An investigation of cleaning procedures prior to metal gate evaporation in Equation or symbol description not availableGaAs MESFET fabrication was undertaken. A photoresist residue was found to exist after development when using the lift‐off technique to define the gate metal pattern. This carbon residue was identified by AES depth profile measurements. Schottky diode electrical characteristics were observed to deteriorate due to this residue. Of the cleaning solutions examined, only the Equation or symbol description not availableNH4OH solution removed both C and O layers on the Equation or symbol description not availableGaAs surface while still being compatible with the fabrication process. The effects of DI Equation or symbol description not availableH2O rinse time on Schottky diode electrical performance were also examined.