Perspective
112501
Hongyao Zhou and Ping Liu
Protection of lithium metal has been one of the great challenges to realize a long-life, high-energy-density battery. Polymer coatings on lithium metal surface have been proven to be an effective protection method in terms of improved morphology, higher coulombic efficiency, and a longer cycle life. However, there is a variety of design principles of polymer coatings proposed by the research community, and the influence of polymer swelling in liquid electrolytes remains poorly understood. Herein we use crosslinking density and solvent–polymer interaction to quantitatively explain the mechanical property and the ion-transport property of polymer coatings when swollen in liquid electrolytes. Low crosslinking density is beneficial for reducing the rigidity and enhancing the viscosity of the polymer. Ion conductivity increases with the swelling ratio, and activation energy of lithium-ion transport increases in a polar polymer with strong ion–polymer coupling. We propose that polymer coatings must be combined with the emerging electrolytes with unconventional solvent compositions to realize a practical high-performance lithium metal battery. This study can provide design guidelines for polymer coatings through the optimized interactions with upcoming high-performance electrolytes.
Papers
Biology and medicine
115101
Aqsa Arshad, Tahira Qamar Nisar, Muhammad Zulqurnain, Robina Khan Niazi and Qaisar Mansoor
The world is facing alarming challenges of environmental pollution due to uncontrolled water contamination and multiple drug resistance of pathogens. However, these challenges can be addressed by using novel nanocomposites materials such as, SnO2/graphene nanopaletelets (GNPs) nanocomposites remarkably. In this work, we have prepared SnO2 nanorods and SnO2/GNPs nanocomposites (GS-I and GS-II) with size of 25 ± 6 nm in length and 4 ± 2 nm in diameter. The optical bandgap energies change from 3.14 eV to 2.80 eV in SnO2 and SnO2/GNPs nanocomposite. We found that SnO2/GNPs nanocomposite (GS-II) completely removes (99.11%) malachite green in 12 min, under UV light exposure, while under same conditions, SnO2 nanorods removes only 37% dye. Moreover, visible light exposure resulted in 99.01% removal of malachite green in 15 min by GSII as compared to 24.7% removal by SnO2. In addition, GS-II nanocomposite inhibits 79.57% and 78.51% growth of P. aeruginosa and S. aureus respectively. A synchronized contribution of SnO2 and GNPs makes SnO2/GNPs nanocomposites (GS-II) an innovative multifunctional material for simultaneous fast and complete removal of malachite green and inhibition of drug resistant pathogens.
Electronics and photonics
115201
Nishattasnim Liza, Dylan Murphey, Peizhong Cong, David W Beggs, Yuihui Lu and Enrique P Blair
Mixed-valence compounds may provide molecular devices for an energy-efficient, low-power, general-purpose computing paradigm known as quantum-dot cellular automata (QCA). Multiple redox centers on mixed-valence molecules provide a system of coupled quantum dots. The configuration of mobile charge on a double-quantum-dot (DQD) molecule encodes a bit of classical information robust at room temperature. When arranged in non-homogeneous patterns (circuits) on a substrate, local Coulomb coupling between molecules enables information processing. While single-electron transistors and single-electron boxes could provide low-temperature solutions for reading the state of a ∼1 nm scale molecule, we propose a room-temperature read-out scheme. Here, DQD molecules are designed with slightly dissimilar quantum dots. Ab initio calculations show that the binary device states of an asymmetric molecule have distinct Raman spectra. Additionally, the dots are similar enough that mobile charge is not trapped on either dot, allowing device switching driven by the charge configuration of a neighbor molecule. A technique such as tip-enhanced Raman spectroscopy could be used to detect the state of a circuit comprised of several QCA molecules.
115202
Qinghai Zhu, Peng Ye, Youmei Tang, Xiaodong Zhu, Zhiyuan Cheng, Jing Xu and Mingsheng Xu
Infrared optoelectronic devices are capable of operating in harsh environments with outstanding confidentiality and reliability. Nevertheless, suffering from the large band gap value, most semiconductor materials are difficult to detect infrared light signals. Here, Mg2Si/Si heterojunction photodetectors (PDs), which possess the advantages of low-cost, easy process, environmental friendliness, and compatibility with silicon CMOS technology, have been reported with a broadband spectral response as tested from 532 to 1550 nm under zero-bias. When the incident light wavelength is 808 nm, the Mg2Si/Si photodetector (PD) has a responsivity of 1.04 A W−1 and a specific detectivity of 1.51 × 1012 Jones. Furthermore, we find that the Ag nanoparticles (Ag_NPs) assembled on the Mg2Si layer can greatly improve the performance of the Mg2Si/Si PD. The responsivity and specific detectivity of Mg2Si/Si device with Ag_NPs under 808 nm illumination are 2.55 A W−1 and 2.60 × 1012 Jones, respectively. These excellent photodetection performances can be attributed to the high-quality of our grown Mg2Si material and the strong built-in electric field effect in the heterojunction, which can be further enhanced by the local surface plasmon effect and local electromagnetic field induced by Ag_NPs. Our study would provide significant guidance for the development of new self-powered infrared PDs based on silicon materials.
115203
Hao Wu, Fanming Meng, Xingbing Liu and Bo Yu
In this paper, Z-scheme Bi2MoO6/CNTs/g-C3N4 composite photocatalysts were prepared through a simple hydrothermal method. The analysis was performed by XRD, FT-IR, SEM, EDS, TEM, HRTEM, XPS, BET, UV–Vis diffuse reflectance and PL spectrums. Various analyses show that CNTs not only act as excellent charge transfer bridges, but also enable a formation of the Z-scheme of charge transfer mechanism between Bi2MoO6 and g-C3N4. This process not only effectively isolates electrons and holes, but also prolongs electron–hole pair lifetimes, resulting in a substantial improvement in the photocatalytic performance of the composite photocatalyst. Best photocatalytic degradation performance was shown by Bi2MoO6/CNTs/g-C3N4 composite photocatalyst under simulated sunlight, while the composite photocatalyst still maintained extremely high degradation performance in cycling tests.
115204
Minghong Xie, Wenxiao Gong, Lei Kong, Yang Liu, Yang Mi, Heng Guo and Sheng-Nian Luo
Perovskite nanocrystals (NCs) have emerged as attractive gain materials for solution-processed microlasers. Despite the recent surge of reports in this field, it is still challenging to develop low-cost perovskite NC-based microlasers with high performance. Herein, we demonstrate low-threshold, spectrally tunable lasing from ensembles of CsPbBr3 NCs deposited on silica microspheres. Multiple whispering-gallery-mode lasing is achieved from individual NC/microspheres with a low threshold of ∼3.1 μJ cm−2 and cavity quality factor of ∼1193. Through time-resolved photoluminescence measurements, electron–hole plasma recombination is elucidated as the lasing mechanism. By tuning the microsphere diameter, the desirable single-mode lasing is successfully achieved. Remarkably, the CsPbBr3 NCs display durable room-temperature lasing under ∼107 shots of pulsed laser excitation, substantially exceeding the stability of conventional colloidal NCs. These CsPbBr3 NC-based microlasers can be potentially useful in photonic applications.
115205
Chao Chen, Tao Lin, Jianteng Niu, Yiming Sun, Liu Yang, Wang Kang and Na Lei
Magnetic skyrmions, which are particle-like spin structures, are promising information carriers for neuromorphic computing devices due to their topological stability and nanoscale size. In this work, we propose controlling magnetic skyrmions by electric-field-excited surface acoustic waves in neuromorphic computing device structures. Our micromagnetic simulations show that the number of created skyrmions, which emulates the synaptic weight parameter, increases monotonically with increases in the amplitude of the surface acoustic waves. Additionally, the efficiency of skyrmion creation is investigated systemically with a wide range of magnetic parameters, and the optimal values are presented accordingly. Finally, the functionalities of short-term plasticity and long-term potentiation are demonstrated via skyrmion excitation by a sequence of surface acoustic waves with different intervals. The application of surface acoustic waves in skyrmionic neuromorphic computing devices paves a novel approach to low-power computing systems.
Patterning and nanofabrication
115301
Rama K Vasudevan, Ayana Ghosh, Maxim Ziatdinov and Sergei V Kalinin
Atom-by-atom assembly of functional materials and devices is perceived as one of the ultimate targets of nanotechnology. Recently it has been shown that the beam of a scanning transmission electron microscope can be used for targeted manipulation of individual atoms. However, the process is highly dynamic in nature rendering control difficult. One possible solution is to instead train artificial agents to perform the atomic manipulation in an automated manner without need for human intervention. As a first step to realizing this goal, we explore how artificial agents can be trained for atomic manipulation in a simplified molecular dynamics environment of graphene with Si dopants, using reinforcement learning. We find that it is possible to engineer the reward function of the agent in such a way as to encourage formation of local clusters of dopants under different constraints. This study shows the potential for reinforcement learning in nanoscale fabrication, and crucially, that the dynamics learned by agents encode specific elements of important physics that can be learned.
115302
Huijuan Shen, Yaode Wang, Liang Cao, Ying Xie, Lu Wang, Xueying Chu, Kaixi Shi, Shenzhi Wang, Miaomiao Yu, Ri Liu et al
The micro-stripe structure was prepared by laser interference induced forward transfer technique, composed of Ag nano-particles (NPs). The effects of the film thickness with the carbon nano-particles mixed polyimide (CNPs@PI), Ag film thickness, and laser fluence were studied on the transferred micro-stripe structure. The periodic Ag micro-stripe with good resolution was obtained in a wide range of CNPs@PI film thickness from ∼0.5 to ∼1.0 μm for the Ag thin film ∼20 nm. The distribution of the Ag NPs composing the micro-stripe was compact. Nevertheless, the average size of the transferred Ag NPs was increased from ∼41 to ∼197 nm with the change of the Ag donor film from ∼10 to ∼40 nm. With the increase of the laser fluence from 102 to 306 mJ·cm−2 per-beam, the transferred Ag NPs became aggregative, improving the resolution of the corresponding micro-stripe. Finally, the transferred Ag micro-stripe exhibited the significant surface enhanced Raman scattering (SERS) property for rhodamine B (RhB). While the concentration of the RhB reached 10–10 mol·L−1, the Raman characteristic peaks of the RhB were still observed clearly at 622, 1359 and 1649 cm−1. These results indicate that the transferred Ag micro-stripe has potential application as a SERS chip in drug and food detection.
Energy at the nanoscale
115401
Jiabing Liu, Chenchen Hu, Wanjie Gao, Haipeng Li and Yan Zhao
Lithium–sulfur (Li–S) batteries with tremendous energy density possess great promise for the next-generation energy storage devices. Even though, the shuttle effect and sluggish redox kinetics of lithium polysulfides (LiPSs) seriously restrict practical applications of Li–S batteries. Herein, a three-dimensionally ordered macro/mesoporous TiN (3DOM TiN) nanostructure is established via using poly (methyl methacrylate) PMMA spheres as template. The interconnected macro/mesoporous channels are constructed to effectively alleviate the stacking of composite materials and render a large portion of inherent active sites exposed on the surface region. Moreover, TiN exhibits high electrical conductivity, which efficiently enhances charge-transfer kinetics and guarantees the favorable electrochemical performance of sulfur cathode. More importantly, the as-prepared 3DOM TiN suppresses the shuttle effect and improves the redox kinetics significantly due to strong affinity toward LiPSs. Attributed to these unique features, the S/3DOM TiN electrode achieves an ultrahigh initial discharge capacity of 1187 mAh g−1 at 0.2 C, and stable cycling performance of 552 mAh g−1 over 500 cycles at 1 C. Meanwhile, the discharge capacity retention of 701 mAh g−1 (3.5 mAh cm−2) can be endowed for the S/3DOM TiN electrode under high sulfur loading of 5 mg cm−2 after 100 cycles at 0.1 C. Therefore, the 3DOM TiN nanostructure electrocatalyst provides a promising path for developing practically useable Li–S batteries.
115402
Yan Ran, Ping Hong, Jie Ren, Bingsen Wang, Mingjing Xiao, Yunhua Chen, Xuechun Xiao and Yude Wang
Aqueous zinc-ion batteries (ZIBs) is a potential energy storage system due to its advantages of low cost, good safety, and high theoretical capacity (820 mAh g−1). However, the lack of cathode materials with long cycle stability severely restricts the development of ZIBs. In this paper, V2O5/ NaV6O15 nanocomposites are synthesized by molten salt method in one step and used as cathode material for ZIBs, which have good electrochemical performances. The specific capacity of the materials remain 160 mAh g−1 when the current density is 0.5 A g−1 after 1000 cycles, and the capacity retention rate is 102.03% when the current density is 5 A g−1 for 1000 cycles. This is mainly due to the large number of active sites generated by crystal defects and the synergistic interaction between the dual-phase materials, which reduces the stress of ions inserted/extracted during the Zn2+ storage process and improves the electrochemical performance.
115403
Longgang Lu, Bin Zhang, Juanjuan Song, Haiwen Gao, Zongdeng Wu, Honglong Shen, Yujunwen Li, Wu Lei and Qingli Hao
In this paper, a carbon nanofiber (CNF) hybrid nanomaterial composed of MnO–Sn cubes embedding in nitrogen-doped CNF (MnO–Sn@CNF) is synthesized through electrospinning and post-thermal reduction processes. It exhibits good electrochemical lithium-ion storage performance as the anode, such as high reversible capacity, outstanding cycle performance (754 mAh g−1 at 1 A g−1 after 1000 cycles), and good rate capability (447 mAh g−1 at 5 A g−1). The excellent electrochemical properties are derived from a unique nanostructure design. MnO–Sn@CNF has a three-dimensional conductive network with a stable core–shell structure, which improves the electrical conductivity and mechanical stability of the materials. In addition, the mesopores on the surface of carbon fibers can shorten the diffusion distance of lithium ions and promote the combination of active sites of the material with lithium ions. The internal MnO and Sn form a heterostructure, which enhances the stability of the physical structure of the electrode material. This material design method provides a reference strategy for the development of high-performance lithium-ion batteries anode.
115404
Kang Zhong, Xingwang Zhu, Jinman Yang, Zhao Mo, Junchao Qian, Minqiang He, Yanhua Song, Jinyuan Liu, Hanxiang Chen, Huaming Li et al
Photocatalytic conversion of carbon dioxide into fuels and valuable chemicals is a promising method for carbon neutralization and solving environmental problems. Through a simple thermal-oxidative exfoliation method, the O element was doped while exfoliated bulk g-C3N4 into ultrathin structure g-C3N4. Benefitting from the ultrathin structure of g-C3N4, the larger surface area and shorter electrons migration distance effectively improve the CO2 reduction efficiency. In addition, density functional thory computation proves that O element doping introduces new impurity energy levels, which making electrons easier to be excited. The prepared photocatalyst reduction of CO2 to CO (116 μmol g−1 h−1) and CH4 (47 μmol g−1 h−1).
115405
Kai Zhang, You Li, Hongyu Wang, Zisheng Zhang, Guihua Liu and Yongguang Zhang
The development of efficient sulfur host materials to address the shuttle effect issues of lithium polysulfides (LiPSs) is crucial in the lithium–sulfur (Li–S) batteries but still challenging. In the present study, a novel yolk shell structured MgCo-LDH/ZIF-67 composite is designed as Li–S battery cathode. In this composite, the shell layer is MgCo layered double hydroxide constructed by partially etching ZIF-67 nanoparticle by Mg2+, and the core is the unreacted ZIF-67 particle. The unique yolk shell structure not only provides abundant pores for sulfur accommodation, but also facilitates the electrolyte penetration and ion transport. The ZIF-67 core exhibits strong polar adsorption to LiPSs through the Lewis acid-base interactions, and the micropores/mesoporous can further trap LiPSs. Meanwhile, the MgCo-LDH shell exposes enough sulfur-philic sites for enhancing chemisorption and catalyzes LiPSs conversion. As a result, when MgCo-LDH/ZIF-67 is used as sulfur host in the cathode, the cell achieves a high discharge capacity of 1121 mAh g−1 at 0.2 C, and an areal capacity of 5.0 mAh cm−2 under high sulfur loading of 5.8 mg cm−2. The S/MgCo-LDH/ZIF-67 electrode holds a promising potential for the development of Li–S batteries.
Materials: synthesis or self-assembly
115601
Changning Li, Saurabh Khuje, Donald Petit, Yulong Huang, Aaron Sheng, Lu An, Massimigliano Di Luigi, Alireza Jalouli, Marieross Navarro, Abdullah Islam et al
As one of the conductive ink materials with high electric conductivity, elemental copper (Cu) based nanocrystals promise for printable electronics. Here, single crystalline Cu nanoplates were synthesized using a facile hydrothermal method. Size engineering of Cu nanoplates can be rationalized by using the LaMer model and the versatile Cu conductive ink materials are suitable for different printing technologies. The printed Cu traces show high electric conductivity of 6 MS m−1, exhibiting electro-magnetic interference shielding efficiency value of 75 dB at an average thicknesses of 11 μm. Together with flexible alumina ceramic aerogel substrates, it kept 87% conductivity at the environmental temperature of 400 °C, demonstrating the potential of Cu conductive ink for high-temperature printable electronics applications.
115602
Li Shen, Sikun Zhou, Fei Huang, Hao Zhou, Hong Zhang, Shutong Wang and Shouhuan Zhou
In this work, graphene quantum dots (GQDs) were synthesized by femtosecond laser ablation in liquid using laser induced graphene as the carbon source. Nitrogen-doped graphene quantum dots (N-GQDs) were successfully synthesized by adding ammonia water to the graphene suspension. The GQDs/N-GQDs structure consist of a graphitic core with oxygen and nitrogen functionalities with particle size less than 10 nm, as demonstrated by x-ray photoelectron spectroscopy, Fourier infrared spectrometer spectroscopy, and transmission electron microscopy. The absorption peak, PL spectrum, and quantum yield of the N-GQDs were significantly enhanced compared with the undoped GQDs. Further, the possible mechanism of synthesis GQDs was discussed. Furthermore, the N-GQDs were used as a fluorescent probe for detection of Fe3+ ions. The N-GQDs may extend the application of graphene-based materials to bioimaging, sensor, and photoelectronic.
115603
Vladimir V Dirko, Kirill A Lozovoy, Andrey P Kokhanenko and Alexander V Voitsekhovskii
In this paper, we analyze superstructural transitions during epitaxial growth of two-dimensional layers and the formation of quantum dots by the Stranski–Krastanov mechanism in elastically stressed systems by the reflection high-energy electron diffraction method. Detailed dependences of the periodicity parameter N of the 2 × N reconstruction on the effective thickness of the deposited material in a wide range of growth temperatures during epitaxy of germanium on a silicon surface with a crystallographic orientation (001) are obtained. Superstructural transitions and the change in the value of the parameter N at low temperatures of epitaxy in this system have been investigated for the first time. It is shown that the length of dimer rows in such a reconstruction during the growth of pure germanium on silicon can reach a value of no less than N = 11. A relationship is found between the value of the parameter N, determined by elastic strains in the system, and the critical thickness of the transition from two-dimensional to three-dimensional growth. Based on this relationship, a physical mechanism is proposed that explains the nature of the temperature dependence of the critical thickness of the Stranski–Krastanov transition, which has been the subject of constant scientific disputes until now.
Materials: properties, characterization or tools
115701
Byunguk Kim, Yeonsik Choi, Dahyun Lee, Seonghak Cheon, Younghun Byun and Hyeongtag Jeon
We study the rutile-TiO2 film deposition with a high-k value using a SnO2 seed layer and a low temperature heat treatment. Generally, heat treatment over 600 °C is required to obtain the rutile-TiO2 film. However, By using a SnO2 seed layer, we obtained rutile-TiO2 films with heat treatments as low as 400 °C. The XPS analysis confirms that the SnO2 and TiO2 film were deposited. The XRD analysis showed that a heat treatment at 400 °C after depositing the SnO2 and TiO2 films was effective in obtaining the rutile-TiO2 film when the SnO2 film was thicker than 10 nm. The TEM/EDX analysis show that no diffusion in the thin film between TiO2 and SnO2. The dielectric constant of the TiO2 film deposited on the SnO2 film (20 nm) was 67, which was more than twice as high as anatase TiO2 dielectric constant (Anatase TiO2 dielectric constant : 15–40). The current density was 10−4 A cm−2 at 0.7 V and this value confirmed that the leakage current was not affected by the SnO2 seed layer.
115702
Dan Zhu, Anran Li, Yunsong Di, Zhuyuan Wang, Jingzhan Shi, Xiaoqi Ni and Yiping Wang
The expression of membrane type-1 matrix metalloproteinase (MT1-MMP) in cancer cells is critical for understanding the development, invasion and metastasis of cancers. In this study, we devised an interference-free surface-enhanced Raman scattering (SERS) nanoprobe with high selectivity and specificity for MT1-MMP. The nanoprobe was comprised of silver core-silica shell nanoparticle with a Raman reporter tag (4-mercaptobenzonitrile) embedded in the interface. Moreover, the nitrile group in 4-mercaptobenzonitrile shows a unique characteristic peak in the Raman-silent region (1800–2800 cm−1), which eliminates spectral overlapping or background interference in the Raman fingerprint region (500–1800 cm−1). After surface modification with a targeting peptide, the nanoprobe allowed visualization and evaluation of MT1-MMP in breast cancer cells via SERS spectrometry. This interference-free, peptide-functionalized SERS nanoprobe is supposed to be conducive to early diagnosis and invasive assessment of cancer in clinical settings.
115703
Wenbing Cao, Yuhan Wu, Xin Li, Xuanfeng Jiang, Yuhong Zhang, Yuan Zhan and Zhengguang Sun
Silane-functionalized carbon dots (SiCDs) can be exploited as effective color converting materials for the solid-state light-emitting devices. However, most of SiCDs reported thus far have shown photoluminescence emissions in the blue and green spectral range, which limit them to construct an efficient white light-emitting diodes (WLEDs) due to the lack of long-wavelength emission. Herein, a series of double silane-functionalized carbon dots (DSiCDs) were prepared via a one-step solvothermal method. The results show that the organic functional group of the silane has great influence on the optical properties of DSiCDs and the number of alkoxy group in the silane has great influence on coating properties of DSiCDs. In addition, the DSiCDs prepared by (3-aminopropyl)triethoxysilane and N-[3-(trimethoxysilyl)propyl]ethylenediamine with molar ratio of 7:3 show excellent optical properties with the maximum emission at 608 nm under 570 nm excitation. Furthermore, they can be completely cured within 1 h at room temperature to form fluorescent coating with high stability and strong adhesion to the substrate. Together with their excellent optical and coating properties, they can be directly coated on LED chips to prepare WLEDs, with a CIE coordinate of (0.33,0.31), color rendering index of 81.6, and color temperature of 5774 K.
115704
Lili Jiang, Su Xu, Haitao Yu, Qi Cui and Rui Cao
Due to the impact of the new crown epidemic in recent years, disinfectants have played an increasingly important role, so the research and development of new high-efficiency nano-disinfectants are urgent issues. In this study, graphene oxide (GO) was first prepared by the modified Hummer method. Then, the GO/trichloroisocyanuric acid (TCCA) composite was prepared by loading TCCA into GO with the blending method. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy and atomic force microscopy were used to characterize the composite. The results showed that TCCA was successfully loaded on the surface of GO or intercalated among GO layers. Next, the antibacterial performance of the composite against Escherichia coli and Staphylococcus aureus was tested by the 96-well plate assay. A bactericidal kinetic curve, bacterial inhibition tests, and the mechanism of bacterial inhibition were discussed. The results showed that the minimum inhibitory concentration (MIC) of the GO/TCCA composite (GO:TCCA ratio = 1:50) was 327.5 μg ml−1 against E. coli and 655 μg ml−1 against S. aureus. At the MIC, the inhibition rate of the GO/TCCA composite exceeded 99.46% against E. coli and 99.17% against S. aureus. The bactericidal kinetic curves indicate that the GO/TCCA composite has an excellent bactericidal effect against E. coli and S. aureus.
Corrigendum
119501
The following article is Free article
Byunguk Kim, Taeseong Kang, Gucheol Lee and Hyeong tag Jeon