Nitric oxide (NO) post-oxidation annealing (POA) is an effective method for lowering the carbon component at an oxide/4H-SiC interface. However, this method has a drawback of additional oxidation by oxygen source from the NO gas. Atomic-layer-deposited (ALD) oxides subjected to ammonia (NH3) annealing were employed to realize nitridation without oxidation process. Because NH3-annealed oxides have a drawback of high leakage current, deposition of dielectrics on ALD SiO2 with subsequent NH3 annealing were performed to reduce leakage current and to prevent oxidation, respectively. The employments of this process reduced interface trap density and surface roughness effectively while maintaining low leakage current.