Papers
Metamaterials and structured photonic materials
075101
Can Yan, Jitao Li, Guicai Zhang, Ying Liang, Zijie Dai, Zhaojian Zhang and Jing Ye
High-quality (Q) resonances are critical for enhancing light-matter interactions in micro-nano optical systems, and achieving these resonances is often facilitated by bound states in the continuum (BICs), where energy is trapped within the resonant cavity without leakage. Moreover, quasi-BICs, arising from perturbations to the system, offer a viable alternative with ultra-high but finite Q factors that can be detected and utilized in real-world applications. This study explores the integration of BIC concepts into terahertz (THz) metasurfaces, specifically focusing on the Friedrich–Wintgen BIC (FW-BIC) mechanism, which allows flexible control over Q factors through resonance detuning and coupling manipulation. We design a metallic metasurface composed of a cut wire and coupled split ring resonators, traditionally used to achieve electromagnetically induced transparency, but show that tuning the coupling parameters leads to the realization of FW-BIC modes. The metasurface demonstrates a Q factor approaching 538, with notable performance in environmental refractive index, intensity, and phase sensing. The quasi-BIC peak also exhibits significant dispersion, with a maximum group delay of −302 ps, highlighting the potential for high-sensitivity THz sensors and fast-light devices. Our results open new avenues for the design of metasurfaces with enhanced light-matter interactions in the THz regime.
075102
Yi Quan, Chao Song, Xin Ge Zhang and Wei Xiang Jiang
Development of radar technology has driven the demand for advanced electromagnetic (EM) structures that not only can reduce radar cross section (RCS) but also enable efficient signal transmission as required. However, achieving a synergy between wideband RCS reduction and reconfigurable transmission on one platform remains a challenge, especially for the case where the incidence angle and polarization of EM waves are insensitive. Here, we propose a dual-polarized transmissive-reflective reconfigurable metasurface (TRRM) that enables real-time switching between in-band transmission and reflection modes while achieving wideband RCS reduction across entire operating frequencies in both modes. In such a metasurface, we use the diodes for dynamic EM transmission-reflection switching and incorporate curved-line miniaturized elements to enhance angular stability. To achieve wideband RCS reduction, the binary particle swarm optimization algorithm is adopted for the TRRM design. As a verification, a TRRM consisting of 6 × 6 subarrays is fabricated and measured. The results demonstrate that the TRRM can achieve reconfigurable transmission for incidence angles up to 50° and effective RCS reduction for incidence angles up to 30°. Our design provides a promising solution for radar related applications in complex and ever-changing EM environments.
075103
Guangbo Gao, Shilin Ma, Xianwu Mi and Xinyu Shan
A dynamically tunable metamaterial device (DTMD) with switchable functionality between broadband transmission and absorption is proposed, utilizing vanadium oxide (VO2) and graphene. By varying the conductivity of VO2 from 0 S m−1 to 200 000 S m−1, the device enables dynamic switching between broadband transmission and absorption modes. This device achieves broadband absorption exceeding 90% with an absorption bandwidth of 5.64 THz, ranging from 2.42 THz to 8.06 THz. In transmission mode, broadband transmission rates above 90% are achieved across the 2.28–8.98 THz spectra. More importantly, the proposed device operates as a bidirectional optical switch, demonstrating a maximum modulation depth of 99.99%, as well as polarization-independent operation and wideband characteristics. This DTMD holds potentialities for terahertz optoelectronic applications, including optical switches, modulators, and broadband absorbers, etc.
Letter
07LT01
The following article is Open access
Vasilios Cocotos and Andrew Forbes
Laser beams carrying orbital angular momentum (OAM), so-called vortex beams, are highly topical forms of light, having found a myriad of applications across diverse fields. The usual approach to their creation, either internal or external to lasers, imbues them with a size that scales with the topological charge, for an ever larger ring of light. Here we show that this need not be the case, demonstrating arbitrary topologically controlled beam sizes, from maintaining an OAM-independent size to exotic functional dependence. We use the opportunity to highlight inconsistencies in prior studies where OAM and size have been conflated for erroneous conclusions, and provide a framework for overcoming this.
Topical Review
073001
The following article is Open access
Takashige Omatsu and Srinivasa Rao Allam
Structured light beams, in contrast to conventional Gaussian beams, typically possess unique characteristics such as orbital angular momentum, exotic wavefronts and Stokes phase singularities in polarization textures. These characteristics have led to the use of structured light in applications including optical trapping and manipulation, free space optical and quantum communications, nano and microfabrication, environmental optics, and astrophysics. Furthermore, new classes of structured light fields, such as topological states of light (optical quasiparticles), and geometrical modes with particle-like and wave-like duality, are being applied across numerous scientific and practical applications. We review recent progress on the development of structured light laser sources based on solid-state laser technologies; in particular, we focus on the nonlinear optical processes which are used to expand their wavelength diversity.
Papers
Nanophotonics and plasmonics
075001
Shital Devinder, Saurabh Pandey, Neethu Baburaj, Shereena Joseph and Joby Joseph
This study presents a cost-effective approach to implement the guided mode resonance (GMR) sensors for refractive index (RI) measurements. A silicon nitride (Si3N4) GMR chip, fabricated using e-beam lithography and incorporating an in-house diffraction grating, is integrated with a low-cost CMOS sensor for optical readout. This system effectively detects variations in the GMR output corresponding to RI changes. Experimental results demonstrate a sensitivity of 2.02 mm RIU−1, derived from the linear regression slope of the CMOS intensity spot position against RI variations. This innovative combination of GMR and CMOS technologies not only reduces costs but also significantly simplifies the detection mechanism, opening new possibilities for optical sensing applications.
075002
Fumeng Qin, Yongpeng Ren, Desheng Qu, Yiping Sun and Chunlei Li
A refractive index sensor based on a metal–insulator–metal waveguide structure is designed. The magnetic field distribution characteristics and transmission spectra of the structure are investigated by the finite element method. The results demonstrate that the triple resonance peaks can be independently tuned. The sensing performance of the structure is analyzed by varying the structure parameters and refractive index. The sensitivity of the three resonance peaks is up to 2000 nm RIU–1, 2420 nm RIU–1 and 2870 nm RIU–1, respectively. In addition, the concentrations of glucose, ammonium chloride and sodium chloride solutions are simultaneously detected using this structure. It is demonstrated that this structure can achieve triple independent tuning and can measure three physical quantities at the same time, which provides an important idea for designing high sensitivity refractive index sensors.
075003
Yuhan Yang, Shengyan Fan, Yifan Li, Ye Zhang, Zihan Wan, Wei Ke, Yilong Cui and Tingting Liu
Over the past decades, there has been significant progress in imaging technology based on metasurfaces. The amount of optical information that can be stored on metasurface has increased continuously, evolving from static imaging to dynamic imaging. In this article, a three-channel dynamic switching imaging metasurface based on the phase-change material
has been proposed, where three images are captured at the interface of the metasurface, the near field (Fresnel region), and the far field (Fraunhofer region), respectively. Thanks to the significant differences in their optical properties between the crystalline and amorphous states of the
material, dynamic imaging and hiding capabilities have been demonstrated by temperature-controlled switching of the material state. By employing the Adam optimization algorithm to systematically tune the parameters of
meta-atom, coupled with rigorous validation through finite-difference time-domain simulations, we successfully demonstrate tri-channel dynamic imaging with low crosstalk, high resolution, and exceptional contrast ratio. This design provides an efficient platform for dynamic optical display, information encryption, and multifunctional integration with promising prospects in image display, information security, and optical storage fields.
Biophotonics
075301
Huan Zhang, Beiju Huang, Zanyun Zhang, Zan Zhang, Lei Bao and Yiyang Xie
Optical biosensors based on slot microring resonators (SMRRs) offer an attractive approach for refractive index (RI) sensing owing to their strong confinement and high sensitivity. In this paper, we propose a silicon nitride sandwich-SMRR (SSMRR) biosensor with enhanced sensitivity for RI sensing. A sandwich-slot waveguide is designed by adding a sandwich layer into the slot waveguide, which further increases the optical power and intensity in the slot area due to discontinuity of the electric field, and afterward strengthens the interaction between the optical field and sensing materials. The optical field and transmission spectrum are optimized by adopting a variational finite-difference time-domain method. As a result, the wavelength and intensity sensitivities of the SSMRR biosensor are 585 nm RIU−1 and 3341%/RIU, which are 48.10% and 63.75% higher than those of the SMRR biosensor with the same dimension except the sandwich layer, respectively. The optimum Q factor and intrinsic limit of detection are 1.27 × 104 and 3.87 × 10−4 RIU−1, respectively. The feasibility of biosensing experiments and broadband operation are also discussed. This work will provide an alternative approach for designing highly sensitive optical biosensors based on waveguides and MRRs in the future.
Light-matter interactions
075401
Lukáš Klein and Karel Žídek
A single-pixel camera offers an alternative method for image acquisition by using a series of modulation patterns on the scene. When combined with compressive sensing, it can significantly reduce the number of required measurements to reconstruct the image. Various modes of spatial modulations in compressive imaging can vastly affect the measurement quality and reduce the number of measurements needed. While previous studies have explored various modulation approaches, they often examined only a limited subset under inconsistent conditions. In this work, we provide a thorough comparison of the performance of 20 different modes of modulations and their modifications using a unified testing scheme. These were implemented via a digital micromirror device (DMD), and the DMD-modulated light was collected into an optical fiber. First, we evaluated the modulation patterns through simulations to study the impact of noise on image reconstruction. Next, we experimentally tested the entire set of patterns using the previously developed dual hyperspectral compressive microscope. We observed that the experimental results were highly affected by the diffraction on DMD, which highly depended on the character of a pattern. To ensure a thorough analysis, all modulation modes were tested on three different samples and at three distinct resolutions. Additionally, we identified individual challenges and limitations associated with specific modulation modes, offering practical insights for their testing and application. This study provides valuable guidance for optimizing modulation patterns in compressive imaging systems.
075402
The following article is Open access
Alexander C Trowbridge, Ewan M Wright and Kishan Dholakia
Light, or electromagnetic radiation, is well known to possess momentum, and the exchange of this momentum with a reflecting surface leads to radiation pressure. More often than not, it is the radiation pressure generated by a plane wave incident on a flat mirror that is considered. The last few decades have seen the emergence of structured light beams that may possess a complex phase and amplitude structure in both their transverse and longitudinal directions. This paper provides a historical overview of radiation pressure, tracing its discovery and experimental validation, and examines the influence on it transitioning to structured light from a plane wave. In particular, we elucidate the difference in radiation pressure force for structured light fields and how this differs from that of a plane wave at an identical frequency. In particular, the well-known Gouy phase is shown to contribute to a reduction in the radiation pressure force exerted on a flat mirror in comparison to a plane wave for both HG and LG modes. As an illustrative example, we compute that the radiation pressure force for LG modes differs from that of a plane wave by approximately 20 fN W−1 for each unit of orbital angular momentum. A detailed experimental proposal to quantify this variance in radiation pressure is described, and we demonstrate that this measurement is within the realm of current metrological techniques.
Nonlinear and ultrafast optics
075501
Shuai-Lin Liu, Xi Peng, De-Sheng Zhao, Yuan-Zhuang Bu, Xi-Ran Zhu, Lin-Yong Yang, Bin Zhang and Jing Hou
We demonstrate a burst-mode fiber laser system based on an active fiber loop (AFL) to generate high power GHz tunable burst-mode fiber laser. By flexibly adjusting the delay time in the AFL, the intra-burst repetition rate is continuously tunable from 0.89 to 2.25 GHz. The width and shape of the burst-mode envelope can be adjusted by acousto-optic modulator (AOM) and amplifier gain in the AFL, respectively. The repetition rate of the burst-mode fiber laser is 10 MHz. Amplified by a cascaded fiber amplifier, the burst-mode fiber laser achieves the output of 215.4 W at 6 ns of the burst duration. The laser system provides a new scheme for realizing high power GHz tunable burst-mode fiber laser output.
075502
Lj Stevanović, M Perić and V Pavlović
The optical properties of the CdSe/ZnS spherical core/shell quantum dot (CSQD), related to the laser-driven transitions
and
, are the subject of this study. We investigate in detail how transition energies, oscillator strengths, imaginary and real parts of the total, linear and third-order susceptibilities change with the variation of the model parameters, such as CSQD radius, core radius, relaxation rates and laser intensity. The energy levels and wave functions, needed for the calculations of the model parameters, were obtained by solving the radial Schrödinger equation in the effective mass approximation with the corresponding boundary conditions. The interaction of CSQD with laser light was studied in a density matrix approach using a two-level model and, for the first time, a five-level model. Optical Bloch equations were derived under dipole and rotating wave approximations and solved in the steady-state regime to obtain an analytic expression for susceptibility. Special attention was paid to the cases in which nonlinear susceptibility prevailed over linear susceptibility, leading to the appearance of the window in the absorption peak. It was found that susceptibility is more sensitive to the change in the core radius than to the change in the CSQD radius and that a greater laser intensity is needed to change the nature of the absorption and dispersion curves for
then for
transition.
075503
Spencer W Jolly, Julien Dechanxhe and Pascal Kockaert
The non-intuitive spatiotemporal modal content of space-time optical vortices (STOVs) is calculated in a graded-index fiber supporting a large number of propagating modes. We discuss how a fiber supporting many modes allows to truly couple higher-order STOVs, the number of modes necessary to support a STOV of a certain order, and conversely the truncation effect in a few-mode fiber. Based on the excited modes and their temporal profiles, we show numerical results for the linear and nonlinear propagation of STOVs in multimode fibers, specifically the linear space-time beating at short propagation distances, and the nonlinear trapping effect between modes producing stable states on long propagation distances. Our results underline how STOVs present a rich platform for multimode nonlinear optics and technology.
Propagation, diffraction and scattering
075601
Muhammad Waqar Iqbal, Ziad Rustom, Nicolas Marsal and Germano Montemezzani
We experimentally and theoretically investigate double-pass semi-cavities incorporating different types of retroreflectors and an optically biaxial crystal (BC). Our study focuses on the conical diffraction (CD) patterns that arise in these configurations and on their analysis by means of an unfolding procedure. The latter allow to reduce the complex light propagation in each semi-cavity to a sole forward propagation through a corresponding cascade of two properly oriented BCs. This approach enables a clear theoretical prediction of the vectorial CD patterns observed experimentally. We further analyze the impact of polarization filtering and of the insertion of a lens in the semi-cavity feedback loop, showing how these elements are modifying the resulting diffraction structures. The excellent agreement between theoretical model and experimental results highlights the robustness of our method in describing CD under feedback conditions. This work provides essential insights into the behavior of light in BC-based optical cavities and lays the foundation for studying more intricate cavity designs involving wave propagation along the optic axes of biaxial media.
075602
Tomasz Radożycki
The phenomenon of Poynting backflow in a single vector Gaussian beam is examined. The paraxial Maxwell equations and their exact solutions containing terms proportional to the small parameter
, or to its square, where w0 is the beam waist, are made use of. Explicit analytical calculations show that just these additional expressions are responsible for the occurrence of the reversed Poynting-vector longitudinal component for selected polarizations. Concrete results for the time-averaged vector for several Gaussian beams with n = 1 (n being the topological index of the beam) are presented. Depending on the choice of polarization, the backflow area is located around the beam’s axis, has an annular character or is absent. In the case of n = 2, backflow areas were found as well. The magnitude of the backflow proved to be proportional to ɛ4.
075603
The following article is Open access
B Kumar Das, C Granados Buitrago and M F Ciappina
Perfect optical vortex (POV) beams exhibit unique spatial characteristics, including a topological charge (TC)-independent ring radius and an annular intensity distribution. We investigate the propagation of POV beams in a chiral medium. Within the paraxial limit, an analytical expression for the complex amplitude of a POV beam propagating in a chiral medium is derived based on the Huygens–Fresnel integral and the ABCD matrix formalism. Our results show that the beams split into left-circularly polarized POV (LCPPOV) and right-circularly polarized POV (RCPPOV) beams, each following distinct propagation trajectories and exhibiting different longitudinal intensity distributions in the chiral medium. We numerically study the influence of various beam and medium parameters-such as the TC, the ratio of the ring radius to the half-ring width, the chiral parameter, and the refractive index-on the longitudinal intensity distributions of LCPPOV, RCPPOV, and total POV beams. We find that both non-diffracting and self-focusing effects occur at different propagation distances for LCPPOV, RCPPOV, and total POV beams. The self-focusing effect gradually diminishes as the ratio of the ring radius to the half-ring width decreases. Additionally, while the TC has no impact on intensity distributions during the non-diffracting stage, noticeable effects emerge in the self-focusing stage, including the expansion of the dark core with increasing TC and the appearance of multiple rings in the intensity distributions. Furthermore, the chiral parameter and refractive index influence the intensity distributions of LCPPOV, RCPPOV, and total POV beams in distinct ways. Our findings may be useful for applications of POV beams in optical micromanipulation.
075604
Lianghaoyue Zhang, Wei He, Zilong Zhang, Suyi Zhao, Yuqi Wang, Lingyu Kong, Yunfei Ma and Changming Zhao
Laser transverse mode analysis is of significance for laser applications. In beam quality analysis, the M2 factor measurement is commonly used. However, it only reflects the transverse mode orders and can hardly represent the detailed information of laser field. In contrast, mode spectrum analysis provides a more comprehensive solution for laser mode analysis. At present, some research has utilized deep learning techniques to conduct mode spectrum analysis on vortex beams and Hermite—Gaussian (HG) beams. Nevertheless, there is a lack of research in the area of the recognition performance of deep learning when dealing with a large number of structured light beams. Here, we propose a novel multi—convolutional neural network integration method for analyzing the mode spectra of thousands of complex structured lights widely obtained from laser cavities. Based on the coherent superposition of HG eigenmodes, more than 1900 unique complex structured laser patterns are generated and divided into seven groups for parallel recognition by seven convolutional neural networks, effectively addressing the challenge of distinguishing highly similar mode patterns. The experimental results show that our multi—network scheme achieves high—precision mode spectrum analysis when analyzing 1924 simulated mode patterns with various distortions, with an accuracy rate exceeding 93%. It also demonstrates precise recognition ability for experimentally generated mode patterns. On the GPU RTX 4090D, the analysis time for each mode is approximately 11 ms. This method can obtain a complete analysis of the mode components of structured laser beams through only one intensity acquisition, providing a fast, simple, and cost—effective real—time mode spectrum analysis method for fields such as high—capacity optical communication, beam shaping, and beam quality evaluation.
075605
Qianyu Hu, Xi Tang, Mingfeng Xu, Yuhan Zheng, Qingji Zeng, Feifei Zhang, Fei Zhang, Yinghui Guo, Mingbo Pu and Xiangang Luo
Traditional digital edge detection methods have limitations in terms of computational speed, energy efficiency, and performance under high-resolution or low-latency conditions. To address these challenges, we present an optical edge detection approach using a 4f degenerate cavity laser system. By applying vortex phase modulation at the Fourier plane, our method enhances the high-frequency image components to improve edge detection accuracy. Simulations demonstrate that within the degenerate cavity architecture, phase modulation achieves superior edge detection performance compared to amplitude modulation, exhibiting enhanced image fidelity, contrast, and noise suppression capabilities. First-order vortex phases effectively extract standard edges, whereas second-order phases improve curved edge detection. Testing under noisy conditions confirms robust performance with minimal efficiency fluctuations. Compared to conventional techniques, the proposed system offers superior edge clarity, lower energy consumption, and broader operational adaptability. These results highlight its potential for integration into compact optical processors, particularly for real-time applications such as autonomous vehicles and medical imaging. This work provides an efficient and low-energy alternative to traditional methods, advancing the development of integrated optical image processing systems.
075606
Pranay Mohta, Abhinandan Bhattacharjee and Anand K Jha
Accurate measurement of the spatial coherence function is critical for applications ranging from imaging to communication. However, accurate measurement of arbitrary complex spatial coherence function still remains a significant challenge. In this work, we present a phase-shifting wavefront-inversion and shearing interferometric technique which enables direct, noise-insensitive measurement of the complex cross-spectral density function for a very broad class of fields, which includes all spatially stationary fields and the physically most relevant class of spatially non-stationary fields. By integrating the phase-shifting technique with wavefront inversion interferometry, we implement an intensity difference protocol that eliminates all phase-insensitive noise, significantly enhancing measurement fidelity. Experimental results validate the method’s robustness and accuracy, demonstrating its applicability to both stationary and non-stationary fields, and extending its utility to single-photon-level measurements. This technique represents a promising tool for all coherence-driven applications.
075607
V V Kotlyar, A A Kovalev, A G Nalimov and A M Telegin
Exact analytical expressions for the density of the longitudinal projection of the orbital angular momentum (OAM) vector in the sharp focus plane are obtained in this work. We derive expressions of four light fields with uniform and non-uniform polarizations: an optical vortex with elliptical polarization, a superposition of a cylindrical vector beam and a beam with linear polarization, an optical vortex with cylindrical polarization, and a beam with non-uniform elliptical polarization. All OAM densities for these four fields depend on the polarization state of the initial light field. For two light fields with hybrid polarization, the OAM density at the focus changes sign with a change in both the azimuthal and radial coordinates. It is known that in the case of paraxial optical vortices with elliptical polarization, the OAM density does not depend on the polarization state, and is completely determined by the optical vortex topological charge. Therefore, in the paraxial case, the azimuthal orbital energy flux always rotates in one direction, determined by the sign of the optical vortex topological charge. However, in the case of non-paraxial light fields, the OAM density at the focus is shown in this work to depend on the polarization state. The energy flow can rotate in different directions at different distances from the optical axis.
Information and communication optics
075701
Mao Ye, Han Chen, Kewei Liu, Zhe Wang, Taige Liu and Xinyu Zhang
A polarimetric camera prototype is proposed, which is mainly based on coupling a twisted nematic liquid-crystal (LC) material driven electrically with an arrayed CMOS sensor to rapidly select and establish the required polarization state of the imaging light field. The mechanism for electrically manipulating polarized rotation by a thick functional LC film of more than 20 μm, which clearly presents a featured signal voltage window effect based on electrically switching and further regulating between the polarized sensitive and non-sensitive modes, is analyzed carefully. The key controllable parameters including a degree of polarization and a set of azimuth of polarization outfrom the imaging prototype can be employed as the prior clues for effectively actuating and tuning the polarized LC chip. The operation for remarkably enhancing the target detection and recognition efficiency according to the segmented profiles, edge details or featured symbols of selected objects will lead to an obvious boost for efficiently capturing and identifying targets of interest. The relationship between the polarization state or re-oriented rotating angle of the imaging micro-beams and the signal voltage loaded over the LC chip is investigated through fine-tuning the root-mean-square voltage based on an ordered variance of the polarization azimuth in the range from the initial 0° to the final 90°. The comparative imaging measurements demonstrate the effectiveness of the electrically regulated polarimetric camera prototype, highlighting a possible future development by upgrading the polarized photosensitive array.
075702
Shijie Li, Zhao Li, Haitao Liu, Chunyan Shi, Zihuai Li, Chen Yang, Bingcai Liu, Xueliang Zhu, Haifeng Liang, Changlong Cai et al
Conventional optical systems employing spherical and aspherical surfaces encounter constraints on variable parameters that limit both imaging performance and miniaturization potential. This study presents a systematic methodology for designing and optimizing freeform-based transmission imaging systems through surface type conversion techniques. The proposed framework integrates two advantages: one is an optimal multi-parameter optimization algorithm addressing surface parameter fitting problem, and the other is a comprehensive implementation framework for freeform optical system design, capitalizing on the augmented design flexibility afforded by freeform surface. Experimental validation through a prototype camera system demonstrates significant performance enhancements: grid distortion reduction from 2.21% to 1.38%, and improvement of edge field modulation transfer function at 110 lp mm−1 from 0.26 to 0.47. This work establishes a generalized design paradigm for freeform optics, providing a systematic framework that reconciles optical performance optimization with structural miniaturization requirements, thereby advancing the development of compact high-performance optical system.
075703
Mengyuan Ru, Yulong Huang, Jiayin Xue, Yiqun Zhang, Xiaolong Xie and Lukui Jin
In this paper, we propose the design and present a simulation demonstration of a system for tunable optical generation of microwave/millimeter-wave (mm-wave) signals using digitally programmable optical frequency comb. This is the first time that digital signals have been used as an external modulation microwave source. Compared with using sinusoidal signals, the output signal of optical phase modulation driven by digital signals has flat comb lines. The average distribution of spectral energy in this way enables high-order sidebands to have higher energy, thereby reducing the energy loss of mm-wave generated by external modulation methods. By changing the center frequency of the optical narrowband bandpass filter, the frequency of the output mm-wave signal can be easily adjusted, achieving tunable optically generating mm-wave signals. The simulation results demonstrate that mm-wave generation in the Ku/Ka band of satellite communication network has been successfully realized. During the tuning process, the output mm-wave signal power stabilized at −14.5 dBm, with an optical sideband suppression ratio of 43 dB and a radio frequency sideband suppression ratio of 46 dB.© 2023 Optica Publishing Group
075704
E Z Omar and F E Al-Tahhan
This study addresses the critical need for accurate, real-time phase demodulation in the opto-mechanical characterization of polymer fibers. Existing methods face significant limitations, including difficulties in handling noise, non-stationary patterns, reliance on simulated data or limited real-world samples, and computational inefficiency. To overcome these challenges, we propose a novel deep learning approach based on a refined U-Net architecture that directly extracts phase maps from complex interference patterns. Our methodology employs a diverse dataset of 460 high-resolution experimental patterns captured under various conditions of illumination, contrast, and distortion using Pluta polarizing microscopes and Mach–Zehnder interferometers, ensuring robust performance across real-world scenarios. The network architecture integrates encoder–decoder blocks with transposed convolutions and is trained end-to-end, eliminating the need for intermediate preprocessing steps such as fringe normalization. Data augmentation techniques including random rotations and flips further enhance the model’s generalization capability. Through Adam optimization minimizing mean squared error (MSE), the model achieves a remarkable 98.6% reduction in error, reaching a final MSE of 0.00434 after 220 training iterations. Applied to isotactic polypropylene and polypropylene fibers, the method demonstrates real-time capability in mapping birefringence and refractive index changes during mechanical stretching, revealing dynamic structural phenomena like core–shell formation and necking. This work bridges advanced machine learning with optical metrology, offering a scalable solution for industrial fiber characterization.
075705
Yue-Hua An, Yu Guo, Jiang-Wei Liu, Xu-Lin Gao and Zhen-Sen Gao
We propose and numerically demonstrate a novel high-speed physical layer secure optical communication system based on a dual-path mutual feedback phase encryption scheme, which comprises two coupled electro-optic phase modulation feedback branches. The proposed scheme is able to randomly scramble the phase of a confidential message without any additional encryption signal and eliminate the time delay signature (TDS) that exists in a conventional electro-optic phase feedback loop. The TDS concealment is accomplished by the nonlinear transformation produced by the dual-path mutual feedback optical phase encryptor. As a proof-of-principle demonstration, a 32 Gbps differential phase shift keying signal is encrypted and secretly transmitted over a span of 330 km standard single-mode fiber with a bit error rate lower than the hard-decision forward-error correction threshold. Both the sensitive delay time and dispersion values in the feedback loop are employed as hardware keys to guarantee system security. It is envisioned that the proposed scheme may provide an attractive approach for future hardware encryption based high-speed secure optical communication.