Table of contents for issue 2, volume 27, Journal of Optics

Volume 27

Number 2, February 2025

Previous issueNext issue

    Papers

    Metamaterials and structured photonic materials

  • 025101

    , , , , and

    A highly sensitive polished photonic crystal fiber (PCF) sensor with an external sensing method has been proposed, which utilizes the surface plasmon resonance (SPR) optical sensing technique. The aim of this study is to develop a sensor which can be utilized to detect a vast range of analyte samples, ranging from low refractive index (RI) chemicals to high RI biomedical applications, while also considering the cost and ease of fabrication. The two polished sides are coated with a plasmonic material called aluminum-doped zinc oxide (AZO) that enhances the coupling strength and enables the SPR technology. The finite element method is employed to analyze the PCF numerically, which confirms a RI spanning from 1.18 to 1.45 for analyte detection, the highest detection extent found for AZO. After analysis, the maximum value of amplitude sensitivity was found to be 6312.34 ${\text{RI}}{{\text{U}}^{ - 1}}$, and the highest wavelength sensitivity of 20 500 nm RIU−1 was attained. Moreover, the PCF provides a maximum amplitude resolution of 1.58 × 10−6 RIU and wavelength resolution of 4.88 × 10−6 RIU. The confinement loss was also fairly low, perfect for longer sensor lengths. The figure of merit resulted to be 820.924 RIU−1. This SPR-PCF sensor offers high stability during operation due to its high linearity in the visible and infrared spectrum. The proposed sensor has the merits of an extremely wide range of RI detection with high sensitivity and a significantly improved polished design, which can be used in various applications, including chemical analysis, gas detection, and biological cell detection with extremely high accuracy.

  • 025102

    We report on polarization-dependent strong coupling between vibrational transitions and the electromagnetic mode of a molecule-embedded metamaterial cavity. The metamaterial cavity comprises a modified tri-layer structure of metal-insulator-metal, where the insulating layer is replaced by an infrared-active polymer. This polymer layer is sandwiched between an array of linear antennae on top and a continuous metal film at the bottom where the maximum field enhancement occurs. Using polarization-selective reflectivity simulation of the cavity, we analyze their response to different light polarization and find two orthogonally polarized optical systems with different coupling strengths, one strongly coupled and one weakly coupled. The strong coupling gives rise to the formation of lower and upper polaritons, while dark states emerge because of weak coupling. This ultrathin metamaterial with tunable properties can pave the way for developing active, dynamic, tunable infrared polaritonic devices, molecular sensors, site-selective chemical reaction control, and quantum information processing.

  • 025103
    The following article is Open access

    and

    The bulk-boundary correspondence (b-bc) principle, which relates interface modes between two periodic structures to topological invariants of the respective Bloch bands, is widely accepted in electrodynamics. However, this acceptance stems largely from condensed matter (CM) theories. It is desirable to establish direct connections between the topological principles and Maxwell electrodynamics, rather than relying on CM results. Such connections have in recent years been found in the case of standing evanescent waves in periodic dielectric media. This paper extends these analyses to waves propagating along an interface between two periodic structures, possibly with frequency-dependent dielectric permittivities. The paper shows that the b-bc principle continues to hold for any physically realizable structures, in which the density of electromagnetic energy must be positive. The paper rigorously proves that in this physically valid case impedance of traveling interface modes within any given bandgap decreases monotonically as a function of frequency.

  • 025104

    , , , , , and

    Metasurfaces have provided new opportunities for the realization of flat lenses, among which tunable metalenses have garnered considerable attention due to their flexible functionalities. In this paper, we present a continuously tunable metalens based on the phase-change material Sb2S3, which enables precise and continuous focal length control through the transition of states. Under the excitation of linearly polarized light at 1550 nm, phase compensation is provided by changing the crystallization state of the Sb2S3 nanopillars, allowing the focal length to continuously shift between 36 µm and 48 µm. At the same time, the metalens maintains a high focusing efficiency over 75%. This approach provides greater design flexibility and broader applicability across diverse applications. By reducing the reliance on polarized light sources, it enhances device integration and tunability, paving the way for new opportunities in the practical implementation of metalenses in advanced optical imaging and nanophotonics.

  • Perspective

  • 022501
    The following article is Open access

    and

    Traditionally, the optics and microwave communities have been separated not only by the THz band but also by differences in technical knowledge, analytical and computational approaches, design processes, and measurement methodologies. In this contribution, we aim to bridge this divide by leveraging a computational asymptotic technique from optics, known as physical optics, which holds significant potential for the microwave/antenna community. This technique allows for precise microwave calculations for radiation patterns, reflection coefficients, material losses, and mutual coupling between antennas.

  • Topical Reviews

  • 023001
    The following article is Open access

    , and

    High-dimensional quantum entanglement is an important resource for emerging quantum technologies such as quantum communication and quantum computation. The scalability of metres-long experimental setups limits high-dimensional entanglement in bulk optics. Advancements in quantum technology hinge on reproducible, and reconfigurable quantum devices—including photon sources, which are challenging to achieve in a scalable manner using bulk optics. Advances in nanotechnology and CMOS-compatible integration techniques have enabled the generation of entangled photons on millimeter-scale chips, significantly enhancing scalability, stability, replicability, and miniaturization for real-world quantum applications. In recent years we have seen several chip-scale demonstrations with different discrete degrees of freedom including path, frequency-bin, time-bin, and transverse modes, on many material platforms. A complete quantum photonic integrated circuit requires the generation, manipulation, and detection of quantum states, involving various active and passive quantum photonic components which further increase the degree of complexity. Here, we focus on the high-dimensional versions of qubits—qudits—and review the nonlinear optical processes that facilitate on-chip high-dimensional entangled photon sources, and the currently used material platforms. We discuss a range of current implementations of on-chip high-dimensional entangled photon sources and demonstrated applications. We comment on the current challenges due to the limitations of individual material platforms and present future opportunities in hybrid and heterogeneous integration strategies for the next generation of integrated quantum photonic chips.

  • 023002

    , , , , , and

    Ghost imaging reconstructs images by using two separate, but correlated beams. One beam illuminates the object and then is collected by a bucket detector. The other beam is captured by a space-resolved (pixelated) reference detector. The object information is retrieved in the correlation measurements of the two detectors. Ghost imaging can be implemented with entangled photon pairs, or with intensity correlation of thermal light (TL). For the latter, recently, a theory of joint probability density function has been proposed to investigate the high-order correlation functions of TL. The probability theory is based on two assumptions. The intensity of the reference beam inside the image resolution is assumed to be a stochastic variable, which meets a certain probability density function. The second assumption is that the bucket signals are the sums of the stochastic variables from the object. Then the joint probability density function of the bucket and reference signals can then be established. As a result, the probability theory can predict the nonlocal behaviors of ghost imaging with TL (GITL). The progress and applications of the probability theory in the GITL experiments were reviewed in this paper.

  • Papers

    Nanophotonics and plasmonics

  • 025001

    , , , , , , and

    Photonic crystal (PhD) waveguides on the silicon nitride (SixNy) platform currently are only capable of transmitting a single light polarization, severely limiting polarization diversity applications. In this work, we propose a scheme that combines a single-polarization photonic band gap (SPBG) formed by the first two bands with the same polarization, along with large birefringence between the first two bands with different polarizations. In simple terms, one polarization in the PhC slab waveguide is guided by the SPBG, while the other polarization is index guided, and overlap between the frequency bands for the two polarizations in which propagation is forbidden, dubbed the no-polarization-mode region (NMR), tuned by the aspect ratio of PhC slabs. This approach theoretically achieves PhC waveguides on asymmetric SixNy slabs that guide both polarizations within the NMR. Three-dimensional (3D) planewave-method calculations show that through simple adjustment of the aspect ratio of the PhC slab, the first two bands with different polarizations can be adjusted to be shifted in frequency to form the NMR, where neither TE- nor TM-like modes can propagate along the in-plane directions. The NMR is then systematically investigated and optimized for various refractive indices and slab thicknesses, and using the optimized-NMR design, line-defect waveguides supporting propagation of both polarizations are theoretically demonstrated. A 3D finite-difference time-domain simulation shows that an all-polarization (AP) bandwidth as large as 180 nm can be obtained in an optimized PhC waveguide with SixNy refractive index of 2.4, which can be tuned by x and y. In addition, our investigation shows that an NMR can also be obtained in an asymmetric rod-type PhC slab even when the refractive index is as low as 1.8, offering significant flexibility in engineering of the structure and refractive index of AP devices on SixNy and, by extension, in other moderate-index platforms.

  • 025002
    The following article is Open access

    , , , and

    Polaritonic interactions are pivotal in advancing sensing technologies, optical devices, and waveguides. This study presents a theoretical investigation into polaritonic interactions at the interface of chiral-loaded temperature-sensitive materials (TSMs). Indium antimonide (InSb), known for its temperature-dependent phase-transition optical properties, is utilized as the TSM. The electromagnetic (EM) behavior of InSb is described using the extended Drude model, while the isotropic chiral medium is characterized through coupled constitutive relations. By applying tangential boundary conditions for EM field continuity at the chiral–InSb interface, the dispersion relation governing hybrid polaritons is derived. Numerical computations performed in Wolfram Mathematica, utilizing the contour plot technique, reveal the dispersion characteristics, effective mode index, and field distributions under varying temperatures. The findings demonstrate the existence of two distinct polaritonic regimes: (i) hybrid polariton–phonon coupling at temperatures below 200 K, and (ii) hybrid polariton–plasmon coupling at temperatures exceeding 260 K. Additionally, the effects of chirality and temperature on the dispersion curves, effective mode indices, and field profiles are systematically analyzed. Results reveal that polaritonic surface modes can be dynamically tuned by manipulating external temperature and material chirality. These insights hold significant promise for the development of temperature-responsive terahertz-infrared sensors, enantiomeric detectors, thermo-optical surface waveguides, and near-field imaging systems.

  • Biophotonics

  • 025301

    , , , , , and

    3D tracking is an important technique for investigating biophysical processes, which provides abundant information for cell identification and characterization. In this paper, we present an effective and practical 3D tracking approach based on digital holographic microscopy (DHM) with auto-focusing reconstruction and a dynamical light-scattering filtering algorithm. An off-axis DHM system was established to capture the holograms of flowing samples. Utilizing reliable auto-focusing, the flowing samples were reconstructed. To improve the resolution and contrast, the principal component analysis filtering method was applied to eliminate the background, speckle noise and interference fringes. Combining the 2D positions of the flowing samples in the focal plane with the depth positions obtained from auto-focusing, the 3D trajectory and velocity of the flowing samples were obtained. The results demonstrated that the method could achieve simultaneous measurement of size and velocity of objects while satisfying signal-to-noise ratio and resolution, providing a foundation for high-throughput cell classification and multi-parameter characterization.

  • Light-matter interactions

  • 025401

    and

    Wafer is an important basic material in semiconductor manufacturing, mainly used for the production of integrated circuits and microelectronic devices. Surface defects on wafers can affect lithography and subsequent processes, leading to circuit failure, with particle defects accounting for the largest proportion. This article focuses on the particle defects on the wafer surface and analyzes the optical scattering field distribution of particles using the Mie scattering theory. The relationship between the system collection angle and the scattered light intensity is also studied. It is found that when the tilt angle is 75°, using a larger collection angle is more conducive to the detection of surface particle defects. The experimental system has two channels that can receive scattered light signals, the narrow channel uses a lens to collect scattered light at 3°–15°, while the wide channel uses an ellipsoidal mirror to collect scattered light at 25°–70°. The experimental object is silicon dioxide particles with a radius of 500 nm on the wafer surface. After comparing the vertical incidence and oblique incidence (incidence angle of 75°) experiments, it was found that the wide channel detection effect was the best under oblique incidence, which verified the simulation results and research conclusions.

  • Propagation, diffraction and scattering

  • 025601

    , , and

    Single-ring perfect optical vortex (SR-POV) beams have received significant attention from the singular optics community due to their topological charge (TC)-independent ring radius, which offers certain advantages over conventional vortex beams such as Laguerre–Gaussian (LG) and Bessel-Gaussian (BG) beams in applications like particle trapping, optical communication, and imaging. However, the generation of double-ring perfect optical vortices (DR-POVs), embedded with two TCs, offers greater advantages over SR-POVs in terms of robustness during propagation and enhanced channel capacity in communication networks. In our theoretical analysis, we first highlight the differences between true and approximated representations of DR-POV beams. We then investigate the propagation of DR-POV beams in free-space, demonstrating how their evolution is influenced by factors such as the TCs of the inner and outer rings and the ratio of the beam radius to beam width at the waist plane. Similar to SR-POV beams, DR-POV beams exhibit non-diffracting behavior over short propagation distances, with little to no impact on the beam’s propagation when the TCs of the inner and outer rings are altered. However, phase wandering characteristics are observed, even over short propagation distances. Our research could find potential applications in the field of free-space optical communication.

  • 025602

    , and

    Liquid crystal spatial light modulators (LC-SLMs) are widely used in optics, and grayscale-phase calibration can effectively improve their modulation accuracy. The most commonly used grayscale-phase calibration method is based on the displacement of interference fringes, which is susceptible to environmental interference and only uses a part of the LC-SLM area. In this paper, vortex-grating lateral-shearing interferometry is introduced into the grayscale-phase calibration, which can theoretically obtain the phase information of the full pixel on the LC-SLM. The self-reference experiment not only carries out the grayscale-phase calibration, but also proves the effectiveness of our proposed method by Twyman–Green interferogram between the reference beam and the vortex beam produced by LC-SLM. High-precision grayscale-phase calibration of LC-SLM can open up some new application scenarios in the future.

  • 025603

    , and

    Translation position errors in ptychography can significantly reduce the reconstruction quality. It is crucial to obtain the accurate translation positions between the probe and the object. Current methods for correcting the translation position error are applied into the iterative process of ptychography that will increase the computation time of a single iteration, and take much time to correct the translation position error and obtain a high reconstruction quality. A sub-pixel block matching method is proposed to ultrafast correct the translation position errors and greatly reduce the correction time. This method is applied in the preprocessing stage before iterations that does not increase the computational burden of a single iteration in ptychography and can quickly correct the translation position error. Simulations and experiments demonstrate that our method can significantly improve computational efficiency with ensuring correction accuracy.

  • 025604

    , , , , and

    Structured light with self-healing properties against partial obstructions has gained significant interest due to its potential applications in both fundamental and applied sciences. Here, we present a comprehensive investigation on the self-healing properties of the topological structure of optical skyrmionic beams, by exploiting numerical simulation and experimental spatial light modulation. It is shown that the standard skyrmionic beams exhibit a strong self-healing ability, as revealed by the rapid increase in the skyrmion number after obstacles. Moreover, the skyrmionic beams possess better self-healing ability against disk-type obstacles at the beam center than aperture-type obstacles at the periphery. Our results indicate the robustness of topologically structured beams against various obstructions, guiding practical applications such as robust information transfers.

  • Information and communication optics

  • 025701

    , , and

    In this paper, we propose a parallel injection chaotic system involving three vertical-cavity surface-emitting lasers (VCSELs). First, the chaotic synchronization performance of the system is evaluated using the cross-correlation function. Then, we analyze in detail the effects of injection strength, frequency detuning, and parameter mismatch on the chaotic synchronization and information transmission of the system. Numerical studies indicate that the proposed parallel injection chaotic system based on three VCSELs can achieve high-quality chaotic synchronization over a wide bandwidth and a broad range of input parameters. Furthermore, even in the case of parameter mismatch, high-quality chaotic synchronization and communication can still be achieved. Additionally, with appropriate injection strength, the system can compensate for the efficiency reduction caused by parameter mismatch.

  • 025702

    , , and

    This work introduces an innovative method for heart sound recognition using a hybrid joint transform correlator (JTC). Traditional techniques such as convolutional neural networks and machine learning models, although promising, often suffer from computational complexity and latency issues, resulting in slower processing speeds. In contrast, the proposed method overcomes these challenges by utilizing an optical correlator that operates at significantly accelerated speeds. The heart sound signals are initially converted into spectrograms, which are subsequently correlated using the hybrid JTC for recognition and decision-making. Moreover, to handle variability within heart sound classes and enhance recognition accuracy, a composite filter synthesized from multiple spectrograms is integrated with the JTC. As a result, the proposed approach not only enhances the speed of heart sound analysis but also maintains high precision and reliability. The effectiveness of the method has been confirmed through both simulation and experimental results.

  • 025703

    , , , and

    Fringe projection profilometry (FPP) technique is a widely used method in three-dimensional measurement and has broad applications in industrial measurement. This method typically requires projecting multiple phase-shifted fringe patterns to achieve high-precision imaging. However, in industrial contexts, the measured objects are often metallic components with high reflectivity, which would adversely affect the reconstruction quality of FPP. High Dynamic Range (HDR) technology can effectively address such issues; however, it requires an increased number of projected fringe patterns, which reduces measurement efficiency. This paper proposes a single-shot 3D measurement method that combines traditional HDR techniques with deep learning to measure objects with highly reflective surfaces. The method employs two network models: the Phase Recovery Network (PRNet) and the Coarse Phase Unwrapping Network (CPUNet). PRNet receives a single fringe image with saturated pixels and outputs the numerator and denominator terms for phase retrieval. CPUNet takes the wrapped phase data processed through an arctangent function from PRNet’s output and predicts the coarse unwrapped phase to assist in phase unwrapping, yielding high-precision phase results. Experiments show that this approach requires only one shiny fringe image as input and effectively restores phase errors caused by high reflectivity, achieving a high reconstruction accuracy for the complete 3D shape of the object.

  • 025704

    , and

    Existing methods typically used to detect transmitted wavefronts (i.e. the phase-shifting interferometer) operating at only a few specific wavelengths, to overcome this limitation and improve the accuracy of transmitted wavefront detection, a digital multi-wavelength laser interferometric system and a feedforward open-loop hysteresis nonlinearity compensation method are proposed in this paper. The laser interferometric system contains a light source system, a collimating system, an imaging system and a phase-shifting control system. The light source system contains five lasers, and five lasers are 473, 532, 632.8, 721, 1064 nm lasers, respectively. The physical table lookup analysis method is utilized as the compensation method to compensate the hysteresis nonlinearity of piezoelectric transducers. At the same time, the hysteresis nonlinearity compensation method is applied in the multi-wavelength laser interferometric system. The experimental results show that the displacement linearity error of piezoelectric transducer reaches 0.58 V and the linearity reaches 18.68% without compensation. After using the physical table lookup analysis method compensation, the maximum displacement error of piezoelectric transducer is reduced to 0.07 V and the linearity reaches 2.42% at the lookup number of 1000, which proves that the method can accurately compensate piezoelectric transducer’ hysteresis nonlinearity. At the same time, the multi-wavelength laser interferometric system with the feedforward open-loop hysteresis nonlinearity compensation method is applied successfully to detect the transmitted wavefront of a glue lens at various wavelengths. The experimental results show that the maximum predicting error at 532 nm reaches 0.003 and the maximum predicting error at 632.8 nm reaches 0.002, which prove that the physical table lookup analysis method can be applied in the multi-wavelength laser interferometric system to improve the accuracy of transmitted wavefront detection and the multi-wavelength laser interferometric system has certain practicability.

  • Integrated photonics

  • 025801

    , , , and

    Integrated silicon photonics based on phase-change materials have the advantages of energy efficiency, ultra-compactness, and nonvolatility, with a promising prospect in reconfigurable photonic systems. A wavelength-selective 1 × 2 nonvolatile optical switch based on a periodic Ge2Sb2Se4Te1 (GSST)-assisted racetrack silicon micro-ring is proposed, where the GSST is embedded in the micro-ring as a one-dimensional photonic crystal. The switch state changes from ‘OFF’ to ‘ON’ by changing the GSST state from amorphous to crystal. The results show that the extinction ratio of the device is 27.99 dB and 19.57 dB at the drop and through ports, respectively. The insertion loss is as low as 1.21 dB at the through port in the crystal state and 0.61 dB at the drop port in the amorphous state. The proposed on-chip optical switch significantly enhances device integration, offers a potential path toward the development of nonvolatile Si-GSST hybrid optical switches, and is crucial to realizing reconfigurable photonic systems. Furthermore, the resonant wavelength of the switch changes very little, by only 0.66 nm between the ‘ON’ and ‘OFF’ states, which is suitable for multichannel wavelength-division-multiplexing systems.

  • 025802

    , and

    Modern security cameras are complex, operate in visible and near-infrared wavelength bands with a vast field of view, and are mounted on a motorized stage to scan and zoom the scene. Here, a low-cost aberration free security camera designed to record activity within a fixed-size field and provide surveillance in the visible band is discussed to reduce the cost of the design and also the fabrication of a custom sensor is highly prohibitive. Using global synthesis and automated design methods with the Code-V tool, we have designed and analyzed an on-screen display (OSD) camera with multiple camera lens parameters and suggested using the proposed camera system during the day in an open, well-lit area. For getting video graphics array format (640 × 480 pixels), the pixel size should be 7.5 µm. Considering the Nyquist criterion, the smallest line pair detected by the sensor would be two pixels wide,15 µm/lp or 66.67 c mm−1. The optimal parameters have been designed and optimized with multiple parameters like modulation transfer function (MTF), spot size diagrams, ray aberration with third-order and fifth-order aberrations curve, and error function. After optimization, the effective focal length value is 3.9881. The aperture size obtained after optimization is f/8, the entrance pupil diameter is 0.4985, and the overall length is 0.5184. The MTF obtained is 0.7563. The error function reduced to 0.2612. The aberration value lies from 0.018019 to −0.018019. The image height obtained at 1.8597. The designed OSD security camera eliminates spherical and chromatic aberration significantly and eliminates other third order and fifth order aberrations. The significant findings benefit the optics community in designing aberration free low-cost security camera systems.

  • Photovoltaics and energy harvesting

  • 025901

    , and

    Since antireflective coating (ARC) has the ability to lessen optical loss experienced by solar cells, it is beginning to gain traction in the solar cell market. Without the use of ARC, the solar cell’s surface reflects about 30% of light and leads to a decrease in efficiency. The Zinc Oxide (ZnO) material has been chosen in this study as the ARC to study the enhancement of the solar cells’ performance using simulation approach. The ZnO layer is used as an ARC on top of the silicon based solar cell with certain thicknesses ranging from 60 to 90 nm. The optimum thickness of ZnO that results in the maximum current density is chosen for further modification on surface texturing. Four types of textured surface on the front surface of silicon based solar cell are proposed. It is shown that 80 nm thickness of ZnO ARC revealed the best performance in terms of current density generated which is reach 34.92 mA cm−2. Positive increment of current density is shown on further modification of surface texturing. Random inverted pyramids appear to be the best front surface with another 17.5% increment in current density.