Metal-gate work function Equation or symbol description not availableΦm modulation using Hf alloys was achieved by the interdiffusion of bilayer metallic films each with a thickness of less than or equal to Equation or symbol description not available10nm. For a bilayer stack comprising a Hf layer on a Ni layer, varying the Equation or symbol description not availableHf∕Ni metal thickness ratio from 0 (single-layer Ni stack) to 1.4 achieved Equation or symbol description not availableΦm tunability from 4.74 to Equation or symbol description not available4.2eV after forming gas anneal (FGA) at Equation or symbol description not available420°C. Interdiffusion in Equation or symbol description not availableHf∕Pt stack and Equation or symbol description not availablePt∕Pt–Hf stack was also explored, and the largest Equation or symbol description not availableΦm shift of Equation or symbol description not available∼0.5eV from single-layer Pt and Equation or symbol description not availablePt–Hf stack, respectively, was obtained after annealing at Equation or symbol description not available700°C for Equation or symbol description not available30s. The observed Equation or symbol description not availableΦm shift correlated to the extent of metal interdiffusion and was found to be strongly dependent on the metal thickness and anneal temperature. The Equation or symbol description not availableHf∕Pt stack was further employed to demonstrate Equation or symbol description not availableΦm tunability of thin interdiffused metal layers on Equation or symbol description not availableHfO2 and Equation or symbol description not availableHfLaOx high-Equation or symbol description not availablek gate dielectrics. Through process optimization, the interdiffusion of thin metallic layers allows precise dual-gate Equation or symbol description not availableΦm control for advanced transistors.