We have demonstrated a self-aligned process to fabricate organized iron nanowires on a planarized surface with wire dimensions down to Equation or symbol description not available50nm. Polishing was used to expose an alternating silicon silicon dioxide edge and a dual selective metal deposition process produced the nanowires. The initial selective deposition produced a tungsten layer on the exposed polysilicon regions. The discovery that selective chemical vapor deposition of iron from Equation or symbol description not availableFe(CO)5 precursor on dielectric surfaces over tungsten surfaces is the key factor that enables the self-alignment of the iron nanowires. Dimensions of the wires are determined by the thickness of the thermal oxide.