Abstract
Tin-based alloy/carbonaceous composite materials are attractions for Li-ion rechargeable batteries because of their high capacity. A novel Ni–Sn–P mesocarbon microbead (MCMB) composite material for lithium-ion batteries was prepared by an electroless plating method. On the basis of X-ray color mapping analysis by electron probe microanalyzer, the nanosize Ni–Sn–P was precipitated not only on the surface but in the interior of MCMB powders. The Ni–Sn–P/MCMB composite anode exhibited large capacity (
in the tenth cycle) and the coulombic efficiency of the Ni–Sn–P/MCMB anode is as high as 98% even after the twenty-fifth cycle. In addition, the Ni–Sn–P/MCMB composite anode showed a significant improvement in electrochemical performance. Therefore, the Ni–Sn–P/MCMB provides a new type of anode material for lithium-ion batteries with an enhanced capacity.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
