Abstract
Determinations were made of the rate of corrosion of electrolytic iron, cast iron, and sheet iron in concentrated alkali solutions (NaOH and KOH), fused alkalies, and in alkali lyes during the process of fusion. It was found that the rate of corrosion depends upon the temperature, the concentration of alkali, and the concentration of chlorine ions and chlorate ions in the solution. The effect of cathode polarization on the rate of corrosion of sheet iron and cast iron in alkali solutions of different concentrations at various temperatures and various chlorine and chlorate ion concentrations was studied. It is shown that for the electrolytes examined, cathode polarization ensures protection of the iron against corrosion, and that the ratio between cathode current density without applied cathodic polarization and current density with applied cathodic polarization (completely protected cathode) varies between the limits 0.20 to 0.37. During the process of fusion of the alkali in an iron container, and also after fusion, cathodic polarization gives only a partial protection against corrosion.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
