Abstract
In this study, Al-doped ZnO (AZO) and
films were deposited on p-type GaN films followed by thermal annealing to form ohmic contacts. After thermal annealing, the resistivities of AZO films reduced from
to
. Both as-deposited AZO and
contacts on p-GaN displayed a non-ohmic characteristic. Only the 800°C-annealed
contacts exhibited a linear current–voltage characteristic, showing a specific contact resistance of around
. After undergoing the annealing in nitrogen ambience, the light transmittance of the
films increased from 70% to higher than 90% in the visible range. These results revealed that the
contact can serve as a suitable transparent current spreading layer for the fabrication of GaN-based light-emitting devices.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
