The compound Equation or symbol description not availableCu2Sb is known as a promising anode material for the lithium-ion battery due to its good cycle performance and large volumetric capacity. Our previous study revealed the existence of a Equation or symbol description not availableLixCuSb-type solid-solution phase with a Heusler-type structure formed during the Li uptake into the Equation or symbol description not availableCu2Sb phase, and we suggested that this Heusler phase would play an important role in promoting low irreversibility and a long cycling life. Therefore, this paper details a computational study of phase stability in Equation or symbol description not availableLixCuSb Equation or symbol description not available(0=x=2) from the viewpoint of the Li/vacancy arrangement. The first-principles approach was carried out using the cluster expansion technique which combines density functional and Monte Carlo computations. The calculations confirmed the formation of a solid solution of Equation or symbol description not availableLixCuSb at 300 K over the entire composition regime for Equation or symbol description not availablex ranging from 0 to 2. In addition, there was a strong tendency for Li ordering at Equation or symbol description not availablex=1 where all the octahedral sites were occupied by Li ions. Combining these results with those of the previous calculations for Li–Cu–Sb ternary compounds, we can summarize the lithium insertion reaction into Equation or symbol description not availableCu2Sb compounds as constituting the following three steps: (i) Li uptake into Equation or symbol description not availableCu2Sb results in the formation of LiCuSb and Cu metal as a three-phase coexistence reaction, (ii) solid solution formation of Equation or symbol description not availableLixCuSb takes place for Equation or symbol description not availablex ranging from 1 to Equation or symbol description not available∼1.6, and then (iii) Equation or symbol description not availableLi3Sb formation accompanying Cu extrusion occurs as a three-phase coexistence reaction.