Abstract
In order to control the polishing qualities of tungsten (W) and titanium nitride
films in W chemical-mechanical-polishing (WCMP) processes, the electrochemical behavior between the W and the
films deposited at various
flow rates was examined in this study. Metrologies, including X-ray diffractrometry, Auger electron spectrometry, and scanning electron microscopy, were used to verify the physical properties of the
films, while electrochemical analyses, including electrochemical impedance spectroscopy, potential dynamic curves, and potential difference measurements, were used to characterize the mechanism of galvanic corrosion between the W and the
films deposited at various
flow rates. The results show that the N content of the
films influences not only the physical properties of the
films but also the chemical activity in the WCMP slurries. The equivalent circuit, including the charge-transfer resistance and the titanium-oxide resistance associated with tantalum-oxide capacitance, was built to characterize the mechanism of the galvanic corrosion between the W and the
metals.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
