Abstract
Two different solder alloys,
and
, were used to joint p- and n-type bismuth telluride-based thermoelements with copper.
and
were identified to be the major interfacial compounds for the
and
soldered junctions, respectively. The contact resistivity measured is around
, which depends on both the thickness and composition of interfacial compounds. The study shall lead to the effective strategy for choosing appropriate solder alloy systems to improve the contact property of bismuth telluride-based thermoelectric coolers.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
