A bipolar resistive switching memory device with a low power operation Equation or symbol description not available(200μA×1.3V) in a Equation or symbol description not availableW/Ge0.4Se0.6/Cu/Al structure is investigated. A high quality Equation or symbol description not availableGe0.4Se0.6 solid electrolyte is confirmed by X-ray photoelectron spectroscopy. The resistive memory device with a small via size of Equation or symbol description not available0.2μm has a large threshold voltage of Equation or symbol description not available0.4V, high resistance ratio Equation or symbol description not available(Rhigh/Rlow) of Equation or symbol description not available102, and good uniformity. The switching mechanisms are due to the Cu metallic filament formation and dissolution from the Equation or symbol description not availableGe0.4Se0.6 solid electrolyte under positive and negative biases, respectively, which have been confirmed by high resolution transmission electron microscopy image and energy-dispersive X-ray spectroscopy analysis. The strong Cu filament formation can also be investigated by monitoring the erase voltage and erase current. Good endurance of Equation or symbol description not available105cycles is obtained. Excellent data retention characteristics at Equation or symbol description not available85°C are observed after 24 h of retention time, owing to the strong Cu metallic filament formation in the Equation or symbol description not availableGe0.4Se0.6 solid electrolyte.