A negative electrode consisting of Laves-phase alloy particles with a composition of Equation or symbol description not availableZr0.9Ti0.1Ni1.1Co0.1Mn0.5V0.2Cr0.1 requires more than 20 activation cycles to attain a nominal discharge capacity (ca. Equation or symbol description not available350mAhg−1). The activation cycles could be reduced to several times only by mechanical modification with planetary ballmilling and further shortened by mechanochemical modification using a small amount of Al or Mg powder as a modifier. Such mechanical and mechanochemical modifications are also effective for improving high-rate dischargeability. The best result was obtained by grinding the Laves-phase alloy with Equation or symbol description not available1wt% modifier for Equation or symbol description not available1h at Equation or symbol description not available300rpm. The reason for quick activation and improved high-rate dischargeability is discussed on the basis of electrochemical impedance, crystallographic structure, particle size, and specific surface area.