Effects of manganese and carbon on oxidation properties of simulated Incoloy 800 were determined. Iron‐base alloys containing 32% nickel and 23% chromium were prepared with 0, 1, or 2% manganese and residual (0.002%) or 0.1% carbon. Samples were exposed at 660°C to 0.94 atm steam for 2, 48, 528 hr, and resulting oxides were examined by optical microscopy and analyzed using Secondary Ion Mass Spectrometry(SIMS) as well as x‐ray diffraction techniques. Carbon additions in all cases led to thicker oxides with higher Equation or symbol description not availableαFe2O3 to Equation or symbol description not availableCr2O3 ratios. Manganese was incorporated into the spinel phase, forming Equation or symbol description not availableMn(Fe1−xCrx)2O4. Manganese additions to alloys containing carbon tended to mitigate the effects of carbon additions, leading to thinner oxides with lower Equation or symbol description not availableαFe2O3 to Equation or symbol description not availableCr2O3 ratios.