Semiconductor bulk samples, suitable for characterization of electronic properties, have been made by simultaneous deep patterned mesa etching from opposing faces of polished wafers. Outlines of the samples to be produced were delineated by areas of hard‐baked photoresist on those faces, with mirror‐image masks aligned for the two opposing faces. Sample outlines thus created included the well‐known “bridge‐shaped” and “clover‐shaped” forms used for electrical characterization. The etching action was quenched when canyons etched from the two faces met, releasing individual sample shapes. An Equation or symbol description not availableH2SO4/H2O2/H2O etch was used in making Equation or symbol description not availableGaAs samples, from polished wafers of (100), (110), (111), and (211) orientations; wafers of thickness in the range 0.2–0.5 mm could be used without excessive undercutting. Preliminary results are reported for silicon samples made by this method, using an Equation or symbol description not availableHNO3/HF/H2O etch.