Abstract
A composite film composed of crystalline
and
was successfully deposited on magnesium alloy AZ31 from a liquid phase through a single-step process. The film had a thickness of ca. 370 nm and was composed of aggregations of nanoparticles whose diameters were in the range of 50–100 nm. During the corrosion tests, the coated AZ31 substrate showed a higher corrosive resistance than the uncoated AZ31. Potentiodynamic polarization curve measurements revealed that a clear passive region approaching ca. 280 mV could be observed on the curve of the coated AZ31 substrate. The formation and corrosion mechanism of the coated AZ31 substrate has also been discussed.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
