Topical Reviews
272001
Youngwook Noh, Gyu Young Kim, Horim Lee, Jaehak Shin, Kunsik An, Manoj Kumar and Dongjin Lee
The intense pulsed light (IPL) post-treatment process has attracted great attention in the device fabrication due to its versatility and rapidity particularly for solution process functional structures in devices, flexible/printed electronics, and continuous manufacturing process. The metal oxide materials inherently have multi-functionality and have been widely used in form of thin films or nanostructures in device application such as thin film transistors, light emitting diodes, solar cells, supercapacitors, etc. The IPL treatment enhances the physical and/or chemical properties of the functional metal oxide through photothermal effects. However, most metal oxides are transparent to most range of visible light and require more energy for post-treatment. In this review, we have summarized the IPL post-treatment processes for metal oxide thin films and nanostructures in device applications. The sintering and annealing of metal oxides using IPL improved the device performances by employing additional light absorbing layer or back-reflector. The IPL process becomes an innovative versatile post-treatment process in conjunction with multi-functional metal oxides in near-future device applications.
272002
Liang Zou, Ke Xu, Huihui Tian and Ying Fang
Neural regulation techniques play an essential role in the functional dissection of neural circuits and also the treatment of neurological diseases. Recently, a series of nanomaterials, including upconversion nanoparticles (UCNPs), magnetic nanoparticles (MNPs), and silicon nanomaterials (SNMs) that are responsive to remote optical or magnetic stimulation, have been applied as transducers to facilitate localized control of neural activities. In this review, we summarize the latest advances in nanomaterial-mediated neural regulation, especially in a remote and minimally invasive manner. We first give an overview of existing neural stimulation techniques, including electrical stimulation, transcranial magnetic stimulation, chemogenetics, and optogenetics, with an emphasis on their current limitations. Then we focus on recent developments in nanomaterial-mediated neural regulation, including UCNP-mediated fiberless optogenetics, MNP-mediated magnetic neural regulation, and SNM-mediated non-genetic neural regulation. Finally, we discuss the possibilities and challenges for nanomaterial-mediated neural regulation.
272003
Kabin Lin, Chen Chen, Congsi Wang, Peiyuan Lian, Yan Wang, Song Xue, Jingjie Sha and Yunfei Chen
Nanopores are valuable single-molecule sensing tools that have been widely applied to the detection of DNA, RNA, proteins, viruses, glycans, etc. The prominent sensing platform is helping to improve our health-related quality of life and accelerate the rapid realization of precision medicine. Solid-state nanopores have made rapid progress in the past decades due to their flexible size, structure and compatibility with semiconductor fabrication processes. With the development of semiconductor fabrication techniques, materials science and surface chemistry, nanopore preparation and modification technologies have made great breakthroughs. To date, various solid-state nanopore materials, processing technologies, and modification methods are available to us. In the review, we outline the recent advances in nanopores fabrication and analyze the virtues and limitations of various membrane materials and nanopores drilling techniques.
Perspective
272501
Stephen Browne, Umesh V Waghmare and Anjali Singh
With an increasing demand for large-scale energy storage systems, there is a need for novel electrode materials to store energy in batteries efficiently. 2D materials are promising as electrode materials for battery applications. Despite their excellent properties, none of the available single-phase 2D materials offers a combination of properties required for maximizing energy density, power density, and cycle life. This article discusses how stacking distinct 2D materials into a 2D heterostructure may open up new possibilities for battery electrodes, combining favourable characteristics and overcoming the drawbacks of constituent 2D layers. Computational studies are crucial to advancing this field rapidly with first-principles simulations of various 2D heterostructures forming the basis for such investigations that offer insights into processes that are hard to determine otherwise. We present a perspective on the current methodology, along with a review of the known 2D heterostructures as anodes and their potential for Li and Na-ion battery applications. 2D heterostructures showcase excellent tunability with different compositions. However, each of them has distinct properties, with its own set of challenges and opportunities for application in batteries. We highlight the current status and prospects to stimulate research into designing new 2D heterostructures for battery applications.
Papers
Biology and medicine
275101
Yubin Xia, Bohou Li, Fengxia Zhang, Qiong Wu, Sichun Wen, Nan Jiang, Ding Liu, Cong Huang and Shuangxin Liu
Hydroxyapatite nanoparticles (HAP) have been widely used in various fields because of their natural biological origin and functional properties. The emerging evidence on their toxicities has attracted research interest. HAP-induced vascular smooth muscle cell (VSMC) damage is a key step in vascular calcification (VC), particularly in patients with chronic kidney disease. However, the injury effects and mechanism of action of HAP on VSMCs have not been extensively investigated. This study comprehensively characterized commercially available HAP and investigated its adverse biological effects in cultured A7R5 cells. In vitro experiments revealed that internalized HAP was localized in lysosomes, followed by the release of Ca2+ owing to the low pH microenvironment. Upon Ca2+ homeostasis, Ca2+ enters the mitochondria, leading to the simultaneous generation of reactive oxygen species (ROS). ROS subsequently attack mitochondrial transmembrane potentials, promote mitochondrial ROS production, and oxidize mitochondrial DNA (Ox-mtDNA). Mitochondrial permeability-transition pores open, followed by the release of more Ox-mtDNA from the mitochondria into the cytosol due to the redox imbalance. This activates NLRP3/caspase-1/gasdermin D-dependent pyroptosis and finally excretes inflammatory factors to induce VC; an antioxidant could rescue this process. It has been suggested that HAP could induce an imbalance in intracellular Ca2+ homeostasis in A7R5 cells, followed by the promotion of mitochondrial dysfunction and cell pyroptosis, finally enhancing VC. To detect the in vivo toxicity of HAP, mice were treated with Cy7-labelled HAP NPs for 24 h. In vivo results also demonstrated that HAP accumulated in the kidneys, accompined with increased Ca concentration, upregulated oxidative stress-related factor and kidney damage. Overall, our research elucidates the mechanism of calcium homeostasis and redox imbalance, providing insights into the prevention of HAP-induced cell death.
Electronics and photonics
275201
Ayman Rezk, Aisha Alhammadi, Wafa Alnaqbi and Ammar Nayfeh
In this work we use conductive atomic force microscopy (cAFM) to study the charge injection process from a nanoscale tip to a single isolated bilayer 2D MoS2 flake. The MoS2 is exfoliated and bonded to ultra-thin SiO2/Si substrate. Local current–voltage (IV) measurements conducted by cAFM provides insight in charge trapping/de-trapping mechanisms at the MoS2/SiO2 interface. The MoS2 nano-flake provides an adjustable potential barrier for embedded trap sites where the charge is injected from AFM tip is confined at the interface. A window of (ΔV ∼ 1.8 V) is obtain at a reading current of 2 nA between two consecutive IV sweeps. This is a sufficient window to differentiate between the two states indicating memory behavior. Furthermore, the physics behind the charge entrapment and its contribution to the tunneling mechanisms is discussed.
Patterning and nanofabrication
275301
Boyu Liu, Yongli Yu, Zhennan Hu, Mengke Li, Liuhong Ma, Haibin Sun, Jianxin Jia, Changhui Jiang, Yinghui Zhong, Yuwei Chen et al
Nanoimprint technology has the advantages of low cost, high precision, high fidelity and high yield. The metal nanoparticle fluid is non-Newtonian fluid, which is used as the imprint transfer medium to realize high fidelity of pattern because of its shear thinning effect. In order to functionalize the metal nanoparticles microstructure, the subsequent sintering step is required to form a metal interconnect wire. Metal interconnect wire with fewer grain boundaries and fewer holes have excellent mechanical and electronic properties. In this paper, the pseudoplastic metal nanoparticle fluid was formed by Ag nanoparticle and precursor solution, and then the thermal diffusion process was completed by microwave sintering after interconnects were embossed. The influence of microwave and thermal atmosphere on the microstructure and performance of Ag Interconnect wires was analyzed and discussed, and the Ag Interconnect wires performance was determined under the influence of time and temperature parameters. In our experiments, the interconnects after microwave sintering can achieve 39% of the conductivity of bulk silver. The microwave sintering module might be integrated as the heat treatment module of the metal micro/nano pattern directly imprint lithography.
Energy at the nanoscale
275401
Shizhi Dong, Yanshuai Li, Xudong Hu, Shiyin Sun, Bing Yan, Hongyu Hu, Xing Zhang, Zeliang Wang and Lin Guo
The stability of functional carriers single-atom catalysts can be effectively guaranteed by using stable mineral materials to support low dimensional catalytic materials. In this paper, the theoretical calculation of electrochemical hydrogen evolution reaction (HER) of the composite functional single-atom catalysts supported by single-atom Ni was carried out using first-principles method. And the original structure of MoS2, amorphous structure and S-vacancy structure are studied. Through the analysis and discussion of electronic properties, adsorption energy and active sites, it is found that Ni@Amorphous MoS2-FeS has excellent effect of hydrogen evolution in acidic environment, ΔGH is 0.312 eV, and the other two structures supporting Ni single-atom also have excellent HER properties in a wide range of pH. This design broadens the research idea of single-atom catalysts carriers and provides a new direction for the research and development of electrocatalytic materials.
275402
Aneela Tahira, Umair Aftab, Muhammad Yameen Solangi, Alessandro Gradone, Vittorio Morandi, Shymaa S Medany, Amal Kasry, Antonia Infantes-Molina, Ayman Nafady and Zafar Hussain Ibupoto
Strong demand for renewable energy resources and clean environments have inspired scientists and researchers across the globe to carry out research activities on energy provision, conversion, and storage devices. In this context, development of outperform, stable, and durable electrocatalysts has been identified as one of the major objectives for oxygen evolution reaction (OER). Herein, we offer facile approach for the deposition of few palladium oxide (PdO) nanoparticles on the cobalt–nickel bi-metallic sulphide (CoNi2S4) microstructures represented as PdO@ CoNi2S4 using ultraviolet light (UV) reduction method. The morphology, crystalline structure, and chemical composition of the as-prepared PdO@ CoNi2S4 composite were probed through scanning electron microscopy, powder x-ray diffraction, high resolution transmission electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy techniques. The combined physical characterization results revealed that ultraviolet light (UV) light promoted the facile deposition of PdO nanoparticles of 10 nm size onto the CoNi2S4 and the fabricated PdO@ CoNi2S4 composite has a remarkable activity towards OER in alkaline media. Significantly, it exhibited a low onset potential of 1.41 V versus reversible hydrogen electrode (RHE) and a low overpotential of 230 mV at 10 mA cm−2. Additionally, the fabricated PdO@ CoNi2S4 composite has a marked stability of 45 h. Electrochemical impedance spectroscopy has shown that the PdO@CoNi2S4 composite has a low charge transfer resistance of 86.3 Ohms, which favours the OER kinetics. The PdO@ CoNi2S4 composite provided the multiple number of active sites, which favoured the enhanced OER activity. Taken together, this new class of material could be utilized in energy conversion and storage as well as sensing applications.
275403
Silpasree S Jayasree, Shantikumar Nair and Dhamodaran Santhanagopalan
Extending the charge cutoff voltage of LiCoO2 (LCO) beyond 4.2 V is considered as a key parameter to obtain higher energy densities. Following gaps have been identified based on a thorough literature survey especially for higher cutoff voltage of nanoscale engineered LCO cathodes, (i) different metal oxides and metal fluoride surface coatings have been mostly done independently by different groups, (ii) room temperature performance was the focus with limited investigations at high temperature, (iii) nonexistence of low temperature cycling studies and (iv) no reports on high rate capability of LCO beyond 4.5 V (especially at 4.8 V) needs to be investigated. Herein, we report the effect of nanoscale engineering of LCO along with the role of coating chemistry and thickness to study its electrochemical performance at higher voltages and at wide operating temperatures. Surface coating was implemented with different metal oxides and a metal fluoride with tunable thickness. At 4.5 V, 5 wt% Al2O3 coated LiCoO2 (LCO@Al2O3-5) delivered a reversible capacity of 169 mAh g−1 at 100 mA g−1 and 151 mAh g−1 at high rate of 10 C (2 A g−1) and 72% retention at the end of 500 cycles. At 55 °C, it exhibited better stability over 500 cycles at 5 C and even at −12.5 °C it maintained 72% of its initial capacity after 100 cycles at 200 mA g−1. At 4.8 V cut-off, LCO@Al2O3-5 rendered reversible capacity of 213 mAh g−1 at 100 mA g−1, a high value compared to literatures reported for LCO. Also noted that it delivered a capacity of 126 mAh g−1 at a current density of 1 A g−1, whereas bare could only exhibit 66 mAh g−1 under same testing conditions. Enhanced performance of LCO@Al2O3-5 can be ascribed to the lower charge transfer resistance derived from the stable solid solution formation on the interface. Ex situ XRD and ex situ Raman analysis at different stages of charge/discharge cycles correlates the enhanced performance of LCO@Al2O3-5 with its structural stability and minimal structural degradation.
Sensing and actuating
275501
The following article is Open access
Cuifeng Ying, Jared Houghtaling and Michael Mayer
Resistive pulses generated by nanoparticles that translocate through a nanopore contain multi-parametric information about the physical properties of those particles. For example, non-spherical particles sample several different orientations during translocation, producing fluctuations in blockade current that relate to their shape. Due to the heterogenous distribution of electric field from the center to the wall of a nanopore while a particle travels through the pore, its radial position influences the blockade current, thereby affecting the quantification of parameters related to the particle’s characteristics. Here, we investigate the influence of these off-axis effects on parameters estimated by performing finite element simulations of dielectric particles transiting a cylindrical nanopore. We varied the size, ellipsoidal shape, and radial position of individual particles, as well as the size of the nanopore. As expected, nanoparticles translocating near the nanopore wall produce increase current blockades, resulting in overestimates of particle volume. We demonstrated that off-axis effects also influence estimates of shape determined from resistive pulse analyses, sometimes producing a multiple-fold deviation in ellipsoidal length-to-diameter ratio between estimates and reference values. By using a nanopore with the minimum possible diameter that still allows the particle to rotate while translocating, off-axis effects on the determination of both volume and shape can be minimized. In addition, tethering the nanoparticles to a fluid coating on the nanopore wall makes it possible to determine an accurate particle shape with an overestimated volume. This work provides a framework to select optimal ratios of nanopore to nanoparticle size for experiments targeting free translocations.
Materials: synthesis or self-assembly
275601
Shahram Shaybanizadeh, Alireza Najafi Chermahini and Rafael Luque
Formic acid (FA) has been recently regarded as a safe and stable source of hydrogen (H2). Selective and efficient dehydrogenation of FA by an effective catalyst under mild conditions is still a challenge. So, different molar ratios of bimetallic Pd–Au alloy nanoparticles were effectively stabilized and uniformly distributed on boron nitride nanosheets (BNSSs) surface via the precipitation process. Obtained catalysts were employed in FA decomposition for H2 production. Pd–Au@BNNS containing 3% Au and 5% Pd (Au.03Pd.05@BNNS) exhibited high activity and 100% H2 selectivity for H2 production from FA at 50 °C. In order to optimize the reaction conditions, various factors including, time, temperature, solvent, base type, and amount of catalyst, were examined.
275602
The following article is Open access
Wenkai Wu, Theodoros Pavloudis, Alexey V Verkhovtsev, Andrey V Solov’yov and Richard E Palmer
Neuromorphic computing systems may be the future of computing and cluster-based networks are a promising architecture for the realization of these systems. The creation and dissolution of synapses between the clusters are of great importance for their function. In this work, we model the thermal breakage of a gold nanofilament located between two gold nanoparticles via molecular dynamics simulations to study on the mechanisms of neuromorphic nanoparticle-based devices. We employ simulations of Au nanowires of different lengths (20–80 Å), widths (4–8 Å) and shapes connecting two Au1415 nanoparticles (NPs) and monitor the evolution of the system via a detailed structural identification analysis. We found that atoms of the nanofilament gradually aggregate towards the clusters, causing the middle of wire to gradually thin and then break. Most of the system remains crystalline during this process but the center is molten. The terminal NPs increase the melting point of the NWs by fixing the middle wire and act as recrystallization areas. We report a strong dependence on the width of the NWs, but also their length and structure. These results may serve as guidelines for the realization of cluster-based neuromorphic computing systems.
275603
Mohsen Shahrousvand, Mohsen Hajikhani, Leila Nazari, Amitis Aghelinejad, Mohammad Shahrousvand, Mohammad Irani and Amir Rostami
The novel pH-responsive polymer nanoparticles have been widely used for drug delivery and cancer therapy. The pH-sensitive nanoparticles include chemical structures that can accept or donate protons in response to an environmental pH change. Polybases which mostly contain alkaline groups such as amines and hydroxy, accept protons at low pH and are neutral at higher pH values. This study aimed to prepare pH-sensitive colloidal amphiphilic poly(vinyl alcohol-2-hydroxyethyl methacrylate) (PVA-PHEMA) copolymers in cancer therapy applications. For this purpose, poly(vinyl acetate-2-hydroxyethyl methacrylate) (PVAc-PHEMA) copolymer nanoparticles were synthesized in different polymerization medium fractions from water and methanol and different monomer feed concentration. Then acetate groups were hydrolyzed, and the PHEMA-PVA nanoparticles were synthesized. The nanoparticles were further characterized using dynamic light scattering, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis to identify the structural and morphological changes. The Methotrexate (MTX) was loaded into the nanoparticles, and drug release kinetics were evaluated. The results confirmed that PHEMA-PVA copolymeric nanoparticles could be favorably used in cancer therapy.
275604
The following article is Open access
Kai Cheng, Jie Zhou, Yujie Zhao, Yu Chen, Lan Ming, Da Huang, Rui Yang, Zhenyu Lin and Daozhen Chen
Herein, an amphiphilic block copolymer CD44-targeting peptide-conjugated polyethylene glycol-block-hydroxyethyl starch-block-poly (L-lactic acid) (CD44p-conjugated PEG-b-HES-b-PLA) are synthesized, which could self-assemble into the pH-responsive and CD44-targeting polymer micelles against breast cancer cells MDA-MB-231. Emodin (Emo) is a natural anthraquino with pharmacological activities in anti-tumor effects. However, Emo suffers from poor water solubility, low biocompatibility, rapid systemic elimination, and off-target side effects, resulting in unsatisfactory treatment outcomes. Nanotechnology-based drug delivery systems have proven great potential for cancer chemotherapy. The constructed polymeric micelles Emo@CD44p-PM have exhibited an average size of 154.5 ± 0.9 nm characterized by DLS and TEM. Further, the Emo@CD44p-PM have effective Emo-loading capacity, good thermal stability, and pH responsiveness. Intracellular uptake study shows the enhanced cellular internalization of Emo@CD44p-PM due to the increased exposure of CD44p enhances the cellular internalization of Emo@CD44p-PM effectively. Furthermore, the in vitro results showed Emo@CD44p-PM has been observed good biocompatibility and anti-tumor effects. Therefore, the polymeric micelles Emo@CD44p-PM provide a promising delivery strategy of targeted therapy for breast cancer.
Materials: properties, characterization or tools
275701
The following article is Open access
Bohayra Mortazavi, Masoud Shahrokhi, Brahmanandam Javvaji, Alexander V Shapeev and Xiaoying Zhuang
In the latest experimental success, NbOI2 two-dimensional (2D) crystals with anisotropic electronic and optical properties have been fabricated (Adv. Mater. 33 (2021), 2101505). In this work inspired by the aforementioned accomplishment, we conduct first-principles calculations to explore the mechanical, electronic, and optical properties of NbOX2 (X = Cl, Br, I) nanosheets. We show that individual layers in these systems are weakly bonded, with exfoliation energies of 0.22, 0.23, and 0.24 J m−2, for the isolation of the NbOCl2, NbOBr2, and NbOI2 monolayers, respectively, distinctly lower than those of the graphene. The optoelectronic properties of the single-layer, bilayer, and bulk NbOCl2, NbOBr2, and NbOI2 crystals are investigated via density functional theory calculations with the HSE06 approach. Our results indicate that the layered bulk NbOCl2, NbOBr2, and NbOI2 crystals are indirect gap semiconductors, with band gaps of 1.79, 1.69, and 1.60 eV, respectively. We found a slight increase in the electronic gap for the monolayer and bilayer systems due to electron confinement at the nanoscale. Our results show that the monolayer and bilayer of these novel 2D compounds show suitable valence and conduction band edge positions for visible-light-driven water splitting reactions. The first absorption peaks of these novel monolayers along the in-plane polarization are located in the visible range of light which can be a promising feature to design advanced nanoelectronics. We found that the studied 2D systems exhibit highly anisotropic mechanical and optical properties. The presented first-principles results provide a comprehensive vision about direction-dependent mechanical and optical properties of NbOX2 (X = Cl, Br, I) nanosheets.
275702
Manisha Sharma, Ashish Kumar and Venkata Krishnan
The low light absorption and rapid recombination of photogenerated charge carriers are primary contributors to the low activity of various photocatalysts. Fabrication of oxygen vacancy defect-rich materials for improved photocatalytic activities has been attracting tremendous attention from researchers all over the world. In this work, we have compared the photocatalytic activities of oxygen vacancy-rich Bi2MoO6 (BMO-OV) and Bi2WO6 (BWO-OV) for the degradation of a model pharmaceutical pollutant, ciprofloxacin under visible light irradiation. The photocatalytic activity was increased from 47% to 77% and 40% to–67% for BMO-OV and BWO-OV, respectively in comparison to pristine oxides. This enhancement can be ascribed to suppressed charge carrier recombination and increased surface active sites. In addition, scavenger studies have been done to explain the role of photoinduced charge carriers in the degradation mechanism. Moreover, oxygen vacancy-rich photocatalysts have remained stable even after three consecutive cycles, making them promising materials for practical applications. Overall, this work provides deeper insight into the design and development of oxygen vacancy-rich materials.
275703
A Allemand, F Kulzer, B Mahler, C Dujardin and J Houel
We have synthesized CdS(1.3 nm)/CdSe(1.7 nm)/CdS(3.4 nm) spherical quantum wells (SQWs) with a diameter of 13 nm and demonstrated the first photon-antibunching from their emission, labelling them as single-photon sources. Antibunching survives even at high excitation intensities, ruling-out strong emission from the bi-exciton. For the largest intensities, antibunching coupled to spectral measurements reveal the signature of a blue-shifted emission, associated to an irreversible photo-aging effect. A statistical analysis over 26 SQWs demonstrates a moderate correlation between the energy of the main and the blue-shifted emission. Intensity-timetraces recorded on 28 single SQWs show weak blinking, with a median time spent in the bright state of 89%. Their emission decay reveals a complex dynamic with either three or four exponential components. We assigned three of them to the neutral and singly-charged excitons and the slowest to defect emission. While SQWs have been initially designed for laser-oriented applications, we demonstrate that they can serve as efficient single-photon sources.
275704
Xinyue Zhang, Nianyi Xie, Ying Guo, Rongxiu Guo, Tong Jiang, Yao Wang, Yiming Wang, Dun Niu, Yang Qi and Hong-bin Sun
Actuated by the non-ionic heavy metal of antimony (Sb) contaminants with undesired toxicity to the environment and human health, capturing Sb is urgent to remedy contaminated water. Herein, the lamellar MnCo hydrotalcite was grown on catkin-derived biochar through the in situ etching of ZIF-L to construct a hierarchical microtube@nanosheet hybrid (CLMH) for Sb immobilization. The adsorption behaviour and mechanism of trivalent antimony (Sb (III)) on the CLMH were investigated. The CLMH shows good pH applicability for capturing Sb(III) at pH from 2 to 9. The excellent adsorption capacity of CLMH for Sb(III) is 247.62 mg g−1 at 303 K, and the endothermic process is proved by the positive value of Δ
(10.54 kJ mol−1). The adsorption process is fitted with the intra-particle diffusion model, which can be described with external mass transfer, intraparticle diffusion in pores, and equilibrium stage. The adsorption mechanism is proved, which includes the bind of Metal–O–Sb bonds by inner-sphere complex, the embedding of Sb in the intercalation of hydrotalcite, redox between Mn and Sb, and functional groups dependent anchoring effect. The work benefits the understanding of the antimony removal behaviour over the hierarchical microtube@nanosheet hybrids.
275705
The following article is Open access
Bojana Višić, Luka Pirker, Marko Opačić, Ana Milosavljević, Nenad Lazarević, Boris Majaron and Maja Remškar
Four distinct tungsten suboxide (WO3–x) nanomaterials were synthesized via chemical vapour transport reaction and the role of their crystal structures on the optical properties was studied. These materials grow either as thin, quasi-2D crystals with the WnO3n-1 formula (in shape of platelets or nanotiles), or as nanowires (W5O14, W18O49). For the quasi-2D materials, the appearance of defect states gives rise to two indirect absorption edges. One is assigned to the regular bandgap occurring between the valence and the conduction band, while the second is a defect-induced band. While the bandgap values of platelets and nanotiles are in the upper range of the reported values for the suboxides, the nanowires’ bandgaps are lower due to the higher number of free charge carriers. Both types of nanowires sustain localized surface plasmon resonances, as evidenced from the extinction measurements, whereas the quasi-2D materials exhibit excitonic transitions. All four materials have photoluminescence emission peaks in the UV region. The interplay of the crystal structure, oxygen vacancies and shape can result in changes in optical behaviour, and the understanding of these effects could enable intentional tuning of selected properties.
275706
Bowen Wang, Xuefei Yan, Hejin Yan and Yongqing Cai
The thermal conductivities of pristine and defective single-layer tungsten diselenide (WSe2) are investigated by using equilibrium molecular dynamics method. The thermal conductivity of WSe2 increases dramatically with size below a characteristic of ~5 nm and levels off for broader samples and reaches a constant value of ~2 W/mK. By introducing atomic vacancies, we discovered that the thermal conductivity of WSe2 is significantly reduced. In particular, the W vacancy has a greater impact on thermal conductivity reduction than Se vacancies: the thermal conductivity of pristine WSe2 is reduced by ~60% and ~70% with the adding of ~1% of Se and W vacancies, respectively. The reduction of thermal conductivity is found to be related to the decrease of mean free path (MFP) of phonons in the defective WSe2. The MFP of WSe2 decreases from ~4.2 nm for perfect WSe2 to ~2.2 nm with the addition of 0.9% Se vacancies. More sophisticated types of point defects, such as vacancy clusters and anti-site defects, are explored in addition to single vacancies and are found to dramatically renormalize the phonons. The reconstruction of the bonds leads to localized phonons in the forbidden gap in the phonon density of states which leads to a drop in thermal conduction. This work demonstrates the influence of different defects on the thermal conductivity of single-layer WSe2, providing insight into the process of defect-induced phonon transport as well as ways to improve heat dissipation in WSe2-based electronic devices.
275707
Wenzhi Zhang, Lijuan Hao, Luwen Shang, Dong-feng Chai, Yueyue Gao, Jinlong Li, Ming Zhao, Rong Liu, Zhuanfang Zhang and Guohua Dong
In this work, a kind of boron doped carbon spheres (B-CSs) was successfully synthesized utilizing maize starch as carbon source and boric acid as dopant via facile solvothermal method. The chemical structure of the prepared B-CSs was systemically investigated by TEM, FT-IR, XRD, XPS and EDS. The synthesized B-CSs feature spherical structure with average size of ∼254 nm and exhibit strong photoluminescence (PL) with maximum emission at a wavelength of ∼453 nm under irradiation at 350 nm, leading to a quantum yield of 6.2%. Furthermore, the aqueous pH and Cr(VI) has a significantly various impact on the PL intensity of B-CSs, which can be flexibly utilized as the PL sensor for detection aqueous pH and Cr(VI) in aqueous. Particularly, the B-CSs have a desirable sensitivity and selectivity for detection of Cr(VI) with a low detection limit of ∼0.34 μmol l−1. Conclusively, our work provides a novel and dual-functional fluorescent sensor for detection of the pH and toxic metal ions in water environment.
275708
Cassandre Miralaei, Sylvie Le Floch, Regis Debord, Hung V Nguyen, Julio C Da Silva, Alfonso San-Miguel, Hélène Le Poche, Stephane Pailhès and Vittoria Pischedda
We have explored the effect of high pressure post-treatment in optimizing the properties of carbon nanotube yarns and found that the application of dry hydrostatic pressure reduces porosity and enhances electrical properties. The CNT yarns were prepared by the dry-spinning method directly from CNT arrays made by the hot filament chemical vapour deposition (HF-CVD) process. Mechanical hydrostatic pressure up to 360 MPa induces a decrease in yarn resistivity between 3% and 35%, associated with the sample’s permanent densification, with CNT yarn diameter reduction of 10%–25%. However, when increasing the pressure in the 1–3 GPa domain in non-hydrostatic conditions, the recovered samples show lower electrical conductivity. This might be due to concomitant macroscopic effects such as increased twists and damage to the yarn shown by SEM imaging (caused by strong shear stresses and friction) or by the collapse of the CNTs indicated by in situ high pressure Raman spectroscopy data.
275709
Hossein Nikmanesh, Elnaz Jaberolansar, Parviz Kameli and Ali Ghotbi Varzaneh
This work reports cation distribution, magnetic, structural, and morphological studies of rare-earth Pr doped cobalt ferrite nanoparticles CoFe2−xPrxO4 (x = 0, 0.02, 0.04, 0.06 at%) fabricated by sol-gel auto-combustion method. X-ray diffraction analysis, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and Fourier-transform infrared (FTIR) microscopy were utilized to study the structural and morphological characteristics of the prepared samples. Rietveld refinement by the Material Analyses Using Diffraction (MAUD) software showed the formation of mono-phase cubic spinel structure with Fd-3m space group; however, there was a trace of impure PrFeO3 phase for the sample CoFe1.96Pr0.04O4 (x = 0.06). Cation distribution was inferred from the XRD patterns using MAUD program. FESEM analysis revealed the spherical-shaped particles with dimensions close to the data extracted from XRD analysis and HRTEM images confirmed it. FTIR measurements revealed the presence of two prominent stretching vibrational modes confirming the successful formation of ferrite spinel structure. Magnetic properties of the nanoparticles were measured at two different temperatures 300 K and 10 K. For the low temperature of 10 K a high sensitive measurement method as Superconducting Quantum Interference Device (SQUID) magnetometry was used and Vibrating Sample Magnetometer (VSM) recorded the magnetic data at 300 K. Comparison of the magnetic results exhibited a significant enhancement with temperature drop due to the reduction in thermal fluctuations. Paramagnetic nature of rare-earth ions may be the main reason for MS decrement from 76 emu g−1 (x = 0.0) to 60 emu g−1 (x = 0.02) at 300 K. At 10 K, the estimated cation distribution played a vital role in justification of obtained magnetic results. All the obtained data showed that the synthesized magnetic nanoparticles can be implemented in permanent magnet industry and information storage fields, especially when it comes to lower temperatures.
275710
Jing Wu, E Zhou, Zhenzhen Qin, Xiaoliang Zhang and Guangzhao Qin
The negative Poisson’s ratio (NPR) is a novel property of materials, which enhances the mechanical feature and creates a wide range of application prospects in lots of fields, such as aerospace, electronics, medicine, etc. Fundamental understanding on the mechanism underlying NPR plays an important role in designing advanced mechanical functional materials. However, with different methods used, the origin of NPR is found different and conflicting with each other, for instance, in the representative graphene. In this study, based on machine learning technique, we constructed a moment tensor potential for molecular dynamics (MD) simulations of graphene. By analyzing the evolution of key geometries, the increase of bond angle is found to be responsible for the NPR of graphene instead of bond length. The results on the origin of NPR are well consistent with the start-of-art first-principles, which amend the results from MD simulations using classic empirical potentials. Our study facilitates the understanding on the origin of NPR of graphene and paves the way to improve the accuracy of MD simulations being comparable to first-principle calculations. Our study would also promote the applications of machine learning interatomic potentials in multiscale simulations of functional materials.
275711
Chun-Chu Lin, Po-Hsun Chen, Min-Chen Chen, Min-Chuan Wang, Chih-Cheng Yang, Hui-Chun Huang, Chung-Wei Wu, Sheng-Yao Chou, Tsung-Ming Tsai and Ting-Chang Chang
In this study, we have investigated the improvements in the performance of an all-solid-state complementary electrochromic device (ECD) by using the proposed high pressure treatment (HPT). The Li:Ta2O5 electrolyte layer was recrystallized by the HPT utilizing pressurized CO2 gas (∼200 atm) and at low temperature (<60 °C), which enhanced the coloration performance of the WO3/Li:Ta2O5/NiO complementary ECD by ∼20%. The reliability and durability of the ECD were confirmed by long term transmittance retention measurements, which indicated an improvement in the coloration performance by ∼14% upon the release of the bias voltages. The ability of the devices that were fabricated with and without the HPT process to withstand high temperature environments was also verified. In addition, photoluminescence (PL) and transmittance measurements were carried out to examine the effects of the bonding between WO3 and NiO. To determine the differences in lithium-ion (Li+) injection, electrical measurements were performed by utilizing varying pulse rising speeds to confirm device characteristics. The materials were characterized in terms of their composition and structure using high-resolution transmission electron microscopy along with energy-dispersive x-ray spectroscopy. Finally, a mechanistic model has been proposed to explain the improved EC characteristics based on the amorphous to crystalline transition accompanying the HPT process.
275712
Yangchun Feng, Wangyang Yang, Yufang Li and Honglie Shen
In recent years, high-performance acetone gas sensors have attracted great attention for their potential in noninvasive blood glucose monitoring. In this work, black TiO2 (B-TiO2) was introduced as an electron trapping layer between TiO2 and ZnO to form TiO2@B-TiO2@ZnO core–shell nanoparticles, through a simple and safe method. The acetone sensing performance of TiO2@B-TiO2@ZnO varied with the thickness of ZnO. Because of the electron trapping effect of the introduced B-TiO2 layer, the best performing sample exhibited a low optimal operating temperature of 275 °C and a high response of 49.25–50 ppm acetone. In addition, a low detection limit of 170 ppb was obtained. The pretty selectivity of the sample was also been proved. The mechanism of enhanced acetone response was explained by the energy band-based model of TiO2@B-TiO2@ZnO core–shell nanoparticle and depletion layer theory.
Comment
Comment and Reply
278001
Bohayra Mortazavi and Mehdi Neek-Amal
Recently, Bafekry et al (2021 Nanotechnology32 215702) predicted a novel two-dimensional carbon nitride with an egg-comb-like structure and a C6N stoichiometry. Their density functional theory results reveal the thermal stability of this structure at 300 K. They also examined the thermoelectric properties of this monolayer up to 500 K. By adopting the same methodology employed in the original work by Bafekry et al (2021 Nanotechnology32 215702), we show that this monolayer is thermally unstable and cannot be employed for practical applications. Aforementioned theoretical work also includes inaccuracies in the evaluation of thermoelectric properties of the C6N monolayer, as they did not consider the contribution of the lattice thermal conductivity.