Letter
09LT01
Liliia N Dvoretckaia, Alexey M Mozharov, Yury Berdnikov and Ivan S Mukhin
We present an original approach to realistic modeling of light focusing by microsphere systems to form the photonic jets for nano-patterning of the substrates with high refractive index. In simulations we analyze the photonic jets produced by a single sphere and close-packed array of microspheres on the photoresist layer and Si substrate. We show how the lithographic profiles can be controlled by varying the exposure dose and system geometry in wide ranges of photoresist layer thicknesses and microsphere sizes. The modeling covers the entire lithographic system and accounts for the interference of focused light transmitted through the microlenses and reflected from the Si substrate. We use our approach to optimize the size of the lithographic pattern and confirm the simulation results experimentally. The suggested set of methods is rather universal and may be applied to other microlens and resist materials to minimize lithography lateral resolution.
Topical Reviews
093001
Qiuyang Yan, Yin Cheng, Ranran Wang and Jing Sun
3D porous MXenes have recently attracted great attention as they possess appealing electrical and mechanical properties, which enable their excellent performance in expanding application scopes like electromagnetic interference shielding, energy conversion and storage, and smart sensing. New methods have been developed for their synthesis and 3D porous structure design, as well as the tuning of properties for practical applications. Nevertheless, the fundamental understanding of their structure–property relationships remains obscure, hindering the further exploitation of their untapped potential in myriad applications. In this review, recent studies of porous MXenes are discussed regarding their synthesis, structure, properties, and applications. We also elaborate on the possible correlation between structure and properties through a comprehensive comparison of typical porous MXene examples. Finally, the challenges and perspectives for advancing the study and applications of porous MXenes are presented.
093002
Xin Luo, Yuanguo Zhou, Yijun Cai, Ziqiang Cheng, Zhimin Liu and Wenqiang Wan
Two-dimensional (2D) materials, due to their unique electronic, optical and structural properties, have attracted extensive attention of researchers in the world. However, most of 2D materials have low optical absorption efficiencies in the visible and near-infrared regimes, which leads to the weak light–matter interaction and limits their further applications in optoelectronic devices. Thus, enhancing the light–matter interaction of various 2D materials in the visible and near-infrared regimes, has been a key topic for many optoelectronic equipment and related applications. In this topical review, we summarized the recent developments of the 2D materials-based optical absorbers in the visible and near infrared regimes, focusing mainly on the methods and relevant physical mechanisms of several typical perfect absorbers, such as narrowband perfect absorbers, dual-band perfect absorbers, and broadband perfect absorbers. Finally, several prospective research directions from our perspectives are presented at the end.
Special Issue Articles
094001
Weidong Yang, Wenxuan Ding, Menglong Liu, Jun Yang and Mao Li
Electronic skin (e-skin) has attracted much attention in smart wearables, prosthetics, and robotics. Capacitive-type pressure sensors are generally regarded as a good option for designing tactile sensing devices owing to their superior sensitivity in low-pressure regions, fast response time, and convenient manufacturing. Introducing microstructures on the electrode surface is an effective approach to achieve highly sensitive capacitive pressure sensors. In this work, an electromechanical model is proposed to build the relationship between capacitance change and compressive force. The present model can predict the sensitivity of the capacitive pressure sensor with microstructured electrodes, where each cellular microstructure is modeled using contact mechanics theory. It is the first time in the literature that, based on the Hertz theory framework, a rigorous electromechanical theory framework is established to model a flexible capacitive pressure sensor. In addition, the model can be extended to other microstructures, such as micro-pyramid, micro-pillar, and micro-dome array. The validation indicates that the analytical results agree well with the experimental data from our previous work and other literature. Moreover, the present model can effectively capture the sensitivity of the pressure sensor in the beginning range of small pressure. Sensitivity in this range is the most significant for the e-skin due to its robust linearity for a pressure sensor. Besides, we analyzed the compressive force–displacement relationship, the compressive force–contact radius relationship, and the influences of the geometrical and material parameters on the electromechanical coupling effect. The results show that the height and the Young’s modulus of the soft dielectric layer are regarded as the dominant influencing factors in the sensitivity of capacitive pressure sensors.
094002
Joseph Schwan, Brandon Wagner, Minseok Kim and Lorenzo Mangolini
The use of silicon nanoparticles for lithium-ion batteries requires a precise control over both their average size and their size distribution. Particles larger than the generally accepted critical size of 150 nm fail during lithiation because of excessive swelling, while very small particles (<10 nm) inevitably lead to a poor first cycle coulombic efficiency because of their excessive specific surface area. Both mechanisms induce irreversible capacity losses and are detrimental to the anode functionality. In this manuscript we describe a novel approach for enhanced growth of nanoparticles to ∼20 nm using low-temperature flow-through plasma reactors via pulsing. Pulsing of the RF power leads to a significant increase in the average particle size, all while maintaining the particles well below the critical size for stable operation in a lithium-ion battery anode. A zero-dimensional aerosol plasma model is developed to provide insights into the dynamics of particle agglomeration and growth in the pulsed plasma reactor. The accelerated growth correlates with the shape of the particle size distribution in the afterglow, which is in turn controlled by parameters such as metastable density, gas and electron temperature. The accelerated agglomeration in each afterglow phase is followed by rapid sintering of the agglomerates into single-crystal particles in the following plasma-on phase. This study highlights the potential of non-thermal plasma reactors for the synthesis of functional nanomaterials, while also underscoring the need for better characterization of their fundamental parameters in transient regimes.
094003
Muhammad Hamidullah, Céline Élie-Caille and Thérèse Leblois
Higher-order Lamb waves with quasi-zero surface displacement components are reported on (100)-cut GaAs propagating along the <110> direction where the total displacement at the surface of the plate is less than 10% of the maximum total displacement. The dispersion curves and the displacement component profiles show the reduction of total displacement at the surface of the plate starting when the phase velocities of the higher-order modes are crossing the shear bulk acoustic wave velocity to the value as low as 5%. Due to the concentration of acoustic energy inside the plate, the reported quasi-zero plate acoustic waves (QZ-PAW) further reduce the radiation of acoustic energy when the plate surface is in contact with liquid. The experimental results validate the occurrence of QZ-PAW with a reduction of viscous damping insertion loss compared to previously reported quasi-longitudinal Lamb waves. The results demonstrate the potential QZ-PAW mode for emerging applications such as dual-mode PAW sensors, PAW devices with integrated sensor and actuator, thin-film and ultra-high frequency PAW sensors in highly viscous liquid media.
Papers
Applied magnetism
095001
Shiwei Chen, Rahul Mishra, Huanjian Chen, Hyunsoo Yang and Xuepeng Qiu
We fabricated a wedge-shaped Pt/Co/Pt device with perpendicular magnetic anisotropy and manifested that the Co magnetization can be solely switched by spin–orbit torque without any magnetic field. Similar to the synaptic weight, we observed that the state of Co magnetization (presented by the anomalous Hall resistance RH) of the wedged Pt/Co/Pt device can be tuned continuously with a large number of nonvolatile levels by applied pulse currents. Furthermore, we studied the synaptic plasticity of the wedged Pt/Co/Pt device, including the excitatory postsynaptic potentials or inhibitory postsynaptic potentials and spiking-time-dependent plasticity. The work elucidates the promise of the wedged Pt/Co/Pt device as a candidate for a new type of artificial synaptic device that is induced by a spin current and paves a substantial pathway toward the combination of spintronics and synaptic devices.
095002
Lavanya Rathi P, Bharathi Ponraj and Deepa S
Absorption-dominant microwave shields are in high demand for mitigating the effect of electromagnetic interference (EMI) on devices and the environment. In this paper, we describe the development of absorption enhanced ternary nanocomposites and their EMI shielding capability. Polymer based shields have been fabricated by dispersing conducting graphite and magnetic spinel ferrite Sn0.2Fe2.8O4 nanoparticles in electroactive polymer polyvinylidene fluoride. Shielding effectiveness (SE) values in the expected range of 10–30 dB in the X-band region, were achieved with as low as 30–50 wt% of pristine graphite and 1–10 wt% of Sn0.2Fe2.8O4. The industrial standard of 99% shielding (SE ⩾ 20 dB) was obtained with 50 wt% of graphite. The composites exhibit absorption as the dominant mechanism of shielding. The percentage SE due to absorption is about 70% and is tuned upwards by the increase in ferrite concentration. The composites were characterized by x-ray diffraction and vibrating sample magnetometry; thermal analysis confirms their stability. The thin, flexible films fabricated by the simple and cost-efficient technique of solution casting will be extremely valuable as wrap-on shields for X-band microwave attenuation.
095003
Shuguang Fang, Lianwen Deng, Pin Zhang, Leilei Qiu, Haipeng Xie, Junsa Du, Haiyue Wang and Haonan Zhao
In this paper, two kinds of dual-band metamaterial absorbers (MMAs) with stable absorption performance based on fractal structures are proposed. As the key feature, with the increase in fractal order, the fractal MMAs can reduce the weight while keeping the absorption performance. The multi-band absorption property is analyzed by multiple L-C resonances generated by the fractal structure. By virtue of good impedance matching characteristics and the synergy of the circuit and electromagnetic resonance, effective and stable microwave absorption is readily achieved. Finally, two prototypes are fabricated for demonstration, and the measurement result is consistent well with the simulation one. As expected, the proposed fractal MMAs have the advantage of low-cost, light-weight, and dual-effective absorption bands, and have great potential in the application of multi-band radar stealth.
Semiconductors and photonics
095101
Yang Cheng, Yongfeng Li, He Wang, Jiafu Wang, Zhe Qin and Shaobo Qu
Chirality, a geometric property that is of great importance in chemistry, biology, and medicine, has spurred many breakthroughs in the field of multi-dimensional metasurfaces that provide efficient ways of flexibly manipulating amplitude and phase of circular polarization (CP) waves. As one of the most important applications, chiral metamaterials can be used to implement novel absorbers. Herein, an ultra-thin wideband circular dichroic asymmetric metasurface was implemented via loading resistive film into chiral resonators. Opposite and reversible polarization conversion and circular dichroism (CD) were realized as being illuminated by CP waves from both sides meanwhile. Theoretical derivation and simulation verify that the polarization conversion and CD enhancement utilizing multi-layer CD metasurface. It is also found that the orientation angle of the meta-atom of each layer plays an important role in the CD enhancement, which paves a new way for CD enhancement. In addition, the coupling between the CD resonators was utilized to manipulate CD. On this basis, an ultra-thin polarization-insensitive absorber was achieved by employing a C4 2 × 2 CD resonator array, which was identical illuminating from front and back sides. Circular dichroic absorbers possess great potential in practical applications, ranging from stealth technology, antenna isolation, multi-functional microwave devices, chiral sensing, and catalysis.
095102
Yogendra Kumar Prajapati, J B Maurya and Anuj K Sharma
In this work, we propose a graphene-assisted plasmonic structure with photonic spin Hall effect (PSHE) for sensing applications in near infrared with an emphasis on tunable and spin control aspects leading to enhanced performance. We comprehensively investigate PSHE in view of variable chemical doping of graphene monolayer in the structure and manipulation of the spin dependent splitting by considering single and cross polarization states. There is observed a considerable variation in spin shift due to increase in chemical potential or Pauli blocking, which fundamentally controls the light absorption by graphene. Our simulation results reveal that the amplified spin dependent shift (SDS) is 1.13 × 104 times higher than the conventional SDS at 0.436 eV of graphene chemical potential. Further, this structure is utilised for sensing application, and it is observed that graphene-assisted plasmonic based structure possesses significantly greater spin dependent sensitivity (5.53 times), figure of merit (8.56 × 105 times), and extremely finer limit of detection (by a factor of 18.10) are achieved compared to the structure without graphene. The results indicate that choosing the proposed graphene-assisted plasmonic structure with variable chemical potential and light polarization components, an extremely enhanced sensing performance can be achieved. The results are consistent with the physical rationale and are particularly important for potential biosensing applications.
095103
Ming Xing Li, Yue Ke Wang, Meng Jia Lu and Tian Sang
In this letter, a method to realize topological rainbow trapping is presented, which is composed of gradual trivial-nontrivial-trivial heterostructures based on two-dimensional photonic crystals with C-4 symmetry. In the proposed sandwiched structure, the two coupled topological edge states with different frequencies are separated and trapped in different positions, due to group velocity of near to zero. We have achieved the dual-mode of topological rainbow in one structure, and the dual-mode of topological rainbow under one mode excitation is also realized by using a simple bend design. The immunity to defects is also investigated and it is found our slowing light system has strong robustness. Finite element method simulation results verify our idea, and our work opens up a new approach for frequency routing of topological photonic states.
095104
Zhou Lyu, Binzhen Zhang, Junping Duan, Yuhua Yang, Rui Liu, Yiqing Wei and Jingwen Liu
In this work, we design, analyze and process an ultra-broadband absorption optical transparent metamaterials absorbing device. The simulation results show that within the 13.68–71.6 GHz frequency range, the devicereaches more than 90% absorptivity, and that transverse magnetic waves and transverse waves under a large angle of polarization and incident angle can obtain high absorption performance. Therefore the device has the perfect performance of polarization insensitivity and wide angle of incidence. The absorbing mechanism is analyzed by using the equivalent medium theory, and the theoretical results are in good agreement with the simulation results. Because of its advantages of wideband absorption, high transparency, lightweight, and easy availability, the deive has important application value in practical civil and military fields, such as electromagnetic interference, electromagnetic compatibility, super lens, invisibility cloak, solar cell device design and so on.
095105
Irina V Zhevstovskikh, Nikita S Averkiev, Maksim N Sarychev, Olga I Semenova and Oleg E Tereshchenko
We present a temperature and laser-power dependent photoluminescence (PL) study of methylammonium lead iodide (CH3NH3PbI3) single crystals in the orthorhombic phase. At temperatures below 140 K, we revealed the multi-component PL emission. In addition to a free exciton with an energy of 1.65 eV, we found emission bands with peaks approximately equal to 1.6 eV, 1.52 eV, and 1.48 eV. Analysis of the thermal evolution of the intensities, peak positions, and linewidths of all the PL bands allowed one to determine their origin. We attributed the PL peak with energy of 1.6 eV to a bound exciton, while the free exciton-bound exciton splitting energy is 50–60 meV. The PL emission with an energy of 1.52 eV can be explained by the donor-acceptor pair (DAP) recombination, where donor and acceptor defects have a depth of about 12 meV and 120 meV, respectively. MA (CH3NH3) interstitials (MA
) and lead vacancies (V
) are the most suitable for the DAP transition to occur in CH3NH3PbI3 crystals. The 1.48 eV PL emission is consistent with the recombination of self-trapped excitons, and interstitial iodine is likely to be an active trap source. We found the variation of the self-trapped depth from 15 meV (at
80 K) to 53 meV (at
80 K) with increasing the temperature. Although the multi-component PL emission in CH3NH3PbI3 single crystals appears at low temperatures, defects and excitonic traps that cause this emission can affect the photophysics of hybrid perovskites at higher temperatures.
095106
Jun-Seok Ma, Jin-Young Choi, Seung-Won Oh and Wook-Sung Kim
A liquid-crystal (LC)-based floating electrode-free (FE-free) coplanar waveguide (CPW) phase shifter with an additional LC layer is demonstrated for the first time. An LC layer is overlain on the electrodes of the original model; this change increases the amount of electric flux that the proposed structure can confine in the tunable region, and thereby greatly increases the figure-of-merit (FoM) while maintaining the benefits of the simple coplanar structure. We simulated the variations in the phase shifter’s FoM, characteristic impedance, and driving voltage while sweeping the additional LC layer thickness up to 300 μm with each electrode condition at 28 GHz. In the case of electrode thickness variation, the FoM increased as electrode thickness increased, regardless of the presence of the additional LC layer. However, in the case of the signal electrode width variation, we obtained an opposite FoM tendency depending on the presence of the additional LC layer. This work shows the possibility of an efficient LC-based FE-free CPW phase shifter design for a given LC layer and electrode conditions.
095107
V Rakesh Kumar, Kamalesh Jana, Indranuj Dey, K Chandra Vardhan, Amit D Lad, Jeffrey M Brown, Mette B Gaarde, Arnaud Couairon and G Ravindra Kumar
High power, broadband terahertz (THz) radiation from liquids, excited by intense, femtosecond 800 nm laser pulses has been demonstrated recently, overturning the long held belief that liquids would not give such emission due to their absorption in the THz region. Given the widespread interest in the use of THz radiation for several applications and the energy and bandwidth limitations of existing sources, liquids are expected to attract great attention in the future. While the emission at tens of microjoules from liquids is very promising, it is important to explore whether control of the THz flux and spectrum is achievable by manipulating the laser or liquid parameters. In this paper we present results on manipulating the spectrum of THz radiation from liquids by chirping the input laser pulse and optimizing the THz output energy by laser chirp as well as optimizing the focal position. We demonstrate tunability by varying the chirp of the laser pulse and show that the THz emission predominantly comes from the region near the end of the liquid path, consistent with the absorption of THz radiation by liquids. This control gives us an opportunity to tune the THz radiation to suit experimental needs. We present simulations that support the results.
095108
Fatemeh Bazouband, Elaheh Bazouband, Tahereh Golestanizade, Amirhossein Jabbar Sadooni, Maryam Mousavifard, Affar S Karimullah, Andra Naresh Kumar Reddy and Mahdieh Hashemi
The functionality of most of the metasurfaces that have been investigated so far, especially in illuminations with arbitrarily linearly polarized incident light, are restricted to x- or y-polarized incoming light. In particular, filtering out one of the two orthogonal polarizations of the incoming electromagnetic wave loses the incident light energy and limits the potential performance of the metasurface. In this study, by utilizing the cross-shaped silicon metaatoms that support the simultaneous excitation of electric and magnetic dipoles under the illumination of both x- and y- orthogonal polarizations, we overcome the polarization-restricted functionality of the metalenses. By selecting the metaatoms arrangement in the metalens structure, which follows the hyperbolic phase profiles for both x- and y-polarized incoming light waves at the same time, we obtain the light intensity distribution with the extended depth of focus (EDOF) or enhanced intensities at the focal spot with the focusing efficiency 65% for the numerical aperture of 0.7. Utilizing metaatoms with the ability to control the two orthogonal incoming polarizations develops a new methodology for using the full potential and intensity of the arbitrary polarized incoming light. The present design concept of metaatoms has several advantages that are not limited to metalenses alone but can be applied in all metasurfaces realized to have good efficiency. Finally, the proposed metalenses are suitable for imaging, optical tweezers and lithography applications, where subwavelength light intensity distributions with EDOF are the most desirable property.
095109
Jiaxin Kuang, Haiwen Liu, Linping Feng and Hongliang Tian
In this paper, a compact balanced diplexer using a novel hairpin split ring resonator (H-SRR) is presented and demonstrated. First, the working principle of the proposed H-SRR is described, which shows a negative permittivity or a negative permeability in the stopband. It can be used to construct compact passive components and improve the stopband rejection performance. Then, the differential-mode (DM) excitation and common-mode (CM) excitation are investigated, respectively. Under DM operation, the H-SRR can provide one DM resonant mode. Under CM operation, the H-SRR can excite two CM resonant modes far from the DM resonant mode, thus producing a desired CM rejection performance. Moreover, by introducing a mixed electromagnetic coupling, transmission zeros are produced, significantly improving the DM isolation between the two channels. Finally, a balanced diplexer is designed and fabricated. The lower and higher channels of the diplexer are centered at 3.36 and 4.00 GHz. The DM channel isolation is better than 40/41 dB in the two passbands when the frequency ratio is less than 1.2, which is in satisfactory agreement with the simulated results.
095110
R Lingaparthi, N Dharmarasu, K Radhakrishnan and Y Zheng
The effects of Si doping well beyond the Mott transition limit on the structural, electrical, and optical properties of plasma assisted molecular beam epitaxy grown GaN layers were studied. Si doping up to a doping density of <1.0 × 1020 cm−3 resulted in smooth surface morphologies and almost strain free 500 nm thick GaN layers on 50 mm Si (111) substrate. In this doping range, the crystal quality improved with increased Si doping. However, GaN layers with doping density of >1.0 × 1020 cm−3 resulted in rough surface morphology and degraded crystal quality. It also showed higher tensile strain, but did not result in cracking. Irrespective of the surface morphology and structural quality, the sheet resistance systematically decreased with increased carrier concentration up to and beyond the doping density of 1.0 × 1020 cm−3. PL study revealed three distinctive characteristics with Si doping: first, yellow luminescence is absent in Si doped samples— an indication of occupied VGa-ON and CN states in the bandgap; second, a distinctive luminescence peak is observed next to the band edge luminescence (BEL) for the samples doped beyond 2.1 × 1019 cm−3—probably an indication of localization of some of the electrons either at donors or at excitons bound to defects; third, blue shift of the BEL is not matching with the calculated Moss–Burstein shift for doping densities beyond 2.1 × 1019 cm−3—an indication of some of the electrons not occupying higher levels of conduction band, which is consistent with the second observation of localization of electrons near the donors or excitons bound to surface defects.
095111
Fengxia Xue, Haihua Fan, Qiaofeng Dai, Haiying Liu and Sheng Lan
In recent years, directional scattering has been one of the most active research hotspots in the field of nanophotonics. Herein, we study the directional scattering properties of a silicon hollow nanodisk (SHND) illuminated by a tightly focused radially polarized beam. The induced strong longitudinal total electric dipole interferes with transverse magnetic dipole to achieve a highly-efficient transverse unidirectional scattering when the SHND is located at a specific position in the focal plane. Moreover, the manipulated unidirectional scattering in the transverse direction can be realized in the broad wavelength range from 581 nm to 656 nm. In addition, the unidirectional angular radiation towards all directions can be realized by adjusting the position of the SHND. Our research results are helpful for the design of nanophotonic devices that can manipulate the angular radiation direction, and have potential applications in sensing, optical communications, solar cells and other fields.
095112
Jiabo Chen, Zhihong Liu, Haiyong Wang, Xiaoxiao Zhu, Dan Zhu, Tao Zhang, Xiaoling Duan, Jing Ning, Jincheng Zhang and Yue Hao
In this paper, a simple method based on subthreshold slopes was proposed to investigate the interface trap characteristics in a p-channel GaN MOSFET with a p-GaN/AlGaN/GaN structure on Si. The energy distribution of the interface trap density has been extracted from the analysis of the transfer characteristics in the subthreshold region of operation. The interface trap densities and respective energy distribution at both room temperature and 150 °C were also calculated from the ac conductance measurements at corresponding applied biases. Both characterization methods show similar results of trap densities and energy levels.
095113
Yunliang Rao, Yuan Chen, Zhiyuan He, Yiqiang Chen, Chang Liu, Xinbing Xu, Yang Liu and Guoguang Lu
In this work, investigation on the degradation behavior of 1.2 kV/52 A silicon carbide (SiC) power MOSFETs subjected to repetitive slow power cycling stress has been performed. Electric characteristics have been characterized periodically over the stress and the respective degradation mechanisms have also been analyzed. A comprehensive degradation analysis is further conducted after the aging test by virtue of the x-ray inspection system, scanning acoustic microscope, scanning electron microscope, emission microscope, etc. Experimental results reveal that both the degradation of the gate oxide on the chip-level and the degradation of the bond wire and solder layer on the package-level have emerged over the cyclic stress. Specifically, growths of threshold voltage (Vth) and gate leakage current (Igss) are thought to be relevant with the degradation of gate oxide by SiC/SiO2 interface states trapping/de-trapping electrons on the chip-level, while the appearance of fatigue in the bond wire and the delamination of the solder layer imply the degradation on the package-level. This work may provide some practical guidelines for assessments of the reliability of SiC power MOSFETs in power conversion systems.
Low-temperature plasmas
095201
I B Denysenko, M Mikikian and N A Azarenkov
The charge and dynamics of dust particles in an afterglow plasma are studied using a 1D model in the diffusion approximation, taking into account the transition from ambipolar to free diffusion. It is analyzed how external conditions (dust particle size, neutral gas pressure and initial electron density) affect the dust motion. The dust particle dynamics has been examined in microgravity conditions and in presence of gravity. Without gravity, the location of dust particles in plasma volume may change essentially during the afterglow if the dust size and pressure are small (⩽10 nm and ⩽30 mTorr, respectively). At small pressures, in the very beginning of afterglow, small nanoparticles move to the plasma boundary because the ion drag force dominates over the electric force. At afterglow times when the electron temperature becomes time-independent, the ion drag force decreases faster with time than the electric force due to the ion density decrease, and dust particles may move to the slab center. In presence of gravity, the effect of gravity force on dust particles is important only at large afterglow times (t ⩾ 10 ms), when the electric and ion drag forces are small. The dust dynamics depends essentially on the initial plasma density. If the density is large (∼1012 cm−3), small nanoparticles (⩽10 nm) may deposit on plasma walls in the beginning of plasma afterglow because of an enhancement of the ion drag force.
095202
M Y Pustylnik, Z Marvi and J Beckers
We investigated the possibility of using a layer of quantum dots (QDs) deposited on the microparticle surface for the measurement of the charge the microparticle acquires when immersed into a plasma. To that end, we performed the calculations of the Stark shift of the photoluminescence spectrum of QDs caused by the fluctuating local electric field. In our calculations, we assumed the plasma-delivered surplus electrons to be distributed on the surface of a microparticle. According to our calculations, the Stark shift will acquire measurable values when the lifetime of the quasi-stationary configuration of the surplus electrons will be determined by their diffusion along the surface. Experiments with flat QD-covered floating plasma-facing surfaces suggest that measurable Stark shift of the photoluminescence spectrum can be achieved. Based on our model, modern microscopic plasma-surface interaction theories and analysis of the experiments, we suggest the possible design of the charge microsensor, which will allow to measure the charge accumulated on its surface by means of visible-light optics.
095203
Mian Xiao, Lipeng Liu, Hengxin He, Bin Luo, Junru Che and Junjia He
The theory of positive glow corona is revisited by performing a detailed simulation based on the fluid model with a comprehensive kinetic scheme (CKS). The kinetic scheme includes 28 species, 127 chemical reactions for N2/O2 mixture. The simulation results are compared with that from an averaged kinetic scheme (AKS) which considers only five species and seven reactions. The two models give similar predictions in terms of discharge current. However, several differences in details of the results bring new physical insights to the theory of positive glow corona. It is shown that, the model with the AKS underestimates the detachment effect that plays an important role in positive glow corona discharge. Moreover, the wave-front of the current pulse calculated by the model with the CKS has a smaller steepness, a lower peak-to-peak value, and a longer rise time. These results are in better agreement with the experimental measurement reported in the literature. It is also found that the positive space charge of glow corona is dominated by O2+ in the ionization layer and by O4+ in the drift region far away from the anode. Negative ions are produced in the ionization layer close to the anode and the main species are O− and O3−.
095204
G Hübner, L Bischoff, I Korolov, Z Donkó, M Leimkühler, Y Liu, M Böke, V Schulz-von der Gathen, T Mussenbrock and J Schulze
Capacitively coupled micro atmospheric pressure plasma jets are important tools for the generation of radicals at room temperature for various applications. Voltage waveform tailoring (VWT), which is based on the simultaneous use of a set of excitation frequencies, has been demonstrated to provide an efficient control of the electron energy probability function (EEPF) in such plasmas and, thus, allows optimizing the electron impact driven excitation and dissociation processes as compared to the classical single-frequency operation mode. In this work, the effects of changing the driving frequencies on the spatio-temporally resolved electron power absorption dynamics, the generation of helium metastables and the dissociation of nitrogen molecules are investigated in He/N2 plasmas based on experiments and simulations. We find that under a single-frequency excitation, the plasma and helium metastable densities are enhanced as a function of the driving frequency at a fixed voltage. When using valleys-type driving voltage waveforms synthesized based on consecutive harmonics of the fundamental driving frequency, the spatial symmetry of the electron power absorption dynamics and of the metastable density profile is broken. Increasing the fundamental frequency at a constant voltage is found to drastically enhance the plasma and metastable densities, which is a consequence of the change of the EEPF. Finally, we compare the energy efficiency of the formation of radicals under single-frequency and VWT operation at different driving frequencies. For a given power dissipated in the plasma, VWT yields a higher helium metastable as well as electron density and a higher dissociation rate of N2.
Condensed matter
095301
Ya Liu, Weixuan Zhang and Xiangdong Zhang
Knots have always played an important role in the life sciences because of their complex topology. Some previous investigations have shown that an optical field can be modulated into knot structures, and a knotted trap formed by light beams has also been demonstrated. Very recently, it has also been demonstrated that an acoustic vortex field with phase singularities can be tied into a knotted structure. However, for knotted tweezers, we need to use the relative maximum points of the amplitude distribution to construct the knotted field (although it is still not known how to create such a knotted line acoustic field) which is beneficial for particle trapping into knotted shapes. In this work we propose a method to generate acoustic fields with knotted intensity maxima in three dimensions. Based on the finite element method and angular spectrum theory, we prove that both Hopf link and trefoil knot lines in acoustic fields can be generated by the designed holograms. Furthermore, under particle tracking simulation in the time domain, we demonstrate that the knotted line acoustic fields can be used to capture particles into different topologies in three dimensions.
095302
Taisei Ariki, Tatsuya Nomura, Kohei Ohnishi and Takashi Kimura
A lateral spin valve consisting of highly spin-polarized CoFeAl electrodes with a CoFeAl/Cu bilayer spin channel has been developed. Despite a large spin absorption into the CoFeAl capping channel layer, an efficient spin injection and detection using the CoFeAl electrodes enable us to observe a clear spin valve signal. We demonstrate that the nonlocal spin accumulation signal is significantly modulated depending on the relative angle of the magnetizations between the spin injector and absorber. The observed modulation phenomena is explained by the longitudinal and transverse spin absorption effects into the CoFeAl channel layer with the spin resistance model.
095303
Khushboo Singh, Aparajita Bandyopadhyay and Amartya Sengupta
Polymer composites have been an integral part of our lives for centuries and their applicability has increased substantially with recent technological advancements. However, with the vast range of available fillers and polymer materials, it is crucial to have a priori knowledge of the physical and chemical properties of the materials for various applications. Hence, material characterization at different stages of production is one of the most important parts of product development and quality control. In this article, we have probed the optical behavior of a few polymer composites, with absorptive and dispersive guests, using THz time-domain spectroscopy. Subsequently, we used quasi-static effective medium theory to investigate the impact of absorptive and dispersive filler materials on the optical properties of the composites. This enables us to address the significance of filler properties on the detection limits of real-life composite compounds.
095304
Miriam Galbiati, Manuela Scarselli, Fabrizio Arciprete, Maurizio De Crescenzi and Luca Camilli
The deposition of calcium fluoride (CaF2) on Si(111) at temperatures above 570 °C has been studied with scanning tunneling microscopy. At such temperatures, triangular calcium fluoride islands are formed both on terraces and along the phase domain boundaries of the (7 × 7) reconstruction of the Si(111) substrate. In addition to the formation of islands, we observe that CaF2 molecules react with the substrate inducing large areas of its surface to reconstruct into (√3 × √3) and c(2 × 4) phases. Upon annealing at 600 °C, the abovementioned areas of (√3 × √3) and c(2 × 4) turn into the stable (3 × 1) phase upon desorption of fluorine. Calcium fluoride islands are stable at this temperature. Depositions of calcium fluoride performed with Si substrate kept at higher temperature, namely at 680 °C, lead directly to the formation of (3 × 1) phase due to the complete desorption of fluorine, without passing through the formation of the metastable (√3 × √3) and c(2 × 4) phases. If CaF2/Si(111) is brought at even higher temperatures, Ca also starts desorbing and the (7 × 7)-Si(111) reconstruction can eventually be restored.
095305
M Bergin, T A Myles, A Radić, C J Hatchwell, S M Lambrick, D J Ward, S D Eder, A Fahy, M Barr and P C Dastoor
Developing the next generation of scanning helium microscopes requires the fabrication of optical elements with complex internal geometries. We show that resin stereolithography (SLA) 3D printing produces low-cost components with the requisite convoluted structures whilst achieving the required vacuum properties, even without in situ baking. As a case study, a redesigned pinhole plate optical element of an existing scanning helium microscope was fabricated using SLA 3D printing. In comparison to the original machined component, the new optical element minimised the key sources of background signal, in particular multiple scattering and the secondary effusive beam.
Applied biophysics
095401
Huichao Wang, Tong Zhao, Shuhui Yang, Liang Zou, Xiaolong Wang and Yuantao Zhang
Under the pressures of the current global pandemic, researchers have been working hard to find a reliable way to suppress infection by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and prevent the spread of COVID-19. Studies have shown that the recognition and binding of human angiotensin-converting enzyme 2 by the receptor-binding domain (RBD) of the spike protein on the surface of SARS-CoV-2 is a crucial step in viral invasion of human receptor cells, and blocking this process could inhibit the virus from invading normal human cells. Plasma treatment can disrupt the structure of the RBD and effectively block the binding process. However, the mechanism by which plasma blocks recognition and binding is not clear. In this study, the reaction between reactive oxygen species (ROS) in plasma and a molecular model of the RBD was simulated using a reactive molecular dynamics method. The results showed that the destruction of the RBD by ROS was triggered by hydrogen abstraction reactions: O and OH abstracted H atoms from the RBD, while the H atoms of H2O2 and HO2 were abstracted by the RBD. This hydrogen abstraction resulted in the breakage of C–H, N–H, O–H and C=O bonds and the formation of C=C and C=N bonds. The addition reaction of OH increased the number of O–H bonds and caused the formation of C–O, N–O and O–H bonds. The dissociation of N–H bonds led to the destruction of the original peptide bond structure and amino acid residues, changed the type of amino acid residues and caused the conversion of N–C and N=C and C=O and C–O. The simulation partially elucidated the microscopic mechanism of the interaction between ROS in plasma and the capsid protein of SARS-CoV-2, providing theoretical support for the control of SARS-CoV-2 infection by plasma, a contribution to overcoming the global pandemic.