiment from previous study. The influence of leukocyte and blood medium and also Ag nanostructures dimensions the on the pattern of electric field distributions in Ag nanostructure arrays was described on this study. The electric field distribution and transmittance of Ag nanostructure arrays using different medium was analysed. The electric field in Ag nanosquare with side size 50 nm irradiated with electromagnetic wave at a wavelength of 350 nm has value 1.78 × 10−5 V/m and has the highest electric field value compared to the other dimensions and wavelengths of electromagnetic wave. The maximum difference value of transmittance Ag nanosquare array between blood and leukocyte is 8.06 a.u. This value is resulted from Ag nanosquare with side size 50 nm irradiated with electromagnetic wave at a wavelength of 250 nm. These result provide an initial interpretation of optimum wavelength of electromagnetic wave and size of Ag nanosquare arrays for therapy and detection of blood cancer.
012047
The following article is Open access
Y N Warodiah, J Rokhmat, M Zuhdi, Kosim and S Ayub
This study aims to identify preparation strategies a causalitic model of student-worksheet (SW) to improve students’ creative thinking ability (CTA). This type of research is a Research and Development with a 4-D model. The research procedure refers to the stages in the 4-D model, namely the stages of defining, designing, developing, and disseminating. The instrument used was the SW validation questionnaire with a Likert scale of 1 to 4. The data were obtained from the SW validation by a validator consisting of 2 expert lecturers and 3 high school physics teachers. The validation result is 86% with very valid criteria. Based on the values and validation criteria, the causal model SW to improve the creative thinking ability of students is suitable for use in learning. The SW preparation strategy includes curriculum analysis, making needs maps, determining the SW title, basic competencies and indicators of competency achievement, central themes, and assessment tools, as well as compiling materials, and paying attention to the SW structure of the eight sets of strategies, there are three are uniques, namely the second, sixth, and eighth steps.
012048
The following article is Open access
H Rezeki, J Rokhmat, Gunawan, M Makhrus and Wahyudi
This study aims to test the effectiveness of the causalitic model learning device to improve students’ creative thinking ability and problem-solving. The design of this study was a one group pre-test and post-test design with a purposive sampling technique so that 15 students were obtained. The research instruments used were lesson plans, preliminary assignments, student worksheets, with data collection tools in the form of tests of creative thinking ability and problem-solving. Data were analyzed using calculation of N-Gain.Thus, the implementation of causal learning tools to improve creative thinking skills and physics problem-solving students is effectively used in learning.For further researchers, it is necessary to increase the frequency or duration of learning so that students can better understand learning.
012049
The following article is Open access
R Layton, A B Cahaya, A R T Nugraha and M A Majidi
Recent experimental and theoretical studies on two-dimensional (2D) antimonene revealed that this material is expected to be a potential semiconductor for optoelectronics applications. Using first-principle density functional theory (DFT) calculations, we verify that the so-called α-phase monolayer antimonene is a direct-gap semiconductor. Its optoelectronic properties are then described in terms of electron-photon interaction. Within the dipole approximation, the dipole vectors and the oscillator strength of the electron-photon interaction in monolayer antimonene were calculated. It has been found that the optical transition at a certain electronic wave vector can be analyzed according to the value and direction of the dipole vectors. This work will be important to further obtain the optical absorption spectra of monolayer antimonene for various light polarization.
012050
The following article is Open access
M J Prakoso, A B Cahaya, A R T Nugraha and M A Majidi
When a material absorbs incident light, electrons can undergo an optical transition between valence and conduction bands depending on the frequency and polarization of light. In atomic-layered materials such as bismuthene, even a small change in its geometrical structure, e.g. from the buckled to puckered lattices, completely alters its electronic properties and, accordingly, its possible optical transitions. Since the strength and selection rule of optical transitions can be understood by analyzing the electron-photon dipole vectors, we calculate dipole vectors as a function of electronic wave vector between two quantum states in buckled and puckered bismuthene monolayers. We find that each of the bismuthene structures has its own, unique dipole vectors, implying a certain geometrical dependence of the dipole vectors. These materials are expected as a potential candidate for optoelectronics applications. Furthermore, one would consider applying various light polarization in these materials when the optical transition rules are well understood.
012051
The following article is Open access
Parno, N Mufti, K A Widuri and M Ali
Fluid dynamics is related to science, technology, and daily lives, but students’ understanding of the topic is considered not optimal yet. This study aims to investigate the effectiveness of experiential learning (EL) – STEM model with formative assessment (FA) in building the mastery of fluid dynamics and explore students’ difficulties. This is a mixed-methods research with an embedded experimental design with 34 grade XI students of high school in Malang, Indonesia, as subjects, which were chosen with purposive sampling. This research used dynamics mastering test instrument in the form of 18 reasoned multiple-choice question items with a reliability of 0.65. The data were analyzed with Wilcoxon Signed Ranks test, N-gain, and the description of students’ answers. The result showed that EL-STEM with FA is effective to build the mastery of fluid dynamics with the effectiveness of the subtopic of Bernoulli’s law is higher than the subtopic of Continuity. Before learning, students had difficulties to understand almost all material of fluid dynamics. However, after learning, students only had difficulties to understand certain things, which are the relationship between physical quantities in Bernoulli’s law, the distance between the water reservoir and the water jet, the speed of air under or above the wing of an aeroplane, and the shape of aeroplane’s wing design.
012052
The following article is Open access
A R T Nugraha, A B Cahaya and M A Majidi
When ultrashort laser pulses are applied to the solid-state material within a time scale less than the period of a particular phonon mode, the energy and momentum of the absorbed light are used by photo-excited carriers to interact collectively with the crystal lattices and generate lattice oscillations coherently, known as the coherent phonons. The Fourier transform of the absorption modulation due to the coherent phonon oscillations gives the coherent phonon intensity. In this work, we theoretically investigate the shape of coherent phonon intensity for transition metal dichalcogenides as a function of the polarization angle of the laser pulses. In particular, we focus on the E2g and A1g phonons in monolayer and bilayer molybdenum disulfides. Within the simplified theory of displacive excitation of coherent phonons, we find that the laser pulses uniquely select the electronic states in monolayer and bilayer molybdenum disulfides, resulting in a rich feature of the polar plots of the energy-dependent coherent phonon intensity of these materials.
012053
The following article is Open access
H Satria and S Soekirno
Particulate Matter (PM) is the main material commonly used to show the degree of air pollution. PM material has an impact on human health and the visibility of the atmosphere. Standard gravimetric measurements and current commercial instruments for field measurements are still expensive and limited at several points in Indonesia. In this research, a low cost PM2.5 and PM10 measuring instrument was designed, with the application of the Internet of Things (IoT) to support real-time monitoring. This instrument can be used to increase the spatial and temporal resolution of PM data. The system uses the ZH03A which has a correlation of 0.8936 in PM2.5 and 0.8873 in PM10 through comparison with standard instrument. Sensor data is processed by a data logger which is connected to the internet via the ESP8266 module. This module has sent data to the database with 0% data loss on testing and sent to display the actual PM2.5 and PM10 values in a website. The results showed a negative correlation on temperature and positive correlation on humidity. The measurement system has recorded the distribution patterns of PM coming from the northwest of Dramaga.
012054
The following article is Open access
D J Hidayat and S Soekirno
The population increase in urban areas is one of the primary reasons for changing the local climate, and there is a high impact on the surrounding areas. Due to rapid urbanization, natural land surfaces are being replaced by an artificial land cover which negatively impacts the ecosystem resulting in Urban Heat Island (UHI) effect. It has a detrimental impact on residential environments and implications for human health. Accurate UHI intensity information can be very helpful to take effective urban planning strategies. This research contributes to developing a temperature monitoring system based on the Internet of Things to support UHI information. The system is designed using a DS18b20 temperature sensor. Data from the sensor is processed by the data logger and sent to the server using the ESP8266. The system will process data from sensors into urban and rural temperature information and the UHI index. Besides, an Artificial Neural Network approach presented in this study for predicting temperature to anticipate the impact of increasing the UHI index. As a result, the system could be implemented to provide real-time information about temperature and UHI on the website. Sensor calibrated has a correlation coefficient R2 about 0.99996 and 0.99997 and data sent percentage 100% and temperature prediction using ANN were successfully made with acceptable accuracy of 85.1%.
012055
The following article is Open access
E Yudiarsah and T Adiansyah
This theoretical study aims to determine the electrical properties of poly(dA)-poly(dT) DNA molecule under influence of electric and magnetic fields as external disturbances. The electrical properties of the DNA is investigated using a tight-binding model in the second quantization form. Then, the Landauer-Buttiker formalism is used in calculating electric current from the transmission probability which is calculate using the green function approach. While the external interference is considered by modelling the magnetic dependent hopping phase and the electric field dependent hopping amplitude in the tight binding Hamiltonian. The calculation results shows that the electric field applied along the DNA decreases sharply the peak of the transmission band. This means that the electric field significantly weakening the quality of transmission in poly(dA)-poly(dT) DNA molecule. On the other hand, the increase in magnetic field results in the increment of maximum current and the decrement of threshold voltage.
012056
The following article is Open access
P Wellyantama and S Soekirno
To improve the quality and quantity of meteorological data over Indonesia, Meteorology Climatology and Geophysics Agency of Indonesia (BMKG) is continuously developing automatic weather observations. BMKG has 63 units Automatic Weather Station (AWS) and 165 units Automatic Weather Observation System (AWOS) both inside and outside the BMKG Station environment. To make the control of sensor conditions easier, especially for temperature, pressure, relative humidity, and rainfall sensors, an additional system is needed to monitor and warn when problems occur with these sensors. The correlation among weather parameters data is the key to monitoring the sensor condition, these data are going to be trained and tested with the Artificial neural network (ANN) method. Then, the sensor condition (normal or error indicated) can be well detected based on AWS’s data. The quality improvement of automatic weather station data is expected to increase the utilization of the data.
012057
The following article is Open access
N Alfiyati, N L Kartika and A R Nugraha
Calibration of line scale in the National Standards Measurement-National Standardization Agency in Indonesia (SNSU-BSN) is carried out by using one dimensional measuring machine (SIP machine) which traceable to the laser interferometer or laser interferometer itself. Although line scale calibrated using laser interferometer, the system needs SIP machine as linear movable carriage and SIP table as the base on line scale. Length measurement of the SIP machine covers only up to 400 mm and for line scale above 400 mm, measurement can be extended to 1000 mm using shifting methods. When the scale is shifted, the position of the last point of previous measurement might not be on the same position, even though it has been well alignment for the second measurement. There is an error due to a junction between position scale on the first measurement to the second measurement. This error is added to the uncertainty budget as a junction point error because of the shifting. This paper described how to determine an appropriate value that should be attached on the uncertainty budget. It was found the error value of junction point due to shifting method in line scale calibration is 0.42 µm and the expanded uncertainty of line scale calibration for 1000 mm is 2.5 µm.
012058
The following article is Open access
M T Rohman and Triyanta
The braneworld model provides a solution to the hierarchy problem in cosmology. Based on its thickness, braneworld models are classified into a thin brane model (RandallSundrum (RS) and the RS-like models) and a thick brane model. The thin brane model has a problem according to the zero-width brane and some fields localization. Meanwhile, thick brane is quite good in explaining fields localization and there is no problem related to brane thickness. In this article, we re-examine the thick brane in a modified gravity, that is f(R,T) gravity. The equation of motion for the y-dependence scalar field and the f(R,T) field equation for a conformally flat brane and Robertson-Walker brane are derived. We also investigate the localization of scalar field on the f(R,T) thick brane, for a specific f(R,T) form. As the results, the formulation of Robertson-Walker thick brane is obtained. It can be reduced and has similarities to the previous f(R,T) brane consideration. It has a possibility to trap the field ϕ(y) in a thick brane with specific conditions of brane’s scale factor. It was shown that the expanding or contracting universe affects the localization conditions of the scalar fields.
012059
The following article is Open access
F Ilham, D Triyono and M N Abdillah
The effect of Mg-small doped on the structural and electrical properties of LaFe1-xMgxO3 ceramic materials was studied. A series of LaFe1-xMgxO3 (x= 0.01 and 0.05) perovskite material was synthesized via sol-gel method following by sintering process. Structural properties were investigated by using X-Ray diffraction (XRD). Rietveld refinement analysis have been done using Fullprof software. All of the samples are single-phase with orthorhombic crystal structure and Pnma space group. Lattice parameter slightly increases as the Mg-doping concentration increase. The impedance spectroscopy of the sample was characterized by using the RLC-Meter at a frequency range of 100 Hz - 1 MHz at room temperature. The electrical parameters such as impedance, dielectric constant, tan loss, and conductivity was analyzed using impedance spectroscopy method. The value of the dielectric constant (∊) decreases with increasing frequency and remains constant at higher frequencies. The dielectric loss shows a decrease in the dielectric constant with increasing Mg doping.
012060
The following article is Open access
E Yudiarsah
The effect of an internal electric field built up along the Poly(dA)-poly(dT) DNA molecule on the electron transport in the molecule has been studied. The electric field dependent electron hopping amplitude has been used in the tight-binding Hamiltonian model of a Poly(dA)-poly(dT) DNA molecule. Green’s function technique is used in calculating electron transmission probability, which is then used for computing current as a function of voltage by employing the Landauer-Büttiker formalism. It is observed that the internal electric field can cause the current decreases with voltages. The current reaches its maximum at a lower voltage as the internal electric field increases.
012061
The following article is Open access
Y Cahyono, S Ramadhanti, S Fatimah, Rasmianti, Y N K Dewi and M Z Asrori
Synthesis and growth of CuO films have been carried out to be used as constituent materials for perovskite-based solar cells. The film was made using a spin-coating and heat treatment sol-gel method with variations in temperatures of 400 °C, 500 °C, and 600 °C, each for one hour. CuO films were then characterized using UV-Vis, XRD, and FTIR. The analysis was carried out to determine the effect of annealing temperature on the absorbance, thickness, gap energy, crystal size, crystallinity, and functional group bonds of compounds found in CuO films. In general, there is a decrease in thickness, and energy bandgap, as the annealing temperature is increased. Conversely, the absorbance, the mean grain size, and crystallinity increased as the annealing temperature was increased. The increase in grain size is one of the causes of decreasing energy bandgap when the annealing temperature is increased. Annealing treatment increases absorbance in the visible and the near-infrared spectrum (photons with lower energy levels). This is very advantageous as solar cell material. CuO film is planned to be used as a tandem for Barium Titanate (BaTiO3) to form a solar cell system.
012062
The following article is Open access
Y Cahyono, S Ramadhanti, Rasmianti, Y N K Dewi and M Z Asrori
The development of perovskite-based solar cells has recently attracted the attention of many researchers because the efficiency value increases rapidly in a short span of time. Third generation solar cells have the potential to achieve Shockley-Queisser Limit of 31% for single energy bandgap solar cells. Besides that, this solar cell technology is economically very promising because the manufacturing costs are cheaper. The main drawback of this solar cell is its low stability (lifetime), which is caused by degradation over its lifetime. In addition, most of the high efficiency perovskite-based solar cells still use lead (Pb), so they are not environmentally friendly. Another alternative perovskite material is required. One promising material is Barium Titanate (BaTiO3). As a material for solar cells, not much research has been done. BaTiO3 film has been successfully made, which is then given annealing treatment at temperature of 500 °C, with annealing time of 30 minutes, 60 minutes, 90 minutes, and 120 minutes. In general, increasing the annealing time increases absorbance, decreases film thickness, decreases energy bandgap, and tends to reduce grain size of film. Energy bandgap tends to decrease with the increasing grain size. The grain size of film decreases with the decreasing thickness. More in-depth characterization and analysis are needed, especially those related to microstructure analysis.
012063
The following article is Open access
A Zaenudin, Rustadi, Iswan and I B S Yogi
The application of horizontal to a vertical spectral ratio (HVSR) in Indonesia is often analyzed using theoretical equations that only focus on Vs. or the two rock layers’ thickness. On the other hand, there are already HVSR modeling programs that involve other parameters such as VP, density, QP, and Qs for multiple layers. Armed with existing modeling, the effect of each parameter and test the possible non-uniqueness of HVSR modeling is found. In the end, the right inversion method to get satisfactory results is found. Modeling is done by calculating the wave amplification of the transfer function, the phenomenon of attenuation, and dispersion. A synthetic model will be made from the modeling scheme, which is approached with various possible parameters using a random test of 200000 models for each test. From the existing parameters, it is found that only the parameters Vs, thickness, and Qs affect the position f0. Meanwhile, the parameters VP, density, and QP only affect the amplitude of the curve. The parameters VP, Vs, density, and thickness have a consistent relationship between parameters, but not for QP and Qs. From the various tests carried out, it was found that many combinations can produce similar responses, both parameter combinations, and combinations of parameters with a different number of layers. Inversion modeling is needed to produce a precise subsurface model that can reduce the non-uniqueness results, such as optimization with a global approach, a statistical approach, or a hybrid inversion method.
012064
The following article is Open access
A Hilmi, A M Ulfa, A Wijaya and L I Hadimi
Indonesia is an archipelagic country that has a larger ocean area than land, many people live in coastal areas and still experience difficulties in obtaining springs that can be used for their daily needs. This study was conducted to see the extent of seawater intrusion into a coastal aquifer in Labuhan Kertasari Village. The method of measuring Total Dissolved Solids, Conductivity, and Salinity is used in studying seawater intrusion into a coastal aquifer. Coastal aquifer samples were taken from open wells and boreholes belonging to residents which are actively used on a daily basis. Analysis of the relationship between TDS, conductivity and, salinity used simple linearity analysis, and distribution mapping using surfer 8. The highest TDS concentration, conductivity, and salinity were 5770 ppm; 8700 MS/cm; and 4600 ppm on the S8. While the TDS concentration, conductivity, and salinity were the lowest consecutively were 836 ppm; 1258 MS/cm; 700 ppm on S26. In general, the coastal aquifer in residents’ wells has experienced various intrusions and has decreased at a distance from the shoreline.
012065
The following article is Open access
R R H Dwimivanusa, D Triyono and M N Abdillah
In this study, material with x = 0.01 and x = 0.05 have been successfully synthesized using the sol-gel method. Characterization of the material was carried out by X-ray Diffraction spectroscopy (XRD), Ultraviolet-Visible Spectrophotometry (UV-VIS), and Fourier Transform Infrared Spectroscopy (FTIR). The XRD data of LaFe1-xMgxO3 was confirmed single-phase with orthorhombic structure and Pbnm space groups for all samples. The lattice parameter value increases with increasing Mg content, which is predicted due to the larger ionic radii Mg2+ successfully substituted Fe3+. The crystallite size indicated that samples were nano-scale particles. FTIR spectra confirm that the increased Mg substitution increases the distortion of LaFeO3 lattice, which correlates with XRD results. The UV-Vis characterization aimed to measure the optical bandgap energy. The optical bandgap energy value decreases with increasing Mg doping. Lower optical bandgap value makes a positive impact as promising candidates for photocatalytic applications.
012066
The following article is Open access
A A M Iqbal, D Triyono, Aflahannisa and I Purnamasari
The interest of LaFeO3 among perovskite inorganic materials increased tremendously due to their applicability ranging from chemical sensors, electrode material, etc. In previous studies, Bi-doped in La site improved the electrochemical performance and reduced the interfacial polarization resistance. Zr doped in the Fe site also improves electrical properties. In this study, LaFe0.97Zr0.03O3 and BiFe0.97Zr0.03O3 material have been successfully synthesized using the sol-gel method to observe the morphology and electrical properties in several temperatures. Characterization of the material was carried out by Scanning Electron Microscope (SEM), Energy Dispersive X-ray spectra (EDX), and Impedance Spectroscopy (IS). SEM results represent the non-uniform grain distribution morphology with estimated size to be 147 nm and 204 nm for LaFe0.97Zr0.03O3 and BiFe0.97Zr0.03O3, respectively. EDX characterization shows that the material is only composed of its constituent elements. The Impedance spectroscopy data show that BiFe0.97Zr0.03O3 better than LaFe0.97Zr0.03O3 in electrical properties because Bismuth ferrite (BiFe0.97ZrxO3) has multiferroics properties.
012067
The following article is Open access
Y S Putra, E Noviani, Nurhasanah, M Nurhanisa and A Azwar
A preliminary study of hydro-hydraulic energy on undular bores may support the invention of various kinds of technology related to renewable energy sourced from the potential of natural resources of Indonesia. Energy could be generated from one type of hydraulic jump that occurs in the river channel, namely undular tidal bore. The tidal bore phenomenon also exists in Indonesia, which occurs in the Kampar River, Riau, known as Bono. A numerical study of energy on wave-like tidal bore has been done for one type of bores, namely undular bores. The simulation of undular bores has been generated using the Computational Fluid Dynamics (CFD) approach assisted by the open-source CFD software, OpenFOAM which applied a turbulent model, namely one-equation Large Eddy Simulation (LES). The undular bores simulation in this study has been validated using experimental and numerical data from selected scientific references. Six simulations of undular bores have been performed based on six different values of Froude number, Fr = 1.04, 1.13, 1.20, 1.27, 1.34, and 1.41. Furthermore, the free surface of undular bores simulation was analyzed by emphasizing on the depth of upstream and downstream flows (d0 and d2 respectively). The rate of change of flow depth ( ), energy dissipation ( ), the rate of energy dissipation ( ), and hydraulic power dissipated of undular bores (PUB) will increase as a function of the Froude number.
012068
The following article is Open access
Glenno, I Fachruddin and A Salam
One of the KN Interaction is K+p interaction which one we’re interested in. K+p potential is described as one hadron exchanges. The hadrons being exchanged include scalar meson (σ), vector mesons (ω, ρ ), hyperons (Λ, Σ), and their resonances ( Λ* (1600), Σ*(1385)). This interaction model is derived for non-relativistic calculations within Blankenbecler-Sugar reduction. The values of the potential parameters are fixed by fitting to experimental data of K+p spin-averaged differential cross section for kaon laboratory energies from 88.13 MeV to 3683.22 MeV. Scattering calculations are performed by using a 3D technique without partial wave expansion.
012069
The following article is Open access
A Azhar and M A Majidi
Research about Heusler alloys have been massively conducted through experimental and theoretical studies due to their fascinating properties. Most of Heusler alloy compounds exhibit half-metallic behavior, in which one of the spin channels of such a material behaves as a metal and the other behaves as an insulator because there is an open energy gap at the Fermi level. On the other hand, the thermoelectric properties of the materials usually work well in the insulator or semiconductor phase rather than in the metal phase. Motivated by such interesting phenomena, we conduct first-principles study to explore the thermoelectric properties of Mn2Ge, one of Heusler compounds that exhibits half-metallic behavior. Our calculation results show that Mn2Ge of the spin-down channel has a high Seebeck coefficient and ZT value (electron part) at room temperature around 892 MV/K and 0.97, respectively. The positive sign of the Seebeck coefficient on spin-up and spin down indicate that the majority charge carrier in Mn2Ge are positive charges (holes).
012070
The following article is Open access
H Sahidu, Susilawati, M Zuhdi and J Rokhmat
This study aims to identify the types of analogy approaches required in learning physics and analyze physics scores of students based on gender and parent’s occupation. This research uses quantitative and qualitative approaches. Quantitative data is in the form of primary and secondary data. Primary data were collected using a questionnaire, while secondary data were from a teacher. Meanwhile, the qualitative data were collected using an open questionnaire. Quantitative analysis use using non-parametric statistics (Mann-Whitney) with the help of IBM SPSS version 24, while qualitative analysis is descriptive. The results of the study (with a significance of 0.05) showed that gender (sig.-value = 0.584 for PA and 0.874 for physical grades, greater than 0.05) and the type of work of parents (sig.-value = 0.303 for PA and 0.528 for physics scores, greater than 0.05) did not affect student responses about the analogy approach and to the students’ physics scores. Meanwhile, the the open questionnaire results generally stated that the students were happy, interesting, motivated, easier, clearer, more meaningful, more understanding of concepts, effective, and efficient in learning physics. The recommendation is that this analogy approach needs to be developed on other physics concepts and implemented in physics learning.
012071
The following article is Open access
M A Dipamanggala and H S Ramadhan
We study spherically-symmetric Einstein gravity coupled to nonlinear electrodynamics. In particular, we consider an exponential kinetic for of gauge field lagrangian. We found that the solution approaches Reissner-Nordstrom black hole asymptotically, but shows a distinct property near the origin.
012072
The following article is Open access
W Apriadi, H S Gani, P Prayitno, N Ibrahim and S K Wijaya
This work was concerned on development of the EEG acquisition and EEG signal processing by adding active electrodes and implementing multithread techniques. By using active electrodes, mounting them on the scalp surface would be easier to capture low signals of less than 1µV. The active electrodes were used to reduce noise when transfer signals from the electrode to the acquisition systems which equipped 20 gain. The verification was performed by comparing the active and passive electrodes using NETECH MiniSIM EEG Simulator 330. The advantage of this research was to reduce time delay for EEG signal computation on 32 channels. The acquisition system was based on Raspberry Pi and ADS1299 with multithread signal treatment. Signal filtering was performed into different threads and put all the EEG features into the database. A PC was used to process signal calculation such as processing FFT, signal feature extractions, and signal analysis. These calculations were divided into several functionally independent computations. The signals of each channel were calculated into different threads. The results of this work showed the effectiveness of the multithreaded method for processing large amounts of data (32 channels of 24 bits EEG signal) with low noise levels on the active electrodes.
012073
The following article is Open access
I Husnayani and M A Majidi
Graphite is one kind of materials commonly used in nuclear reactor as neutron moderator and structural material. During the nuclear reactor operation, graphite is bombarded with high dose of radiation, especially neutron. This condition can cause damage to the graphite’s crystal structure which then leads to the change of the graphite’s physical properties. The alteration of graphite properties is undesirable since it affects the operation and limits the lifetime of nuclear reactor. In this research, radiation-induced damages on graphite were investigated using molecular dynamic simulation. Reactive force-field potential was employed as the interatomic potential in a simulation box containing about five hundred thousand carbon atoms. The first cascade was initiated using primary knock-on atom having kinetic energy of 1 keV. Following the first cascade, multiple cascades were performed in the same simulation box to represent the long-term neutron irradiation on graphite and to observe the effect of this cascade repetition on defect production. The cascade simulation was performed at two variation of temperature. The number of defects was identified using coordination number analysis. It was found that the effect of temperature to the number of defects produced is not significant, while the repetition of cascade does increase the number of defects produced at the end of the cascade simulation.
012074
The following article is Open access
A B Cahaya and M A Majidi
In a spin-valve structure, the magnetizations of the ferromagnetic layer are influenced by the RKKY exchange interaction. The RKKY exchange interaction is an indirect exchange interaction mediated by the conduction electron of the non-magnetic spacer. The RKKY exchange interaction has been widely studied both theoretically and experimentally. However, the effect of the spin accumulation in the spacer on the exchange interaction has not been studied yet. While the spin accumulation in the non-magnetic spacer is generally small, recent experiment show that non-magnetic metallic layer in magnetic multilayers can have a large spin accumulation. Utilizing linear response theory, we discuss the effect of the spin accumulation on the spin density of the conduction electron in the spacer and show that the spin accumulation induces an anisotropic exchange.
012075
The following article is Open access
D L Saraswati, T A Sari, D Kameswari, S Solihatun, E D Sirait, D D Apriyani, Z R Alfi, D Nazelliana, V Ardy and N D Rahmawati
The purpose of this study was to see the effect of the TPS Cooperative learning method on physics learning outcomes in terms of student attention. The research method used was an experimental method. One group was used as the experiment group, namely the physics treatment with the TPS model, While the other group as a control group treated with a model of learning physics discussion. From each group then divided into groups that have high activity and low activity. Based on the results of the analysis, it can be ignored that there is no significant interaction effect between the TPS cooperative learning method and attention to physics learning outcomes. This can be proven where F_count < Ftable (3.289 <4.11) at a very significant level of 5%. which means that there is no significant effect between the Think-Pair-Share cooperative learning method with student attention. So that the Think-Pair-Share cooperative learning method is not appropriate to use to assess the level of student attention.
012076
The following article is Open access
A Rahmandita, D L Saraswati, N N Mulyaningsih, R Ningsih, L Agustina, T A Sari, Y Dinihari, Z F A’ini and E Wiyanti
The number of learning media at this time is still deemed insufficient that students can use to study independently anywhere and anytime. So we need a media companion to the main book that students can use, namely in the form of pocket books. The feasibility test was carried out by material experts, media experts, design experts and Senior High School Physics Teachers. the results of the product media expert test were quite good with a proportion of 70%, the material expert test was declared good with a proportion of 84%, the product design expert test was not good with a proportion of 64% and by education practitioners namely high school physics teachers declared good with a proportion of 88%. So that the overall feasibility of the product is 76.5% in the good category. So it can be concluded that the pocket book of Newton’s law material on Physics for class X senior high school students is in accordance with the appropriate syllabus and is suitable for use as a supporting book for learning physics.
012077
The following article is Open access
T A N Azhar, N N Mulyaningsih, D L Saraswati, N Nurhayati, N Marliani, F P Nursa’adah, N I Sari, I Lestari and N Nurjanah
The material of parabolic motion is one of the materials considered difficult by most high school students. Therefore, this study aims to analyze the parabolic motion with a contextual approach to throwing a basketball. The research method used was descriptive experimental, namely recording a video of throwing a basketball at a variation of the distance of 2 m, 3 m and 5 m from the thrower’s foot to the hoof. The video was analyzed using tracker software and the parameters measured were time of the ball to fly in the air, the farthest distance, maximum height and total velocity. The results obtained show that distance is directly proportional to time. The thrower was at a distance of 5 m from the foot of the basketball hoop represents more perfect parabolic motion. The conclusion is that basketball games can be used as a contextual approach to the parabolic motion material.
012078
The following article is Open access
B S Nugroho and Y Arman
We theoretically study two-photon Rabi oscillations (TPRO) in a nanocomposite comprising a semiconductor quantum dot (SQD) strongly coupled to a metallic nanoshell (MNS), which undergoes a pulsed excitation. The SQD is modeled as a three-level ladder-like quantum system (ground, one-exciton, and bi-exciton states). Its optical dynamics is described quantum-mechanically within the density matrix formalism framework, while the MNS is treated classically through its frequency-dependent polarizability. We find two effects of the presence of a MNS in close proximity to the SQD: (a) - a sufficient increase of the number of Rabi cycles as compared to the case of an isolated SQD and (b) - incoherent population of the one-exciton state giving rise to the destruction of the TPRO.
012079
The following article is Open access
R Adriat, Nurhasanah and R Perdhana
The concentration of ozone in the ozone layer is minimal, but it means a lot to live. The total amount of column ozone varies, mainly influenced by solar radiation and anthropogenic activity. In this study, the total column ozone during the Covid-19 pandemic, and the effect of UV radiation and CO2 concentration on Kalimantan’s island was reviewed. Based on the research results, it can be seen that on Borneo’s island in September and October 2019, the total column ozone reached 0.0056 J/m2. From November 2019 to March 2020, the total amount of column ozone decreased to 0.005 J/m2. The total amount of column ozone increased in April 2020 but declined in May 2020, and from June to September 2020, it increased to reach 0.006 J/m2. The numbers are related but not significant with UV radiation (correlation 0.25) and CO2 concentration (correlation -0.40). It can be concluded that UV radiation and anthropogenic activity affect the total column ozone.
012080
The following article is Open access
Katherine, R Rulaningtyas and K Ain
The use of medical images in diagnosing and analyzing various cases in the medical field is commonly used. In certain cases, the image used is not limited to two-dimensional images, but sometimes requires the use of three-dimensional images. CT scan image is an image that has several image slices that can be reconstructed into a three-dimensional image. In the reconstruction process, segmentation plays an important role to get a good reconstruction result and reduce the resulting noise. This study aims to develop a method used in CT scan image segmentation, with the hope that it can simplify the diagnosis process performed by doctors using two-dimensional images or those that have been constructed into three-dimensional images. The main method developed is the Otsu Thresholding method based on the threshold value, which is combined with the Hounsfield unit (HU) value which will be the input for the segmentation process. The image used is a thorax CT scan image with the final goal to get the results of heart segmentation. The results obtained based on the calculation of balanced accuracy for the 30 data tested had an average of 72.54%. The highest result of balanced accuracy for heart segmentation was obtained by data 4 of 77.43%, while the lowest result was obtained by data 29 of 69.1%.
012081
The following article is Open access
R Riries, Winarno, C N Asiah, A Y Putri, A B Suksmono, I S Sitanggang, N A Setiawan, A S Rahaju and E H Kusumastuti
Cervical cancer is an abnormal growth of cells found on the cervix. In general, cervical cancer is identified early by doing a pap smear test. However, this examination is still manually performed by doctors and the results are still subjective. Therefore, this study aims to determine the classification of Squamous Intraepithelial Lesion automatically from cervical single cells. The classification of those Squamous Intraepithelial Lesion includes normal cervical cells, Low-Grade Squamous Intraepithelial Lesion (LSIL), and High-Grade Squamous Intraepithelial Lesion (HSIL). We used Extreme Learning Machine (ELM) as a classifier and tried to compare the ELM’s performances with Backpropagation Neural Network method. We used 225 data and 3 classes include normal, LSIL, and HSIL. The classification was carried out by manual cropping and segmentation as the image pre-processing and the feature extraction was based on shape features consisting of Circularity, Semi Major and Minor Axis Length, Equivalent Diameter, Average Radius, and Compactness. This study concluded that Squamous Intraepithelial Lesion classification by using ELM had better performances than Backpropagation Neural Network. The highest accuracy result of 96.67% was obtained in Backpropagation training, while the highest accuracy in ELM’s training was 100% when both methods were tried by using 225 data.
012082
The following article is Open access
M S Rosid and E Ghufron
The permeable zone is one of the important parameters in the geothermal system. Its existence is influenced by fractures or faults generated within the geothermal reservoir. Due to the continuous influence of both high temperature and pressure, reservoir rocks are stressed and tend to cause a fracture. Unfortunately, some fractures are generally not continuous to the surface, so that geological data are not able to map out the presence of this structure. While the presence of the fracture zone greatly facilitates fluid mobility in the reservoir including heat transfer from the heat source convectively. Mapping the presence of a subsurface fracture zone is not easy. The study aims to identify the existing fracture zone through curve splitting analysis of MT data (magnetotelluric). The data used here is synthetic MT data. The fracture zone is a heterogeneous zone and anisotropy for EM waves. Splitting TE and TM curves will happen when the MT wave passes through this zone. The analysis of curve splitting provides depth penetration value. Therefore, the existence of fault as the cause of curve splitting can be mapped. From the results of forward modelling, the curve splitting approach can map very well the existence of the subsurface fault. For medium/rock resistive, the deviation of its dip value is only 1.36%. When the rock medium is highly conductive the deviation of its dip value up to about 3.48%. This is due to the absorption of EM waves by the conductive layer so that it is not effective in mapping the underlying layer.
012083
The following article is Open access
M S Rosid and C Sibarani
It was well known, the reservoir is one of the important parameters in a geothermal system. In general, a geothermal reservoir can be characterized as a graben structure with low to moderate rock density relative to its surroundings. Dieng is a geothermal field that is located in Banjarnegara and Wonosobo regency, Central Java province. The existence of a geothermal system in Dieng is identified by the appearance of surface manifestations such as crater and hot spring. This study was conducted to identify reservoir zones in the Dieng geothermal field using gravity data. To justify the location of reservoir rock, subsurface structure analysis using derivatives analysis which is the First Horizontal Derivatives (FHD) and Second Vertical Derivatives (SVD) method is done. The subsurface structure has an important role as the recharge and discharge zone of the geothermal system that aims towards and leaves the reservoir rock. Three-dimension inversion modeling is also applied because it is more objective and appropriate with the real condition rather than the forward method. The result of this study shows that ten structures are identified by the derivative analysis. The structures are dominated by normal faults. There are identified two grabens that are indicated as the two separated reservoirs in the South and center of the Dieng geothermal field. The results are verified by both geology and magnetotelluric data which have different characteristics and both reservoirs are separated by a low resistivity igneous rock that has been altered with the thermal effect of the surrounding reservoir.
012084
The following article is Open access
Y Arman and B S Nugroho
We performed molecular dynamics calculation to study hydrogen molecules’ diffusion in the voids of C2 hydrogen hydrate with varied occupancy at 291K and 4GPa. The same hydrate systems under pressure conditions of 76MPa to 174.2MPa at 77K to 150K were also investigated. LAMMPS molecular dynamics program is employed to the 3×3×3 unit cells with periodic boundary conditions of C2 hydrogen hydrate. TIP4P/Ice and three sites were used to model water molecules and the encapsulated hydrogen gas, respectively. The whole system was simulated for 10ns. The diffusion coefficient calculations show conformity with the experimental results, with the highest of 9.07 × 10−9 cm2s−1 shown by a system of 80% hydrogen gas occupancy under 291K and 4GPa of temperature and pressure, respectively. Hydrogen gases are actively diffuse between voids in every simulated system configuration.
012085
The following article is Open access
S A Reina, B J E Tito, M H Malini, F G Iqrimatien, E Sa’diyah and Aminatun
Ameloblastoma is one of odontogenic tumours that is classified as benign, aggressive, and destructive. Mandibular tumours potentially cause bone disruption or damage, so it is necessary to do a resection to remove the infected part. Treatment done by resection may cause defects starting from the gap in the alveolar bone to the discontinuity of the mandible. Thus, it is necessary to reconstruct the mandible using a scaffold. Scaffold is made by using the PLA 3D-printing with the Fused Deposition Modelling (FDM) method. PLA is non-bioactive and hydrophobic, so the surface needs to be modified by coating PLA with hydroxyapatite (HA) and gelatine. This article aims to examine the effect of PLA surface modification using HA-Gelatine through a review article. The searching strategy for articles is by using databases of internationally reputable journals with certain keywords. From the search, journals were obtained (with status Q3, Q2 and Q1) as reference journals in this review. Literature review shows that the addition of hydroxyapatite can improve the bioactive properties of PLA, while the addition of gelatine can increase its hydrophilicity properties. Therefore, HA-Gelatin coating on 3D PLA has the potential to be used as a scaffold for mandibular reconstruction.
012086
The following article is Open access
A R Aththibby, H Kuswanto and Mundilarto
This study was designed to increase student learning motivation by developing a basic physics practicum module on the topic of integrated augmented reality kinematics. This study uses the Analysis, Design, Development, Implementation, and Evaluation (ADDIE) development model. The subjects tested in this study were students of the physics education study program, at one of the universities in Lampung in academic year 2019/2020. The data collection instrument was in the form of a student learning motivation questionnaire. The data obtained were analyzed quantitatively. The results showed that the developed module was suitable for use in learning and practical activities and was also able to increase student learning motivation.
012087
The following article is Open access
K Lahna, S Ilyas, T K Bakri, M Ramli, H Nufus and N Idris
Preliminary optical spectroscopy studies have been carried out on betel nut samples using a new analytical tool, LIBS. The LIBS system consists of an neodymium -doped yttrium aluminium garnet (Nd YAG) laser as an excitation source, laser beam conditioning equipment, and an optical multichannel analyzer system (OMA system). Betel nut samples were collected from Aceh, Indonesia. The experiment was carried out under ambient air with a pressure of 760 Torr. It was found that strong luminous plasma could be generated directly from fresh betel nut samples, which resulted in strong emission spectrum. The emission spectrum obtained should have been dominated by host organic matter (C-H-O-N), but not as imagined because the organic host elements did not appear predominantly in the spectrum. Different treatments need to be carried out in further research so that the host organic matter appears. However, some salts, namely Mg, Fe, Na, Ca, Si, Al and K can be detected clearly. These initial investigations hold the promise of LIBS for spectral studies of betel nuts.
012088
The following article is Open access
S A Hakim, T Sembiring, K Sebayang, M Situmorang, K Tarigan, K Sembiring, S Mihardi and E N Waruwu
The purpose of this study is the characteristics of the indicator electrode which has been coated with a membrane with XRD, SEM-EDS, UV-Vis and FTIR. Research has been carried out using XRD, SEM-EDS, UV-Vis and FTIR tests on immobilized indicator electrodes 0.0350 g PVA-Enzyme coated with PVC-KTpClPB 0.0120 g and 0.0500 g. The method used was the biosensor potentiometric method with the urease enzyme immobilization technique in PVA coated with PVC-KTpClPB. To see the difference in the absorbance spectrum pattern of each PVA-Enzyme composition coated with PVC-KTpClPB against wavelength with UV-Vis, PVA-Enzim solution as a reference and PVC-KTpClPB solution as the first analysis 0.0120 g and as the second analysis 0,0500 g. To see the PVA-enzyme membrane coated with PVC-KTpClPB in the two compositions above was characterized by FTIR and SEM-EDS. To see the indicator electrode that had been immobilized by PVA-enzyme coated with PVC-KTpClPB in the two compositions above, it was characterized by XRD. It was concluded that the best results were found on the immobilization indicator electrode of 0.0350 g PVA-Enzyme coated with 0.0350 g PVC-0.0500 g KTpClPB.
012089
The following article is Open access
R Marjunus, Y N Handayani, A Stevani, N Febriyanti, I Firdaus and P Manurung
Ilmenite is one of the natural materials that are abundant in Lampung province. This research was conducted to determine the content of TiO2 from ilmenite Lampung by the leaching method. Previously, iron sand was mixed with sodium hydrogen carbonate (NaHCO3) and roasted at 700ºC for an hour. In this research, five samples were used to determine the TiO2 content of ilmenite Lampung, with variations in leaching time of 2, 3, 4, 5, and 6 hours at 110ºC. The acid leaching process was carried out using 12 M HCl with a ratio of 1: 4. Then the water leaching process was carried out using 50 ml distilled water. Furthermore, all samples were characterized using XRD and XRF to determine the content in Lampung ilmenite sand. In general, XRD analysis results have succeeded in increasing the rutile phase which is influenced by the heating temperature. The highest TiO2 content of Lampung ilmenite sand was obtained in samples with a leaching time variation of 2 hours at a temperature of 110ºC i.e. 60.701%.
012090
The following article is Open access
N Ernita, A Muin, N N S P Verawati and S Prayogi
This study aims to explore the effect of the inquiry learning model based on laboratory and achievement motivation toward students’ physics learning outcomes. This study is experimental research with a factorial design. The research sample used 2 class groups in one high school in the city of Mataram. The first experimental group used inquiry learning model based on real laboratory and the second experimental group used inquiry learning model based on virtual laboratory. Virtual laboratory using PhET simulation. The questionnaire of achievement motivation scale was used to measure the students’ achievement motivation, and a test was used to measure students’ learning outcomes focusing on cognitive aspects. The analysis of motivation scores and learning outcomes was carried out descriptively. Furthermore, the hypothesis testing use the Anova test where the prerequisite test in the form of normality and homogeneity test is conducted. The research results show that; a) there is no significant difference between the students’ learning outcomes who learn using the inquiry learning model based real laboratory and virtual laboratory; b) there is no significant difference between the students’ learning outcomes who have the high achievement motivation and low achievement motivation; and c) there is no interaction between inquiry learning model based real laboratory and virtual laboratory with the achievement motivation (high and low) on the students’ learning outcomes.
012091
The following article is Open access
R I Admi, S A Saptari, A Tjahjono, I N Rahman and W A Adi
In this research, structural engineering of lanthanum-manganate-based material was studied, starting with material synthesizing La0.7(Ca1-xSrx)0.3MnO3 with variation of x=0; 0.1; 0.2; and 0.3 using the sol-gel method as a microwave material. The effects of Sr substitution on the stucture, size of grain, and microwave-absorbing properties were investigated in detail by various analytical methods. Using XRD (X-Ray Diffraction) showed that the sample had single phase and orthorombic structure (space group of Pnma), substitution of Sr2 + ions did not cause changes in structure. Characterized using SEM (Scanning Electron Microscope) showed change in grain size which increase when given Sr substitution. Characterized using VNA (Vector Network Analyzer) in the 8-12 GHz range shows that the sample La0.7(Ca1-xSrx)0.3MnO3 with x=0 has been able to absorb up to 55.64% microwaves at 10.44GHz. The study concluded the material of La0.7(Ca1-xSrx)0.3MnO3 have a good potential to be a candidate of microwave absorbing materials.
012092
The following article is Open access
A W Putra, A Salam and I Fachruddin
The photoproduction of vector meson K*(892) on the nucleon has been investigated in the framework of the effective Lagrangian model by utilizing the Feynman diagram of the lowest orders in calculating the transition amplitudes. Beside the Born and the contact terms, we consider the Σ*(1780) as an additional hyperon resonance alongside with the Σ*(1385) in the M-channel. It is found that the Σ*(1780) has remarkable effects in the backward scattering region where there are still discrepancies between the theoretical predictions and the experimental data.
012093
The following article is Open access
E Kurniawan, N S Aminah and Harjana
Gambo as a traditional stringed musical instrument from Mbojo tribe (NTB) is increasingly missing its existence among the younger generation. This instrument has never been used as a media for learning physics, even though it can show the phenomena of vibration, waves and sound. This paper aims to explain the learning design of contruction the concept of natural resonance using a gambo system and involving advanced spectrum applications of smartphone and evidence the effectiveness of its implementation based on student understanding about the concept and its responses. The learning activity is guided inquiry which involves 28 senior high school students of Kota Bima grade XI. Data was collected through document studies and concept understanding tests. The results of test were analyzed using descriptive statistics and using the normalized gain test, while the analysis of student responses to learning activities used a likert scale. Based on studies and research results, it was concluded that the learning of the natural resonance concept of the string system using Gambo has been well designed and can be implemented easily and effectively. Understanding of students’ concepts increases significantly, and gets a good response from students.
012094
The following article is Open access
M Asy’ari, S Prayogi, B Mirawati, Syarifuddin, Hunaepi, Syahrir and Suhirman
This study aimed to produce physics learning tools based on inquiry that are valid, practical, and effective to improve students’ creative thinking skills on heat material. This study is a developmental research using the 4D (define, design, develop, disseminate) model. Learning tools in the form of syllabus, lesson plan, student activity sheets, student textbooks, and test instruments were validated by 2 experts before being implemented on 22 students. The research data were collected using instruments of validation, observation, questionnaires, and tests which were then analyzed descriptively and statistically. The results showed that the learning tools produced was valid in terms of content and construct, was practical based on the implementation of learning and student responses, and was effective in improving students’ creative thinking skills. Research findings based on indicators of creative thinking skills such as fluency, flexibility, originality, and elaboration are also described in this paper.
012095
The following article is Open access
S W Himmah, M Diantoro, N A Astarini, S K G Tiana, Nasikhudin, A Hidayat and A Taufiq
TiO2 nanoparticles have been widely studied as photoanode materials in DSSC due to the high surface area. Still, TiO2 nanoparticles exhibit weak light scattering which limiting red light absorption. On the other hand, one-dimensional structures such as rods demonstrate an increase in the light scattering. ZnO has undergone many structural modifications and exhibits higher mobility than TiO2. The combining characteristics of TiO2 nanoparticles and ZnO rods can improve photoanode performance. Therefore, the efficiency of DSSC can be increased. The TiO2/ZnO rods photoanodes were fabricated in the following steps. First, TiO2 nanoparticles were deposited on the conductive surface of ITO-Glass to form a double layer using the spin-coating method. Meanwhile, we prepare ZnO rods grown on the TiO2 nanoparticles layer using the hydrothermal method by varying Zinc Nitrate Tetrahydrate precursors (20; 30; 50; and 100 mM). Several physical characterizations have been carried out, including XRD, SEM, FTIR, UV-VIS, and Keithley SourceMeter 2400 equipped with a solar simulator 100 mW/cm2. Based on the results, the increasing concentration of Zinc Nitrate Tetrahydrate precursor affects the structural, morphological, optical, and electrical properties of TiO2/ZnO rods multilayer photoanode and reaches the optimum point at 50 mM.
012096
The following article is Open access
S L Wirma, Marzuki and Afrizal
This study aims to determine the magnitude of the disturbance due to CME on September 6, 2017, in the magnetosphere and ionosphere, then compare its effect at high, middle, and low latitudes. The data used are the daily variation of the H component geomagnetic and the ionogram, representing low latitude. Geomagnetic storms are indicated by the intensity of the H component of the earth’s magnetic field experiencing a very significant decrease reaching -250 nT, while ionosphere storms are indicated by an increase in the critical frequency the F2 layer by 14.1 MHz. As a comparison at each latitude, the magnitude of geomagnetic disturbance is represented by the K index. High latitudes have a K index greater than those at middle and low latitudes. Low latitude produces a smaller K index among other latitudes whose magnitude has strengthened the Dst index. The K index at high latitudes is 9, the K index at middle latitudes and low latitudes is 7. Based on the K index values at all latitudes, the northern hemisphere’s high latitudes are categorized as extreme storms, and the northern hemisphere mid-latitudes and low latitudes are categorized as strong storms.
012097
The following article is Open access
N Nasution, P Prajitno and D S Soejoko
Breast cancer is a very common cancer in women, affects millions of women each year, and is also one of the leading causes of cancer deaths among women. Early-stage cancer detection can reduce breast cancer mortality significantly in the long term. Breast ultrasound is a cost-effective and widely available screening tool. Breast ultrasound can be used for women who are at high risk of developing breast cancer but cannot undergo MRI examinations or for pregnant women who should not be exposed to X-rays, and also for women who have dense breast tissue. Although ultrasound is considered to be used for breast screening, its use is highly dependent on the doctor’s experience in reading the images. Therefore, to diagnose breast cancer using ultrasound images automatically can use computer assistance, namely Computer-Aided Detection (CADe). This study discusses a deep learning-based CADe system, namely the convolutional neural network (CNN), CNN is desired to evaluate several ultrasound images to make a microcalcification diagnosis. Microcalcifications are fine white spots, similar to grains of salt. They are not usually cancer, but certain patterns can be an early sign of cancer. Detecting microcalcification using CNN can be used as a routine breast screening, which can help doctors find signs of breast cancer earlier than is currently possible. The best MSE(Mean Squared error) loss value obtained is achieved at 0.24 with an accuracy of 0.76.
012098
The following article is Open access
Nurhidayah, M Peslinof, M F Afrianto, F Deswardani, T Restianingsih and J Pebralia
This study aims to test the temperature sensor that will be used in the biochar production furnace. Temperature testing is carried out to determine the ability of the sensor to respond to temperature changes that will be applied to the furnace. The sensors used in this system are the K-type thermocouple and the MAX6675 module. Testing is done by forming a control system. The system will be installed in the furnace by providing heating with fire in the furnace. The result of the maximum temperature was 574.25 °C at 575 seconds of heating for 1110 seconds. The test of corelation between the sensor output voltage to temperature when the temperature is raised from the beginning to the maximum, the sensor sensitivity is obtained at 5.1762 mV / °C and the slope of the graph is close to 1. Testing the relationship of the sensor output voltage to temperature when the temperature is lowered from the maximum point, the sensor sensitivity is obtained at 4.878 mV / °C and an offset voltage of 25 mV. The voltage-to-time correlation of the two tests is close to the value of 1, which means that the sensor linearity is very good so that it can be used as a temperature measurement tool.
012099
The following article is Open access
F A Wibowo and I Kambali
Scandium-47 is a promising particle emitter that has been suggested as a candidate for radiotheranostics. Thus, better understanding of optimum irradiation parameters, radioactivity yields and possible impurities during its production is of paramount importance. The theoretical calculation of the end-of-bombardment (EOB) results is performed using Microsoft Excel following the calculation of the excitation function obtained from the TALYS software and the stopping power obtained from the SRIM software can be accessed for free. According to the TALYS code calculations, the threshold energy for 47Sc production was 8.39 MeV, whereas the maximum cross-section (879 mbarn) occurred at proton incident energy of 17 MeV. The calculated EOB yield for 48Ca(p,2n)47Sc nuclear reaction at 60 MeV proton energy was found to be 449 MBq/μAh, which was suitable quality for typical radionuclide production. Besides, three radionuclides, i.e. 48Sc, 46Sc and 47Ca were predicted to be the main impurities in the 47Sc production. However, in order to minimize the production of 48Sc, 46Sc and 47Ca impurities radionuclide the safest and optimum proton energy should be between 23 and 30 MeV, which can be achieved using the available 26 MeV cyclotron. This study can be used as a reference for future 47Sc production when proton beams of up to 60 MeV are employed.
012100
The following article is Open access
A T Alaydrus, A Susilo, A Naba and S Minardi
The KEK Mandalika area, the southern coast of Lombok Island, is an area that is growing up in the tourism sector. The main need for tourist areas is the availability of clean water. The problem that occurs in coastal areas is seawater intrusion. The seawater intrusion can cause the changes in subsurface conditions, especially in groundwater. These changes have an impact on changes in subsurface physical properties, which can be detected by geophysical measurements and modeling based on geoelectric and gravity data. In monitoring the changes of subsurface conditions, it is necessary to observe the constraints based on the value of conductivity, density, viscosity, and fluid flow rate so that physical modeling can be carried out. The method used was an experiment with 11 mixed solutions of groundwater and seawater with different concentrations. The results show that the salinity, conductivity and density have a proportional relationship with viscosity. The higher the viscosity, the lower the groundwater flow rate, and vice versa. Based on these results, the value of the constraints for each variable is obtained, which is conductivity (1.930- 38) mS; density (0.995-1.021) kgm−3; salinity (1.06-25.1) ppt; viscosity (0.835-0.876) x10−3kgm−1s−1; fluid flow rate (1292-1388) ms−1.
012101
The following article is Open access
A N Ittaqa, S A Pawiro, A Riana, Misrawati, L D H A Mas’udi and D Hardiansyah
This study aims to identify the most important parameters in the Physiologically-Based Pharmacokinetic (PBPK) model of Peptide Receptor Radionuclide Therapy (PRRT). By knowing the size of the contribution of physiological parameters to the PBPK model, it can reduce the variability of the absorbed dose (AD) in organs at risk, such as the kidney and tumor between individuals. The small variability has the potential to increase the accuracy of planning individual radionuclide therapy treatments. This study uses the extended Fourier Amplitude Sensitivity Test (eFAST) Global Sensitivity Analysis method, the best variance-based global method in analyzing the PBPK model. A whole-body PBPK model that has been developed for treatment planning in PRRT therapy for meningioma patients (n = 7). The parameters of interest analyzed were organ receptor densities Rdens, organ flows f, organ release rates, and peptide binding rate. AD as the desired output from the eFAST algorithm by calculating Si and STi from each AD Kidney and AD Tumor. All parameters of interest are converted into the lognormal distribution. The sampling strategy based on eFAST sampling, the interference factor is equal to 4. To see the convergence of the convergence value of Si and STi, a simulation was performed with a total evaluation of 129, 257, 513, 1025, 2049, 4097, and 8193. The results of the simulation, inter-individual variability of tumor AD (coefficient of variation CV up to CV = 73%) was higher than that organ at risk (e.g. kidneys CV around 22%). Based on GSA analysis, the most important parameter determined the AD of tumors, tumors receptor density (Si = 0.8, STi = 0.93), kidneys AD was kidneys receptor density (Si = 0.66, STi = 0.71). After validating Si by fixing every parameter considered important, the results can reduce the CV of the kidney AD from 22% to 1%, with a decrease in CV presentation of around 95%. CV AD tumor 1 was reduced by 68% from CV 44% to 14%, and CV in tumor AD 2 from 72% to 17% with a reduced CV presentation of about 77%. It was concluded that receptor measurement is important because it can improve the accuracy of radionuclide therapy treatment.
012102
The following article is Open access
Widia, F Sarnita, A Irawan, Syafrudin, Armansyah, Nurdiana, Hunaepi, Sapnowandi, S Prayogi and M Asy’ari
This study aimed to describe the effectiveness of guided inquiry learning tools in increasing students’ creative thinking activities and skills. Student activities include: paying attention, formulating problems, hypothesizing, conducting experiments, recording observations, discussing, communicating results, and concluding, while creative thinking skills components namely: fluency, flexibility, originality, and elaboration were also identified in this study. The study used a one-group pre-test post-test design which was implemented on 22 students. Research data were collected using activity observation sheets and creative thinking skills test instruments. The results showed that the activity and creative thinking skills of students increased after learning, so it can be concluded that guided inquiry learning tools were effective in increasing students’ activities and creative thinking skills.
012103
The following article is Open access
O C Satya, Arsali, H Kaban, M Irfan, K Rahmasari, C Monica, D R Sari, N Alensi and P M Mandahiling
The daily rainfall prediction calculated from four Cumulus schemes i.e.: Kain-Fritsch (KF), New Tiedtke (NT), Grell 3D ensemble (G3D), and Betts-Miller-Janjic (BMJ) had been tested for compliance with daily observation data for 90 days (1 Dec 2018 to 28 Feb 2019) from three observer stations in Palembang city: BMKG-Kenten (Kenten), BMKG-SMB2 (SMB2) and Unsri Bukit Besar (UBB). The test results show that the BMJ cumulus scheme provides better suitability for 19 out of 45 unique indicators for rainfall event indicator (REI) groups and for as many as 13 out of 27 unique indicators for rainfall intensity indicator (RII) groups. The four schemes are able to provide the good performance for each on different indicators and stations, however, in general the BMJ scheme gives the best performance in predicting daily rainfall over Palembang city.
012104
The following article is Open access
Y Tiandho
The COVID-19 pandemic has changed various activities, including the learning process. The health protocol requires physical distancing, and learning activities in a “real” class are not allowed. Therefore, practicum has severe problems because students cannot carry it out in the laboratory. On the other hand, practicum has an essential role in learning physics. This paper aims to describe implementing kinematics practicum from home using the Tracker -video analysis software. The use of the Tracker software can help students carry out practicum independently quite accurately. The sample of this research is first-year students at the Faculty of Engineering, Universitas Bangka Belitung. The student was given several tutorials using Tracker via a video uploaded on Youtube. Furthermore, the student is given questions related to increasing understanding of kinematics, the accuracy of the practicum, and responses to the tutorials given. The majority of students welcomed this practicum and felt that they could improve their understanding of kinematics topics. Also, the practicum carried out has good accuracy. The use of Tracker can increase the frequency of use of digital devices and computers. Thus, we hope that it can improve the students’ skills related to Industrial Revolution 4.0 issues.
012105
The following article is Open access
Hikmawati, I W Suastra and N M Pujani
This study aims to describe local wisdom on the island of Lombok that has the potential for ethnoscience to develop a learning model at Junior High School. This research uses a qualitative approach. The data collection method is done by using observation, interview, documentation, and literature study. The results showed that local wisdom on the island of Lombok that has the potential for ethnoscience is Sasak Sade Village, Bau Nyale Tradition, Sesek Weaving, Gendang Beleq, and Poteng Reket. Sasak Sade Village has a traditional house using certain sizes, namely length (Sedepa), width (Sesata), and height (Sprunjung). The Bau Nyale tradition is the hunting tradition of Nyale (sea worms). Sesek Weaving has various motifs and philosophies, various preparation processes, weaving and finishing processes to traditional waste utilization. Gendang Beleq is a traditional musical instrument made of animal skin and the two sides are closed, when it is hit the sound will bounce off the other side and go through a damping process so the resulting sound will sound smoother. Poteng Reket is a conventional biotechnology product. This local wisdom that has the potential for ethnoscience can be utilized in the development of learning models, especially in science subjects at Junior High School.
012106
The following article is Open access
M Arsyad, P Palloan, J D Malago and A Suharna
Leang Lonrong Cave with underground river flowing in it is located in Maros-Pangkep karst area known with a high level of annual rainfall. That condition affects the surrounding environment including water discharge and subsurface mineral types. This study aims at analyzing the impact of rainfall on sub-surface mineral types around the area of Leang Lonrong Cave. The data used are rainfall intensity of Tondong Tallasa, Bungoro and Ballocci stations in 2015-2019 which are analyzed using Oldeman and Schmidt-Ferguson methods to find out the characteristics of rainfall occuring in Pangkep Regency. As for water discharge in June 2020 and rock resistivity data, they are examined using geo-electric method by Wenner’s through IP2Win and Res2DinV. The results of this study show that the area is dominated by wet months in November to April with rainfall intensity above 100mm per year and dry months which generally occurring in July to September where the others are considered as humid months with low water discharge flows in dry months. Moreover, the subsurface minerals are dominated by groundwater, clay and sand with resistivity extends from 0 to 27Ωm.
012107
The following article is Open access
W Indrasari, A S Budi and D P Fadilla
This research aims to produce physics teaching props for senior high school in the collision topic. The props developed to consist of Arduino as the central controller, photodiode sensor, and infrared sensor as a ball motion detector attached to the tube’s side as high as 100 cm. In its use, this teaching prop is also accompanied by student worksheets. The research design uses the Research and Development (R&D) method by using the 4D model, which includes: (1) define, (2) design, (3) develop, and (4) disseminate. Based on the media expert’s validation results, the score was 80% for concept suitability, 81% for design suitability, and 83% for effectiveness and efficiency. Therefore, the product worthy of use as a learning media.
012108
The following article is Open access
I K Wiratama, G N K Yudhyadi, M A Sayoga and M A Ramdani
Flow on the airfoil with deploying microtabs was performed to investigation aerodynamic performance airfoil modified with microtabs. Computer Fluid Dynamic (CFD) simulation has already been conducted to study the effects of heights deploying tab to the aerodynamic performance characteristics of airfoil sections. The aim of this study was performed to determine the effect of tab heights under variations of angle of attack againt the behaviour of stall airfoil and determine the effect of tab heights on the lift coefficient (CL) and drag coefficient (CD) on tab heights of 1.1% C, 2,2% C and 3.3% C for upper and lower surfaces airfoil. The angle of attach airfoil was from -4° to 32° with interval 20. From the results of CFD simulations showed that the addition of microtabs on the airfoil Wortmann FX63-137 for the lower surface had the effect of increasing the lift force and lift coefficient, the increase occurred consistently and stall occurred at an angle of 26° for tab heights of 1.1% C and 2,2%C while the tab height of 3.3% C a stall occurred at an angle of 20°. For upper surface, microtabs caused a decrease in lift force and stalls occurred at angle of 22° for all tab heights. The drag coefficient also increased under the increasing angle of attack with highest value was at tab height of 1.1% C of 2.542 and an angle of attack of 280, while on the lower surface the largest drag coefficient was at a tab height of 3.3% C of 2.73.
012109
The following article is Open access
W Indrasari, C E Rustana and Zulfikar
This study aims to produce practicum tools that can measure the speed of the air. This tool uses the HC-SR04 ultrasonic sensor module as a sound wave transmitter and uses the Arduino UNO as a control system. The research method used is ADDIE. After the product has been developed, it is evaluated by conducting a validation test. Based on validation results, this practicum tool’s suitability has also been validated by the media expert. The following is the score achieved from each of the indicators, distance and time measurement score was 75%, appearance of practicum tool data was 100%, and clarify the concept was 75%. Therefore, the practicum tools as learning media to measure the air’s speed are fit for use.
012110
The following article is Open access
J Sabaryati, L S Utami, A W Hasanah and S Viridi
Principle of minimum potential energy (PMPE) as one of the fundamental concept in physics and engineering will be used in this work to explain the phenomenon of buoyancy, why object with lower mass density can float on fluid with higher mass density, while object with higher mass density can sink in fluid with lower mass density. Before that some examples in mecahnics, e.g. object with different vertical position, object on incline, object with spring moving in vertical direction, and final condition of seesaw-like system, will be discussed to show the consequence of PMPE. Then, in the system of solid object and fluid, including the surrounding fluid with the object and treat them as a whole object or system we can easily show that the floating or sinking phonomena are simply a state where system potential energy is miniumum (both object and fluid). For simplicity, the theoretical demonstration will only use the form of block, where the other form, e.g. cylinder, sphere, cone, irregular form, are the matter of geometry difficulty only. Students engagement to the topic has not been performed but the instrument is proposed for future work.
012111
The following article is Open access
A Susilo, A T S Haji, B Suharto, Sunaryo, I W Suyadnya, C W Pramais and A H Rahman
Lenggoksono Beach Area which is a geomorphological region in the form of karst mountain located in the south of Malang Regency. This beach has beautiful scenery and presents unique and an interesting geosite conditions to be enjoyed. The purpose of this study is to inventory geodiversity data to fulfill the geotourism criteria and assess geodiversity data in the Lenggoksono Bay Area. The research method used was a survey and data collection method with 5 stages: data collection, criteria, assessment, interpretation, and clustering. The Lenggoksono Bay area has 5 landscapes, 4 beaches, islands, hills, and a river estuary. From the survey results, 6 types of rocks were found. Lenggoksono Bay was formed through the process of lifting the seabed containing limestone and coral reefs and igneous rock deposits over millions of years ago. These processes form the morphology and structure that has developed until present. The Lenggoksono Bay area has high value (4.4), where it contains scientific records, specific geological settings or landscapes. This is very meaningful, as an evidence of important geological events, and has special ecological functions that can be utilized for research, education, understanding of geological processes, and conservation. This area includes areas that comply the criteria to become geotourism.
012112
The following article is Open access
Suryajaya, Habibah, S Husain and N H Haryanti
In this paper, Cadmium Sulfide (CdS) nanoparticles (NPs) was synthesized using Liquid-Gas method. After CdCl2 mixed with surfactant in liquid phase, the mixture was exposed to S2 gas from brimstone. The solution changes color to yellow which means that the CdS NPs semiconductor has been formed. It was approved by the blue-shifted of the absorption spectra of CdS colloid solution then the size (radius) of CdS NPs would be determined by using the Efros equation. The radius yielded was about 2 nm. FTIR result also confirmed the CdS bond at 509 cm−1.
012113
The following article is Open access
Hiden
Mount Barujari is an active volcano on Lombok Island located within the Mount Rinjani Complex. This spot is suspected of having had a massive eruption, hence the spread of pumice, with deposits assumed to have buried previously existing royal sites. The phenomenon of the distribution of volcanic sediments, especially pumice deposits, has not been studied qualitatively and quantitatively concerning the eruption dynamics in this complex. Therefore, the purpose of this research is to analyze the spatial distribution of pumice to determine the plume column dynamics and effects of the Samalas eruption 1257, and it was verified by the Kelud eruption in 2014. The results showed that the ballistic terminal velocity without atmospheric effects was 914.09 m/s, while the impact velocity was 955.50 m/s. These are both equivalents to 2.69 Mach (supersonic speed), resulting in a huge eruption explosion, which is heard up to a distance of 3000 km, often caused by the drag coefficient. Furthermore, the calculated drag coefficient shows the dynamics of current plume flow, including the transition zone between stable (Stoke’s Law) and turbulent flow (Newton’s Law). Simultaneously, the Samalas eruption’s kinetic energy was established as equivalent to 7 on the VEI scale. Therefore, it is necessary to examine the magma Chambers and their dynamics in the future.
012114
The following article is Open access
A Doyan, Susilawati, L Muliyadi, S Hakim, H Munandar and M Taufik
The synthesis of the SnO2 thin film with doped materials of aluminum, fluorin indium, a combination of aluminum and indium, a combination of aluminum and fluorine, an a combination of the three doping agents, namely aluminum, fluorine, and indium have be successfully carried out. The purpose of this synthesis is to determine the effect of the vario doping materials on the resulting bandgap energy value. The thin layer was synthesized usi the sol-gel spin coating technique with the ratio of the base material and doping material us were 95: 5% and 85: 15%. The results showed that the higher the doping materi concentration, the resulting bandgap energy value decreased. In addition, the highest bandg energy value is found in the SnO2 thin film with indium doping, namely for direct 3.62 eV (9 5% percentage) and 3.59 eV (percentage 85: 15%), while the indirect bandgap energy value 3, 92 eV (percentage 95: 5%) and 3.67 eV (percentage 85: 15%). The lowest energy band g value is found in the SnO2 thin film with a combination of the three doping aluminum, fluorin and indium, namely for direct 3.50 eV (95: 5% percentage) and 3.41 eV (percentage 85: 15% while the energy band gap value is indirect. namely 3.81 eV (percentage 95: 5%) and 3.55 e (percentage 85: 15%). All the energy band gap range in semiconductor materials.
012115
The following article is Open access
N A Abdul-Manaf and A H Azmi
Bismuth Oxyiodide (BiOI) has been recognized as a suitable candidate of non-toxic material to replace lead in perovskite solar cells without reducing its performance. BiOI has been synthesized and deposited using modified successive ionic layer adsorption and reaction (SILAR) dip coating method at room temperature on the microscope glass, as a substrate. The microscope glass was dipped consecutively in 0.1M of bismuth(III) nitrate pentahydrate (BiNO3)2.5H2O diluted in nitric acid (HNO3) and 0.05M of potassium iodide (KI) in 50 ml deionized water. This process has been repeated for 30 times and finally the sample was dripped and dried in air. The sample was annealed at various annealing temperature from 350, 400, 425 and 450oC, for 1 hour. The physical observation, morphological and thickness of BiOI thin films have been characterized using field emission scanning electron microscope (FE-SEM) and surface profiler, respectively. From the physical observation, the as deposited BiOI thin film shows a thick layer with dark orange colour. The colour of the film changed to the orange-yellow after annealed at 350oC for 1 hour. It was observed that the film become more yellowish with increasing annealing temperature. SEM images demonstrated that the BiOI thin films have flakes morphology structure with the grain sizes around 1μm. The flakes agglomerates and formed a flower platelet. The agglomeration increased with higher annealing temperature and finally shattered when the BiOI was annealed at 450oC.
012116
The following article is Open access
R Wirawan, N Qomariyah, T Ardianto and D W Kurniawidi
In this study, analysis of radiation parameters (linear attenuation coefficient, mean free path and half value layer) of pumice constituent compounds was carried out. Analyzes were done on the compounds of Al2O3, Fe2O3, SiO2, CaO, K2O and Na2O with a theoretical approach using the XCOM program for gamma photon energies 57Co (0.122 MeV; 0.1365 MeV), 133Ba (0.356 MeV), 54Mn (0.835 MeV), 137Cs (0.662 MeV), 60Co (1.173 MeV; 1.333 MeV), 65Zn (1.1155 MeV), 22Na (0.511 MeV; 1.275 MeV) and 40K (1.461 MeV). The results show that the Fe2O3 compound has the largest linear attenuation coefficient, while the largest for MFP and HVL is Na2O among other compounds.
012117
The following article is Open access
Nazarudin, M P H Hasibuan, B Haryadi, Nurhayati, Ulyarti and Hadiyanto
Bioenergy is one of the renewable energies which is predicted to be a main energy in the next few years. It can play the important role to change the current fossil fuel-based energy into a green energy which has a low carbon footprint. A research about how to develop a bioenergy have been done by a lot of reseacher. However, especially in Indonesia, there is just few research to study about bioenergy from societal aspects poin of view such as the understanding and awarness of bioenergy among citizens. In this research, we have investigated senior high school students’ knowledge, perceptions, and attitudes interconected to bioenergy with online survery. The survey instrument used in the study was adopted from P. Halder’s study. The data was collected from students at senior high school th (SMAN 10) Jambi City. The results showed that the students awareness of bioenergy perceived from school, home, and social media have significant effects on their knowledge, perceptions and attitudes related to bioenergy. Among 211 students as respondent (N), we found 70.62% believe that they understand well the concept about bioenergy, 5.21% believe that they understand it very well, and the rest believe that they do not understand it. This understanding reflects to their willingness to use a bioenergy in their daily life, in which 71.70% respondents agree to use bioenergy, 25.47% respondents can not decide, and only 2.83% do not want to use it. To find the relationship among the variables, a multiple regression was conducted. A statistical analysis showed that the model for knowledge as a function of attitudes and perception does not fit the data therefore this model is rejected. However, both model for attitudes as function of perception and knowledge, and also perception as function of attitudes and knowldeges fit the data hence the models are accepted. In other words, attitudes of students who will use/not use bioenergy, is significantly affected by their perception about bioenergy.
012118
The following article is Open access
W Y W Yusoff, N F N M Lehan, N S Sobri, K Z K Ahmad, A Jalar and I A Rahman
Microelectronic packaging is frequently used in almost every application involving radiation-related industry. In the present work, the effect of the low dose gamma radiation on hardness and microstructural properties of Sn3Ag0.5Cu solder was explored using triboindenter test and optical microscope. The solder paste was placed onto the printed circuit board utilizing stencil printing method and reflow soldering process. The solder samples were exposed to the gamma irradiation with various low doses (from 5 to 25 Gy). Prior to indentation test, the sample undergoes the standard metallographic procedure. The hardness properties were determined through indentation test while the microstructureof the sample was observed using an optical microscope. In this study, indentation technique was used to understand the evolution of hardness properties of solder sample subjected to gamma radiation. The results show that the hardness increased after exposure to gamma radiation. However, the hardness decreased as the increment of radiation dose. Exposure to the gamma irradiation resulted the microstructure instability of solder joint which increases the intermetallic compound layer and reductionin the properties of hardness.
012119
The following article is Open access
E Supriyanto, A Subekti and D S B Prasetya
Thin titanium dioxide: gold (TiO2:Au) films are grown on n-type Si(100) substrates by spin coating, using 97% pure titanium (IV) isopropoxide [TTIP, Ti(O(C3H7)4] as a metal-organic precursor and powdered gold oxide (Au2O3) as a dopant. The Au2O3 was dissolved in tetrahydrofuran (C4H8O) to a concentration of 0.2 M, and this was then mixed with the TTIP in a 1:4 ratio. This experiment used a TTIP buffer layer to reduce lattice mismatch between the substrate and the film. The growth temperature was varied from 400°C to 550°C with an interval of 50 °C during deposition of TiO2:Au films, in which the experimental results show that the grown film exhibited rutile (002) (R (002)) crystal planes for all temperature conditions. In addition, while the films were grown at a temperature of 400 °C and 450 °C showed anatase (211) planes, the layers realized with a temperature of 450°C and 550°C exhibited rutile (200) planes. Increasing the amount of Au incorporation within a film will decrease its bandgap energy. The 500°C films showed a crystalline domain size in the R (002) plane of around 20.38 nm, making it a promising candidate base material for use in carbon monoxide (CO) gas sensors.