Batteries and Energy Storage
A77
Manickam Minakshi, Dominique Appadoo and Danielle E. Martin
The electrochemical performance of planar and porous zinc electrodes in an actual
battery using lithium hydroxide (LiOH) electrolyte has been investigated. A large discharge capacity of 220 mAh/g is delivered by porous zinc electrodes while planar electrodes only deliver 130 mAh/g. The porous anode improves the rate capability of the rechargeable alkaline battery while enhancing the utilization of the active material. Using scanning electron microscopy and IR spectroscopy, the surface morphology and composition of the Zn anodes were studied at the end of the discharge process. While zincate ions and ZnO products were found after the discharge at the surface of the planar anode, no evidence for these products was found in the porous anode. The porosity of this surface prevents the detrimental buildup of zincate ions at the anodic surface that leads to passivation.
A81
Jae-Won Lee and Jun-Il Kim
A85
Sang-Jun Park, Yeong-Kyeun Paek, Hyukjae Lee and Young-Jun Kim
A88
H. Gabrisch and R. Yazami
A91
M. Pfanzelt, P. Kubiak and M. Wohlfahrt-Mehrens
Fuel Cells and Energy Conversion
B69
Christiane de Arruda Rodrigues, Norma R. de Tacconi, Wilaiwan Chanmanee and Krishnan Rajeshwar
B73
Francisco Alcaide, Garbiñe Álvarez, Pere L. Cabot, Hans-Jürgen Grande and Oscar Miguel
The effect of the cathode gas diffusion layer compositions on the performance of direct methanol fuel cells has been investigated. Morphological and textural properties of different diffusion layers have been characterized. Experiments in a single cell show that the use of a microporous layer (MPL) made with acetylene black instead of furnace carbon black results in higher cell voltages and power densities. This has been explained by a smaller mass-transfer resistance in the cathode diffusion layer due to a more suitable structure of the MPL when using acetylene black.
B76
Akihiro Kawahara and Tatsumi Ishihara
B79
Tomihisa Tachibana, Junichi Masuda, Atsushi Ogura, Yoshio Ohshita and Koji Arafune
Corrosion, Passivation, and Anodic Films
C17
Tatsuro Fukushima, Akifumi Takeda, Kazuyuki Nishio and Hideki Masuda
Ordered trench structures with high aspect ratios were formed by the anisotropic anode etching of (100)-oriented Al foils. A thin polymer mask with a periodic line and space pattern enabled the selective anode etching of Al in an electrolyte containing
ions. The shape and depth of the obtained trenches were strongly dependent on the temperature of the electrolyte used for anode etching. On the basis of this property, trenches with controlled geometrical structures could be obtained through this process.
Electrochemical/Chemical Deposition and Etching
D47
Zhifeng Yang, Na Li, Xu Wang, Zhixiang Wang and Zenglin Wang
In this article, a bottom-up copper filling for different submicrometer trenches was investigated by an electroless deposition technique using a triblock copolymer of poly(ethylene glycol) (PEG)–Cpoly(propylene glycol) (PPG)–CPEG with ethylene oxide terminal blocks as an additive. The bottom-up filling behavior of the electroless copper bath for different trenches was investigated in a plating bath containing 1.0 mg/L EPE-8000. The cross-sectional scanning electron microscopy observation indicated that the trenches with different widths ranging from 110 to 640 nm were all filled completely by electroless copper. The inhibitions of EPE-8000 for both cathodic and anodic reactions were studied.
D50
Subhadeep Mukherjee, Xiaopeng Li, Fan Gao and Zhiyong Gu
We report an efficient silver etchant in the fabrication of active nanowire structures by the electroplating technique using an anodized aluminum oxide template. These active nanowires include solder materials (low melting point metals or metal alloys) and magnetic materials. Single- or multisegmented nanowires with these active materials have been prepared using the new etching solution. A conducting polymer such as polypyrrole can also be fabricated onto these nanowires to enable hybrid structures and interfaces. These multisegmented active nanowires open a new platform in the fabrication and integration of nanowire-based electronics and hybrid devices.
D53
Wei-Cheng Lien, Kan Bun Cheng, Debbie G. Senesky, Carlo Carraro, Albert P. Pisano and Roya Maboudian
The heteroepitaxial growth of cubic silicon carbide (3C-SiC) films on AlN/Si(100) substrates is demonstrated using a modified precursor feeding procedure of a chemical vapor deposition process. A thin (150 nm) SiC buffer layer is formed during the temperature ramp from 600 to
in the presence of the methyltrichlorosilane precursor and hydrogen gas. The deposited 3C-SiC thin film exhibits a sharp Raman transverse optical 3C-SiC peak, a strong X-ray diffraction intensity for the SiC(111) peak, and an atomically abrupt SiC/AlN interface. These characteristics support that this SiC/AlN/Si layered structure is promising for the electrical isolation of top SiC layer from Si(100) substrate.
D57
E. Tada, M. Saeki and H. Kaneko
In this article, we measured the dynamic change in interfacial tension between two immiscible liquids by Wilhelmy method during the electrodeposition of a zinc film and discussed why the film grows preferentially along the interface. Experimental results indicated that the interfacial tension near the growth front is smaller than that away from the growth front. In addition, convective vortex was locally observed in the electrolyte under the growth front. These results suggest that convective motion due to gradient in the interfacial tension in addition to electroconvection causes rapid transportation of
to the growth front, resulting in enhancement of preferential growth along the interface.
Electrochemical Synthesis and Engineering
E11
Poulomi Roy, Tuli Dey and Patrik Schmuki
In the present work, we study the wetting behavior of
nanotube layers using droplets of ionic liquids. This allows us to examine the wetting characteristics under the vacuum conditions of a scanning electron microscope and, therefore, with a very high local resolution. From the results, it is evident that as-formed nanotubes are superhydrophilic; however, strange preferential wetting takes place in the intertubular space. Furthermore, results with octadecyl silane (ODS)-coated tubes show the expected superhydrophobic behavior but also show that an E-beam-induced chain scission mechanism can be initiated similar to classical pseudo-photocatalytic effects.
Dielectric Science and Materials
G57
Kwi-Il Park, Sang Yong Lee, Seungjun Kim, Jaemyung Chang, Suk-Joong L. Kang and Keon Jae Lee
G60
Ali Dabirian, Yury Kuzminykh, Bamdad Afra, Scott Harada, Estelle Wagner, Cosmin S. Sandu, Giacomo Benvenuti, Simon Rushworth, Paul Muralt and Patrik Hoffmann
Semiconductor Devices, Materials, and Processing
H227
C.-C. Ho, C.-H. Huang, B.-S. Chen, Y.-H. Su, K.-J. Chen, C.-S. Hsu and T.-H. Lee
H230
Sheng-Wei Chen, Chao-Ying Hsieh, Chung-Hwa Wang and Jenn-Chang Hwang
H234
Wei-Chou Hsu, Ching-Sung Lee, Chiu-Sheng Ho, Ying-Nan Lai, Jun-Chin Huang, Bo-Yi Chou, An-Yung Kao, Hsuan-Hsien Yeh and Chuan-Luan Wu
H237
Hwan Hee Jeong, Sang Youl Lee, Young Kyu Jeong, Kwang Ki Choi, June-O Song, Yong-Hyun Lee and Tae-Yeon Seong
H240
Sunjung Kim
SU-8 photoresist passivation structures were used to protect vertical structure GaN-based light emitting diodes from explosive forces produced during the laser lift-off (LLO) process of a sapphire substrate. The soft bake time of SU-8, which determines the solvent content, was varied to measure the mechanical properties of SU-8 at different dilution ratios. The SU-8 attained a sufficient hardness of 0.23 GPa and a Young’s modulus greater than 4.0 GPa, regardless of soft bake time and dilution ratio. The SU-8 passivation structures with good damping properties showed excellent protection of the weak GaN-based layers from the LLO process.
H244
C. V. V. S. Surisetty, B. C. Peethala, D. Roy and S. V. Babu
H248
Jeonggil Na, Taesung Kim, Jae-Boong Choi, Young-Jin Kim, Yong-Hyeon Shin, Ju-Young Yun and Sang-Woo Kang
Titanium nitride particles formed in thermal and plasma-enhanced metallorganic chemical vapor deposition processes using tetrakis(diethylamino)titanium were investigated. Particle formation was studied by using a particle beam mass spectrometer calibrated by a certificate reference material (NaCl) as a function of process variables such as bubbler temperature, deposition temperature and pressure, sampling positions in the reactor, plasma conditions, and a flow rate of carrier gas. From these results, the effects of the sampling position and the thermal and plasma energies were studied. These measured results were in reasonable agreement with the transmission electron microscopy results.
H253
Takashi Yanase, Taketoshi Matsumoto and Hikaru Kobayashi
Sensors and Displays: Principles, Materials, and Processing
J81
Young Wook Park, Young Min Kim, Jin Hwan Choi, Tae Hyun Park, Hyun Ju Choi, Min Ju Cho, U Ra Lee, Dong Hoon Choi and Byeong-Kwon Ju
This article reports the highly color stable white organic light-emitting diodes (WOLEDs) having a high color rendering index (CRI) utilized by simple-hybrid structures involving emitting layers (EMLs) of phosphorescent yellow polymer and a thermally deposited fluorescent blue. To derive the yellow EML, a highly soluble red dopant is developed and used with a highly soluble green co-dopant. Using a simple-hybrid structure, the emission tuned WOLEDs are successfully demonstrated with a high CRI of 93 and a highly color stable CIE 1931 coordinate over the full driving voltages from
to
depending on the blue EML host.
J85
Jae Won Choi, Jun Hyuk Cheon, Jae Hwan Oh, Jin Jang, Sung-Chul Kim, Ji-Su Ahn, C. A. Kosik Williams and J. G. Couillard
We have studied the impact of off-bias stress on the performance of thin film transistors (TFTs) fabricated on single crystalline silicon-on-glass substrates. The p-channel TFT transfer characteristics typically exhibit excellent on-state performance with a field-effect mobility of
and a subthreshold swing of around 200 mV/dec. However, the off-state drain current has increased with increasing gate voltage. This increasing off-state current phenomenon can be significantly reduced by performing an off-state bias for 10 s. The formation of electron traps in the gate oxide near the drain is the main factor that reduces the off-state leakage current.
Nanostructured Materials, Carbon Nanotubes, and Fullerenes
K63
Chiung-Wan Fang, Jyh Ming Wu, Lin-Tsang Lee, Hsin-Hsien Yeh, Wen-Ti Wu, Yu-Hung Lin, Pei-Jung Tsai and Yi-Ru Chen
K67
Hyoun Woo Kim, Han Gil Na, Ju Chan Yang, Hyo Sung Kim, Ji-Hye Lee and Keon-Ho Yoo
We studied the characteristics of tetragonal
nanowires synthesized by heating a mixture of Bi and In powders. Sufficient growth time and In powder ratio are required for the generation of nanowires. Based on our observations, we propose a Au-catalyzed vapor–liquid–solid process as the dominant growth mechanism, in which In powder affects the morphology of nanowires. Photoluminescence (PL) analysis indicates that the nanowires exhibit emission bands centered at 1.58, 2.40, and 2.76 eV, regardless of the measurement temperature. The overall PL intensity tends to decrease as the measurement temperature increases.
Miscellaneous
S7
Seung Yoon Ryu, Chang Ho Lee, Il Soo Oh, Seung Yong Song, Kyu Hwan Hwang, Hyeon Seok Hwang, Man Hyeop Han, Byoung Har Hwang, Hong Koo Baik, Youn Sang Kim et al