Abstract
The microloading effect in the anisotropic wet etching of
is quantitatively studied for distributed feedback‐LD grating fabrication. In this study, 240 nm pitch gratings based on resist patterns with various space widths defined by E‐beam lithography were etched in saturated bromine water (SBW) and hydrobromic acid
. The etched depth and the shape show a clear dependence on the space width, and this microloading effect can be explained by the diffusion of the reactant, the length of which is comparable to the grating size. Dry‐etching is found to reduce the loading effect. The wet etching model and controllability of the coupling coefficient for DFB‐LD gratings are discussed.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
