Highly efficient electrochemical generation of ozone on doped tin dioxide anodes was reported recently. Here, we report the scale up of such ozone generation on a membrane electrode assembly (MEA) made with Equation or symbol description not available8×13cm–doped tin dioxide anode. The effects of water flow rate, operating voltage, and current on dissolved ozone concentration, ozone production, current efficiency, and energy efficiency are reported. Ozone production and current efficiency increased with water flow. Operating with a single MEA, Equation or symbol description not available218mg∕h of dissolved ozone was produced at an applied current of Equation or symbol description not available6A (current Equation or symbol description not availabledensity=57.6mA∕cm2). With four MEAs operated in a stack, the dissolved ozone production increased to Equation or symbol description not available1.1g∕h at a total current of Equation or symbol description not available20.6A (current Equation or symbol description not availabledensity=49.5mA∕cm2) and individual cell voltage of Equation or symbol description not available3.3V. For the multiple MEA operation, the highest current efficiency was 21.7% based alone on dissolved ozone generation. The lowest energy consumption achieved was Equation or symbol description not available42kWh∕kg Equation or symbol description not available(O3) at Equation or symbol description not available643mg ozone per hour at current of Equation or symbol description not available10.1A (current Equation or symbol description not availabledensity=24.3mA∕cm2) and water flow of Equation or symbol description not available5.4L∕min (linear Equation or symbol description not availablevelocity=7.03cm∕s).