An investigation of electrophoretic deposition of an Alabama kaolin has been made, using several times the voltage commonly used in Europe for commercial dewatering of washed clay slips, in order to supply data on behavior at higher bath potentials than are available in the literature. Moisture content of the deposit decreases with amount of energy passed through the bath, hence with time of deposition and with voltage and current density applied. The yield of clay is about the same per ampere‐hour or per faraday of electricity passed, irrespective of voltage used on the bath. Hence, yield per kilowatt‐hour decreases with rise in voltage. The apparent electrochemical equivalent of this clay was about 10,000 grams per faraday, equivalent to 38 to 40 gram‐formula weights per faraday. Anomalous bath resistances were noted, bath resistance tending to decrease with advance in the electrophoresis instead of increasing with depletion of suspension and increased dryness of the anodic deposit of clay.